mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH v2 21/29] mci: dw_mmc: match against StarFive MMC compatibles
Date: Sat, 19 Jun 2021 06:50:47 +0200	[thread overview]
Message-ID: <20210619045055.779-22-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20210619045055.779-1-a.fatoum@pengutronix.de>

The Linux driver in v5.13 doesn't determine min and max frequency from
clk_ciu, instead it consults the clock-frequency property in the device
tree. We will want to follow the Linux way for the StarFive, especially
because clk_get_rate returns bogus results for the JH7100, because the
clock tree doesn't yet describe enough information to calculate rates.

Add a compatible that does the necessary things as well as a generic
snps,dw-mshc compatible, like what the vendor device tree uses. The hope
is, that with complete clock tree described, we can drop the
starfive,jh7100-dw-mshc compatible check in future and use the generic
compatible instead.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/mci/dw_mmc.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/mci/dw_mmc.c b/drivers/mci/dw_mmc.c
index ad1d2a06b914..b402090ab3cb 100644
--- a/drivers/mci/dw_mmc.c
+++ b/drivers/mci/dw_mmc.c
@@ -32,7 +32,7 @@ struct dwmci_host {
 	unsigned int fifo_size_bytes;
 
 	struct dwmci_idmac *idmac;
-	unsigned long clkrate;
+	u32 clkrate;
 	int ciu_div;
 	u32 fifoth_val;
 	u32 pwren_value;
@@ -572,7 +572,7 @@ static int dw_mmc_probe(struct device_d *dev)
 
 	rst = reset_control_get(dev, "reset");
 	if (IS_ERR(rst)) {
-		dev_warn(dev, "error claiming reset: %pe\n", rst);
+		return PTR_ERR(rst);
 	} else if (rst) {
 		reset_control_assert(rst);
 		udelay(10);
@@ -617,7 +617,11 @@ static int dw_mmc_probe(struct device_d *dev)
 	else
 		host->pwren_value = 1;
 
-	host->clkrate = clk_get_rate(host->clk_ciu);
+	if (of_device_is_compatible(dev->device_node, "starfive,jh7100-dw-mshc"))
+		of_property_read_u32(dev->device_node, "clock-frequency", &host->clkrate);
+	if (!host->clkrate)
+		host->clkrate = clk_get_rate(host->clk_ciu);
+
 	host->mci.f_min = host->clkrate / 510 / host->ciu_div;
 	if (host->mci.f_min < 200000)
 		host->mci.f_min = 200000;
@@ -635,6 +639,10 @@ static __maybe_unused struct of_device_id dw_mmc_compatible[] = {
 		.compatible = "rockchip,rk2928-dw-mshc",
 	}, {
 		.compatible = "rockchip,rk3288-dw-mshc",
+	}, {
+		.compatible = "snps,dw-mshc",
+	}, {
+		.compatible = "starfive,jh7100-dw-mshc",
 	}, {
 		/* sentinel */
 	}
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  parent reply	other threads:[~2021-06-19  4:57 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-19  4:50 [PATCH v2 00/29] RISC-V: add BeagleV Beta board support Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 01/29] clocksource: RISC-V: demote probe success messages to debug level Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 02/29] RISC-V: virt: select only one timer Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 03/29] RISC-V: extend multi-image to support both S- and M-Mode Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 04/29] RISC-V: cpuinfo: return some output for non-SBI systems as well Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 05/29] RISC-V: S-Mode: propagate Hart ID Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 06/29] RISC-V: erizo: make it easier to reuse ns16550 debug_ll Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 07/29] RISC-V: socs: add Kconfig entry for StarFive JH7100 Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 08/29] nvmem: add StarFive OTP support Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 09/29] RISC-V: dma: support multiple dma_alloc_coherent backends Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 10/29] RISC-V: add exception support Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 11/29] RISC-V: support incoherent I-Cache Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 12/29] drivers: soc: sifive: add basic L2 cache controller driver Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 13/29] soc: starfive: add support for JH7100 incoherent interconnect Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 14/29] soc: sifive: l2_cache: enable maximum available cache ways Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 15/29] net: designware: fix non-1:1 mapped 64-bit systems Ahmad Fatoum
2021-06-21  7:25   ` Sascha Hauer
2021-06-21  7:33     ` Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 16/29] net: designware: add support for IP integrated into StarFive SoC Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 17/29] mci: allocate DMA-able memory Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 18/29] mci: allocate sector_buf on demand Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 19/29] dma: allocate 32-byte aligned buffers by default Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 20/29] mci: dw_mmc: add optional reset line Ahmad Fatoum
2021-06-19  4:50 ` Ahmad Fatoum [this message]
2021-06-19  4:50 ` [PATCH v2 22/29] clk: add initial StarFive clock support Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 23/29] reset: add StarFive reset controller driver Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 24/29] watchdog: add StarFive watchdog driver Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 25/29] hw_random: add driver for RNG on StarFive SoC Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 26/29] reset: add device_reset_all helper Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 27/29] gpio: add support for StarFive GPIO controller Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 28/29] misc: add power sequencing driver for initializing StarFive peripherals Ahmad Fatoum
2021-06-19  4:50 ` [PATCH v2 29/29] RISC-V: StarFive: add board support for BeagleV Starlight Ahmad Fatoum
2021-06-21  9:11 ` [PATCH v2 00/29] RISC-V: add BeagleV Beta board support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210619045055.779-22-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox