mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH v2] firmware: socfpga: set APPLYCFG after loading bitstream
Date: Fri, 25 Jun 2021 10:59:44 +0200	[thread overview]
Message-ID: <20210625085944.11260-1-s.trumtrar@pengutronix.de> (raw)

To make changes to the SDRAM controller effective, the APPLYCFG bit must
be set after programming the bitstream to the FPGA. This has to be done
without any SDRAM usage. Therefore copy the function to execute to the
OCRAM and execute it from there.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---

Notes:
    v1: Link: https://lore.barebox.org/20210618080939.15343-2-s.trumtrar@pengutronix.de
    
    Changes since v1:
      - include feedback from Ahmad

 .../mach-socfpga/include/mach/cyclone5-regs.h |  1 +
 drivers/firmware/Makefile                     |  2 +-
 drivers/firmware/socfpga.c                    | 21 +++++++++++++++++++
 drivers/firmware/socfpga_sdr.S                | 20 ++++++++++++++++++
 4 files changed, 43 insertions(+), 1 deletion(-)
 create mode 100644 drivers/firmware/socfpga_sdr.S

diff --git a/arch/arm/mach-socfpga/include/mach/cyclone5-regs.h b/arch/arm/mach-socfpga/include/mach/cyclone5-regs.h
index e88daf718917..1a7d787a27bf 100644
--- a/arch/arm/mach-socfpga/include/mach/cyclone5-regs.h
+++ b/arch/arm/mach-socfpga/include/mach/cyclone5-regs.h
@@ -18,5 +18,6 @@
 #define CYCLONE5_SYSMGR_ADDRESS		0xffd08000
 #define CYCLONE5_SCANMGR_ADDRESS	0xfff02000
 #define CYCLONE5_SMP_TWD_ADDRESS	0xfffec600
+#define CYCLONE5_OCRAM_ADDRESS		0xffff0000
 
 #endif /* __MACH_SOCFPGA_REGS_H */
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index b162b08b0a80..bbd2bcda9780 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -1,3 +1,3 @@
 obj-$(CONFIG_FIRMWARE_ALTERA_SERIAL) += altera_serial.o
-obj-$(CONFIG_FIRMWARE_ALTERA_SOCFPGA) += socfpga.o
+obj-$(CONFIG_FIRMWARE_ALTERA_SOCFPGA) += socfpga.o socfpga_sdr.o
 obj-$(CONFIG_FIRMWARE_ZYNQMP_FPGA) += zynqmp-fpga.o
diff --git a/drivers/firmware/socfpga.c b/drivers/firmware/socfpga.c
index 61c2b02eca42..b16bd33de408 100644
--- a/drivers/firmware/socfpga.c
+++ b/drivers/firmware/socfpga.c
@@ -39,6 +39,9 @@
 #include <mach/cyclone5-reset-manager.h>
 #include <mach/cyclone5-regs.h>
 #include <mach/cyclone5-sdram.h>
+#include <asm/fncpy.h>
+#include <mmu.h>
+#include <asm/cache.h>
 
 #define FPGAMGRREGS_STAT			0x0
 #define FPGAMGRREGS_CTRL			0x4
@@ -78,6 +81,10 @@
 #define CDRATIO_x4	0x2
 #define CDRATIO_x8	0x3
 
+extern void socfpga_sdram_apply_static_cfg(void __iomem *sdrctrlgrp);
+extern void socfpga_sdram_apply_static_cfg_end(void *);
+extern const u32 socfpga_sdram_apply_static_cfg_sz;
+
 struct fpgamgr {
 	struct firmware_handler fh;
 	struct device_d dev;
@@ -345,6 +352,7 @@ static int socfpga_fpgamgr_program_finish(struct firmware_handler *fh)
 {
 	struct fpgamgr *mgr = container_of(fh, struct fpgamgr, fh);
 	int status;
+	void (*ocram_func)(void __iomem *ocram_base);
 
 	/* Ensure the FPGA entering config done */
 	status = socfpga_fpgamgr_program_poll_cd(mgr);
@@ -374,6 +382,19 @@ static int socfpga_fpgamgr_program_finish(struct firmware_handler *fh)
 		return status;
 	}
 
+	remap_range((void *)CYCLONE5_OCRAM_ADDRESS, PAGE_SIZE, MAP_CACHED);
+
+	dev_dbg(&mgr->dev, "Setting APPLYCFG bit...\n");
+
+	ocram_func = fncpy((void __iomem *)CYCLONE5_OCRAM_ADDRESS,
+			   &socfpga_sdram_apply_static_cfg,
+			   socfpga_sdram_apply_static_cfg_sz);
+
+	sync_caches_for_execution();
+
+	ocram_func((void __iomem *) (CYCLONE5_SDR_ADDRESS +
+				     SDR_CTRLGRP_STATICCFG_ADDRESS));
+
 	return 0;
 }
 
diff --git a/drivers/firmware/socfpga_sdr.S b/drivers/firmware/socfpga_sdr.S
new file mode 100644
index 000000000000..b895fb293cbd
--- /dev/null
+++ b/drivers/firmware/socfpga_sdr.S
@@ -0,0 +1,20 @@
+#include <linux/linkage.h>
+
+	.arch	armv7-a
+	.arm
+
+/*
+ * r0 : sdram controller staticcfg
+ */
+
+ENTRY(socfpga_sdram_apply_static_cfg)
+	push {ip,lr}
+	ldr r1, [r0]
+	orr r1, r1, #8
+	str r1, [r0]
+	pop {ip,pc}
+	.align
+ENDPROC(socfpga_sdram_apply_static_cfg)
+
+ENTRY(socfpga_sdram_apply_static_cfg_sz)
+	.word . - socfpga_sdram_apply_static_cfg;
-- 
2.30.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


             reply	other threads:[~2021-06-25 10:01 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-25  8:59 Steffen Trumtrar [this message]
2021-06-28 11:28 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210625085944.11260-1-s.trumtrar@pengutronix.de \
    --to=s.trumtrar@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --subject='Re: [PATCH v2] firmware: socfpga: set APPLYCFG after loading bitstream' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox