From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH next 1/3] RISC-V: make it possible to run nmon from PBL C code
Date: Thu, 8 Jul 2021 11:30:33 +0300 [thread overview]
Message-ID: <20210708083035.40814-2-antonynpavlov@gmail.com> (raw)
In-Reply-To: <20210708083035.40814-1-antonynpavlov@gmail.com>
After migrating to PBL we can't use nmon assembler macro
in C code anymore. Some changes are introduced to invoke
nmon from PBL C code:
* use 'lla' macro instruction instead of 'la';
* don't touch the 'ra' register, use 'a2' instead;
* add wrapper C function for nmon.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
arch/riscv/boot/Makefile | 1 +
arch/riscv/boot/nmon_entry.S | 13 ++++++++
arch/riscv/include/asm/riscv_nmon.h | 49 +++++++++++++++++++----------
3 files changed, 46 insertions(+), 17 deletions(-)
diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
index 968a826d16..80f63a4a0a 100644
--- a/arch/riscv/boot/Makefile
+++ b/arch/riscv/boot/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += start.o
pbl-y += entry.o uncompress.o
+pbl-y += nmon_entry.o
pbl-$(CONFIG_BOARD_GENERIC_DT) += board-dt-2nd.o
diff --git a/arch/riscv/boot/nmon_entry.S b/arch/riscv/boot/nmon_entry.S
new file mode 100644
index 0000000000..ae017d2a1c
--- /dev/null
+++ b/arch/riscv/boot/nmon_entry.S
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+#include <asm/sections.h>
+
+#include "asm/debug_ll.h"
+#include "asm/riscv_nmon.h"
+
+.section .text_bare_init
+
+ENTRY(__barebox_nmon_entry)
+ riscv_nmon
+ ret
+ENDPROC(__barebox_nmon_entry)
diff --git a/arch/riscv/include/asm/riscv_nmon.h b/arch/riscv/include/asm/riscv_nmon.h
index caf213cdd8..8a44e216d7 100644
--- a/arch/riscv/include/asm/riscv_nmon.h
+++ b/arch/riscv/include/asm/riscv_nmon.h
@@ -16,13 +16,26 @@
#ifndef __ASM_RISCV_NMON_H
#define __ASM_RISCV_NMON_H
+#include <linux/kconfig.h>
+
#define CODE_ESC 0x1b
+#ifndef __ASSEMBLY__
+
+extern void __barebox_nmon_entry(void);
+
+static inline void barebox_nmon_entry(void)
+{
+ if (IS_ENABLED(CONFIG_NMON))
+ __barebox_nmon_entry();
+}
+
+#else
+
.macro nmon_outs msg
- la a1, \msg
-
- jal _nmon_outs
+ lla a1, \msg
+ jal a2, _nmon_outs
.endm
@@ -73,7 +86,7 @@ nmon_main:
li a0, 'q'
bne s0, a0, 3f
- jal _nmon_outc_a0
+ jal a2, _nmon_outc_a0
j nmon_exit
@@ -90,12 +103,12 @@ nmon_main:
j nmon_main_help
nmon_cmd_d:
- jal _nmon_outc_a0
+ jal a2, _nmon_outc_a0
li a0, ' '
- jal _nmon_outc_a0
+ jal a2, _nmon_outc_a0
- jal _nmon_gethexw
+ jal a2, _nmon_gethexw
nmon_outs msg_nl
@@ -105,28 +118,28 @@ nmon_cmd_d:
j nmon_main
nmon_cmd_w:
- jal _nmon_outc_a0
+ jal a2, _nmon_outc_a0
li a0, ' '
- jal _nmon_outc_a0
+ jal a2, _nmon_outc_a0
- jal _nmon_gethexw
+ jal a2, _nmon_gethexw
move s2, s0
li a0, ' '
- jal _nmon_outc_a0
- jal _nmon_gethexw
+ jal a2, _nmon_outc_a0
+ jal a2, _nmon_gethexw
sw s0, 0(s2)
j nmon_main
nmon_cmd_g:
- jal _nmon_outc_a0
+ jal a2, _nmon_outc_a0
li a0, ' '
- jal _nmon_outc_a0
+ jal a2, _nmon_outc_a0
- jal _nmon_gethexw
+ jal a2, _nmon_gethexw
move s2, s0
nmon_outs msg_nl
@@ -136,7 +149,7 @@ nmon_cmd_g:
_nmon_outc_a0:
debug_ll_outc_a0
- jr ra
+ jr a2
_nmon_outs:
@@ -202,7 +215,7 @@ _get_hex_digit:
move s0, t2
_nmon_jr_ra_exit:
- jr ra
+ jr a2
msg_prompt:
.asciz "\r\nnmon> "
@@ -231,4 +244,6 @@ nmon_exit:
.endm
+#endif /* __ASSEMBLY__ */
+
#endif /* __ASM_RISCV_NMON_H */
--
2.32.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-07-08 8:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-08 8:30 [PATCH next 0/3] RISC-V: resurrect nmon Antony Pavlov
2021-07-08 8:30 ` Antony Pavlov [this message]
2021-07-08 8:30 ` [PATCH next 2/3] RISC-V: boards: erizo: make it possible to use nmon Antony Pavlov
2021-07-08 8:30 ` [PATCH next 3/3] RISC-V: boards: beaglev: " Antony Pavlov
2021-07-09 20:58 ` [PATCH next 0/3] RISC-V: resurrect nmon Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210708083035.40814-2-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox