mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes
@ 2021-09-09 12:09 Oleksij Rempel
  2021-09-09 12:09 ` [PATCH v2 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node Oleksij Rempel
                   ` (5 more replies)
  0 siblings, 6 replies; 7+ messages in thread
From: Oleksij Rempel @ 2021-09-09 12:09 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

We need USB working to make use of USB ethernet adapters.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/dts/imx6qdl-skov-imx6.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/dts/imx6qdl-skov-imx6.dtsi b/arch/arm/dts/imx6qdl-skov-imx6.dtsi
index 03f3cb02fc..371a931e53 100644
--- a/arch/arm/dts/imx6qdl-skov-imx6.dtsi
+++ b/arch/arm/dts/imx6qdl-skov-imx6.dtsi
@@ -273,6 +273,26 @@
 	remote-endpoint = <&display0_in>;
 };
 
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* no usbh2 */
+&usbphynop1 {
+	status = "disabled";
+};
+
+/* no usbh3 */
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
-- 
2.30.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node
  2021-09-09 12:09 [PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes Oleksij Rempel
@ 2021-09-09 12:09 ` Oleksij Rempel
  2021-09-09 12:09 ` [PATCH v2 3/7] ARM: boards: skov-imx6: add switch detection Oleksij Rempel
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Oleksij Rempel @ 2021-09-09 12:09 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

This will be needed by the next patch

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boards/skov-imx6/board.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c
index a58172b2b1..030ac62c52 100644
--- a/arch/arm/boards/skov-imx6/board.c
+++ b/arch/arm/boards/skov-imx6/board.c
@@ -432,16 +432,18 @@ static void skov_init_board(const struct board_description *variant)
 	}
 }
 
-static void fixup_machine_compatible(const char *compat)
+static void fixup_machine_compatible(const char *compat,
+				     struct device_node *root)
 {
 	const char *curcompat;
-	struct device_node *root;
 	int cclen = 0, clen = strlen(compat) + 1;
 	void *buf;
 
-	root = of_get_root_node();
-	if (!root)
-		return;
+	if (!root) {
+		root = of_get_root_node();
+		if (!root)
+			return;
+	}
 
 	curcompat = of_get_property(root, "compatible", &cclen);
 
@@ -487,7 +489,7 @@ static int skov_imx6_probe(struct device_d *dev)
 	globalvar_add_simple("board.dts", variant->dts_compatible);
 	globalvar_add_simple("board.display", variant->display ?: NULL);
 
-	fixup_machine_compatible(variant->dts_compatible);
+	fixup_machine_compatible(variant->dts_compatible, NULL);
 
 	skov_init_board(variant);
 
-- 
2.30.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 3/7] ARM: boards: skov-imx6: add switch detection
  2021-09-09 12:09 [PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes Oleksij Rempel
  2021-09-09 12:09 ` [PATCH v2 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node Oleksij Rempel
@ 2021-09-09 12:09 ` Oleksij Rempel
  2021-09-09 12:09 ` [PATCH v2 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected Oleksij Rempel
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Oleksij Rempel @ 2021-09-09 12:09 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

There are board variants with same board ID but not switch. Detect this
variants.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boards/skov-imx6/board.c | 159 +++++++++++++++++++++++++-----
 1 file changed, 135 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c
index 030ac62c52..2bd21adaeb 100644
--- a/arch/arm/boards/skov-imx6/board.c
+++ b/arch/arm/boards/skov-imx6/board.c
@@ -11,6 +11,7 @@
 #include <net.h>
 #include <of_gpio.h>
 #include <gpio.h>
+#include <linux/micrel_phy.h>
 
 #include "version.h"
 
@@ -130,6 +131,9 @@ copy_mac_from_eth0:
 	return eth_of_fixup_node_from_eth_device(root, node_path, ethname);
 }
 
+#define SKOV_GPIO_MDIO_BUS	0
+#define SKOV_LAN1_PHY_ADDR	1
+
 #define MAX_V_GPIO 8
 
 struct board_description {
@@ -303,20 +307,121 @@ static const struct board_description imx6_variants[] = {
 };
 
 static int skov_board_no = -1;
+static bool skov_no_switch = false;
+static const char *no_switch_suffix = "-noswitch";
 
-static int skov_imx6_fixup(struct device_node *root, void *unused)
+static void fixup_machine_compatible(const char *compat,
+				     struct device_node *root)
 {
+	int cclen = 0, clen = strlen(compat) + 1;
+	const char *curcompat;
+	void *buf;
+
+	if (!root) {
+		root = of_get_root_node();
+		if (!root)
+			return;
+	}
+
+	curcompat = of_get_property(root, "compatible", &cclen);
+
+	buf = xzalloc(cclen + clen);
+
+	memcpy(buf, compat, clen);
+	memcpy(buf + clen, curcompat, cclen);
+
+	/*
+	 * Prepend the compatible from board entry to the machine compatible.
+	 * Used to match bootspec entries against it.
+	 */
+	of_set_property(root, "compatible", buf, cclen + clen, true);
+
+	free(buf);
+}
+
+static void fixup_noswitch_machine_compatible(struct device_node *root)
+{
+	const char *compat = imx6_variants[skov_board_no].dts_compatible;
+	const char *generic = "skov,imx6";
+	size_t size, size_generic;
+	char *buf;
 	int ret;
-	const char *val;
-	uint32_t brightness;
+
+	size = strlen(compat) + strlen(no_switch_suffix) + 1;
+	size_generic = strlen(generic) + strlen(no_switch_suffix) + 1;
+	size = max(size, size_generic);
+	buf = xzalloc(size);
+	if (!buf) {
+		pr_warn("Can't allocate buffer\n");
+		return;
+	}
+
+	/* add generic compatible, so systemd&co can make right decisions */
+	ret = snprintf(buf, size, "%s%s", generic, no_switch_suffix);
+	if (ret >= 0)
+		fixup_machine_compatible(buf, root);
+	else
+		pr_warn("Can't prepare generic compatible string\n");
+
+	/* add specific compatible as fallback, in case this board has new
+	 * challenges.
+	 */
+	ret = snprintf(buf, size, "%s%s", compat, no_switch_suffix);
+	if (ret >= 0)
+		fixup_machine_compatible(buf, root);
+	else
+		pr_warn("Can't prepare specific compatible string\n");
+
+	free(buf);
+}
+
+static void skov_imx6_no_switch(struct device_node *root)
+{
 	struct device_node *node;
-	struct device_node *chosen = of_create_node(root, "/chosen");
+	int ret;
+
+	fixup_noswitch_machine_compatible(root);
 
+	node = of_find_node_by_path_from(root, "/soc/bus@2100000/ethernet@2188000");
+	if (!node) {
+		pr_warn("Did not find node to disable it\n");
+	} else {
+		ret = of_device_disable(node);
+		if (ret)
+			pr_warn("Can't disable ethernet node\n");
+	}
+
+	node = of_find_node_by_alias(root, "mdio-gpio0");
+	if (node) {
+		ret = of_device_disable(node);
+		if (ret)
+			pr_warn("Can't disable mdio-gpio0 node\n");
+	} else {
+		pr_warn("Can't find mdio-gpio0 node\n");
+	}
+}
+
+static void skov_imx6_switch(struct device_node *root)
+{
 	eth_of_fixup_node_from_eth_device(root,
 			"/mdio-gpio/ksz8873@3/ports/ports@0", "eth0");
 	eth2_of_fixup_node_individually(root,
 		"/mdio-gpio/ksz8873@3/ports/ports@1", "eth0",
 		"state.ethaddr.eth2", "/state/ethaddr/eth2");
+}
+
+static int skov_imx6_fixup(struct device_node *root, void *unused)
+{
+	struct device_node *chosen = of_create_node(root, "/chosen");
+	struct device_node *node;
+	uint32_t brightness;
+	const char *val;
+	int ret;
+
+	if (skov_no_switch)
+		skov_imx6_no_switch(root);
+	else
+		skov_imx6_switch(root);
 
 	switch (bootsource_get()) {
 	case BOOTSOURCE_MMC:
@@ -432,34 +537,40 @@ static void skov_init_board(const struct board_description *variant)
 	}
 }
 
-static void fixup_machine_compatible(const char *compat,
-				     struct device_node *root)
+static int skov_switch_test(void)
 {
-	const char *curcompat;
-	int cclen = 0, clen = strlen(compat) + 1;
-	void *buf;
+	struct phy_device *phydev;
+	struct mii_bus *mii;
+	int ret;
 
-	if (!root) {
-		root = of_get_root_node();
-		if (!root)
-			return;
-	}
+	if (skov_board_no < 0)
+		return 0;
 
-	curcompat = of_get_property(root, "compatible", &cclen);
+	/* On this boards, we have only one MDIO bus. So, it is enough to take
+	 * the first one.
+	 */
+	mii = mdiobus_get_bus(SKOV_GPIO_MDIO_BUS);
+	/* We can't read the switch ID, but we get get ID of the first PHY,
+	 * which is enough to test if the switch is attached.
+	 */
+	phydev = get_phy_device(mii, SKOV_LAN1_PHY_ADDR);
+	if (IS_ERR(phydev))
+		goto no_switch;
 
-	buf = xzalloc(cclen + clen);
+	if (phydev->phy_id != PHY_ID_KSZ886X)
+		goto no_switch;
 
-	memcpy(buf, compat, clen);
-	memcpy(buf + clen, curcompat, cclen);
+	return 0;
 
-	/*
-	 * Prepend the compatible from board entry to the machine compatible.
-	 * Used to match bootspec entries against it.
-	 */
-	of_set_property(root, "compatible", buf, cclen + clen, true);
+no_switch:
+	skov_no_switch = true;
+	fixup_noswitch_machine_compatible(NULL);
 
-	free(buf);
+	pr_notice("No-switch variant is detected\n");
+
+	return 0;
 }
+late_initcall(skov_switch_test);
 
 static int skov_imx6_probe(struct device_d *dev)
 {
-- 
2.30.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected
  2021-09-09 12:09 [PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes Oleksij Rempel
  2021-09-09 12:09 ` [PATCH v2 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node Oleksij Rempel
  2021-09-09 12:09 ` [PATCH v2 3/7] ARM: boards: skov-imx6: add switch detection Oleksij Rempel
@ 2021-09-09 12:09 ` Oleksij Rempel
  2021-09-09 12:09 ` [PATCH v2 5/7] ARM: boards: skov-imx6: fixup different DTS variants Oleksij Rempel
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Oleksij Rempel @ 2021-09-09 12:09 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boards/skov-imx6/board.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c
index 2bd21adaeb..c4665c2b45 100644
--- a/arch/arm/boards/skov-imx6/board.c
+++ b/arch/arm/boards/skov-imx6/board.c
@@ -540,6 +540,7 @@ static void skov_init_board(const struct board_description *variant)
 static int skov_switch_test(void)
 {
 	struct phy_device *phydev;
+	struct device_d *eth0;
 	struct mii_bus *mii;
 	int ret;
 
@@ -568,6 +569,15 @@ no_switch:
 
 	pr_notice("No-switch variant is detected\n");
 
+	eth0 = get_device_by_name("eth0");
+	if (eth0) {
+		ret = dev_set_param(eth0, "mode", "disabled");
+		if (ret)
+			pr_warn("Can't set eth0 mode\n");
+	} else {
+		pr_warn("Can't disable eth0\n");
+	}
+
 	return 0;
 }
 late_initcall(skov_switch_test);
-- 
2.30.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 5/7] ARM: boards: skov-imx6: fixup different DTS variants
  2021-09-09 12:09 [PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes Oleksij Rempel
                   ` (2 preceding siblings ...)
  2021-09-09 12:09 ` [PATCH v2 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected Oleksij Rempel
@ 2021-09-09 12:09 ` Oleksij Rempel
  2021-09-09 12:09 ` [PATCH v2 6/7] ARM: boards: skov-imx6: start using deep-probe Oleksij Rempel
  2021-09-09 12:09 ` [PATCH v2 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script Oleksij Rempel
  5 siblings, 0 replies; 7+ messages in thread
From: Oleksij Rempel @ 2021-09-09 12:09 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boards/skov-imx6/board.c | 47 +++++++++++++++++++++++++++----
 1 file changed, 42 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c
index c4665c2b45..fea840aa33 100644
--- a/arch/arm/boards/skov-imx6/board.c
+++ b/arch/arm/boards/skov-imx6/board.c
@@ -401,13 +401,50 @@ static void skov_imx6_no_switch(struct device_node *root)
 	}
 }
 
+static int skov_imx6_switch_port(struct device_node *root, const char *path)
+{
+	size_t size;
+	char *buf;
+	int ret;
+
+	size = strlen(path) + 1;
+	buf = xzalloc(size);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = snprintf(buf, size, "%s0", path);
+	if (ret < 0)
+		return ret;
+
+	ret = eth_of_fixup_node_from_eth_device(root, buf, "eth0");
+	if (ret)
+		return ret;
+
+	ret = snprintf(buf, size, "%s1", path);
+	if (ret < 0)
+		return ret;
+
+	ret = eth2_of_fixup_node_individually(root, buf, "eth0",
+					      "state.ethaddr.eth2",
+					      "/state/ethaddr/eth2");
+	return ret;
+}
+
 static void skov_imx6_switch(struct device_node *root)
 {
-	eth_of_fixup_node_from_eth_device(root,
-			"/mdio-gpio/ksz8873@3/ports/ports@0", "eth0");
-	eth2_of_fixup_node_individually(root,
-		"/mdio-gpio/ksz8873@3/ports/ports@1", "eth0",
-		"state.ethaddr.eth2", "/state/ethaddr/eth2");
+	const char *old = "/mdio-gpio/ksz8873@3/ports/ports@";
+	const char *new = "/mdio/switch@0/ports/ports@";
+	int ret;
+
+	/* Old DTS variants (pre kernel mainline) use different path. Try first
+	 * the new variant, then fall back to the old one.
+	 */
+	ret = skov_imx6_switch_port(root, new);
+	if (ret) {
+		ret = skov_imx6_switch_port(root, old);
+		if (ret)
+			pr_err("Filed to set mac address\n");
+	}
 }
 
 static int skov_imx6_fixup(struct device_node *root, void *unused)
-- 
2.30.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 6/7] ARM: boards: skov-imx6: start using deep-probe
  2021-09-09 12:09 [PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes Oleksij Rempel
                   ` (3 preceding siblings ...)
  2021-09-09 12:09 ` [PATCH v2 5/7] ARM: boards: skov-imx6: fixup different DTS variants Oleksij Rempel
@ 2021-09-09 12:09 ` Oleksij Rempel
  2021-09-09 12:09 ` [PATCH v2 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script Oleksij Rempel
  5 siblings, 0 replies; 7+ messages in thread
From: Oleksij Rempel @ 2021-09-09 12:09 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

Port Skov boards to the deep-propbe and reduce boot time by 100msec.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boards/skov-imx6/board.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c
index fea840aa33..6cdfc8f24d 100644
--- a/arch/arm/boards/skov-imx6/board.c
+++ b/arch/arm/boards/skov-imx6/board.c
@@ -2,16 +2,17 @@
 
 #define pr_fmt(fmt) "skov-imx6: " fmt
 
+#include <bootsource.h>
 #include <common.h>
-#include <init.h>
-#include <mach/bbu.h>
+#include <deep-probe.h>
 #include <environment.h>
-#include <bootsource.h>
 #include <globalvar.h>
-#include <net.h>
-#include <of_gpio.h>
 #include <gpio.h>
+#include <init.h>
 #include <linux/micrel_phy.h>
+#include <mach/bbu.h>
+#include <net.h>
+#include <of_gpio.h>
 
 #include "version.h"
 
@@ -499,10 +500,20 @@ static int skov_imx6_fixup(struct device_node *root, void *unused)
  */
 static void skov_init_board(const struct board_description *variant)
 {
+	struct device_node *gpio_np = NULL;
 	struct device_node *np;
 	char *environment_path, *envdev;
 	int ret;
 
+	gpio_np = of_find_node_by_name(NULL, "gpio@20b4000");
+	if (gpio_np) {
+		ret = of_device_ensure_probed(gpio_np);
+		if (ret)
+			pr_warn("Can't probe GPIO node\n");
+	} else {
+		pr_warn("Can't get GPIO node\n");
+	}
+
 	imx6_bbu_internal_spi_i2c_register_handler("spiflash", "/dev/m25p0.barebox",
 		BBU_HANDLER_FLAG_DEFAULT);
 
@@ -661,6 +672,7 @@ static __maybe_unused struct of_device_id skov_version_ids[] = {
 		/* sentinel */
 	}
 };
+BAREBOX_DEEP_PROBE_ENABLE(skov_version_ids);
 
 static struct driver_d skov_version_driver = {
 	.name = "skov-imx6",
-- 
2.30.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script
  2021-09-09 12:09 [PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes Oleksij Rempel
                   ` (4 preceding siblings ...)
  2021-09-09 12:09 ` [PATCH v2 6/7] ARM: boards: skov-imx6: start using deep-probe Oleksij Rempel
@ 2021-09-09 12:09 ` Oleksij Rempel
  5 siblings, 0 replies; 7+ messages in thread
From: Oleksij Rempel @ 2021-09-09 12:09 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

Add eth1-discover script to run USB detection if eth0 is disabled. The
eth0 will be automatically disabled if the no on-board switch is
detected.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boards/skov-imx6/Makefile                        | 1 +
 arch/arm/boards/skov-imx6/board.c                         | 3 +++
 .../skov-imx6/defaultenv-skov-imx6/network/eth1-discover  | 8 ++++++++
 3 files changed, 12 insertions(+)
 create mode 100644 arch/arm/boards/skov-imx6/defaultenv-skov-imx6/network/eth1-discover

diff --git a/arch/arm/boards/skov-imx6/Makefile b/arch/arm/boards/skov-imx6/Makefile
index a5e85bc1e1..07b87ff11d 100644
--- a/arch/arm/boards/skov-imx6/Makefile
+++ b/arch/arm/boards/skov-imx6/Makefile
@@ -1,3 +1,4 @@
 obj-y += board.o
 lwl-y += lowlevel.o
 obj-pbl-y += version.o
+bbenv-y += defaultenv-skov-imx6
diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c
index 6cdfc8f24d..9c4cf2667f 100644
--- a/arch/arm/boards/skov-imx6/board.c
+++ b/arch/arm/boards/skov-imx6/board.c
@@ -5,6 +5,7 @@
 #include <bootsource.h>
 #include <common.h>
 #include <deep-probe.h>
+#include <envfs.h>
 #include <environment.h>
 #include <globalvar.h>
 #include <gpio.h>
@@ -662,6 +663,8 @@ static int skov_imx6_probe(struct device_d *dev)
 
 	skov_init_board(variant);
 
+	defaultenv_append_directory(defaultenv_skov_imx6);
+
 	return 0;
 }
 
diff --git a/arch/arm/boards/skov-imx6/defaultenv-skov-imx6/network/eth1-discover b/arch/arm/boards/skov-imx6/defaultenv-skov-imx6/network/eth1-discover
new file mode 100644
index 0000000000..e11a3f9006
--- /dev/null
+++ b/arch/arm/boards/skov-imx6/defaultenv-skov-imx6/network/eth1-discover
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+# Some boards doesn't have a ETH port, but may have USB network attached
+if [ "$eth0.mode" != "disabled" ]; then
+	exit 0;
+fi
+
+usb
-- 
2.30.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2021-09-09 13:33 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-09 12:09 [PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes Oleksij Rempel
2021-09-09 12:09 ` [PATCH v2 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node Oleksij Rempel
2021-09-09 12:09 ` [PATCH v2 3/7] ARM: boards: skov-imx6: add switch detection Oleksij Rempel
2021-09-09 12:09 ` [PATCH v2 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected Oleksij Rempel
2021-09-09 12:09 ` [PATCH v2 5/7] ARM: boards: skov-imx6: fixup different DTS variants Oleksij Rempel
2021-09-09 12:09 ` [PATCH v2 6/7] ARM: boards: skov-imx6: start using deep-probe Oleksij Rempel
2021-09-09 12:09 ` [PATCH v2 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script Oleksij Rempel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox