We need USB working to make use of USB ethernet adapters. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/dts/imx6qdl-skov-imx6.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/dts/imx6qdl-skov-imx6.dtsi b/arch/arm/dts/imx6qdl-skov-imx6.dtsi index 03f3cb02fc..371a931e53 100644 --- a/arch/arm/dts/imx6qdl-skov-imx6.dtsi +++ b/arch/arm/dts/imx6qdl-skov-imx6.dtsi @@ -273,6 +273,26 @@ remote-endpoint = <&display0_in>; }; +&usbh1 { + disable-over-current; + status = "okay"; +}; + +/* no usbh2 */ +&usbphynop1 { + status = "disabled"; +}; + +/* no usbh3 */ +&usbphynop2 { + status = "disabled"; +}; + +&usbotg { + disable-over-current; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; -- 2.30.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
This will be needed by the next patch Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boards/skov-imx6/board.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c index a58172b2b1..030ac62c52 100644 --- a/arch/arm/boards/skov-imx6/board.c +++ b/arch/arm/boards/skov-imx6/board.c @@ -432,16 +432,18 @@ static void skov_init_board(const struct board_description *variant) } } -static void fixup_machine_compatible(const char *compat) +static void fixup_machine_compatible(const char *compat, + struct device_node *root) { const char *curcompat; - struct device_node *root; int cclen = 0, clen = strlen(compat) + 1; void *buf; - root = of_get_root_node(); - if (!root) - return; + if (!root) { + root = of_get_root_node(); + if (!root) + return; + } curcompat = of_get_property(root, "compatible", &cclen); @@ -487,7 +489,7 @@ static int skov_imx6_probe(struct device_d *dev) globalvar_add_simple("board.dts", variant->dts_compatible); globalvar_add_simple("board.display", variant->display ?: NULL); - fixup_machine_compatible(variant->dts_compatible); + fixup_machine_compatible(variant->dts_compatible, NULL); skov_init_board(variant); -- 2.30.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
There are board variants with same board ID but not switch. Detect this variants. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boards/skov-imx6/board.c | 159 +++++++++++++++++++++++++----- 1 file changed, 135 insertions(+), 24 deletions(-) diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c index 030ac62c52..2bd21adaeb 100644 --- a/arch/arm/boards/skov-imx6/board.c +++ b/arch/arm/boards/skov-imx6/board.c @@ -11,6 +11,7 @@ #include <net.h> #include <of_gpio.h> #include <gpio.h> +#include <linux/micrel_phy.h> #include "version.h" @@ -130,6 +131,9 @@ copy_mac_from_eth0: return eth_of_fixup_node_from_eth_device(root, node_path, ethname); } +#define SKOV_GPIO_MDIO_BUS 0 +#define SKOV_LAN1_PHY_ADDR 1 + #define MAX_V_GPIO 8 struct board_description { @@ -303,20 +307,121 @@ static const struct board_description imx6_variants[] = { }; static int skov_board_no = -1; +static bool skov_no_switch = false; +static const char *no_switch_suffix = "-noswitch"; -static int skov_imx6_fixup(struct device_node *root, void *unused) +static void fixup_machine_compatible(const char *compat, + struct device_node *root) { + int cclen = 0, clen = strlen(compat) + 1; + const char *curcompat; + void *buf; + + if (!root) { + root = of_get_root_node(); + if (!root) + return; + } + + curcompat = of_get_property(root, "compatible", &cclen); + + buf = xzalloc(cclen + clen); + + memcpy(buf, compat, clen); + memcpy(buf + clen, curcompat, cclen); + + /* + * Prepend the compatible from board entry to the machine compatible. + * Used to match bootspec entries against it. + */ + of_set_property(root, "compatible", buf, cclen + clen, true); + + free(buf); +} + +static void fixup_noswitch_machine_compatible(struct device_node *root) +{ + const char *compat = imx6_variants[skov_board_no].dts_compatible; + const char *generic = "skov,imx6"; + size_t size, size_generic; + char *buf; int ret; - const char *val; - uint32_t brightness; + + size = strlen(compat) + strlen(no_switch_suffix) + 1; + size_generic = strlen(generic) + strlen(no_switch_suffix) + 1; + size = max(size, size_generic); + buf = xzalloc(size); + if (!buf) { + pr_warn("Can't allocate buffer\n"); + return; + } + + /* add generic compatible, so systemd&co can make right decisions */ + ret = snprintf(buf, size, "%s%s", generic, no_switch_suffix); + if (ret >= 0) + fixup_machine_compatible(buf, root); + else + pr_warn("Can't prepare generic compatible string\n"); + + /* add specific compatible as fallback, in case this board has new + * challenges. + */ + ret = snprintf(buf, size, "%s%s", compat, no_switch_suffix); + if (ret >= 0) + fixup_machine_compatible(buf, root); + else + pr_warn("Can't prepare specific compatible string\n"); + + free(buf); +} + +static void skov_imx6_no_switch(struct device_node *root) +{ struct device_node *node; - struct device_node *chosen = of_create_node(root, "/chosen"); + int ret; + + fixup_noswitch_machine_compatible(root); + node = of_find_node_by_path_from(root, "/soc/bus@2100000/ethernet@2188000"); + if (!node) { + pr_warn("Did not find node to disable it\n"); + } else { + ret = of_device_disable(node); + if (ret) + pr_warn("Can't disable ethernet node\n"); + } + + node = of_find_node_by_alias(root, "mdio-gpio0"); + if (node) { + ret = of_device_disable(node); + if (ret) + pr_warn("Can't disable mdio-gpio0 node\n"); + } else { + pr_warn("Can't find mdio-gpio0 node\n"); + } +} + +static void skov_imx6_switch(struct device_node *root) +{ eth_of_fixup_node_from_eth_device(root, "/mdio-gpio/ksz8873@3/ports/ports@0", "eth0"); eth2_of_fixup_node_individually(root, "/mdio-gpio/ksz8873@3/ports/ports@1", "eth0", "state.ethaddr.eth2", "/state/ethaddr/eth2"); +} + +static int skov_imx6_fixup(struct device_node *root, void *unused) +{ + struct device_node *chosen = of_create_node(root, "/chosen"); + struct device_node *node; + uint32_t brightness; + const char *val; + int ret; + + if (skov_no_switch) + skov_imx6_no_switch(root); + else + skov_imx6_switch(root); switch (bootsource_get()) { case BOOTSOURCE_MMC: @@ -432,34 +537,40 @@ static void skov_init_board(const struct board_description *variant) } } -static void fixup_machine_compatible(const char *compat, - struct device_node *root) +static int skov_switch_test(void) { - const char *curcompat; - int cclen = 0, clen = strlen(compat) + 1; - void *buf; + struct phy_device *phydev; + struct mii_bus *mii; + int ret; - if (!root) { - root = of_get_root_node(); - if (!root) - return; - } + if (skov_board_no < 0) + return 0; - curcompat = of_get_property(root, "compatible", &cclen); + /* On this boards, we have only one MDIO bus. So, it is enough to take + * the first one. + */ + mii = mdiobus_get_bus(SKOV_GPIO_MDIO_BUS); + /* We can't read the switch ID, but we get get ID of the first PHY, + * which is enough to test if the switch is attached. + */ + phydev = get_phy_device(mii, SKOV_LAN1_PHY_ADDR); + if (IS_ERR(phydev)) + goto no_switch; - buf = xzalloc(cclen + clen); + if (phydev->phy_id != PHY_ID_KSZ886X) + goto no_switch; - memcpy(buf, compat, clen); - memcpy(buf + clen, curcompat, cclen); + return 0; - /* - * Prepend the compatible from board entry to the machine compatible. - * Used to match bootspec entries against it. - */ - of_set_property(root, "compatible", buf, cclen + clen, true); +no_switch: + skov_no_switch = true; + fixup_noswitch_machine_compatible(NULL); - free(buf); + pr_notice("No-switch variant is detected\n"); + + return 0; } +late_initcall(skov_switch_test); static int skov_imx6_probe(struct device_d *dev) { -- 2.30.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boards/skov-imx6/board.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c index 2bd21adaeb..c4665c2b45 100644 --- a/arch/arm/boards/skov-imx6/board.c +++ b/arch/arm/boards/skov-imx6/board.c @@ -540,6 +540,7 @@ static void skov_init_board(const struct board_description *variant) static int skov_switch_test(void) { struct phy_device *phydev; + struct device_d *eth0; struct mii_bus *mii; int ret; @@ -568,6 +569,15 @@ no_switch: pr_notice("No-switch variant is detected\n"); + eth0 = get_device_by_name("eth0"); + if (eth0) { + ret = dev_set_param(eth0, "mode", "disabled"); + if (ret) + pr_warn("Can't set eth0 mode\n"); + } else { + pr_warn("Can't disable eth0\n"); + } + return 0; } late_initcall(skov_switch_test); -- 2.30.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boards/skov-imx6/board.c | 47 +++++++++++++++++++++++++++---- 1 file changed, 42 insertions(+), 5 deletions(-) diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c index c4665c2b45..fea840aa33 100644 --- a/arch/arm/boards/skov-imx6/board.c +++ b/arch/arm/boards/skov-imx6/board.c @@ -401,13 +401,50 @@ static void skov_imx6_no_switch(struct device_node *root) } } +static int skov_imx6_switch_port(struct device_node *root, const char *path) +{ + size_t size; + char *buf; + int ret; + + size = strlen(path) + 1; + buf = xzalloc(size); + if (!buf) + return -ENOMEM; + + ret = snprintf(buf, size, "%s0", path); + if (ret < 0) + return ret; + + ret = eth_of_fixup_node_from_eth_device(root, buf, "eth0"); + if (ret) + return ret; + + ret = snprintf(buf, size, "%s1", path); + if (ret < 0) + return ret; + + ret = eth2_of_fixup_node_individually(root, buf, "eth0", + "state.ethaddr.eth2", + "/state/ethaddr/eth2"); + return ret; +} + static void skov_imx6_switch(struct device_node *root) { - eth_of_fixup_node_from_eth_device(root, - "/mdio-gpio/ksz8873@3/ports/ports@0", "eth0"); - eth2_of_fixup_node_individually(root, - "/mdio-gpio/ksz8873@3/ports/ports@1", "eth0", - "state.ethaddr.eth2", "/state/ethaddr/eth2"); + const char *old = "/mdio-gpio/ksz8873@3/ports/ports@"; + const char *new = "/mdio/switch@0/ports/ports@"; + int ret; + + /* Old DTS variants (pre kernel mainline) use different path. Try first + * the new variant, then fall back to the old one. + */ + ret = skov_imx6_switch_port(root, new); + if (ret) { + ret = skov_imx6_switch_port(root, old); + if (ret) + pr_err("Filed to set mac address\n"); + } } static int skov_imx6_fixup(struct device_node *root, void *unused) -- 2.30.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
Port Skov boards to the deep-propbe and reduce boot time by 100msec. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boards/skov-imx6/board.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c index fea840aa33..6cdfc8f24d 100644 --- a/arch/arm/boards/skov-imx6/board.c +++ b/arch/arm/boards/skov-imx6/board.c @@ -2,16 +2,17 @@ #define pr_fmt(fmt) "skov-imx6: " fmt +#include <bootsource.h> #include <common.h> -#include <init.h> -#include <mach/bbu.h> +#include <deep-probe.h> #include <environment.h> -#include <bootsource.h> #include <globalvar.h> -#include <net.h> -#include <of_gpio.h> #include <gpio.h> +#include <init.h> #include <linux/micrel_phy.h> +#include <mach/bbu.h> +#include <net.h> +#include <of_gpio.h> #include "version.h" @@ -499,10 +500,20 @@ static int skov_imx6_fixup(struct device_node *root, void *unused) */ static void skov_init_board(const struct board_description *variant) { + struct device_node *gpio_np = NULL; struct device_node *np; char *environment_path, *envdev; int ret; + gpio_np = of_find_node_by_name(NULL, "gpio@20b4000"); + if (gpio_np) { + ret = of_device_ensure_probed(gpio_np); + if (ret) + pr_warn("Can't probe GPIO node\n"); + } else { + pr_warn("Can't get GPIO node\n"); + } + imx6_bbu_internal_spi_i2c_register_handler("spiflash", "/dev/m25p0.barebox", BBU_HANDLER_FLAG_DEFAULT); @@ -661,6 +672,7 @@ static __maybe_unused struct of_device_id skov_version_ids[] = { /* sentinel */ } }; +BAREBOX_DEEP_PROBE_ENABLE(skov_version_ids); static struct driver_d skov_version_driver = { .name = "skov-imx6", -- 2.30.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
Add eth1-discover script to run USB detection if eth0 is disabled. The eth0 will be automatically disabled if the no on-board switch is detected. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boards/skov-imx6/Makefile | 1 + arch/arm/boards/skov-imx6/board.c | 3 +++ .../skov-imx6/defaultenv-skov-imx6/network/eth1-discover | 8 ++++++++ 3 files changed, 12 insertions(+) create mode 100644 arch/arm/boards/skov-imx6/defaultenv-skov-imx6/network/eth1-discover diff --git a/arch/arm/boards/skov-imx6/Makefile b/arch/arm/boards/skov-imx6/Makefile index a5e85bc1e1..07b87ff11d 100644 --- a/arch/arm/boards/skov-imx6/Makefile +++ b/arch/arm/boards/skov-imx6/Makefile @@ -1,3 +1,4 @@ obj-y += board.o lwl-y += lowlevel.o obj-pbl-y += version.o +bbenv-y += defaultenv-skov-imx6 diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c index 6cdfc8f24d..9c4cf2667f 100644 --- a/arch/arm/boards/skov-imx6/board.c +++ b/arch/arm/boards/skov-imx6/board.c @@ -5,6 +5,7 @@ #include <bootsource.h> #include <common.h> #include <deep-probe.h> +#include <envfs.h> #include <environment.h> #include <globalvar.h> #include <gpio.h> @@ -662,6 +663,8 @@ static int skov_imx6_probe(struct device_d *dev) skov_init_board(variant); + defaultenv_append_directory(defaultenv_skov_imx6); + return 0; } diff --git a/arch/arm/boards/skov-imx6/defaultenv-skov-imx6/network/eth1-discover b/arch/arm/boards/skov-imx6/defaultenv-skov-imx6/network/eth1-discover new file mode 100644 index 0000000000..e11a3f9006 --- /dev/null +++ b/arch/arm/boards/skov-imx6/defaultenv-skov-imx6/network/eth1-discover @@ -0,0 +1,8 @@ +#!/bin/sh + +# Some boards doesn't have a ETH port, but may have USB network attached +if [ "$eth0.mode" != "disabled" ]; then + exit 0; +fi + +usb -- 2.30.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox