mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrej Picej <andrej.picej@norik.com>
To: barebox@lists.infradead.org
Cc: Y.Bas@phytec.de, s.riedmueller@phytec.de
Subject: [PATCH 2/5] ARM: configs: phytec-som-imx6.config
Date: Mon, 15 Nov 2021 14:02:05 +0100	[thread overview]
Message-ID: <20211115130208.619443-3-andrej.picej@norik.com> (raw)
In-Reply-To: <20211115130208.619443-1-andrej.picej@norik.com>

Create PHYTEC specific i.MX6 SoM config fragment, which is intended to
be merged with the default imx_v7_defconfig. This way, one can clearly
outline the differences between standard defconfig and changes PHYTEC
makes for i.MX6 SoMs in their BSP. Nonetheless, at the same time, this
minimizes efforts required to port patches to defconfig with each new
PHYTEC BSP release.

For now:
     - disable BLSPEC,
     - disable IPU driver,
     - enable of_fixup_status command,
     - enable of_overlay command,
     - enable of_display_timings command and
     - enable OCOTP fuse writing ability.

To manually configure PHYTEC i.MX6 board, config merge can be triggered
with:
$ ./scripts/kconfig/merge_config.sh -m arch/arm/config /imx_v7_defconfig
arch/arm/configs/phytec-som-imx6.config && make olddefconfig

Signed-off-by: Andrej Picej <andrej.picej@norik.com>
---
 arch/arm/configs/phytec-som-imx6.config | 10 ++++++++++
 1 file changed, 10 insertions(+)
 create mode 100644 arch/arm/configs/phytec-som-imx6.config

diff --git a/arch/arm/configs/phytec-som-imx6.config b/arch/arm/configs/phytec-som-imx6.config
new file mode 100644
index 000000000..a7d5bae59
--- /dev/null
+++ b/arch/arm/configs/phytec-som-imx6.config
@@ -0,0 +1,10 @@
+# CONFIG_BLSPEC is not set
+CONFIG_CMD_OF_OVERLAY=y
+CONFIG_CMD_OF_DISPLAY_TIMINGS=y
+CONFIG_CMD_OF_FIXUP_STATUS=y
+# CONFIG_DRIVER_VIDEO_IMX_IPUV3 is not set
+# CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS is not set
+# CONFIG_DRIVER_VIDEO_IMX_IPUV3_HDMI is not set
+# CONFIG_DRIVER_VIDEO_SIMPLEFB is not set
+# CONFIG_DRIVER_VIDEO_EDID is not set
+CONFIG_IMX_OCOTP_WRITE=y
-- 
2.25.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  parent reply	other threads:[~2021-11-15 13:04 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-15 13:02 [PATCH 0/5] PHYTEC patches to be mainlined Andrej Picej
2021-11-15 13:02 ` [PATCH 1/5] flash-header-phytec-pcl063: Set SOC voltage to 1.25 V during boot Andrej Picej
2021-11-15 13:02 ` Andrej Picej [this message]
2021-11-17  7:03   ` [PATCH 2/5] ARM: configs: phytec-som-imx6.config Sascha Hauer
2021-11-17  9:59     ` Stefan Riedmüller
2021-11-17 10:08       ` Andrej Picej
2021-11-15 13:02 ` [PATCH 3/5] regulator: allow use of dummy regulator Andrej Picej
2021-11-17  7:21   ` Sascha Hauer
2021-11-17  8:11     ` Andrej Picej
2021-11-17  9:29       ` Andrej Picej
2021-11-15 13:02 ` [PATCH 4/5] ARM: dts: imx6qdl: pfla02: allow use of dummy regulators Andrej Picej
2021-11-15 13:02 ` [PATCH 5/5] documentation: regulator: add dummy-supply Andrej Picej

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211115130208.619443-3-andrej.picej@norik.com \
    --to=andrej.picej@norik.com \
    --cc=Y.Bas@phytec.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.riedmueller@phytec.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox