From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 2/4] video: add driver for STM32 LCD-TFT Display Controller
Date: Mon, 31 Jan 2022 09:03:00 +0100 [thread overview]
Message-ID: <20220131080302.1873443-3-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20220131080302.1873443-1-a.fatoum@pengutronix.de>
This driver has been tested on a STM32F429 connected to an Ilitek 9341
Display for which support is added in a follow-up commit. The same
driver can be used (but wasn't tested in its current form) for the
STM32MP1 as well. The official ST evaluation kits all use MIPI-DSI
for which we still lack support. The LXA MC-1 has a parallel display
connected to the LTDC, but I didn't have one readily available to test.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/video/Kconfig | 8 +
drivers/video/Makefile | 1 +
drivers/video/stm32_ltdc.c | 336 +++++++++++++++++++++++++++++++++++++
drivers/video/stm32_ltdc.h | 130 ++++++++++++++
4 files changed, 475 insertions(+)
create mode 100644 drivers/video/stm32_ltdc.c
create mode 100644 drivers/video/stm32_ltdc.h
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index cfbd541a956e..1b8672fdea82 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -59,6 +59,14 @@ config DRIVER_VIDEO_STM
Say 'Y' here to enable framebuffer and splash screen support for
i.MX23 and i.MX28 based systems.
+config DRIVER_VIDEO_STM32_LTDC
+ bool "STM32 LTDC framebuffer driver"
+ select VIDEO_VPL
+ depends on ARCH_STM32 || COMPILE_TEST
+ help
+ Say 'Y' here to enable framebuffer and splash screen support for
+ STM32 and STM32MP1.
+
config DRIVER_VIDEO_S3C24XX
bool "S3C244x framebuffer driver"
depends on ARCH_S3C24xx
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 8344bdd2af2a..7f4429278987 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_DRIVER_VIDEO_SIMPLE_PANEL) += simple-panel.o
obj-$(CONFIG_DRIVER_VIDEO_ATMEL) += atmel_lcdfb.o atmel_lcdfb_core.o
obj-$(CONFIG_DRIVER_VIDEO_ATMEL_HLCD) += atmel_hlcdfb.o atmel_lcdfb_core.o
obj-$(CONFIG_DRIVER_VIDEO_STM) += stm.o
+obj-$(CONFIG_DRIVER_VIDEO_STM32_LTDC) += stm32_ltdc.o
obj-$(CONFIG_DRIVER_VIDEO_IMX) += imx.o
obj-$(CONFIG_DRIVER_VIDEO_IMX_IPU) += imx-ipu-fb.o
obj-$(CONFIG_DRIVER_VIDEO_S3C24XX) += s3c24xx.o
diff --git a/drivers/video/stm32_ltdc.c b/drivers/video/stm32_ltdc.c
new file mode 100644
index 000000000000..645c20b5545f
--- /dev/null
+++ b/drivers/video/stm32_ltdc.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017-2018 STMicroelectronics - All Rights Reserved
+ * Author(s): Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics.
+ * Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ * Ahmad Fatoum <a.fatoum@pengutronix.de>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <io.h>
+#include <fb.h>
+#include <dma.h>
+#include <video/media-bus-format.h>
+#include <video/vpl.h>
+#include <of_graph.h>
+
+#include "stm32_ltdc.h"
+
+struct ltdc_hw {
+ void __iomem *regs;
+ struct device_d *dev;
+ struct clk *pclk;
+ bool claimed;
+};
+
+struct ltdc_fb {
+ int id;
+ struct fb_info info;
+ u32 bg_col_argb;
+ u32 alpha;
+ u32 bus_format;
+ enum stm32_ltdc_pixfmt pixfmt;
+ struct vpl vpl;
+ struct ltdc_hw *hw;
+};
+
+static bool has_alpha(enum stm32_ltdc_pixfmt pixfmt)
+{
+ switch (pixfmt) {
+ case PF_ARGB8888:
+ case PF_ARGB1555:
+ case PF_ARGB4444:
+ case PF_AL44:
+ case PF_AL88:
+ return true;
+ case PF_RGB888:
+ case PF_RGB565:
+ case PF_L8:
+ default:
+ return false;
+ }
+}
+
+static void ltdc_set_mode(struct ltdc_fb *priv,
+ struct fb_videomode *mode)
+{
+ void __iomem *regs = priv->hw->regs;
+ u32 hsync, vsync, acc_hbp, acc_vbp, acc_act_w, acc_act_h;
+ u32 total_w, total_h;
+ u32 val;
+
+ /* Convert video timings to ltdc timings */
+ hsync = mode->hsync_len - 1;
+ vsync = mode->vsync_len - 1;
+ acc_hbp = hsync + mode->left_margin;
+ acc_vbp = vsync + mode->upper_margin;
+ acc_act_w = acc_hbp + mode->xres;
+ acc_act_h = acc_vbp + mode->yres;
+ total_w = acc_act_w + mode->right_margin;
+ total_h = acc_act_h + mode->lower_margin;
+
+ /* Synchronization sizes */
+ val = (hsync << 16) | vsync;
+ clrsetbits_le32(regs + LTDC_SSCR, SSCR_VSH | SSCR_HSW, val);
+
+ /* Accumulated back porch */
+ val = (acc_hbp << 16) | acc_vbp;
+ clrsetbits_le32(regs + LTDC_BPCR, BPCR_AVBP | BPCR_AHBP, val);
+
+ /* Accumulated active width */
+ val = (acc_act_w << 16) | acc_act_h;
+ clrsetbits_le32(regs + LTDC_AWCR, AWCR_AAW | AWCR_AAH, val);
+
+ /* Total width & height */
+ val = (total_w << 16) | total_h;
+ clrsetbits_le32(regs + LTDC_TWCR, TWCR_TOTALH | TWCR_TOTALW, val);
+
+ setbits_le32(regs + LTDC_LIPCR, acc_act_h + 1);
+
+ /* Signal polarities */
+ val = 0;
+ dev_dbg(priv->hw->dev, "mode->display_flags 0x%x mode->sync 0x%x\n",
+ mode->display_flags, mode->sync);
+ if (mode->sync & FB_SYNC_HOR_HIGH_ACT)
+ val |= GCR_HSPOL;
+ if (mode->sync & FB_SYNC_VERT_HIGH_ACT)
+ val |= GCR_VSPOL;
+ if (mode->display_flags & DISPLAY_FLAGS_DE_HIGH)
+ val |= GCR_DEPOL;
+ if (mode->display_flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+ val |= GCR_PCPOL;
+
+ clrsetbits_le32(regs + LTDC_GCR,
+ GCR_HSPOL | GCR_VSPOL | GCR_DEPOL | GCR_PCPOL, val);
+
+ /* Overall background color */
+ writel(priv->bg_col_argb, regs + LTDC_BCCR);
+}
+
+static void ltdc_set_layer1(struct ltdc_fb *priv)
+{
+ void __iomem *regs = priv->hw->regs;
+ u32 x0, x1, y0, y1;
+ u32 pitch_in_bytes;
+ u32 line_length;
+ u32 bus_width;
+ u32 val, tmp, bpp;
+ struct fb_videomode *mode = priv->info.mode;
+
+ x0 = y0 = 0;
+ x1 = mode->xres - 1;
+ y1 = mode->yres - 1;
+
+ /* Horizontal start and stop position */
+ tmp = (readl(regs + LTDC_BPCR) & BPCR_AHBP) >> 16;
+ val = ((x1 + 1 + tmp) << 16) + (x0 + 1 + tmp);
+ clrsetbits_le32(regs + LTDC_L1WHPCR, LXWHPCR_WHSTPOS | LXWHPCR_WHSPPOS,
+ val);
+
+ /* Vertical start & stop position */
+ tmp = readl(regs + LTDC_BPCR) & BPCR_AVBP;
+ val = ((y1 + 1 + tmp) << 16) + (y0 + 1 + tmp);
+ clrsetbits_le32(regs + LTDC_L1WVPCR, LXWVPCR_WVSTPOS | LXWVPCR_WVSPPOS,
+ val);
+
+ /* Layer background color */
+ writel(priv->bg_col_argb, regs + LTDC_L1DCCR);
+
+ /* Color frame buffer pitch in bytes & line length */
+ bpp = priv->info.bits_per_pixel;
+ pitch_in_bytes = mode->xres * (bpp >> 3);
+ bus_width = 8 << ((readl(regs + LTDC_GC2R) & GC2R_BW) >> 4);
+ line_length = ((bpp >> 3) * mode->xres) + (bus_width >> 3) - 1;
+ val = (pitch_in_bytes << 16) | line_length;
+ clrsetbits_le32(regs + LTDC_L1CFBLR, LXCFBLR_CFBLL | LXCFBLR_CFBP, val);
+
+ /* Pixel format */
+ clrsetbits_le32(regs + LTDC_L1PFCR, LXPFCR_PF, priv->pixfmt);
+
+ /* Constant alpha value */
+ clrsetbits_le32(regs + LTDC_L1CACR, LXCACR_CONSTA, priv->alpha);
+
+ /* Specifies the blending factors : with or without pixel alpha */
+ /* Manage hw-specific capabilities */
+ val = has_alpha(priv->pixfmt) ? BF1_PAXCA | BF2_1PAXCA : BF1_CA | BF2_1CA;
+
+ /* Blending factors */
+ clrsetbits_le32(regs + LTDC_L1BFCR, LXBFCR_BF2 | LXBFCR_BF1, val);
+
+ /* Frame buffer line number */
+ clrsetbits_le32(regs + LTDC_L1CFBLNR, LXCFBLNR_CFBLN, mode->yres);
+
+ /* Frame buffer address */
+ writel((unsigned long)priv->info.screen_base, regs + LTDC_L1CFBAR);
+
+ /* Enable layer 1 */
+ setbits_le32(regs + LTDC_L1CR, LXCR_LEN);
+}
+
+static int ltdc_activate_var(struct fb_info *info)
+{
+ info->line_length = info->xres * (info->bits_per_pixel >> 3);
+
+ info->screen_base = dma_alloc_writecombine(info->line_length * info->yres,
+ DMA_ADDRESS_BROKEN);
+ if (!info->screen_base)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void ltdc_enable(struct fb_info *info)
+{
+ struct fb_videomode *mode = info->mode;
+ struct ltdc_fb *priv = info->priv;
+ struct ltdc_hw *hw = priv->hw;
+ u32 pixclock;
+ int ret;
+
+ if (hw->claimed) {
+ dev_warn(hw->dev, "CRTC currently claimed by other frame buffer!\n");
+ return;
+ }
+
+ vpl_ioctl_prepare(&priv->vpl, priv->id, mode);
+
+ pixclock = PICOS2KHZ(mode->pixclock) * 1000;
+
+ ret = clk_enable(hw->pclk);
+ if (ret) {
+ dev_err(hw->dev, "peripheral clock enable error %d\n", ret);
+ return;
+ }
+
+ clk_set_rate(clk_get_parent(hw->pclk), pixclock);
+ if (!ret)
+ ret = clk_set_rate(hw->pclk, pixclock);
+ if (ret < 0) {
+ dev_err(hw->dev, "fail to set pixel clock %d hz: %d\n",
+ pixclock, ret);
+ return;
+ }
+
+ ret = device_reset_us(hw->dev, 100000);
+ if (ret) {
+ dev_err(hw->dev, "error resetting controller %d\n", ret);
+ return;
+ }
+
+ /* Configure & start LTDC */
+ ltdc_set_mode(priv, mode);
+ ltdc_set_layer1(priv);
+
+ /* Reload configuration immediately & enable LTDC */
+ setbits_le32(hw->regs + LTDC_SRCR, SRCR_IMR);
+ setbits_le32(hw->regs + LTDC_GCR, GCR_LTDCEN);
+
+ vpl_ioctl_enable(&priv->vpl, priv->id);
+
+ hw->claimed = true;
+}
+
+static void ltdc_disable(struct fb_info *info)
+{
+ struct ltdc_fb *priv = info->priv;
+
+ vpl_ioctl_disable(&priv->vpl, priv->id);
+
+ clrbits_le32(priv->hw->regs + LTDC_GCR, GCR_LTDCEN);
+ clk_disable(priv->hw->pclk);
+ priv->hw->claimed = false;
+
+ vpl_ioctl_unprepare(&priv->vpl, priv->id);
+}
+
+static struct fb_ops ltdc_ops = {
+ .fb_activate_var = ltdc_activate_var,
+ .fb_enable = ltdc_enable,
+ .fb_disable = ltdc_disable,
+};
+
+static int ltdc_probe(struct device_d *dev)
+{
+ struct device_node *np;
+ struct resource *iores;
+ struct ltdc_hw *hw;
+ int ret;
+
+ iores = dev_request_mem_resource(dev, 0);
+ if (IS_ERR(iores))
+ return PTR_ERR(iores);
+
+ hw = xzalloc(sizeof *hw);
+ hw->dev = dev;
+ hw->regs = IOMEM(iores->start);
+
+ hw->pclk = clk_get(dev, NULL);
+ if (IS_ERR(hw->pclk)) {
+ dev_err(dev, "peripheral clock get error %d\n", ret);
+ return PTR_ERR(hw->pclk);
+ }
+
+ for_each_available_child_of_node(dev->device_node, np) {
+ struct ltdc_fb *priv;
+ struct of_endpoint ep;
+ struct fb_info *info;
+
+ if (!of_graph_port_is_available(np))
+ continue;
+
+ ret = of_graph_parse_endpoint(np, &ep);
+ if (ret)
+ return ret;
+
+ dev_dbg(hw->dev, "register vpl for %s\n", np->full_name);
+
+ priv = xzalloc(sizeof(*priv));
+ priv->hw = hw;
+ priv->id = ep.id;
+ priv->vpl.node = dev->device_node;
+
+ ret = vpl_register(&priv->vpl);
+ if (ret)
+ return ret;
+
+ info = &priv->info;
+ info->priv = priv;
+ info->fbops = <dc_ops;
+
+ info->red = (struct fb_bitfield){ .offset = 11, .length = 5, };
+ info->green = (struct fb_bitfield){ .offset = 5, .length = 6, };
+ info->blue = (struct fb_bitfield){ .offset = 0, .length = 5, };
+ info->bits_per_pixel = 16,
+ priv->pixfmt = PF_RGB565;
+ /* TODO Below parameters are hard-coded for the moment... */
+ priv->bg_col_argb = 0xFFFFFFFF; /* white no transparency */
+ priv->alpha = 0xFF;
+
+ ret = vpl_ioctl(&priv->vpl, priv->id, VPL_GET_VIDEOMODES, &info->modes);
+ if (ret)
+ dev_dbg(dev, "failed to get modes: %s\n", strerror(-ret));
+
+ ret = register_framebuffer(info);
+ if (ret < 0) {
+ dev_err(dev, "failed to register framebuffer\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id ltdc_ids[] = {
+ { .compatible = "st,stm32-ltdc" },
+ { /* sentinel */ }
+};
+
+static struct driver_d ltdc_driver = {
+ .name = "stm32-ltdc",
+ .probe = ltdc_probe,
+ .of_compatible = DRV_OF_COMPAT(ltdc_ids),
+};
+device_platform_driver(ltdc_driver);
diff --git a/drivers/video/stm32_ltdc.h b/drivers/video/stm32_ltdc.h
new file mode 100644
index 000000000000..6481f2613b95
--- /dev/null
+++ b/drivers/video/stm32_ltdc.h
@@ -0,0 +1,130 @@
+#ifndef STM32_LTDC_H__
+#define STM32_LTDC_H__
+
+/* LTDC main registers */
+#define LTDC_IDR 0x00 /* IDentification */
+#define LTDC_LCR 0x04 /* Layer Count */
+#define LTDC_SSCR 0x08 /* Synchronization Size Configuration */
+#define LTDC_BPCR 0x0C /* Back Porch Configuration */
+#define LTDC_AWCR 0x10 /* Active Width Configuration */
+#define LTDC_TWCR 0x14 /* Total Width Configuration */
+#define LTDC_GCR 0x18 /* Global Control */
+#define LTDC_GC1R 0x1C /* Global Configuration 1 */
+#define LTDC_GC2R 0x20 /* Global Configuration 2 */
+#define LTDC_SRCR 0x24 /* Shadow Reload Configuration */
+#define LTDC_GACR 0x28 /* GAmma Correction */
+#define LTDC_BCCR 0x2C /* Background Color Configuration */
+#define LTDC_IER 0x34 /* Interrupt Enable */
+#define LTDC_ISR 0x38 /* Interrupt Status */
+#define LTDC_ICR 0x3C /* Interrupt Clear */
+#define LTDC_LIPCR 0x40 /* Line Interrupt Position Conf. */
+#define LTDC_CPSR 0x44 /* Current Position Status */
+#define LTDC_CDSR 0x48 /* Current Display Status */
+
+/* LTDC layer 1 registers */
+#define LTDC_L1LC1R 0x80 /* L1 Layer Configuration 1 */
+#define LTDC_L1LC2R 0x84 /* L1 Layer Configuration 2 */
+#define LTDC_L1CR 0x84 /* L1 Control */
+#define LTDC_L1WHPCR 0x88 /* L1 Window Hor Position Config */
+#define LTDC_L1WVPCR 0x8C /* L1 Window Vert Position Config */
+#define LTDC_L1CKCR 0x90 /* L1 Color Keying Configuration */
+#define LTDC_L1PFCR 0x94 /* L1 Pixel Format Configuration */
+#define LTDC_L1CACR 0x98 /* L1 Constant Alpha Config */
+#define LTDC_L1DCCR 0x9C /* L1 Default Color Configuration */
+#define LTDC_L1BFCR 0xA0 /* L1 Blend Factors Configuration */
+#define LTDC_L1FBBCR 0xA4 /* L1 FrameBuffer Bus Control */
+#define LTDC_L1AFBCR 0xA8 /* L1 AuxFB Control */
+#define LTDC_L1CFBAR 0xAC /* L1 Color FrameBuffer Address */
+#define LTDC_L1CFBLR 0xB0 /* L1 Color FrameBuffer Length */
+#define LTDC_L1CFBLNR 0xB4 /* L1 Color FrameBuffer Line Nb */
+#define LTDC_L1AFBAR 0xB8 /* L1 AuxFB Address */
+#define LTDC_L1AFBLR 0xBC /* L1 AuxFB Length */
+#define LTDC_L1AFBLNR 0xC0 /* L1 AuxFB Line Number */
+#define LTDC_L1CLUTWR 0xC4 /* L1 CLUT Write */
+
+/* Bit definitions */
+#define SSCR_VSH GENMASK(10, 0) /* Vertical Synchronization Height */
+#define SSCR_HSW GENMASK(27, 16) /* Horizontal Synchronization Width */
+
+#define BPCR_AVBP GENMASK(10, 0) /* Accumulated Vertical Back Porch */
+#define BPCR_AHBP GENMASK(27, 16) /* Accumulated Horizontal Back Porch */
+
+#define AWCR_AAH GENMASK(10, 0) /* Accumulated Active Height */
+#define AWCR_AAW GENMASK(27, 16) /* Accumulated Active Width */
+
+#define TWCR_TOTALH GENMASK(10, 0) /* TOTAL Height */
+#define TWCR_TOTALW GENMASK(27, 16) /* TOTAL Width */
+
+#define GCR_LTDCEN BIT(0) /* LTDC ENable */
+#define GCR_DEN BIT(16) /* Dither ENable */
+#define GCR_PCPOL BIT(28) /* Pixel Clock POLarity-Inverted */
+#define GCR_DEPOL BIT(29) /* Data Enable POLarity-High */
+#define GCR_VSPOL BIT(30) /* Vertical Synchro POLarity-High */
+#define GCR_HSPOL BIT(31) /* Horizontal Synchro POLarity-High */
+
+#define GC1R_WBCH GENMASK(3, 0) /* Width of Blue CHannel output */
+#define GC1R_WGCH GENMASK(7, 4) /* Width of Green Channel output */
+#define GC1R_WRCH GENMASK(11, 8) /* Width of Red Channel output */
+#define GC1R_PBEN BIT(12) /* Precise Blending ENable */
+#define GC1R_DT GENMASK(15, 14) /* Dithering Technique */
+#define GC1R_GCT GENMASK(19, 17) /* Gamma Correction Technique */
+#define GC1R_SHREN BIT(21) /* SHadow Registers ENabled */
+#define GC1R_BCP BIT(22) /* Background Colour Programmable */
+#define GC1R_BBEN BIT(23) /* Background Blending ENabled */
+#define GC1R_LNIP BIT(24) /* Line Number IRQ Position */
+#define GC1R_TP BIT(25) /* Timing Programmable */
+#define GC1R_IPP BIT(26) /* IRQ Polarity Programmable */
+#define GC1R_SPP BIT(27) /* Sync Polarity Programmable */
+#define GC1R_DWP BIT(28) /* Dither Width Programmable */
+#define GC1R_STREN BIT(29) /* STatus Registers ENabled */
+#define GC1R_BMEN BIT(31) /* Blind Mode ENabled */
+
+#define GC2R_EDCA BIT(0) /* External Display Control Ability */
+#define GC2R_STSAEN BIT(1) /* Slave Timing Sync Ability ENabled */
+#define GC2R_DVAEN BIT(2) /* Dual-View Ability ENabled */
+#define GC2R_DPAEN BIT(3) /* Dual-Port Ability ENabled */
+#define GC2R_BW GENMASK(6, 4) /* Bus Width (log2 of nb of bytes) */
+#define GC2R_EDCEN BIT(7) /* External Display Control ENabled */
+
+#define SRCR_IMR BIT(0) /* IMmediate Reload */
+#define SRCR_VBR BIT(1) /* Vertical Blanking Reload */
+
+#define LXCR_LEN BIT(0) /* Layer ENable */
+#define LXCR_COLKEN BIT(1) /* Color Keying Enable */
+#define LXCR_CLUTEN BIT(4) /* Color Look-Up Table ENable */
+
+#define LXWHPCR_WHSTPOS GENMASK(11, 0) /* Window Horizontal StarT POSition */
+#define LXWHPCR_WHSPPOS GENMASK(27, 16) /* Window Horizontal StoP POSition */
+
+#define LXWVPCR_WVSTPOS GENMASK(10, 0) /* Window Vertical StarT POSition */
+#define LXWVPCR_WVSPPOS GENMASK(26, 16) /* Window Vertical StoP POSition */
+
+#define LXPFCR_PF GENMASK(2, 0) /* Pixel Format */
+
+#define LXCACR_CONSTA GENMASK(7, 0) /* CONSTant Alpha */
+
+#define LXBFCR_BF2 GENMASK(2, 0) /* Blending Factor 2 */
+#define LXBFCR_BF1 GENMASK(10, 8) /* Blending Factor 1 */
+
+#define LXCFBLR_CFBLL GENMASK(12, 0) /* Color Frame Buffer Line Length */
+#define LXCFBLR_CFBP GENMASK(28, 16) /* Color Frame Buffer Pitch in bytes */
+
+#define LXCFBLNR_CFBLN GENMASK(10, 0) /* Color Frame Buffer Line Number */
+
+#define BF1_PAXCA 0x600 /* Pixel Alpha x Constant Alpha */
+#define BF1_CA 0x400 /* Constant Alpha */
+#define BF2_1PAXCA 0x007 /* 1 - (Pixel Alpha x Constant Alpha) */
+#define BF2_1CA 0x005 /* 1 - Constant Alpha */
+
+enum stm32_ltdc_pixfmt {
+ PF_ARGB8888 = 0,
+ PF_RGB888,
+ PF_RGB565,
+ PF_ARGB1555,
+ PF_ARGB4444,
+ PF_L8,
+ PF_AL44,
+ PF_AL88
+};
+
+#endif
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2022-01-31 8:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-31 8:02 [PATCH 0/4] video: add STM32F429-DISCO video pipeline support Ahmad Fatoum
2022-01-31 8:02 ` [PATCH 1/4] gpiolib: implement gpiod_set_value Ahmad Fatoum
2022-01-31 8:03 ` Ahmad Fatoum [this message]
2022-01-31 8:03 ` [PATCH 3/4] video: add MIPI DBI Type C Option 3 support Ahmad Fatoum
2022-01-31 10:21 ` Sascha Hauer
2022-01-31 10:28 ` Ahmad Fatoum
2022-01-31 8:03 ` [PATCH 4/4] video: add Ilitek ILI9341 panel support Ahmad Fatoum
2022-02-02 9:55 [PATCH 0/4] video: add STM32F429-DISCO video pipeline support Ahmad Fatoum
2022-02-02 9:55 ` [PATCH 2/4] video: add driver for STM32 LCD-TFT Display Controller Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220131080302.1873443-3-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox