From: Sascha Hauer <sha@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org,
Christian Melki <christian.melki@t2data.com>
Subject: Re: [PATCH 1/2] ARM: i.MX: factor out AIPS configuration into helper function
Date: Fri, 4 Mar 2022 15:29:03 +0100 [thread overview]
Message-ID: <20220304142903.GA405@pengutronix.de> (raw)
In-Reply-To: <20220303144246.3603311-1-a.fatoum@pengutronix.de>
On Thu, Mar 03, 2022 at 03:42:45PM +0100, Ahmad Fatoum wrote:
> We have the exact same sequence twice for each AIPS and i.MX6ULL/SX add
> another AIPS, so it's time to factor this out into a dedicated helper
> function and comment it a bit more.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> arch/arm/mach-imx/imx6.c | 44 +++++++++++++++++++++-------------------
> 1 file changed, 23 insertions(+), 21 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/mach-imx/imx6.c b/arch/arm/mach-imx/imx6.c
> index 3ee42fd966dd..256288b25a88 100644
> --- a/arch/arm/mach-imx/imx6.c
> +++ b/arch/arm/mach-imx/imx6.c
> @@ -31,10 +31,29 @@
> #define MX6_OCOTP_CFG0 0x410
> #define MX6_OCOTP_CFG1 0x420
>
> +static void imx6_configure_aips(void __iomem *aips)
> +{
> + /*
> + * Set all MPROTx to be non-bufferable, trusted for R/W,
> + * not forced to user-mode.
> + */
> + writel(0x77777777, aips);
> + writel(0x77777777, aips + 0x4);
> +
> + /*
> + * Set all OPACRx to be non-bufferable, not require
> + * supervisor privilege level for access,allow for
> + * write access and untrusted master access.
> + */
> + writel(0, aips + 0x40);
> + writel(0, aips + 0x44);
> + writel(0, aips + 0x48);
> + writel(0, aips + 0x4c);
> + writel(0, aips + 0x50);
> +}
> +
> static void imx6_init_lowlevel(void)
> {
> - void __iomem *aips1 = (void *)MX6_AIPS1_ON_BASE_ADDR;
> - void __iomem *aips2 = (void *)MX6_AIPS2_ON_BASE_ADDR;
> bool is_imx6q = __imx6_cpu_type() == IMX6_CPUTYPE_IMX6Q;
> bool is_imx6d = __imx6_cpu_type() == IMX6_CPUTYPE_IMX6D;
> uint32_t val_480;
> @@ -51,25 +70,8 @@ static void imx6_init_lowlevel(void)
> if ((readl(MXC_CCM_CCGR6) & 0x3))
> imx_reset_otg_controller(IOMEM(MX6_OTG_BASE_ADDR));
>
> - /*
> - * Set all MPROTx to be non-bufferable, trusted for R/W,
> - * not forced to user-mode.
> - */
> - writel(0x77777777, aips1);
> - writel(0x77777777, aips1 + 0x4);
> - writel(0, aips1 + 0x40);
> - writel(0, aips1 + 0x44);
> - writel(0, aips1 + 0x48);
> - writel(0, aips1 + 0x4c);
> - writel(0, aips1 + 0x50);
> -
> - writel(0x77777777, aips2);
> - writel(0x77777777, aips2 + 0x4);
> - writel(0, aips2 + 0x40);
> - writel(0, aips2 + 0x44);
> - writel(0, aips2 + 0x48);
> - writel(0, aips2 + 0x4c);
> - writel(0, aips2 + 0x50);
> + imx6_configure_aips(IOMEM(MX6_AIPS1_ON_BASE_ADDR));
> + imx6_configure_aips(IOMEM(MX6_AIPS2_ON_BASE_ADDR));
>
> /* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
> * to make sure PFD is working right, otherwise, PFDs may
> --
> 2.30.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2022-03-04 14:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-03 14:42 Ahmad Fatoum
2022-03-03 14:42 ` [PATCH RFT 2/2] ARM: i.MX6: configure AIPS3 for i.MX6ULL/i.MX6SX Ahmad Fatoum
2022-03-04 14:29 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220304142903.GA405@pengutronix.de \
--to=sha@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=christian.melki@t2data.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox