From: Steffen Trumtrar <str@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Subject: [PATCH 2/2] net: phy: mv88e6xxx: add support for mv88e6250
Date: Mon, 21 Mar 2022 14:16:32 +0100 [thread overview]
Message-ID: <20220321131632.1307943-2-str@pengutronix.de> (raw)
In-Reply-To: <20220321131632.1307943-1-str@pengutronix.de>
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
barebox port of the linux patch:
commit 1f71836f5d96e4c87fad16db86d324bee47e1d30
Author: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Date: Tue Jun 4 07:34:32 2019 +0000
net: dsa: mv88e6xxx: add support for mv88e6250
This adds support for the Marvell 88E6250. I've checked that each
member in the ops-structure makes sense, and basic switchdev
functionality works fine.
It uses the new dual_chip option, and since its port registers start
at SMI address 0x08 or 0x18 (i.e., always sw_addr + 0x08), we need to
introduce a new compatible string in order for the auto-identification
in mv88e6xxx_detect() to work.
The chip has four per port 16-bits statistics registers, two of which
correspond to the existing "sw_in_filtered" and "sw_out_filtered" (but
at offsets 0x13 and 0x10 rather than 0x12 and 0x13, because why should
this be easy...). Wiring up those four statistics seems to require
introducing a STATS_TYPE_PORT_6250 bit or similar, which seems a tad
ugly, so for now this just allows access to the STATS_TYPE_BANK0 ones.
The chip does have ptp support, and the existing
mv88e6352_{gpio,avb,ptp}_ops at first glance seem like they would work
out-of-the-box, but for simplicity (and lack of testing) I'm eliding
this.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/net/phy/mv88e6xxx/chip.c | 28 ++++++++++++++++++++++++++++
drivers/net/phy/mv88e6xxx/chip.h | 1 +
drivers/net/phy/mv88e6xxx/port.h | 1 +
3 files changed, 30 insertions(+)
diff --git a/drivers/net/phy/mv88e6xxx/chip.c b/drivers/net/phy/mv88e6xxx/chip.c
index ae59d134e7..a7d707095b 100644
--- a/drivers/net/phy/mv88e6xxx/chip.c
+++ b/drivers/net/phy/mv88e6xxx/chip.c
@@ -36,6 +36,7 @@ enum mv88e6xxx_model {
MV88E6190X,
MV88E6191,
MV88E6240,
+ MV88E6250,
MV88E6290,
MV88E6320,
MV88E6321,
@@ -224,6 +225,18 @@ static const struct mv88e6xxx_ops mv88e6240_ops = {
.port_link_state = mv88e6352_port_link_state,
};
+static const struct mv88e6xxx_ops mv88e6250_ops = {
+ /* MV88E6XXX_FAMILY_6250 */
+ .get_eeprom = mv88e6xxx_g2_get_eeprom16,
+ .set_eeprom = mv88e6xxx_g2_set_eeprom16,
+ .phy_read = mv88e6xxx_g2_smi_phy_read,
+ .phy_write = mv88e6xxx_g2_smi_phy_write,
+ .port_set_link = mv88e6xxx_port_set_link,
+ .port_set_duplex = mv88e6xxx_port_set_duplex,
+ .port_set_rgmii_delay = mv88e6352_port_set_rgmii_delay,
+ .port_set_speed = mv88e6250_port_set_speed,
+};
+
static const struct mv88e6xxx_ops mv88e6290_ops = {
/* MV88E6XXX_FAMILY_6390 */
.get_eeprom = mv88e6xxx_g2_get_eeprom8,
@@ -525,6 +538,17 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.ops = &mv88e6240_ops,
},
+ [MV88E6250] = {
+ .prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6250,
+ .family = MV88E6XXX_FAMILY_6250,
+ .name = "Marvell 88E6250",
+ .num_ports = 7,
+ .port_base_addr = 0x08,
+ .global1_addr = 0xf,
+ .global2_addr = 0x7,
+ .ops = &mv88e6250_ops,
+ },
+
[MV88E6290] = {
.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6290,
.family = MV88E6XXX_FAMILY_6390,
@@ -931,6 +955,10 @@ static const struct of_device_id mv88e6xxx_of_match[] = {
.compatible = "marvell,mv88e6085",
.data = &mv88e6xxx_table[MV88E6085],
},
+ {
+ .compatible = "marvell,mv88e6250",
+ .data = &mv88e6xxx_table[MV88E6250],
+ },
{
.compatible = "marvell,mv88e6190",
.data = &mv88e6xxx_table[MV88E6190],
diff --git a/drivers/net/phy/mv88e6xxx/chip.h b/drivers/net/phy/mv88e6xxx/chip.h
index 12037ca95c..30fdac9a9f 100644
--- a/drivers/net/phy/mv88e6xxx/chip.h
+++ b/drivers/net/phy/mv88e6xxx/chip.h
@@ -19,6 +19,7 @@ enum mv88e6xxx_family {
MV88E6XXX_FAMILY_6165, /* 6123 6161 6165 */
MV88E6XXX_FAMILY_6185, /* 6108 6121 6122 6131 6152 6155 6182 6185 */
MV88E6XXX_FAMILY_6320, /* 6320 6321 */
+ MV88E6XXX_FAMILY_6250, /* 6250 */
MV88E6XXX_FAMILY_6341, /* 6141 6341 */
MV88E6XXX_FAMILY_6351, /* 6171 6175 6350 6351 */
MV88E6XXX_FAMILY_6352, /* 6172 6176 6240 6352 */
diff --git a/drivers/net/phy/mv88e6xxx/port.h b/drivers/net/phy/mv88e6xxx/port.h
index f5cf72932a..4bc5072948 100644
--- a/drivers/net/phy/mv88e6xxx/port.h
+++ b/drivers/net/phy/mv88e6xxx/port.h
@@ -90,6 +90,7 @@
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6191 0x1910
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6185 0x1a70
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6240 0x2400
+#define MV88E6XXX_PORT_SWITCH_ID_PROD_6250 0x2500
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6290 0x2900
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6321 0x3100
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6141 0x3400
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2022-03-21 13:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-21 13:16 [PATCH 1/2] net: phy: mv88e6xxx: implement port_set_speed " Steffen Trumtrar
2022-03-21 13:16 ` Steffen Trumtrar [this message]
2022-03-28 8:29 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220321131632.1307943-2-str@pengutronix.de \
--to=str@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.trumtrar@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox