From: Sascha Hauer <sha@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v4 13/13] add ethlog command
Date: Tue, 12 Apr 2022 10:54:48 +0200 [thread overview]
Message-ID: <20220412085448.GZ4012@pengutronix.de> (raw)
In-Reply-To: <20220408082950.824927-14-o.rempel@pengutronix.de>
On Fri, Apr 08, 2022 at 10:29:50AM +0200, Oleksij Rempel wrote:
> It is kind of tcpdump or tshark for barebox. Instead of starting
> application it will let barebox dump everything to the console by still
> allowing to use other application.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> commands/Kconfig | 8 +++++
> commands/Makefile | 1 +
> commands/ethlog.c | 83 +++++++++++++++++++++++++++++++++++++++++++++++
> include/net.h | 11 +++++++
> net/eth.c | 4 +--
> net/net.c | 3 ++
> 6 files changed, 108 insertions(+), 2 deletions(-)
> create mode 100644 commands/ethlog.c
>
> diff --git a/commands/Kconfig b/commands/Kconfig
> index caef1e8fb5..c5505321cf 100644
> --- a/commands/Kconfig
> +++ b/commands/Kconfig
> @@ -1272,6 +1272,14 @@ config CMD_IP_ROUTE_GET
> be shown on the command line or alternatively a variable is set to
> the result.
>
> +config CMD_ETHLOG
> + tristate
> + prompt "ethlog"
> + help
> + log ethernet traffic.
> +
> + Usage: ethlog [-r] [DEVICENAME]
> +
> # end Network commands
> endmenu
>
> diff --git a/commands/Makefile b/commands/Makefile
> index fffb6d979e..b3b7bafe6b 100644
> --- a/commands/Makefile
> +++ b/commands/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_CMD_MEMCMP) += memcmp.o
> obj-$(CONFIG_CMD_MEMCPY) += memcpy.o
> obj-$(CONFIG_CMD_MEMSET) += memset.o
> obj-$(CONFIG_CMD_EDIT) += edit.o
> +obj-$(CONFIG_CMD_ETHLOG) += ethlog.o
> obj-$(CONFIG_CMD_EXEC) += exec.o
> obj-$(CONFIG_CMD_SLEEP) += sleep.o
> obj-$(CONFIG_CMD_SMC) += smc.o
> diff --git a/commands/ethlog.c b/commands/ethlog.c
> new file mode 100644
> index 0000000000..5ae278fc87
> --- /dev/null
> +++ b/commands/ethlog.c
> @@ -0,0 +1,83 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// SPDX-FileCopyrightText: (c) 2022 Pengutronix,
> +// Oleksij Rempel <o.rempel@pengutronix.de>
> +
> +#include <common.h>
> +#include <command.h>
> +#include <complete.h>
> +#include <environment.h>
> +#include <getopt.h>
> +#include <net.h>
> +
> +static void ethlog_rx_monitor(struct eth_device *edev, void *packet,
> + int length)
> +{
> + print_hex_dump(KERN_DEBUG, "rx data <: ", DUMP_PREFIX_OFFSET,
> + 16, 1, packet, length, true);
> +}
> +
> +static void ethlog_tx_monitor(struct eth_device *edev, void *packet,
> + int length)
> +{
> + print_hex_dump(KERN_DEBUG, "tx data >: ", DUMP_PREFIX_OFFSET,
> + 16, 1, packet, length, true);
> +}
It would be nice to print the network device name along with the hex
dump. Maybe it's time for a dev_print_hex_dump()
> +
> +static int do_ethlog(int argc, char *argv[])
> +{
> + struct eth_device *edev;
> + const char *edevname;
> + bool remove = false;
> + int opt;
> +
> + while ((opt = getopt(argc, argv, "r")) > 0) {
> + switch (opt) {
> + case 'r':
> + remove = true;
> + break;
> + default:
> + return COMMAND_ERROR_USAGE;
> + }
> + }
> +
> + if (optind == argc)
> + edevname = "eth0";
> + else
> + edevname = argv[optind];
> +
> + edev = eth_get_byname(edevname);
> + if (!edev) {
> + printf("No such network device: %s\n", edevname);
> + return 1;
> + }
> +
> + if (remove) {
> + edev->tx_monitor = NULL;
> + edev->rx_monitor = NULL;
> +
> + return 0;
> + }
> +
> + if (edev->tx_monitor || edev->rx_monitor) {
> + printf("TX/RX monitor is already registered on %s\n", edevname);
> + return 1;
> + }
This check doesn't look useful at the moment.
> +
> + edev->tx_monitor = ethlog_tx_monitor;
> + edev->rx_monitor = ethlog_rx_monitor;
> +
> + return 0;
> +}
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2022-04-12 8:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-08 8:29 [PATCH v4 00/13] provide DSA support Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 01/13] net: add RX preprocessor support Oleksij Rempel
2022-04-12 7:58 ` Sascha Hauer
2022-04-12 8:14 ` Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 02/13] net: add of_find_eth_device_by_node() function Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 03/13] net: phy: export of_phy_register_fixed_link() function Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 04/13] net: add DSA framework to support basic switch functionality Oleksij Rempel
2022-04-12 8:02 ` Sascha Hauer
2022-04-08 8:29 ` [PATCH v4 05/13] driver: add dev_get_priv() helper Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 06/13] net: port part of if_vlan header from kernel v5.17 Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 07/13] spi: port spi_sync_transfer() function " Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 08/13] net: mdio: add MDIO_DEVAD_NONE define Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 09/13] net: phy: make sure MDIO bus is probed if we search for the PHY Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 10/13] of_net: add rev-rmii support Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 11/13] net: dsa: add support for SJA11xx switches Oleksij Rempel
2022-04-12 8:25 ` Sascha Hauer
2022-04-08 8:29 ` [PATCH v4 12/13] net: dsa: add KSZ9477 switch SPI driver Oleksij Rempel
2022-04-12 8:37 ` Sascha Hauer
2022-04-08 8:29 ` [PATCH v4 13/13] add ethlog command Oleksij Rempel
2022-04-12 8:54 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220412085448.GZ4012@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox