From: Sascha Hauer <sha@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v5 00/14] provide DSA support
Date: Thu, 14 Apr 2022 09:42:34 +0200 [thread overview]
Message-ID: <20220414074234.GG4012@pengutronix.de> (raw)
In-Reply-To: <20220413082205.429509-1-o.rempel@pengutronix.de>
On Wed, Apr 13, 2022 at 10:21:51AM +0200, Oleksij Rempel wrote:
> changes v5:
> - add dev_print_hex_dump() support
> - drop rx_preprocessored packed on error
> - dsa: drop of_device_ensure_probed
> - dsa: rework Kconfig
> - sja1105: link device config to the of_matching data.
> - KSZ9477: add code origin comment
> - ethlog: do not check on already registered monitor
>
> changes v4:
> - ethlog: add patch description
> - dsa: fix spelling
> - dsa: make sure cpu port count incremented on every port
> - dsa: rework error handling
> - dsa: make sure port_enable/port_disable are optional
> - dsa: make use of of_phy_register_fixed_link()
> - sja1105: use dev_err instead of printf
> - sja1105: do sanity check on dsa_register
> - ksz9477: rework spi_write function
> - ksz9477: do not clean PORT_TX/RX_ENABLE flags
>
> changes v3:
> - remove no needed work artifact ksz9477_old.c
>
> changes v2:
> - mane sure optional functions are called conditionally
> - add support for ksz9477 and ksz9893
> - add ethlog, kind of replacement for tshark or tcpdump
>
> Oleksij Rempel (14):
> net: add RX preprocessor support
> net: add of_find_eth_device_by_node() function
> net: phy: export of_phy_register_fixed_link() function
> net: add DSA framework to support basic switch functionality
> driver: add dev_get_priv() helper
> net: port part of if_vlan header from kernel v5.17
> spi: port spi_sync_transfer() function from kernel v5.17
> net: mdio: add MDIO_DEVAD_NONE define
> net: phy: make sure MDIO bus is probed if we search for the PHY
> of_net: add rev-rmii support
> net: dsa: add support for SJA11xx switches
> net: dsa: add KSZ9477 switch SPI driver
> hexdump: provide support for dev_print_hex_dump()
> add ethlog command
>
> commands/Kconfig | 8 +
> commands/Makefile | 1 +
> commands/ethlog.c | 80 +
> drivers/net/Kconfig | 31 +
> drivers/net/Makefile | 3 +
> drivers/net/dsa.c | 444 ++++
> drivers/net/ksz9477.c | 566 +++++
> drivers/net/phy/phy.c | 5 +-
> drivers/net/sja1105.c | 2987 +++++++++++++++++++++++++++
> drivers/of/of_net.c | 1 +
> include/driver.h | 5 +
> include/dsa.h | 90 +
> include/linux/if_vlan.h | 56 +
> include/linux/mdio.h | 2 +
> include/linux/phy.h | 3 +
> include/net.h | 15 +
> include/platform_data/ksz9477_reg.h | 1665 +++++++++++++++
> include/printk.h | 14 +-
> include/spi/spi.h | 24 +
> lib/hexdump.c | 22 +-
> net/eth.c | 20 +-
> net/net.c | 14 +
> 22 files changed, 6042 insertions(+), 14 deletions(-)
> create mode 100644 commands/ethlog.c
> create mode 100644 drivers/net/dsa.c
> create mode 100644 drivers/net/ksz9477.c
> create mode 100644 drivers/net/sja1105.c
> create mode 100644 include/dsa.h
> create mode 100644 include/linux/if_vlan.h
> create mode 100644 include/platform_data/ksz9477_reg.h
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2022-04-14 7:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-13 8:21 Oleksij Rempel
2022-04-13 8:21 ` [PATCH v5 01/14] net: add RX preprocessor support Oleksij Rempel
2022-04-13 8:21 ` [PATCH v5 02/14] net: add of_find_eth_device_by_node() function Oleksij Rempel
2022-04-13 8:21 ` [PATCH v5 03/14] net: phy: export of_phy_register_fixed_link() function Oleksij Rempel
2022-04-13 8:21 ` [PATCH v5 04/14] net: add DSA framework to support basic switch functionality Oleksij Rempel
2022-04-13 8:21 ` [PATCH v5 05/14] driver: add dev_get_priv() helper Oleksij Rempel
2022-04-13 8:21 ` [PATCH v5 06/14] net: port part of if_vlan header from kernel v5.17 Oleksij Rempel
2022-04-13 8:21 ` [PATCH v5 07/14] spi: port spi_sync_transfer() function " Oleksij Rempel
2022-04-13 8:21 ` [PATCH v5 08/14] net: mdio: add MDIO_DEVAD_NONE define Oleksij Rempel
2022-04-13 8:22 ` [PATCH v5 09/14] net: phy: make sure MDIO bus is probed if we search for the PHY Oleksij Rempel
2022-04-13 8:22 ` [PATCH v5 10/14] of_net: add rev-rmii support Oleksij Rempel
2022-04-13 8:22 ` [PATCH v5 11/14] net: dsa: add support for SJA11xx switches Oleksij Rempel
2022-04-13 8:22 ` [PATCH v5 12/14] net: dsa: add KSZ9477 switch SPI driver Oleksij Rempel
2022-07-30 9:10 ` Ahmad Fatoum
2022-07-30 11:27 ` Oleksij Rempel
2022-04-13 8:22 ` [PATCH v5 13/14] hexdump: provide support for dev_print_hex_dump() Oleksij Rempel
2022-04-13 8:22 ` [PATCH v5 14/14] add ethlog command Oleksij Rempel
2022-04-14 7:42 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220414074234.GG4012@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox