From: Sascha Hauer <sha@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org, ore@pengutronix.de
Subject: Re: [PATCH master v3 0/3] ARM: rpi3: fix misc recent breakage
Date: Mon, 25 Apr 2022 12:35:22 +0200 [thread overview]
Message-ID: <20220425103522.GJ4012@pengutronix.de> (raw)
In-Reply-To: <20220425094857.674044-1-a.fatoum@pengutronix.de>
On Mon, Apr 25, 2022 at 11:48:54AM +0200, Ahmad Fatoum wrote:
> barebox v2022.04.0 on the Raspberry Pi 3b is malformated, silent on the
> mini UART and slow. Fix the root causes behind these issues.
>
> This series is a bit bigger than what normally goes direct into master,
> but I'd prefer it's applied directly to master, so we have the proper
> fixes in v2022.05.0.
>
> v2 -> v3:
> - add intermediate NAKED noinline function only for ARM32 where it's
> needed
> - reuse ENTRY_FUNCTION instead of opencoding it
>
> v1 -> v2:
> - remove duplicated __ARM_SETUP_STACK
>
> Ahmad Fatoum (3):
> ARM: asm: fix miscompilation of 32-bit ENTRY_FUNCTION_WITHSTACK
> clk: add BCM2835 auxiliary peripheral clock driver
> clocksource: assign non-zero priorities to all clocksources
Applied, thanks
Sascha
>
> arch/arm/include/asm/barebox-arm.h | 14 ++++-
> arch/arm/mach-at91/at91rm9200_time.c | 1 +
> arch/arm/mach-davinci/time.c | 1 +
> arch/arm/mach-ep93xx/clocksource.c | 1 +
> arch/arm/mach-mxs/clocksource-imx23.c | 1 +
> arch/arm/mach-mxs/clocksource-imx28.c | 1 +
> arch/arm/mach-pxa/clocksource.c | 1 +
> arch/arm/mach-samsung/s3c-timer.c | 1 +
> arch/arm/mach-tegra/tegra20-timer.c | 1 +
> arch/arm/mach-versatile/core.c | 1 +
> arch/mips/lib/csrc-r4k.c | 1 +
> arch/mips/mach-xburst/csrc-jz4750.c | 1 +
> arch/openrisc/lib/clock.c | 1 +
> arch/powerpc/mach-mpc5xxx/time.c | 1 +
> arch/powerpc/mach-mpc85xx/time.c | 1 +
> arch/sandbox/board/clock.c | 1 +
> drivers/clk/Makefile | 1 +
> drivers/clk/bcm/Makefile | 2 +
> drivers/clk/bcm/clk-bcm2835-aux.c | 66 +++++++++++++++++++++
> drivers/clocksource/amba-sp804.c | 1 +
> drivers/clocksource/arm_architected_timer.c | 1 +
> drivers/clocksource/arm_global_timer.c | 1 +
> drivers/clocksource/arm_smp_twd.c | 1 +
> drivers/clocksource/armv7m_systick.c | 1 +
> drivers/clocksource/bcm2835.c | 1 +
> drivers/clocksource/clps711x.c | 1 +
> drivers/clocksource/digic.c | 1 +
> drivers/clocksource/dw_apb_timer.c | 1 +
> drivers/clocksource/efi.c | 1 +
> drivers/clocksource/kvx_timer.c | 1 +
> drivers/clocksource/mvebu.c | 1 +
> drivers/clocksource/nomadik.c | 1 +
> drivers/clocksource/orion.c | 1 +
> drivers/clocksource/rk_timer.c | 1 +
> drivers/clocksource/timer-atmel-pit.c | 1 +
> drivers/clocksource/timer-imx-gpt.c | 1 +
> drivers/clocksource/timer-ti-32k.c | 1 +
> drivers/clocksource/timer-ti-dm.c | 1 +
> drivers/clocksource/uemd.c | 1 +
> 39 files changed, 117 insertions(+), 1 deletion(-)
> create mode 100644 drivers/clk/bcm/Makefile
> create mode 100644 drivers/clk/bcm/clk-bcm2835-aux.c
>
> --
> 2.30.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2022-04-25 10:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-25 9:48 Ahmad Fatoum
2022-04-25 9:48 ` [PATCH master v3 1/3] ARM: asm: fix miscompilation of 32-bit ENTRY_FUNCTION_WITHSTACK Ahmad Fatoum
2022-04-25 9:48 ` [PATCH master v3 2/3] clk: add BCM2835 auxiliary peripheral clock driver Ahmad Fatoum
2022-04-25 9:48 ` [PATCH master v3 3/3] clocksource: assign non-zero priorities to all clocksources Ahmad Fatoum
2022-04-25 10:35 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220425103522.GJ4012@pengutronix.de \
--to=sha@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=ore@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox