* [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices
@ 2022-05-10 12:12 Oleksij Rempel
2022-05-10 12:12 ` [PATCH v1 2/2] phy: stm32-usphyc: Add dummy driver for child node Oleksij Rempel
2022-05-11 6:30 ` [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices Sascha Hauer
0 siblings, 2 replies; 3+ messages in thread
From: Oleksij Rempel @ 2022-05-10 12:12 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
Port chip specific configuration for stm32mp15x SoC from kernel v5.18-rc4.
This patch is needed to fix USB host support on OTG port. Tested on stm32mp151.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/usb/dwc2/dwc2.c | 51 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/drivers/usb/dwc2/dwc2.c b/drivers/usb/dwc2/dwc2.c
index 1b5981c2d5..8cb99446e4 100644
--- a/drivers/usb/dwc2/dwc2.c
+++ b/drivers/usb/dwc2/dwc2.c
@@ -13,9 +13,49 @@
#include <driver.h>
#include <linux/clk.h>
#include <linux/reset.h>
+#include <of_device.h>
#include "dwc2.h"
+static void dwc2_set_stm32mp15_fsotg_params(struct dwc2 *dwc2)
+{
+ struct dwc2_core_params *p = &dwc2->params;
+
+ p->otg_cap &= ~(DWC2_CAP_PARAM_HNP_SRP_CAPABLE
+ | DWC2_CAP_PARAM_SRP_ONLY_CAPABLE);
+ p->otg_cap |= DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->speed = DWC2_SPEED_PARAM_FULL;
+ p->host_rx_fifo_size = 128;
+ p->host_nperio_tx_fifo_size = 96;
+ p->host_perio_tx_fifo_size = 96;
+ p->max_packet_count = 256;
+ p->phy_type = DWC2_PHY_TYPE_PARAM_FS;
+ p->i2c_enable = false;
+ p->activate_stm_fs_transceiver = true;
+ p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
+ p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+ p->host_support_fs_ls_low_power = true;
+ p->host_ls_low_power_phy_clk = true;
+}
+
+static void dwc2_set_stm32mp15_hsotg_params(struct dwc2 *dwc2)
+{
+ struct dwc2_core_params *p = &dwc2->params;
+
+ p->otg_cap &= ~(DWC2_CAP_PARAM_HNP_SRP_CAPABLE
+ | DWC2_CAP_PARAM_SRP_ONLY_CAPABLE);
+ p->otg_cap |= DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->host_rx_fifo_size = 440;
+ p->host_nperio_tx_fifo_size = 256;
+ p->host_perio_tx_fifo_size = 256;
+ p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
+ p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+ p->lpm = false;
+ p->lpm_clock_gating = false;
+ p->besl = false;
+ p->hird_threshold_en = false;
+}
+
static int dwc2_set_mode(void *ctx, enum usb_dr_mode mode)
{
struct dwc2 *dwc2 = ctx;
@@ -43,10 +83,13 @@ static int dwc2_set_mode(void *ctx, enum usb_dr_mode mode)
return ret;
}
+typedef void (*set_params_cb)(struct dwc2 *dwc2);
+
static int dwc2_probe(struct device_d *dev)
{
struct resource *iores;
struct dwc2 *dwc2;
+ set_params_cb set_params;
int ret;
dwc2 = xzalloc(sizeof(*dwc2));
@@ -107,6 +150,10 @@ static int dwc2_probe(struct device_d *dev)
dwc2_set_default_params(dwc2);
+ set_params = of_device_get_match_data(dev);
+ if (set_params)
+ set_params(dwc2);
+
dma_set_mask(dev, DMA_BIT_MASK(32));
dev->priv = dwc2;
@@ -148,6 +195,10 @@ static const struct of_device_id dwc2_platform_dt_ids[] = {
{ .compatible = "brcm,bcm2835-usb", },
{ .compatible = "brcm,bcm2708-usb", },
{ .compatible = "snps,dwc2", },
+ { .compatible = "st,stm32mp15-fsotg",
+ .data = dwc2_set_stm32mp15_fsotg_params },
+ { .compatible = "st,stm32mp15-hsotg",
+ .data = dwc2_set_stm32mp15_hsotg_params },
{ }
};
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH v1 2/2] phy: stm32-usphyc: Add dummy driver for child node
2022-05-10 12:12 [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices Oleksij Rempel
@ 2022-05-10 12:12 ` Oleksij Rempel
2022-05-11 6:30 ` [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Oleksij Rempel @ 2022-05-10 12:12 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
To satisfy deep probe mechanism
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/phy/phy-stm32-usbphyc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c
index 4c1d7bfa48..2fa1f0fd01 100644
--- a/drivers/phy/phy-stm32-usbphyc.c
+++ b/drivers/phy/phy-stm32-usbphyc.c
@@ -423,10 +423,17 @@ static int stm32_usbphyc_probe(struct device_d *dev)
for_each_child_of_node(np, child) {
struct stm32_usbphyc_phy *usbphyc_phy;
+ struct device_d *phydev;
struct phy *phy;
u32 index;
- phy = phy_create(dev, child, &stm32_usbphyc_phy_ops);
+ phydev = of_platform_device_create(child, dev);
+ if (!phydev)
+ continue;
+
+ of_platform_device_dummy_drv(phydev);
+
+ phy = phy_create(phydev, child, &stm32_usbphyc_phy_ops);
if (IS_ERR(phy)) {
ret = PTR_ERR(phy);
if (ret != -EPROBE_DEFER)
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices
2022-05-10 12:12 [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices Oleksij Rempel
2022-05-10 12:12 ` [PATCH v1 2/2] phy: stm32-usphyc: Add dummy driver for child node Oleksij Rempel
@ 2022-05-11 6:30 ` Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Sascha Hauer @ 2022-05-11 6:30 UTC (permalink / raw)
To: Oleksij Rempel; +Cc: barebox
On Tue, May 10, 2022 at 02:12:41PM +0200, Oleksij Rempel wrote:
> Port chip specific configuration for stm32mp15x SoC from kernel v5.18-rc4.
> This patch is needed to fix USB host support on OTG port. Tested on stm32mp151.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> drivers/usb/dwc2/dwc2.c | 51 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/drivers/usb/dwc2/dwc2.c b/drivers/usb/dwc2/dwc2.c
> index 1b5981c2d5..8cb99446e4 100644
> --- a/drivers/usb/dwc2/dwc2.c
> +++ b/drivers/usb/dwc2/dwc2.c
> @@ -13,9 +13,49 @@
> #include <driver.h>
> #include <linux/clk.h>
> #include <linux/reset.h>
> +#include <of_device.h>
>
> #include "dwc2.h"
>
> +static void dwc2_set_stm32mp15_fsotg_params(struct dwc2 *dwc2)
> +{
> + struct dwc2_core_params *p = &dwc2->params;
> +
> + p->otg_cap &= ~(DWC2_CAP_PARAM_HNP_SRP_CAPABLE
> + | DWC2_CAP_PARAM_SRP_ONLY_CAPABLE);
> + p->otg_cap |= DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
> + p->speed = DWC2_SPEED_PARAM_FULL;
> + p->host_rx_fifo_size = 128;
> + p->host_nperio_tx_fifo_size = 96;
> + p->host_perio_tx_fifo_size = 96;
> + p->max_packet_count = 256;
> + p->phy_type = DWC2_PHY_TYPE_PARAM_FS;
> + p->i2c_enable = false;
> + p->activate_stm_fs_transceiver = true;
> + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
> + p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
> + p->host_support_fs_ls_low_power = true;
> + p->host_ls_low_power_phy_clk = true;
> +}
> +
> +static void dwc2_set_stm32mp15_hsotg_params(struct dwc2 *dwc2)
> +{
> + struct dwc2_core_params *p = &dwc2->params;
> +
> + p->otg_cap &= ~(DWC2_CAP_PARAM_HNP_SRP_CAPABLE
> + | DWC2_CAP_PARAM_SRP_ONLY_CAPABLE);
> + p->otg_cap |= DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
> + p->host_rx_fifo_size = 440;
> + p->host_nperio_tx_fifo_size = 256;
> + p->host_perio_tx_fifo_size = 256;
> + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
> + p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
> + p->lpm = false;
> + p->lpm_clock_gating = false;
> + p->besl = false;
> + p->hird_threshold_en = false;
> +}
> +
> static int dwc2_set_mode(void *ctx, enum usb_dr_mode mode)
> {
> struct dwc2 *dwc2 = ctx;
> @@ -43,10 +83,13 @@ static int dwc2_set_mode(void *ctx, enum usb_dr_mode mode)
> return ret;
> }
>
> +typedef void (*set_params_cb)(struct dwc2 *dwc2);
> +
> static int dwc2_probe(struct device_d *dev)
> {
> struct resource *iores;
> struct dwc2 *dwc2;
> + set_params_cb set_params;
> int ret;
>
> dwc2 = xzalloc(sizeof(*dwc2));
> @@ -107,6 +150,10 @@ static int dwc2_probe(struct device_d *dev)
>
> dwc2_set_default_params(dwc2);
>
> + set_params = of_device_get_match_data(dev);
> + if (set_params)
> + set_params(dwc2);
> +
> dma_set_mask(dev, DMA_BIT_MASK(32));
> dev->priv = dwc2;
>
> @@ -148,6 +195,10 @@ static const struct of_device_id dwc2_platform_dt_ids[] = {
> { .compatible = "brcm,bcm2835-usb", },
> { .compatible = "brcm,bcm2708-usb", },
> { .compatible = "snps,dwc2", },
> + { .compatible = "st,stm32mp15-fsotg",
> + .data = dwc2_set_stm32mp15_fsotg_params },
> + { .compatible = "st,stm32mp15-hsotg",
> + .data = dwc2_set_stm32mp15_hsotg_params },
> { }
> };
>
> --
> 2.30.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-05-11 6:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-10 12:12 [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices Oleksij Rempel
2022-05-10 12:12 ` [PATCH v1 2/2] phy: stm32-usphyc: Add dummy driver for child node Oleksij Rempel
2022-05-11 6:30 ` [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox