From: Sam Ravnborg <sam@ravnborg.org>
To: barebox@lists.infradead.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [RFC PATCH v1 0/8] ARM: at91: Add pbl support to skov-arm9cpu
Date: Sun, 15 May 2022 21:37:59 +0200 [thread overview]
Message-ID: <20220515193807.354903-1-sam@ravnborg.org> (raw)
The following is the current set of patches so far to support
PBL for the skov-arm9cpu.
The pwm is not really part of this - but it is part of the story.
The patch-set was triggered when someone reported a bug in the
atmel pwm code. The code did not build - so I ported it over.
Now I wanted to boot the target, but at91bootstrap no longer
supports the at91sam9263. So I decided to try to make it work
in barebox. I have tried this before and failed - but it should
be possible...
What I have made is modelled on top of all the great work
for other more modern atmel bouards.
This is an RFC - because the code does not yet work :-(
It fails to mount the SD Card - for reasons I am yet to discover.
Most of the code is attempted to be generic so we can use it
for other targets.
Feedback on the general structure would be nice.
But otherwise just consider this a short status that something
is in the works and I may return to this later - no promises
on the timeframe though.
Sam
Sam Ravnborg (8):
pwm: atmel: Fix build and update
ARM: at91: Provide at91_mux_pio_pin for use in lowlevel
ARM: at91: Add at91sam9 xload_mmc for PBL use
ARM: at91: Add extra register definitions
ARM: at91: Add lowlevel helpers for at91sam9263
ARM: at91: Make sdramc.h useable in multi image builds
ARM: at91: Add initialize function to sdramc
ARM: at91: Add xload support to skov-arm9cpu
arch/arm/boards/skov-arm9cpu/lowlevel.c | 148 +++-----
arch/arm/mach-at91/Kconfig | 4 +-
arch/arm/mach-at91/Makefile | 4 +-
arch/arm/mach-at91/at91sam9_sdramc_ll.c | 67 ++++
arch/arm/mach-at91/at91sam9_xload_mmc.c | 115 +++++++
arch/arm/mach-at91/include/mach/at91_pmc.h | 2 +
arch/arm/mach-at91/include/mach/at91sam9263.h | 14 +
.../mach-at91/include/mach/at91sam9263_matrix.h | 23 +-
arch/arm/mach-at91/include/mach/at91sam926x.h | 2 +
arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 165 ++++++---
arch/arm/mach-at91/include/mach/gpio.h | 25 ++
arch/arm/mach-at91/include/mach/sam92_ll.h | 54 +++
arch/arm/mach-at91/include/mach/xload.h | 4 +
arch/arm/mach-at91/sam9263_ll.c | 216 ++++++++++++
drivers/pwm/pwm-atmel.c | 383 +++++++++++++++------
images/Makefile.at91 | 5 +
16 files changed, 981 insertions(+), 250 deletions(-)
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2022-05-15 19:40 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-15 19:37 Sam Ravnborg [this message]
2022-05-15 19:38 ` [PATCH v1 1/8] pwm: atmel: Fix build and update Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 2/8] ARM: at91: Provide at91_mux_pio_pin for use in lowlevel Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 3/8] ARM: at91: Add at91sam9 xload_mmc for PBL use Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 4/8] ARM: at91: Add extra register definitions Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 5/8] ARM: at91: Add lowlevel helpers for at91sam9263 Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 6/8] ARM: at91: Make sdramc.h useable in multi image builds Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 7/8] ARM: at91: Add initialize function to sdramc Sam Ravnborg
2022-05-16 10:47 ` Ahmad Fatoum
2022-05-16 15:13 ` Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu Sam Ravnborg
2022-05-16 11:15 ` Ahmad Fatoum
2022-05-16 15:28 ` Sam Ravnborg
2022-05-16 15:35 ` Ahmad Fatoum
2022-05-16 15:47 ` Ahmad Fatoum
2022-05-30 7:20 ` [RFC PATCH v1 0/8] ARM: at91: Add pbl " Sam Ravnborg
2022-06-28 19:23 ` Sam Ravnborg
2022-06-28 21:12 ` Ahmad Fatoum
2022-06-28 21:18 ` Sam Ravnborg
2022-06-28 21:20 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220515193807.354903-1-sam@ravnborg.org \
--to=sam@ravnborg.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox