From: Sam Ravnborg <sam@ravnborg.org>
To: barebox@lists.infradead.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH v1 7/8] ARM: at91: Add initialize function to sdramc
Date: Sun, 15 May 2022 21:38:06 +0200 [thread overview]
Message-ID: <20220515193807.354903-8-sam@ravnborg.org> (raw)
In-Reply-To: <20220515193807.354903-1-sam@ravnborg.org>
Port the sdramc initialize function from at91bootstrap.
It is needed from lowlevel code and is a replacement for the
sdramc init code in at91sam926x_board_init.h
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
arch/arm/mach-at91/Makefile | 2 +-
arch/arm/mach-at91/at91sam9_sdramc_ll.c | 67 +++++++++++++++++++
.../mach-at91/include/mach/at91sam9_sdramc.h | 12 ++++
3 files changed, 80 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-at91/at91sam9_sdramc_ll.c
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 56c2a3170..390d49d03 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-y += setup.o aic.o
-lwl-y += at91_pmc_ll.o ddramc_ll.o matrix.o
+lwl-y += at91_pmc_ll.o ddramc_ll.o at91sam9_sdramc_ll.o matrix.o
lwl-$(CONFIG_CLOCKSOURCE_ATMEL_PIT) += early_udelay.o
ifeq ($(CONFIG_COMMON_CLK_OF_PROVIDER),)
diff --git a/arch/arm/mach-at91/at91sam9_sdramc_ll.c b/arch/arm/mach-at91/at91sam9_sdramc_ll.c
new file mode 100644
index 000000000..b43654364
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9_sdramc_ll.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: BSD-1-Clause
+/*
+ * Copyright (c) 2006, Atmel Corporation
+ */
+#include <mach/at91sam9_sdramc.h>
+
+static inline void sdramc_wr(const struct at91sam9_sdramc_config *config,
+ unsigned int offset,
+ const unsigned int value)
+{
+ writel(value, config->sdramc + offset);
+}
+
+int at91sam9_sdramc_initialize(const struct at91sam9_sdramc_config *config,
+ unsigned int sdram_address)
+{
+ unsigned int i;
+
+ /* Step#1 SDRAM feature must be in the configuration register */
+ sdramc_wr(config, AT91_SDRAMC_CR, config->cr);
+
+ /* Step#2 For mobile SDRAM, temperature-compensated self refresh(TCSR),... */
+
+ /* Step#3 The SDRAM memory type must be set in the Memory Device Register */
+ sdramc_wr(config, AT91_SDRAMC_MDR, config->mdr);
+
+ /* Step#4 The minimum pause of 200 us is provided to precede any single toggle */
+ for (i = 0; i < 1000; i++) ;
+
+ /* Step#5 A NOP command is issued to the SDRAM devices */
+ sdramc_wr(config, AT91_SDRAMC_MR, AT91_SDRAMC_MODE_NOP);
+ writel(0x00000000, sdram_address);
+
+ /* Step#6 An All Banks Precharge command is issued to the SDRAM devices */
+ sdramc_wr(config, AT91_SDRAMC_MR, AT91_SDRAMC_MODE_PRECHARGE);
+ writel(0x00000000, sdram_address);
+
+ for (i = 0; i < 10000; i++) ;
+
+ /* Step#7 Eight auto-refresh cycles are provided */
+ for (i = 0; i < 8; i++) {
+ sdramc_wr(config, AT91_SDRAMC_MR, AT91_SDRAMC_MODE_REFRESH);
+ writel(0x00000001 + i, sdram_address + 4 + 4 * i);
+ }
+
+ /* Pause cycles */
+ for (i = 0; i < 1000; i++) ;
+
+ /* Step#8 A Mode Register set (MRS) cyscle is issued to program the SDRAM parameters(TCSR, PASR, DS) */
+ sdramc_wr(config, AT91_SDRAMC_MR, AT91_SDRAMC_MODE_LMR);
+ writel(0xcafedede, sdram_address + 0x24);
+
+ /* Pause cycles */
+ for (i = 0; i < 1000; i++) ;
+
+ /* Step#9 For mobile SDRAM initialization, an Extended Mode Register set cycle is issued to ... */
+
+ /* Step#10 The application must go into Normal Mode, setting Mode to 0 in the Mode Register
+ and perform a write access at any location in the SDRAM. */
+ sdramc_wr(config, AT91_SDRAMC_MR, AT91_SDRAMC_MODE_NORMAL); // Set Normal mode
+ writel(0x00000000, sdram_address); // Perform Normal mode
+
+ /* Step#11 Write the refresh rate into the count field in the SDRAMC Refresh Timer Rgister. */
+ sdramc_wr(config, AT91_SDRAMC_TR, config->tr);
+
+ return 0;
+}
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index fe76f60b0..0e05387aa 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -181,6 +181,18 @@
#include <mach/at91sam9261.h>
#include <mach/at91sam9263.h>
+struct at91sam9_sdramc_config {
+ void __iomem *sdramc;
+ unsigned int mr;
+ unsigned int tr;
+ unsigned int cr;
+ unsigned int lpr;
+ unsigned int mdr;
+};
+
+int at91sam9_sdramc_initialize(const struct at91sam9_sdramc_config *config,
+ unsigned int sdram_address);
+
static inline u32 at91_get_sdram_size(void *base)
{
u32 val;
--
2.34.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2022-05-15 19:40 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-15 19:37 [RFC PATCH v1 0/8] ARM: at91: Add pbl support to skov-arm9cpu Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 1/8] pwm: atmel: Fix build and update Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 2/8] ARM: at91: Provide at91_mux_pio_pin for use in lowlevel Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 3/8] ARM: at91: Add at91sam9 xload_mmc for PBL use Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 4/8] ARM: at91: Add extra register definitions Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 5/8] ARM: at91: Add lowlevel helpers for at91sam9263 Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 6/8] ARM: at91: Make sdramc.h useable in multi image builds Sam Ravnborg
2022-05-15 19:38 ` Sam Ravnborg [this message]
2022-05-16 10:47 ` [PATCH v1 7/8] ARM: at91: Add initialize function to sdramc Ahmad Fatoum
2022-05-16 15:13 ` Sam Ravnborg
2022-05-15 19:38 ` [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu Sam Ravnborg
2022-05-16 11:15 ` Ahmad Fatoum
2022-05-16 15:28 ` Sam Ravnborg
2022-05-16 15:35 ` Ahmad Fatoum
2022-05-16 15:47 ` Ahmad Fatoum
2022-05-30 7:20 ` [RFC PATCH v1 0/8] ARM: at91: Add pbl " Sam Ravnborg
2022-06-28 19:23 ` Sam Ravnborg
2022-06-28 21:12 ` Ahmad Fatoum
2022-06-28 21:18 ` Sam Ravnborg
2022-06-28 21:20 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220515193807.354903-8-sam@ravnborg.org \
--to=sam@ravnborg.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox