From: Sascha Hauer <sha@pengutronix.de>
To: Alexander Shiyan <eagle.alexander923@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ARM: OMAP: xload: Fix compile without CONFIG_MTD
Date: Thu, 2 Jun 2022 08:55:15 +0200 [thread overview]
Message-ID: <20220602065515.GF1615@pengutronix.de> (raw)
In-Reply-To: <20220601071452.17033-1-eagle.alexander923@gmail.com>
On Wed, Jun 01, 2022 at 10:14:52AM +0300, Alexander Shiyan wrote:
> arm-linux-ld: arch/arm/mach-omap/xload.o: in function read_mtd_barebox':
> /home/ARM/barebox/arch/arm/mach-omap/xload.c:75: undefined reference to mtd_peb_read_file'
>
> Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
> ---
> arch/arm/mach-omap/xload.c | 72 ++++++++++++++++++--------------------
> 1 file changed, 34 insertions(+), 38 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
> index 6d3704b8cf..78b2221304 100644
> --- a/arch/arm/mach-omap/xload.c
> +++ b/arch/arm/mach-omap/xload.c
> @@ -53,46 +53,44 @@ static void *read_mtd_barebox(const char *part, unsigned int start, unsigned int
> struct mtd_info *mtd;
> unsigned int ps, pe;
>
> - if (!IS_ENABLED(CONFIG_MTD)) {
> - printf("Cannot load from nand/nor: MTD support is disabled\n");
> - return NULL;
> - }
> + if (IS_ENABLED(CONFIG_MTD)) {
> + cdev = cdev_open_by_name(part, O_RDONLY);
> + if (!cdev) {
> + printf("failed to open partition\n");
> + return NULL;
> + }
>
> - cdev = cdev_open_by_name(part, O_RDONLY);
> - if (!cdev) {
> - printf("failed to open partition\n");
> - return NULL;
> - }
> + mtd = cdev->mtd;
> + if (!mtd)
> + return NULL;
>
> - mtd = cdev->mtd;
> - if (!mtd)
> - return NULL;
> + if (mtd_mod_by_eb(start, mtd) != 0) {
> + printf("Start must be eraseblock aligned\n");
> + return NULL;
> + }
>
> - if (mtd_mod_by_eb(start, mtd) != 0) {
> - printf("Start must be eraseblock aligned\n");
> - return NULL;
> - }
> + to = xmalloc(size);
>
> - to = xmalloc(size);
> + ps = mtd_div_by_eb(start, mtd);
> + pe = mtd_div_by_eb(start + size, mtd);
> + ret = mtd_peb_read_file(mtd, ps, pe, to, size);
> + if (ret) {
> + printf("Can't read image from %s: %d\n", part, ret);
> + goto err;
> + }
>
> - ps = mtd_div_by_eb(start, mtd);
> - pe = mtd_div_by_eb(start + size, mtd);
> - ret = mtd_peb_read_file(mtd, ps, pe, to, size);
> - if (ret) {
> - printf("Can't read image from %s: %d\n", part, ret);
> - goto err;
> - }
> + size = get_image_size(to);
> + if (!size) {
> + printf("failed to get image size\n");
> + goto err;
> + }
>
> - size = get_image_size(to);
> - if (!size) {
> - printf("failed to get image size\n");
> - goto err;
> - }
> + return to;
>
> - return to;
> + err:
> + free(to);
> + }
>
> -err:
> - free(to);
> return NULL;
> }
>
> @@ -292,7 +290,7 @@ static void *am33xx_net_boot(void)
> */
> static __noreturn int omap_xload(void)
> {
> - void *func;
> + void *func = NULL;
>
> if (!barebox_part)
> barebox_part = &default_part;
> @@ -310,10 +308,8 @@ static __noreturn int omap_xload(void)
> } else if (IS_ENABLED(CONFIG_FS_OMAP4_USBBOOT)) {
> printf("booting from USB\n");
> func = omap4_xload_boot_usb();
> - } else {
> + } else
> printf("booting from USB not enabled\n");
> - func = NULL;
> - }
> break;
> case BOOTSOURCE_NAND:
> printf("booting from NAND\n");
> @@ -327,16 +323,16 @@ static __noreturn int omap_xload(void)
> if (IS_ENABLED(CONFIG_OMAP_SERIALBOOT)) {
> printf("booting from serial\n");
> func = omap_serial_boot();
> - break;
> }
> + break;
> case BOOTSOURCE_NET:
> if (IS_ENABLED(CONFIG_AM33XX_NET_BOOT)) {
> printf("booting from NET\n");
> func = am33xx_net_boot();
> - break;
> } else {
> printf("booting from network not enabled\n");
> }
> + break;
> default:
> printf("unknown boot source. Fall back to nand\n");
> func = omap_xload_boot_nand(barebox_part);
> --
> 2.32.0
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2022-06-02 6:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-01 7:14 Alexander Shiyan
2022-06-02 6:55 ` Sascha Hauer [this message]
2022-06-02 8:07 ` Ahmad Fatoum
2022-06-02 8:59 ` Alexander Shiyan
2022-06-02 9:01 ` Ahmad Fatoum
2022-06-02 9:10 ` Alexander Shiyan
2022-06-03 6:56 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220602065515.GF1615@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=eagle.alexander923@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox