* [PATCH 2/2] ARM: mnt-reform: switch to upstream DT
2022-06-09 21:43 [PATCH 1/2] arm: imx8mq: re-enable DDRC for Barebox Lucas Stach
@ 2022-06-09 21:43 ` Lucas Stach
2022-06-10 7:45 ` [PATCH 1/2] arm: imx8mq: re-enable DDRC for Barebox Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Lucas Stach @ 2022-06-09 21:43 UTC (permalink / raw)
To: barebox
Now that all the necessary bits are upstream, we drop most of
the Barebox DT for this board.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/dts/imx8mq-mnt-reform2.dts | 164 +---------------------------
1 file changed, 1 insertion(+), 163 deletions(-)
diff --git a/arch/arm/dts/imx8mq-mnt-reform2.dts b/arch/arm/dts/imx8mq-mnt-reform2.dts
index 5a65324b3c75..deb31abe5414 100644
--- a/arch/arm/dts/imx8mq-mnt-reform2.dts
+++ b/arch/arm/dts/imx8mq-mnt-reform2.dts
@@ -6,17 +6,12 @@
/dts-v1/;
-#include <arm64/freescale/imx8mq.dtsi>
+#include <arm64/freescale/imx8mq-mnt-reform2.dts>
#include "imx8mq.dtsi"
#include "imx8mq-ddrc.dtsi"
/ {
- model = "MNT Reform2";
- compatible = "mntre,reform2", "fsl,imx8mq";
-
chosen {
- stdout-path = &uart1;
-
environment-emmc {
compatible = "barebox,environment";
device-path = &usdhc1, "partname:barebox-environment";
@@ -29,86 +24,13 @@
status = "disabled";
};
};
-
- pcie1_refclk: pcie1-refclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <100000000>;
- };
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <4>;
- interrupts = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
- };
};
&ocotp {
barebox,provide-mac-address = <&fec1 0x640>;
};
-&pcie1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie1>;
- reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>;
- clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
- <&clk IMX8MQ_CLK_PCIE2_AUX>,
- <&clk IMX8MQ_CLK_PCIE2_PHY>,
- <&pcie1_refclk>;
- clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&usb3_phy0 {
- status = "okay";
-};
-
-&usb3_phy1 {
- status = "okay";
-};
-
-&usb_dwc3_0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&usb_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
&usdhc1 {
- assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
- assigned-clock-rates = <400000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- bus-width = <8>;
- no-mmc-hs400;
- non-removable;
- no-sd;
- no-sdio;
- status = "okay";
-
#address-cells = <1>;
#size-cells = <1>;
@@ -124,14 +46,6 @@
};
&usdhc2 {
- assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
- assigned-clock-rates = <200000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- bus-width = <4>;
- no-1-8-v;
- status = "okay";
-
#address-cells = <1>;
#size-cells = <1>;
@@ -145,79 +59,3 @@
reg = <0xe0000 0x20000>;
};
};
-
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
- MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
- MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
- MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
- MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
- MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
- MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
- MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
- MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
- MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0xd1
- MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
- MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
- MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
- MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0xd1
- MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x1
- MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x1
- >;
- };
-
- pinctrl_pcie1: pcie1grp {
- fsl,pins = <
- MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x16
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45
- MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x45
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
- MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
- MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
- MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
- MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
- MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
- MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
- MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
- MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
- MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
- MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x03
- MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
- MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
- MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
- MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
- MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc
- >;
- };
-
- pinctrl_wdog: wdog1grp {
- fsl,pins = <
- MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
- >;
- };
-};
--
2.36.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] arm: imx8mq: re-enable DDRC for Barebox
2022-06-09 21:43 [PATCH 1/2] arm: imx8mq: re-enable DDRC for Barebox Lucas Stach
2022-06-09 21:43 ` [PATCH 2/2] ARM: mnt-reform: switch to upstream DT Lucas Stach
@ 2022-06-10 7:45 ` Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Sascha Hauer @ 2022-06-10 7:45 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Thu, Jun 09, 2022 at 11:43:29PM +0200, Lucas Stach wrote:
> With Linux 5.18 the DDRC is disabled for most boards in the upstream
> DT, as it isn't used. Barebox however needs the DDRC node to be enabled
> as it has a driver to read the memory size from the controller and ends
> up with no available RAM without this driver being present.
>
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> ---
> arch/arm/dts/imx8mq-ddrc.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/dts/imx8mq-ddrc.dtsi b/arch/arm/dts/imx8mq-ddrc.dtsi
> index 1df39151a1cd..6961477eef38 100644
> --- a/arch/arm/dts/imx8mq-ddrc.dtsi
> +++ b/arch/arm/dts/imx8mq-ddrc.dtsi
> @@ -8,3 +8,7 @@
> /delete-node/ memory@40000000;
> };
>
> +&ddrc {
> + status = "okay";
> +};
> +
> --
> 2.36.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread