From: Marco Felsch <m.felsch@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/2] clk: imx8mm: remove SYS PLL 1/2 clock gates
Date: Thu, 16 Jun 2022 16:05:20 +0200 [thread overview]
Message-ID: <20220616140521.2263016-1-m.felsch@pengutronix.de> (raw)
This commit is based on commit dd977acd6 ("clk: imx8mp: remove SYS PLL
1/2 clock gates") and adopts kernel commit:
| commit d25cbd3e392730f459f1fbf5f959c16b460a59ca
| Author: Peng Fan <peng.fan@nxp.com>
| AuthorDate: Fri Feb 25 16:17:31 2022 +0800
| Commit: Abel Vesa <abel.vesa@nxp.com>
| CommitDate: Fri Mar 4 17:06:29 2022 +0200
|
| clk: imx8mm: remove SYS PLL 1/2 clock gates
|
| Remove the PLL 1/2 gates as it make AMP clock management harder without
| obvious benifit.
|
| Signed-off-by: Peng Fan <peng.fan@nxp.com>
| Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
| Link: https://lore.kernel.org/r/20220225081733.2294166-2-peng.fan@oss.nxp.com
| Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Unlike the original patch this one also makes sure that the removed
gates are enabled as they are needed for their consumers.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
drivers/clk/imx/clk-imx8mm.c | 65 ++++++++++++++++++------------------
1 file changed, 33 insertions(+), 32 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index e6927f58f4..d467062e64 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -280,6 +280,7 @@ static int imx8mm_clocks_init(struct device_node *ccm_np)
{
struct device_node *anatop_np;
void __iomem *ccm, *ana;
+ u32 val;
int ret;
anatop_np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-anatop");
@@ -340,45 +341,45 @@ static int imx8mm_clocks_init(struct device_node *ccm_np)
clks[IMX8MM_SYS_PLL3_OUT] = imx_clk_gate("sys_pll3_out", "sys_pll3_bypass", ana + 0x114, 11);
/* SYS PLL1 fixed output */
- clks[IMX8MM_SYS_PLL1_40M_CG] = imx_clk_gate("sys_pll1_40m_cg", "sys_pll1", ana + 0x94, 27);
- clks[IMX8MM_SYS_PLL1_80M_CG] = imx_clk_gate("sys_pll1_80m_cg", "sys_pll1", ana + 0x94, 25);
- clks[IMX8MM_SYS_PLL1_100M_CG] = imx_clk_gate("sys_pll1_100m_cg", "sys_pll1", ana + 0x94, 23);
- clks[IMX8MM_SYS_PLL1_133M_CG] = imx_clk_gate("sys_pll1_133m_cg", "sys_pll1", ana + 0x94, 21);
- clks[IMX8MM_SYS_PLL1_160M_CG] = imx_clk_gate("sys_pll1_160m_cg", "sys_pll1", ana + 0x94, 19);
- clks[IMX8MM_SYS_PLL1_200M_CG] = imx_clk_gate("sys_pll1_200m_cg", "sys_pll1", ana + 0x94, 17);
- clks[IMX8MM_SYS_PLL1_266M_CG] = imx_clk_gate("sys_pll1_266m_cg", "sys_pll1", ana + 0x94, 15);
- clks[IMX8MM_SYS_PLL1_400M_CG] = imx_clk_gate("sys_pll1_400m_cg", "sys_pll1", ana + 0x94, 13);
+ /*
+ * The gates in CCM_ANALOG_SYS_PLL1_GEN_CTRL are not handled by the
+ * driver, make sure they are all enabled.
+ */
+ val = readl(ana + 0x94);
+ val |= BIT(13) | BIT(15) | BIT(17) | BIT(19) | BIT(21) | BIT(23) | BIT(25) | BIT(27);
+ writel(val, ana + 0x94);
+
clks[IMX8MM_SYS_PLL1_OUT] = imx_clk_gate("sys_pll1_out", "sys_pll1", ana + 0x94, 11);
- clks[IMX8MM_SYS_PLL1_40M] = imx_clk_fixed_factor("sys_pll1_40m", "sys_pll1_40m_cg", 1, 20);
- clks[IMX8MM_SYS_PLL1_80M] = imx_clk_fixed_factor("sys_pll1_80m", "sys_pll1_80m_cg", 1, 10);
- clks[IMX8MM_SYS_PLL1_100M] = imx_clk_fixed_factor("sys_pll1_100m", "sys_pll1_100m_cg", 1, 8);
- clks[IMX8MM_SYS_PLL1_133M] = imx_clk_fixed_factor("sys_pll1_133m", "sys_pll1_133m_cg", 1, 6);
- clks[IMX8MM_SYS_PLL1_160M] = imx_clk_fixed_factor("sys_pll1_160m", "sys_pll1_160m_cg", 1, 5);
- clks[IMX8MM_SYS_PLL1_200M] = imx_clk_fixed_factor("sys_pll1_200m", "sys_pll1_200m_cg", 1, 4);
- clks[IMX8MM_SYS_PLL1_266M] = imx_clk_fixed_factor("sys_pll1_266m", "sys_pll1_266m_cg", 1, 3);
- clks[IMX8MM_SYS_PLL1_400M] = imx_clk_fixed_factor("sys_pll1_400m", "sys_pll1_400m_cg", 1, 2);
+ clks[IMX8MM_SYS_PLL1_40M] = imx_clk_fixed_factor("sys_pll1_40m", "sys_pll1_out", 1, 20);
+ clks[IMX8MM_SYS_PLL1_80M] = imx_clk_fixed_factor("sys_pll1_80m", "sys_pll1_out", 1, 10);
+ clks[IMX8MM_SYS_PLL1_100M] = imx_clk_fixed_factor("sys_pll1_100m", "sys_pll1_out", 1, 8);
+ clks[IMX8MM_SYS_PLL1_133M] = imx_clk_fixed_factor("sys_pll1_133m", "sys_pll1_out", 1, 6);
+ clks[IMX8MM_SYS_PLL1_160M] = imx_clk_fixed_factor("sys_pll1_160m", "sys_pll1_out", 1, 5);
+ clks[IMX8MM_SYS_PLL1_200M] = imx_clk_fixed_factor("sys_pll1_200m", "sys_pll1_out", 1, 4);
+ clks[IMX8MM_SYS_PLL1_266M] = imx_clk_fixed_factor("sys_pll1_266m", "sys_pll1_out", 1, 3);
+ clks[IMX8MM_SYS_PLL1_400M] = imx_clk_fixed_factor("sys_pll1_400m", "sys_pll1_out", 1, 2);
clks[IMX8MM_SYS_PLL1_800M] = imx_clk_fixed_factor("sys_pll1_800m", "sys_pll1_out", 1, 1);
/* SYS PLL2 fixed output */
- clks[IMX8MM_SYS_PLL2_50M_CG] = imx_clk_gate("sys_pll2_50m_cg", "sys_pll2", ana + 0x104, 27);
- clks[IMX8MM_SYS_PLL2_100M_CG] = imx_clk_gate("sys_pll2_100m_cg", "sys_pll2", ana + 0x104, 25);
- clks[IMX8MM_SYS_PLL2_125M_CG] = imx_clk_gate("sys_pll2_125m_cg", "sys_pll2", ana + 0x104, 23);
- clks[IMX8MM_SYS_PLL2_166M_CG] = imx_clk_gate("sys_pll2_166m_cg", "sys_pll2", ana + 0x104, 21);
- clks[IMX8MM_SYS_PLL2_200M_CG] = imx_clk_gate("sys_pll2_200m_cg", "sys_pll2", ana + 0x104, 19);
- clks[IMX8MM_SYS_PLL2_250M_CG] = imx_clk_gate("sys_pll2_250m_cg", "sys_pll2", ana + 0x104, 17);
- clks[IMX8MM_SYS_PLL2_333M_CG] = imx_clk_gate("sys_pll2_333m_cg", "sys_pll2", ana + 0x104, 15);
- clks[IMX8MM_SYS_PLL2_500M_CG] = imx_clk_gate("sys_pll2_500m_cg", "sys_pll2", ana + 0x104, 13);
+ /*
+ * The gates in CCM_ANALOG_SYS_PLL2_GEN_CTRL are not handled by the
+ * driver, make sure they are all enabled.
+ */
+ val = readl(ana + 0x104);
+ val |= BIT(13) | BIT(15) | BIT(17) | BIT(19) | BIT(21) | BIT(23) | BIT(25) | BIT(27);
+ writel(val, ana + 0x104);
+
clks[IMX8MM_SYS_PLL2_OUT] = imx_clk_gate("sys_pll2_out", "sys_pll2", ana + 0x104, 11);
- clks[IMX8MM_SYS_PLL2_50M] = imx_clk_fixed_factor("sys_pll2_50m", "sys_pll2_50m_cg", 1, 20);
- clks[IMX8MM_SYS_PLL2_100M] = imx_clk_fixed_factor("sys_pll2_100m", "sys_pll2_100m_cg", 1, 10);
- clks[IMX8MM_SYS_PLL2_125M] = imx_clk_fixed_factor("sys_pll2_125m", "sys_pll2_125m_cg", 1, 8);
- clks[IMX8MM_SYS_PLL2_166M] = imx_clk_fixed_factor("sys_pll2_166m", "sys_pll2_166m_cg", 1, 6);
- clks[IMX8MM_SYS_PLL2_200M] = imx_clk_fixed_factor("sys_pll2_200m", "sys_pll2_200m_cg", 1, 5);
- clks[IMX8MM_SYS_PLL2_250M] = imx_clk_fixed_factor("sys_pll2_250m", "sys_pll2_250m_cg", 1, 4);
- clks[IMX8MM_SYS_PLL2_333M] = imx_clk_fixed_factor("sys_pll2_333m", "sys_pll2_333m_cg", 1, 3);
- clks[IMX8MM_SYS_PLL2_500M] = imx_clk_fixed_factor("sys_pll2_500m", "sys_pll2_500m_cg", 1, 2);
+ clks[IMX8MM_SYS_PLL2_50M] = imx_clk_fixed_factor("sys_pll2_50m", "sys_pll2_out", 1, 20);
+ clks[IMX8MM_SYS_PLL2_100M] = imx_clk_fixed_factor("sys_pll2_100m", "sys_pll2_out", 1, 10);
+ clks[IMX8MM_SYS_PLL2_125M] = imx_clk_fixed_factor("sys_pll2_125m", "sys_pll2_out", 1, 8);
+ clks[IMX8MM_SYS_PLL2_166M] = imx_clk_fixed_factor("sys_pll2_166m", "sys_pll2_out", 1, 6);
+ clks[IMX8MM_SYS_PLL2_200M] = imx_clk_fixed_factor("sys_pll2_200m", "sys_pll2_out", 1, 5);
+ clks[IMX8MM_SYS_PLL2_250M] = imx_clk_fixed_factor("sys_pll2_250m", "sys_pll2_out", 1, 4);
+ clks[IMX8MM_SYS_PLL2_333M] = imx_clk_fixed_factor("sys_pll2_333m", "sys_pll2_out", 1, 3);
+ clks[IMX8MM_SYS_PLL2_500M] = imx_clk_fixed_factor("sys_pll2_500m", "sys_pll2_out", 1, 2);
clks[IMX8MM_SYS_PLL2_1000M] = imx_clk_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1);
/* Core Slice */
--
2.30.2
next reply other threads:[~2022-06-16 14:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-16 14:05 Marco Felsch [this message]
2022-06-16 14:05 ` [PATCH 2/2] clk: imx8mn: " Marco Felsch
2022-06-17 7:18 ` [PATCH 1/2] clk: imx8mm: " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220616140521.2263016-1-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox