From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH] scripts: imx-usb-loader: simplify code flow for file size calculations
Date: Fri, 17 Jun 2022 10:24:14 +0200 [thread overview]
Message-ID: <20220617082414.323238-1-u.kleine-koenig@pengutronix.de> (raw)
In-Reply-To: <20220617081357.GJ1615@pengutronix.de>
This change contains several changes that make the code flow easier to
understand (in my eyes at least):
- Rename max_length to firststage_len
In some cases the image is loaded in two stages: First the PBL which
is started after the PBL is loaded completely and then the whole
image. So the size of the first stage isn't about some maximum.
- Drop unintuitive total_size variable
This variable used to be 0 in the one stage case and the filesize
otherwise. Just use firststage_len for the first stage and use the
filesize for the second stage (if needed).
- Don't call the first stage size "fsize" in the debug output.
- Add offset for second stage to debug output.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
scripts/imx/imx-usb-loader.c | 37 ++++++++++++++++--------------------
1 file changed, 16 insertions(+), 21 deletions(-)
diff --git a/scripts/imx/imx-usb-loader.c b/scripts/imx/imx-usb-loader.c
index d8b284298920..4448b19b54bb 100644
--- a/scripts/imx/imx-usb-loader.c
+++ b/scripts/imx/imx-usb-loader.c
@@ -1218,7 +1218,7 @@ static int perform_dcd(unsigned char *p, const unsigned char *file_start,
}
static int get_dl_start(const unsigned char *p, const unsigned char *file_start,
- unsigned cnt, unsigned *max_length, unsigned *plugin,
+ unsigned cnt, size_t *firststage_len, unsigned *plugin,
unsigned *header_addr)
{
const unsigned char *file_end = file_start + cnt;
@@ -1233,7 +1233,7 @@ static int get_dl_start(const unsigned char *p, const unsigned char *file_start,
*header_addr = ohdr->dcd_ptr_ptr - offsetof(struct imx_flash_header, dcd);
*plugin = 0;
if (err >= 0)
- *max_length = dcd_end[0] | (dcd_end[1] << 8) | (dcd_end[2] << 16) | (dcd_end[3] << 24);
+ *firststage_len = dcd_end[0] | (dcd_end[1] << 8) | (dcd_end[2] << 16) | (dcd_end[3] << 24);
break;
}
@@ -1249,7 +1249,7 @@ static int get_dl_start(const unsigned char *p, const unsigned char *file_start,
return -1;
}
- *max_length = ((struct imx_boot_data *)bd)->size;
+ *firststage_len = ((struct imx_boot_data *)bd)->size;
*plugin = ((struct imx_boot_data *)bd)->plugin;
((struct imx_boot_data *)bd)->plugin = 0;
@@ -1276,7 +1276,7 @@ static int get_payload_start(const unsigned char *p, uint32_t *ofs)
}
static int process_header(struct usb_work *curr, unsigned char *buf, int cnt,
- unsigned *p_max_length, unsigned *p_plugin,
+ size_t *p_firststage_len, unsigned *p_plugin,
unsigned *p_header_addr)
{
int ret;
@@ -1291,7 +1291,7 @@ static int process_header(struct usb_work *curr, unsigned char *buf, int cnt,
if (!is_header(p))
continue;
- ret = get_dl_start(p, buf, cnt, p_max_length, p_plugin, p_header_addr);
+ ret = get_dl_start(p, buf, cnt, p_firststage_len, p_plugin, p_header_addr);
if (ret < 0) {
printf("!!get_dl_start returned %i\n", ret);
return ret;
@@ -1308,7 +1308,7 @@ static int process_header(struct usb_work *curr, unsigned char *buf, int cnt,
if (*p_plugin && (!curr->plug) && (!header_cnt)) {
header_cnt++;
- header_max = header_offset + *p_max_length + 0x400;
+ header_max = header_offset + *p_firststage_len + 0x400;
if (header_max > cnt - 32)
header_max = cnt - 32;
printf("header_max=%x\n", header_max);
@@ -1334,18 +1334,17 @@ static int do_irom_download(struct usb_work *curr, int verify)
unsigned char *buf = NULL;
unsigned char *image;
unsigned char *verify_buffer = NULL;
- unsigned max_length;
+ size_t firststage_len;
unsigned plugin = 0;
unsigned header_addr = 0;
- unsigned total_size = 0;
buf = read_file(curr->filename, &fsize);
if (!buf)
return -errno;
- max_length = fsize;
+ firststage_len = fsize;
- ret = process_header(curr, buf, fsize, &max_length, &plugin, &header_addr);
+ ret = process_header(curr, buf, fsize, &firststage_len, &plugin, &header_addr);
if (ret < 0)
goto cleanup;
@@ -1357,14 +1356,10 @@ static int do_irom_download(struct usb_work *curr, int verify)
goto cleanup;
}
+ /* skip over the imx-image-part */
image = buf + header_offset;
fsize -= header_offset;
- if (fsize > max_length) {
- total_size = fsize;
- fsize = max_length;
- }
-
type = FT_APP;
if (verify) {
@@ -1384,10 +1379,10 @@ static int do_irom_download(struct usb_work *curr, int verify)
}
}
- printf("loading binary file(%s) to 0x%08x, fsize=%zu type=%d...\n",
- curr->filename, header_addr, fsize, type);
+ printf("loading binary file(%s) to 0x%08x, firststage_len=%zu type=%d, hdroffset=%u...\n",
+ curr->filename, header_addr, firststage_len, type, header_offset);
- ret = load_file(image, fsize, header_addr, type, false);
+ ret = load_file(image, firststage_len, header_addr, type, false);
if (ret < 0)
goto cleanup;
@@ -1425,7 +1420,7 @@ static int do_irom_download(struct usb_work *curr, int verify)
return ret;
}
- if (total_size) {
+ if (firststage_len < fsize) {
uint32_t ofs;
ret = get_payload_start(image, &ofs);
@@ -1433,9 +1428,9 @@ static int do_irom_download(struct usb_work *curr, int verify)
printf("Cannot get offset of payload\n");
goto cleanup;
}
- printf("Loading full image\n");
+ printf("Loading full image from offset %u\n", ofs);
printf("Note: This needs board support on the other end\n");
- load_file(image + ofs, total_size - ofs, 0, 0, true);
+ load_file(image + ofs, fsize - ofs, 0, 0, true);
}
ret = 0;
base-commit: 339737fcf0a7c4be1d1984283619cb14aaee6aff
--
2.36.1
next prev parent reply other threads:[~2022-06-17 8:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-15 12:38 Uwe Kleine-König
2022-06-17 8:13 ` Sascha Hauer
2022-06-17 8:24 ` Uwe Kleine-König [this message]
2022-06-17 8:35 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220617082414.323238-1-u.kleine-koenig@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox