From: Sam Ravnborg <sam@ravnborg.org>
To: barebox@lists.infradead.org, Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH v2 07/11] ARM: at91: Add extra register definitions
Date: Tue, 28 Jun 2022 22:38:45 +0200 [thread overview]
Message-ID: <20220628203849.2785611-8-sam@ravnborg.org> (raw)
In-Reply-To: <20220628203849.2785611-1-sam@ravnborg.org>
Copied from at91bootstrap. Required in subsequent patches.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
arch/arm/mach-at91/include/mach/at91_pmc.h | 2 +
arch/arm/mach-at91/include/mach/at91sam9263.h | 14 +++
.../include/mach/at91sam9263_matrix.h | 23 +++-
arch/arm/mach-at91/include/mach/at91sam926x.h | 2 +
.../mach-at91/include/mach/at91sam9_sdramc.h | 108 +++++++++++++++++-
5 files changed, 141 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 2860ea485..c5ce0f82a 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -170,6 +170,8 @@
#define AT91_PMC_IPLLA_1 (1 << 8)
#define AT91_PMC_IPLLA_2 (2 << 8)
#define AT91_PMC_IPLLA_3 (3 << 8)
+#define AT91SAM9_PMC_ICPPLLA (1 << 0)
+#define AT91SAM9_PMC_ICPPLLB (1 << 16)
#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index 2ea9aadaf..229f8d16b 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -108,4 +108,18 @@
#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
+/*
+ * External memory
+ */
+#define AT91SAM9263_BASE_EBI0_CS0 0x10000000
+#define AT91SAM9263_BASE_EBI0_CS1 0x20000000 /* EBI0 SDRAMC */
+#define AT91SAM9263_BASE_EBI0_CS2 0x30000000
+#define AT91SAM9263_BASE_EBI0_CS3 0x40000000 /* EBI0 NANDFlash */
+#define AT91SAM9263_BASE_EBI0_CS4 0x50000000 /* Compact Flash Slot 0 */
+#define AT91SAM9263_BASE_EBI0_CS5 0x60000000 /* Compact Flash Slot 1 */
+#define AT91SAM9263_BASE_EBI1_CS0 0x70000000
+#define AT91SAM9263_BASE_EBI1_CS1 0x80000000 /* EBI1 SDRAMC */
+#define AT91SAM9263_BASE_EBI1_CS2 0x90000000 /* EBI1 NANDFlash */
+
+
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
index 2f10ce096..837cceb41 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
@@ -25,7 +25,7 @@
#define AT91SAM9263_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91SAM9263_MATRIX_ULBT_FOUR (2 << 0)
#define AT91SAM9263_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91SAM9263_MATRIX_ULBT_SIXTEEN (4 << 0)
+#define AT91SAM9263_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91SAM9263_MATRIX_SCFG0 (0x40) /* Slave Configuration Register 0 */
#define AT91SAM9263_MATRIX_SCFG1 (0x44) /* Slave Configuration Register 1 */
@@ -35,12 +35,22 @@
#define AT91SAM9263_MATRIX_SCFG5 (0x54) /* Slave Configuration Register 5 */
#define AT91SAM9263_MATRIX_SCFG6 (0x58) /* Slave Configuration Register 6 */
#define AT91SAM9263_MATRIX_SCFG7 (0x5C) /* Slave Configuration Register 7 */
-#define AT91SAM9263_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91SAM9263_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91SAM9263_MATRIX_SLOT_CYCLE_(x) (x << 0)
#define AT91SAM9263_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91SAM9263_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91SAM9263_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91SAM9263_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91SAM9263_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91SAM9263_MATRIX_FIXED_DEFMSTR_ARM926I (0x0 << 18)
+#define AT91SAM9263_MATRIX_FIXED_DEFMSTR_ARM926D (0x1 << 18)
+#define AT91SAM9263_MATRIX_FIXED_DEFMSTR_PDC (0x2 << 18)
+#define AT91SAM9263_MATRIX_FIXED_DEFMSTR_LCDC (0x3 << 18)
+#define AT91SAM9263_MATRIX_FIXED_DEFMSTR_2DGC (0x4 << 18)
+#define AT91SAM9263_MATRIX_FIXED_DEFMSTR_ISI (0x5 << 18)
+#define AT91SAM9263_MATRIX_FIXED_DEFMSTR_DMA (0x6 << 18)
+#define AT91SAM9263_MATRIX_FIXED_DEFMSTR_EMAC (0x7 << 18)
+#define AT91SAM9263_MATRIX_FIXED_DEFMSTR_USB (0x8 << 18)
#define AT91SAM9263_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91SAM9263_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91SAM9263_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
@@ -62,14 +72,23 @@
#define AT91SAM9263_MATRIX_PRAS7 (0xB8) /* Priority Register A for Slave 7 */
#define AT91SAM9263_MATRIX_PRBS7 (0xBC) /* Priority Register B for Slave 7 */
#define AT91SAM9263_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91SAM9263_MATRIX_M0PR_(x) (x << 0) /* ARM926EJ-S Instruction priority */
#define AT91SAM9263_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91SAM9263_MATRIX_M1PR_(x) (x << 4) /* ARM926EJ-S Data priority */
#define AT91SAM9263_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91SAM9263_MATRIX_M2PR_(x) (x << 8) /* PDC priority */
#define AT91SAM9263_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91SAM9263_MATRIX_M3PR_(x) (x << 12) /* LCDC priority */
#define AT91SAM9263_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91SAM9263_MATRIX_M4PR_(x) (x << 16) /* 2DGC priority */
#define AT91SAM9263_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91SAM9263_MATRIX_M5PR_(x) (x << 20) /* ISI priority */
#define AT91SAM9263_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91SAM9263_MATRIX_M6PR_(x) (x << 24) /* DMA priority */
#define AT91SAM9263_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91SAM9263_MATRIX_M7PR_(x) (x << 28) /* EMAC priority */
#define AT91SAM9263_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+#define AT91SAM9263_MATRIX_M8PR_(x) (x << 0) /* USB Priority */
#define AT91SAM9263_MATRIX_MRCR (0x100) /* Master Remap Control Register */
#define AT91SAM9263_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
diff --git a/arch/arm/mach-at91/include/mach/at91sam926x.h b/arch/arm/mach-at91/include/mach/at91sam926x.h
index 8ef83010d..ae7e224a7 100644
--- a/arch/arm/mach-at91/include/mach/at91sam926x.h
+++ b/arch/arm/mach-at91/include/mach/at91sam926x.h
@@ -7,4 +7,6 @@
#define AT91SAM926X_BASE_RSTC 0xfffffd00
#define AT91SAM926X_BASE_WDT 0xfffffd40
+#define AT91SAM926X_ID_SYS 1 /* System Controller Interrupt */
+
#endif /* __MACH_AT91SAM926X_H */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index c5271af82..0e05387aa 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -47,12 +47,108 @@
#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
#define AT91_SDRAMC_DBW_32 (0 << 7)
#define AT91_SDRAMC_DBW_16 (1 << 7)
-#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
-#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
-#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
-#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
-#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
-#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
+#define AT91_SDRAMC_TWR (0xF << 8) /* Number of Write Recovery Time Cycles */
+#define AT91_SDRAMC_TWR_0 (0x0 << 8)
+#define AT91_SDRAMC_TWR_1 (0x1 << 8)
+#define AT91_SDRAMC_TWR_2 (0x2 << 8)
+#define AT91_SDRAMC_TWR_3 (0x3 << 8)
+#define AT91_SDRAMC_TWR_4 (0x4 << 8)
+#define AT91_SDRAMC_TWR_5 (0x5 << 8)
+#define AT91_SDRAMC_TWR_6 (0x6 << 8)
+#define AT91_SDRAMC_TWR_7 (0x7 << 8)
+#define AT91_SDRAMC_TWR_8 (0x8 << 8)
+#define AT91_SDRAMC_TWR_9 (0x9 << 8)
+#define AT91_SDRAMC_TWR_10 (0xA << 8)
+#define AT91_SDRAMC_TWR_11 (0xB << 8)
+#define AT91_SDRAMC_TWR_12 (0xC << 8)
+#define AT91_SDRAMC_TWR_13 (0xD << 8)
+#define AT91_SDRAMC_TWR_14 (0xE << 8)
+#define AT91_SDRAMC_TWR_15 (0xF << 8)
+#define AT91_SDRAMC_TRC (0xF << 12) /* Number of Row Cycle Delay Time Cycles */
+#define AT91_SDRAMC_TRC_0 (0x0 << 12)
+#define AT91_SDRAMC_TRC_1 (0x1 << 12)
+#define AT91_SDRAMC_TRC_2 (0x2 << 12)
+#define AT91_SDRAMC_TRC_3 (0x3 << 12)
+#define AT91_SDRAMC_TRC_4 (0x4 << 12)
+#define AT91_SDRAMC_TRC_5 (0x5 << 12)
+#define AT91_SDRAMC_TRC_6 (0x6 << 12)
+#define AT91_SDRAMC_TRC_7 (0x7 << 12)
+#define AT91_SDRAMC_TRC_8 (0x8 << 12)
+#define AT91_SDRAMC_TRC_9 (0x9 << 12)
+#define AT91_SDRAMC_TRC_10 (0xA << 12)
+#define AT91_SDRAMC_TRC_11 (0xB << 12)
+#define AT91_SDRAMC_TRC_12 (0xC << 12)
+#define AT91_SDRAMC_TRC_13 (0xD << 12)
+#define AT91_SDRAMC_TRC_14 (0xE << 12)
+#define AT91_SDRAMC_TRC_15 (0xF << 12)
+#define AT91_SDRAMC_TRP (0xF << 16) /* Number of Row Precharge Delay Time Cycles */
+#define AT91_SDRAMC_TRP_0 (0x0 << 16)
+#define AT91_SDRAMC_TRP_1 (0x1 << 16)
+#define AT91_SDRAMC_TRP_2 (0x2 << 16)
+#define AT91_SDRAMC_TRP_3 (0x3 << 16)
+#define AT91_SDRAMC_TRP_4 (0x4 << 16)
+#define AT91_SDRAMC_TRP_5 (0x5 << 16)
+#define AT91_SDRAMC_TRP_6 (0x6 << 16)
+#define AT91_SDRAMC_TRP_7 (0x7 << 16)
+#define AT91_SDRAMC_TRP_8 (0x8 << 16)
+#define AT91_SDRAMC_TRP_9 (0x9 << 16)
+#define AT91_SDRAMC_TRP_10 (0xA << 16)
+#define AT91_SDRAMC_TRP_11 (0xB << 16)
+#define AT91_SDRAMC_TRP_12 (0xC << 16)
+#define AT91_SDRAMC_TRP_13 (0xD << 16)
+#define AT91_SDRAMC_TRP_14 (0xE << 16)
+#define AT91_SDRAMC_TRP_15 (0xF << 16)
+#define AT91_SDRAMC_TRCD (0xF << 20) /* Number of Row to Column Delay Time Cycles */
+#define AT91_SDRAMC_TRCD_0 (0x0 << 20)
+#define AT91_SDRAMC_TRCD_1 (0x1 << 20)
+#define AT91_SDRAMC_TRCD_2 (0x2 << 20)
+#define AT91_SDRAMC_TRCD_3 (0x3 << 20)
+#define AT91_SDRAMC_TRCD_4 (0x4 << 20)
+#define AT91_SDRAMC_TRCD_5 (0x5 << 20)
+#define AT91_SDRAMC_TRCD_6 (0x6 << 20)
+#define AT91_SDRAMC_TRCD_7 (0x7 << 20)
+#define AT91_SDRAMC_TRCD_8 (0x8 << 20)
+#define AT91_SDRAMC_TRCD_9 (0x9 << 20)
+#define AT91_SDRAMC_TRCD_10 (0xA << 20)
+#define AT91_SDRAMC_TRCD_11 (0xB << 20)
+#define AT91_SDRAMC_TRCD_12 (0xC << 20)
+#define AT91_SDRAMC_TRCD_13 (0xD << 20)
+#define AT91_SDRAMC_TRCD_14 (0xE << 20)
+#define AT91_SDRAMC_TRCD_15 (0xF << 20)
+#define AT91_SDRAMC_TRAS (0xF << 24) /* Number of Active to Precharge Delay Time Cycles */
+#define AT91_SDRAMC_TRAS_0 (0x0 << 24)
+#define AT91_SDRAMC_TRAS_1 (0x1 << 24)
+#define AT91_SDRAMC_TRAS_2 (0x2 << 24)
+#define AT91_SDRAMC_TRAS_3 (0x3 << 24)
+#define AT91_SDRAMC_TRAS_4 (0x4 << 24)
+#define AT91_SDRAMC_TRAS_5 (0x5 << 24)
+#define AT91_SDRAMC_TRAS_6 (0x6 << 24)
+#define AT91_SDRAMC_TRAS_7 (0x7 << 24)
+#define AT91_SDRAMC_TRAS_8 (0x8 << 24)
+#define AT91_SDRAMC_TRAS_9 (0x9 << 24)
+#define AT91_SDRAMC_TRAS_10 (0xA << 24)
+#define AT91_SDRAMC_TRAS_11 (0xB << 24)
+#define AT91_SDRAMC_TRAS_12 (0xC << 24)
+#define AT91_SDRAMC_TRAS_13 (0xD << 24)
+#define AT91_SDRAMC_TRAS_14 (0xE << 24)
+#define AT91_SDRAMC_TRAS_15 (0xF << 24)
+#define AT91_SDRAMC_TXS (0xF << 28) /* Number of Exit Self Refresh to Active Delay Time Cycles */
+#define AT91_SDRAMC_TXSR_0 (0x0 << 28)
+#define AT91_SDRAMC_TXSR_1 (0x1 << 28)
+#define AT91_SDRAMC_TXSR_2 (0x2 << 28)
+#define AT91_SDRAMC_TXSR_3 (0x3 << 28)
+#define AT91_SDRAMC_TXSR_4 (0x4 << 28)
+#define AT91_SDRAMC_TXSR_5 (0x5 << 28)
+#define AT91_SDRAMC_TXSR_6 (0x6 << 28)
+#define AT91_SDRAMC_TXSR_7 (0x7 << 28)
+#define AT91_SDRAMC_TXSR_8 (0x8 << 28)
+#define AT91_SDRAMC_TXSR_9 (0x9 << 28)
+#define AT91_SDRAMC_TXSR_10 (0xA << 28)
+#define AT91_SDRAMC_TXSR_11 (0xB << 28)
+#define AT91_SDRAMC_TXSR_12 (0xC << 28)
+#define AT91_SDRAMC_TXSR_13 (0xD << 28)
+#define AT91_SDRAMC_TXSR_14 (0xE << 28)
+#define AT91_SDRAMC_TXSR_15 (0xF << 28)
#define AT91_SDRAMC_LPR 0x10 /* SDRAM Controller Low Power Register */
#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
--
2.34.1
next prev parent reply other threads:[~2022-06-28 20:40 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-28 20:38 [PATCH 0/11] ARM: at91: Add pbl support to skov-arm9cpu Sam Ravnborg
2022-06-28 20:38 ` [PATCH v2 01/11] pwm: atmel: Fix build and update Sam Ravnborg
2022-06-28 20:38 ` [PATCH v2 02/11] ARM: at91: Make sdramc.h useable in multi image builds Sam Ravnborg
2022-06-29 6:50 ` Ahmad Fatoum
2022-06-28 20:38 ` [PATCH v2 03/11] ARM: at91: Add initialize function to sdramc Sam Ravnborg
2022-06-29 6:50 ` Ahmad Fatoum
2022-06-28 20:38 ` [PATCH v2 04/11] ARM: at91: Provide at91_mux_pio_pin for use in lowlevel Sam Ravnborg
2022-06-29 6:50 ` Ahmad Fatoum
2022-06-28 20:38 ` [PATCH v2 05/11] mci: atmel_mci: Add PBL helper to configure highcapacity Sam Ravnborg
2022-06-29 6:50 ` Ahmad Fatoum
2022-06-28 20:38 ` [PATCH v2 06/11] ARM: at91: Add at91sam9 xload_mmc for PBL use Sam Ravnborg
2022-06-29 6:50 ` Ahmad Fatoum
2022-06-28 20:38 ` Sam Ravnborg [this message]
2022-06-29 6:49 ` [PATCH v2 07/11] ARM: at91: Add extra register definitions Ahmad Fatoum
2022-06-28 20:38 ` [PATCH v2 08/11] ARM: at91: Add lowlevel helpers for at91sam9263 Sam Ravnborg
2022-06-29 6:50 ` Ahmad Fatoum
2022-06-28 20:38 ` [WIP PATCH v2 09/11] atmel_lcdfb: add support for updated DT bindings Sam Ravnborg
2022-06-28 20:38 ` [PATCH v2 10/11] ARM: at91: Add xload support to skov-arm9cpu Sam Ravnborg
2022-06-28 20:47 ` Sam Ravnborg
2022-06-28 20:38 ` [WIP PATCH v2 11/11] ARM: at91: Update DTS for skov-arm9cpu Sam Ravnborg
2022-06-30 12:19 ` [PATCH 0/11] ARM: at91: Add pbl support to skov-arm9cpu Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220628203849.2785611-8-sam@ravnborg.org \
--to=sam@ravnborg.org \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox