From: Marco Felsch <m.felsch@pengutronix.de>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2] ARM: i.MX8MP: adapt atf bl31 base addr
Date: Mon, 4 Jul 2022 17:01:18 +0200 [thread overview]
Message-ID: <20220704150118.74ljreij2w5iwfun@pengutronix.de> (raw)
In-Reply-To: <322469f9cbc5b7008001330354b19a0f1ff2c1cd.camel@pengutronix.de>
On 22-07-04, Lucas Stach wrote:
> Am Montag, dem 04.07.2022 um 16:27 +0200 schrieb Marco Felsch:
> > The usptream TF-A was shifting around the base address from version to
> > version. But finally with upstream TF-A v2.7 it is correctly set to
> > 0x970000. This change was done since the first official silicon has an
> > SRAM size of 576KB where as the tapeout version A1 (pre-silicion) had
> > only 512KB.
>
> Now this doesn't match the commit message in the TF-A, which claims
> that tapeout A0 (pre-release silicon) had 512K SRAM, while it was
> extended to 576KB in the A1 tapeout, which is the current mass produced
> version.
Arg.. sry. I got your prev. comment wrong. Should have checked the tf-a
log twice. Sorry for the noise.
> >
> > The upstream TF-A has adapt it in verion v2.5 so the BL31 blob is at the
> ^ adapted ^version
> > end of the SRAM. Unfortunately they had (accidental) reverted back to
>
> Who is they? "Unfortunately it was reverted back..."
The TF-A developers which are by name:
- Ying-Chun Liu (PaulLiu)
- Peng Fan
- Jacky Bai
But yes, I will drop they.
> > 0x960000 in v2.6. They noticed that and changed (again) back to 0x970000.
> > with v2.7.
> >
> > This commit also adapts the documentation for the i.MX8MP-EVK to
> > reference the upstream TF-A. The new warning should point out that we
> > strongly recommended to use versions from v2.7 onwards, due to the
> ^ recommend
Yes.
> > version mess explained above.
> >
> > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > ---
> > Changelog:
> >
> > v2:
> > - fix commit message ger/eng mixup and mention tapeout version A1
> >
> > Documentation/boards/imx/nxp-imx8mp-evk.rst | 11 +++++++----
> > arch/arm/mach-imx/include/mach/atf.h | 2 +-
> > 2 files changed, 8 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/boards/imx/nxp-imx8mp-evk.rst b/Documentation/boards/imx/nxp-imx8mp-evk.rst
> > index 366c1de500..1074992f2f 100644
> > --- a/Documentation/boards/imx/nxp-imx8mp-evk.rst
> > +++ b/Documentation/boards/imx/nxp-imx8mp-evk.rst
> > @@ -40,15 +40,18 @@ As a last step of this process those files need to be placed in
> > firmware/${f}; \
> > done
> >
> > -Get and Build the ARM Trusted firmware
> > ---------------------------------------
> > +Get and Build the Trusted Firmware A
> > +------------------------------------
> >
> > -Get ATF from https://source.codeaurora.org/external/imx/imx-atf, branch
> > -imx_5.4.3_2.0.0::
> > +Get TF-A from https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/ and
> > +checkout version v2.7::
> >
> > make PLAT=imx8mp bl31
> > cp build/imx8mp/release/bl31.bin ${barebox_srctree}/imx8mp-bl31.bin
> >
> > +.. warning:: It is important to use a version >= v2.7 else your system
> > + might not boot.
>
> This doesn't tell anyone what's going on, I think we can bother the
> reader with the details: "It is important to use a version >= v2.7, as
> Barebox expects the BL31 SRAM load address used from this release
> onwards."
>
> > +
> > Build Barebox
> > -------------
> >
> > diff --git a/arch/arm/mach-imx/include/mach/atf.h b/arch/arm/mach-imx/include/mach/atf.h
> > index 09396f4646..bc400ddbad 100644
> > --- a/arch/arm/mach-imx/include/mach/atf.h
> > +++ b/arch/arm/mach-imx/include/mach/atf.h
> > @@ -10,7 +10,7 @@
> >
> > #define MX8MM_ATF_BL31_BASE_ADDR 0x00920000
> > #define MX8MN_ATF_BL31_BASE_ADDR 0x00960000
> > -#define MX8MP_ATF_BL31_BASE_ADDR 0x00960000
> > +#define MX8MP_ATF_BL31_BASE_ADDR 0x00970000
> > #define MX8MQ_ATF_BL31_BASE_ADDR 0x00910000
> > #define MX8M_ATF_BL33_BASE_ADDR 0x40200000
> > #define MX8MM_ATF_BL33_BASE_ADDR MX8M_ATF_BL33_BASE_ADDR
>
>
>
prev parent reply other threads:[~2022-07-04 15:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-04 14:27 Marco Felsch
2022-07-04 14:55 ` Lucas Stach
2022-07-04 15:01 ` Marco Felsch [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220704150118.74ljreij2w5iwfun@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=l.stach@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox