From: Antony Pavlov <antonynpavlov@gmail.com>
To: Ahmad Fatoum <ahmad@a3f.at>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 2/2] RISC-V: sifive: enable SPI Flash and SD in config
Date: Mon, 22 Aug 2022 14:32:42 +0300 [thread overview]
Message-ID: <20220822143242.a7937c979f582c4989303380@gmail.com> (raw)
In-Reply-To: <20220426064604.422292-2-ahmad@a3f.at>
On Tue, 26 Apr 2022 08:46:04 +0200
Ahmad Fatoum <ahmad@a3f.at> wrote:
Hi Ahmad!
I'm trying to run SiFive target with emulate.pl, e.g.
barebox$ dd if=/dev/zero of=/tmp/1M count=1 bs=1M
barebox$ ./test/emulate.pl sifive_defconfig -- -drive file=/tmp/1M,if=sd
...
qemu-system-riscv64: -drive file=/tmp/1M,if=sd: machine type does not support if=sd,bus=0,unit=0
Error running emulator: 256
I use QEMU emulator version 5.2.0 (Debian 1:5.2+dfsg-11+deb11u2), please see https://gitlab.com/frantony/barebox-gitlab-ci-runner .
If I skip the '-drive file=/tmp/1M,if=sd' qemu option then I see "Load access fault", e.g.
barebox$ ./test/emulate.pl sifive_defconfig
...
barebox 2022.08.0-00162-g7fce4ae853b0 #1 @1661158478
Board: SiFive HiFive Unleashed A00
Unhandled exception: 5 "Load access fault"
E [<0000000087e224fc>] ra: [<0000000087e224f0>] tval: 0000000010040014
sp: 0000000087fffd70 gp: 0000000000000000 tp: 0000000000000001
t0: 0000000083f16cf0 t1: 0000000000000002 t2: ffffffffffffffff
s0: 0000000083f16c78 s1: 0000000087eaf590 a0: 0000000003f940aa
a1: 0000000083f0fee0 a2: 0000000000000001 a3: 0000000083f0f3d8
a4: 0000000000000002 a5: 0000000010040000 a6: 0000000000000001
a7: 0000000000ff0000 s2: 0000000083f0fee0 s3: ffffffffffffffff
s4: fffffffffffff000 s5: 0000000000000008 s6: 0000000080201ca0
s7: 0000000000000001 s8: 00000000000db4f8 s9: 0000000087fe0000
s10: 0000000000000000 s11: 0000000000000000 t3: 0000000000000048
t4: 0000000000000000 t5: 0000000000000000 t6: fffffffffffffffd
### ERROR ### Please RESET the board ###
If I revert the 'RISC-V: sifive: enable SPI Flash and SD in config' commit then './test/emulate.pl sifive_defconfig' runs successfully.
> To test SD-Card:
>
> ./test/emulate.pl sifive_defconfig -- -drive file=image.sdcard,if=sd
>
> Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
> ---
> v1 -> v2:
> - No change
> ---
> arch/riscv/configs/sifive_defconfig | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/arch/riscv/configs/sifive_defconfig b/arch/riscv/configs/sifive_defconfig
> index 59cfebf194df..6ebe6eaf3785 100644
> --- a/arch/riscv/configs/sifive_defconfig
> +++ b/arch/riscv/configs/sifive_defconfig
> @@ -13,13 +13,10 @@ CONFIG_HUSH_FANCY_PROMPT=y
> CONFIG_CMDLINE_EDITING=y
> CONFIG_AUTO_COMPLETE=y
> CONFIG_MENU=y
> -CONFIG_IMD_TARGET=y
> CONFIG_CONSOLE_ALLOW_COLOR=y
> CONFIG_PBL_CONSOLE=y
> CONFIG_PARTITION_DISK_EFI=y
> CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> -CONFIG_BAREBOXENV_TARGET=y
> -CONFIG_BAREBOXCRC32_TARGET=y
> CONFIG_STATE=y
> CONFIG_STATE_CRYPTO=y
> CONFIG_BOOTCHOOSER=y
> @@ -85,20 +82,21 @@ CONFIG_VIRTIO_CONSOLE=y
> CONFIG_SERIAL_SIFIVE=y
> CONFIG_DRIVER_NET_MACB=y
> CONFIG_DRIVER_SPI_GPIO=y
> +CONFIG_SPI_SIFIVE=y
> CONFIG_I2C=y
> CONFIG_I2C_GPIO=y
> CONFIG_MTD=y
> -# CONFIG_MTD_OOB_DEVICE is not set
> +CONFIG_MTD_RAW_DEVICE=y
> CONFIG_MTD_CONCAT=y
> CONFIG_MTD_M25P80=y
> CONFIG_DRIVER_CFI=y
> CONFIG_DRIVER_CFI_BANK_WIDTH_8=y
> -CONFIG_DISK=y
> -CONFIG_DISK_WRITE=y
> CONFIG_VIRTIO_BLK=y
> CONFIG_VIDEO=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_DRIVER_VIDEO_SIMPLEFB_CLIENT=y
> +CONFIG_MCI=y
> +CONFIG_MCI_SPI=y
> CONFIG_CLOCKSOURCE_DUMMY_RATE=60000
> CONFIG_EEPROM_AT24=y
> CONFIG_HWRNG=y
> @@ -126,3 +124,6 @@ CONFIG_ZSTD_DECOMPRESS=y
> CONFIG_XZ_DECOMPRESS=y
> CONFIG_BASE64=y
> CONFIG_DIGEST_CRC32_GENERIC=y
> +CONFIG_IMD_TARGET=y
> +CONFIG_BAREBOXENV_TARGET=y
> +CONFIG_BAREBOXCRC32_TARGET=y
> --
> 2.34.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
Best regards,
Antony Pavlov
next prev parent reply other threads:[~2022-08-22 11:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-26 6:46 [PATCH v2 1/2] spi: Port SiFive SPI controller driver Ahmad Fatoum
2022-04-26 6:46 ` [PATCH v2 2/2] RISC-V: sifive: enable SPI Flash and SD in config Ahmad Fatoum
2022-08-22 11:32 ` Antony Pavlov [this message]
2022-08-23 5:18 ` Ahmad Fatoum
2022-08-23 14:35 ` Antony Pavlov
2022-08-30 11:05 ` Antony Pavlov
2022-04-29 7:08 ` [PATCH v2 1/2] spi: Port SiFive SPI controller driver Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220822143242.a7937c979f582c4989303380@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=ahmad@a3f.at \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox