mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
To: barebox@lists.infradead.org
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Subject: [PATCH v4 08/21] tftp: remove sanity check of first block
Date: Tue, 30 Aug 2022 09:38:03 +0200	[thread overview]
Message-ID: <20220830073816.2694734-9-enrico.scholz@sigma-chemnitz.de> (raw)
In-Reply-To: <20220830073816.2694734-1-enrico.scholz@sigma-chemnitz.de>

With tftp window size support in the next patches, the first received
block might be !=1 (e.g. when it was reordered or dropped).  There could
be checked whether it is in the first window, but the corresponding
sanity check can be dropped completely:

- OACK logic verifies that we speak with a tftp server (which always
  sends block #1 as the first one).  Diagnostic will help only with non
  rfc 2743 servers (which are probably very rare resp. non existing
  nowadays)

- the code some lines later handles this case already

Remove the check and simplify things.

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
---
 fs/tftp.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/fs/tftp.c b/fs/tftp.c
index 264841f24407..51cb1109d2ff 100644
--- a/fs/tftp.c
+++ b/fs/tftp.c
@@ -321,14 +321,6 @@ static void tftp_recv(struct file_priv *priv,
 			priv->state = STATE_RDATA;
 			priv->tftp_con->udp->uh_dport = uh_sport;
 			priv->last_block = 0;
-
-			if (priv->block != 1) {	/* Assertion */
-				pr_err("error: First block is not block 1 (%d)\n",
-					priv->block);
-				priv->err = -EINVAL;
-				priv->state = STATE_DONE;
-				break;
-			}
 		}
 
 		if (priv->block == priv->last_block)
-- 
2.37.2




  parent reply	other threads:[~2022-08-30  7:42 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-30  7:37 [PATCH v4 00/21] add "windowsize" (RFC 7440) support for tftp Enrico Scholz
2022-08-30  7:37 ` [PATCH v4 01/21] tftp: add some 'const' annotations Enrico Scholz
2022-08-30  7:37 ` [PATCH v4 02/21] tftp: allow to change tftp port Enrico Scholz
2022-08-30  7:37 ` [PATCH v4 03/21] cmd:tftp: add '-P' option to set tftp server port number Enrico Scholz
2022-08-30  7:37 ` [PATCH v4 04/21] tftp: do not set 'tsize' in WRQ requests Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 05/21] tftp: assign 'priv->block' later in WRQ Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 06/21] tftp: minor refactoring of RRQ/WRQ packet generation code Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 07/21] tftp: replace hardcoded blksize by global constant Enrico Scholz
2022-08-30  7:38 ` Enrico Scholz [this message]
2022-08-30  7:38 ` [PATCH v4 09/21] tftp: add debug_assert() macro Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 10/21] tftp: allocate buffers and fifo dynamically Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 11/21] tftp: add sanity check for OACK response Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 12/21] tftp: record whether tftp file is opened for lookup operation only Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 13/21] tftp: reduce block size on lookup requests Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 14/21] tftp: refactor data processing Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 15/21] tftp: detect out-of-memory situations Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 16/21] tftp: implement 'windowsize' (RFC 7440) support Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 17/21] tftp: do not use 'priv->block' for RRQ Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 18/21] tftp: reorder tftp packets Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 19/21] tftp: add selftest Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 20/21] tftp: accept OACK + DATA datagrams only in certain states Enrico Scholz
2022-08-30  7:38 ` [PATCH v4 21/21] tftp: add some documentation about windowsize support Enrico Scholz
2022-08-31  6:40 ` [PATCH v4 00/21] add "windowsize" (RFC 7440) support for tftp Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220830073816.2694734-9-enrico.scholz@sigma-chemnitz.de \
    --to=enrico.scholz@sigma-chemnitz.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox