mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Johannes Zink <j.zink@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>,
	Johannes Zink <j.zink@pengutronix.de>
Subject: [PATCH] clks: imx7: fix initial clock setup with deep probe enabled
Date: Tue, 30 Aug 2022 10:39:37 +0200	[thread overview]
Message-ID: <20220830083937.466171-1-j.zink@pengutronix.de> (raw)

We register the i.MX7 clock controller driver at core_initcall level and
then do some initial clock setup/reparenting at postcore_initcall level.
This doesn't work as expected when deep probe is enabled, because while
the driver is registered at core_initcall level, it's only probed
later on, currently at postcore_initcall level because it's a dependency
of the timer for which of_ensure_device_probed is called.

As the initial clock setup is also at postcore_initcall level, it's no
longer guaranteed that the code executes in the same order. Fix this by
directly doing the setup at the end of the probe function.

Co-developed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
---
 drivers/clk/imx/clk-imx7.c | 62 +++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 35 deletions(-)

diff --git a/drivers/clk/imx/clk-imx7.c b/drivers/clk/imx/clk-imx7.c
index ffa39d17b0..67876a8404 100644
--- a/drivers/clk/imx/clk-imx7.c
+++ b/drivers/clk/imx/clk-imx7.c
@@ -358,7 +358,32 @@ static int const clks_init_on[] __initconst = {
 
 static struct clk_onecell_data clk_data;
 
-static int imx7_clk_initialized;
+static void imx7_clk_setup(void)
+{
+	int i;
+
+	clks[IMX7D_OSC_24M_CLK] = clk_lookup("osc");
+
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_enable(clks[clks_init_on[i]]);
+
+	/* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */
+	clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
+
+	/* set uart module clock's parent clock source that must be great then 80MHz */
+	clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
+
+	clk_set_parent(clks[IMX7D_ENET1_REF_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_125M_CLK]);
+	clk_set_parent(clks[IMX7D_ENET1_TIME_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_100M_CLK]);
+	clk_set_parent(clks[IMX7D_ENET2_REF_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_125M_CLK]);
+	clk_set_parent(clks[IMX7D_ENET2_TIME_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_100M_CLK]);
+
+	clk_set_rate(clks[IMX7D_PLL_SYS_PFD4_CLK], 392000000);
+	clk_set_parent(clks[IMX7D_ENET_AXI_ROOT_SRC], clks[IMX7D_PLL_SYS_PFD4_CLK]);
+	clk_set_rate(clks[IMX7D_ENET_AXI_ROOT_CLK], 197000000);
+	clk_set_rate(clks[IMX7D_ENET1_TIME_ROOT_CLK], 25000000);
+	clk_set_rate(clks[IMX7D_ENET2_TIME_ROOT_CLK], 25000000);
+}
 
 static int imx7_ccm_probe(struct device_d *dev)
 {
@@ -806,43 +831,10 @@ static int imx7_ccm_probe(struct device_d *dev)
 	clk_data.clk_num = ARRAY_SIZE(clks);
 	of_clk_add_provider(dev->device_node, of_clk_src_onecell_get, &clk_data);
 
-	imx7_clk_initialized = 1;
-
-	return 0;
-}
-
-static int imx7_clk_setup(void)
-{
-	int i;
-
-	if (!imx7_clk_initialized)
-		return 0;
-
-	clks[IMX7D_OSC_24M_CLK] = clk_lookup("osc");
-
-	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
-		clk_enable(clks[clks_init_on[i]]);
-
-	/* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */
-	clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
-
-	/* set uart module clock's parent clock source that must be great then 80MHz */
-	clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
-
-	clk_set_parent(clks[IMX7D_ENET1_REF_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_125M_CLK]);
-	clk_set_parent(clks[IMX7D_ENET1_TIME_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_100M_CLK]);
-	clk_set_parent(clks[IMX7D_ENET2_REF_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_125M_CLK]);
-	clk_set_parent(clks[IMX7D_ENET2_TIME_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_100M_CLK]);
-
-	clk_set_rate(clks[IMX7D_PLL_SYS_PFD4_CLK], 392000000);
-	clk_set_parent(clks[IMX7D_ENET_AXI_ROOT_SRC], clks[IMX7D_PLL_SYS_PFD4_CLK]);
-	clk_set_rate(clks[IMX7D_ENET_AXI_ROOT_CLK], 197000000);
-	clk_set_rate(clks[IMX7D_ENET1_TIME_ROOT_CLK], 25000000);
-	clk_set_rate(clks[IMX7D_ENET2_TIME_ROOT_CLK], 25000000);
+	imx7_clk_setup();
 
 	return 0;
 }
-postcore_initcall(imx7_clk_setup);
 
 static __maybe_unused struct of_device_id imx7_ccm_dt_ids[] = {
 	{
-- 
2.30.2




             reply	other threads:[~2022-08-30  8:41 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-30  8:39 Johannes Zink [this message]
2022-08-30 15:05 ` Sascha Hauer
2022-08-31  8:21   ` Johannes Zink
2022-09-02 14:02     ` Ahmad Fatoum
2022-09-02 18:38       ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220830083937.466171-1-j.zink@pengutronix.de \
    --to=j.zink@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox