From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 1/6] soc: imx: gpcv2: switch to regmap
Date: Wed, 31 Aug 2022 14:52:43 +0200 [thread overview]
Message-ID: <20220831125248.2105893-2-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20220831125248.2105893-1-s.hauer@pengutronix.de>
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
The Kernel driver uses regmap, so switch to regmap as well to get the
code closer to the kernel code.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/soc/imx/gpcv2.c | 55 ++++++++++++++++++++++++-----------------
1 file changed, 32 insertions(+), 23 deletions(-)
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index a0e78ce55e..4e2a687634 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -10,12 +10,14 @@
#include <of_device.h>
#include <common.h>
+#include <regmap.h>
#include <clock.h>
#include <abort.h>
#include <malloc.h>
#include <io.h>
#include <init.h>
#include <linux/iopoll.h>
+#include <linux/sizes.h>
#include <pm_domain.h>
#include <regulator.h>
@@ -102,7 +104,7 @@
struct imx_pgc_domain {
struct generic_pm_domain genpd;
- void __iomem *base;
+ struct regmap *regmap;
struct regulator *regulator;
unsigned int pgc;
@@ -131,12 +133,11 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
GPC_PU_PGC_SW_PUP_REQ : GPC_PU_PGC_SW_PDN_REQ;
const bool enable_power_control = !on;
const bool has_regulator = !IS_ERR(domain->regulator);
+ u32 reg_val;
int ret = 0;
- unsigned int mapping, ctrl = 0, pxx;
- mapping = readl(domain->base + GPC_PGC_CPU_MAPPING);
- mapping |= domain->bits.map;
- writel(mapping, domain->base + GPC_PGC_CPU_MAPPING);
+ regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+ domain->bits.map, domain->bits.map);
if (has_regulator && on) {
ret = regulator_enable(domain->regulator);
@@ -147,21 +148,21 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
}
if (enable_power_control) {
- ctrl = readl(domain->base + GPC_PGC_CTRL(domain->pgc));
- ctrl |= GPC_PGC_CTRL_PCR;
- writel(ctrl, domain->base + GPC_PGC_CTRL(domain->pgc));
+ regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+ GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
}
- pxx = readl(domain->base + offset);
- pxx |= domain->bits.pxx;
- writel(pxx, domain->base + offset);
+ regmap_update_bits(domain->regmap, offset,
+ domain->bits.pxx, domain->bits.pxx);
/*
* As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
* for PUP_REQ/PDN_REQ bit to be cleared
*/
- ret = readl_poll_timeout(domain->base + offset, pxx,
- !(pxx & domain->bits.pxx), MSECOND);
+ ret = regmap_read_poll_timeout(domain->regmap,
+ offset, reg_val,
+ !(reg_val & domain->bits.pxx),
+ MSECOND);
if (ret < 0) {
dev_err(domain->dev, "falied to command PGC\n");
/*
@@ -175,8 +176,8 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
}
if (enable_power_control) {
- ctrl &= ~GPC_PGC_CTRL_PCR;
- writel(ctrl, domain->base + GPC_PGC_CTRL(domain->pgc));
+ regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+ GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
}
if (has_regulator && !on) {
@@ -190,8 +191,8 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
ret = ret ?: err;
}
unmap:
- mapping &= ~domain->bits.map;
- writel(mapping, domain->base + GPC_PGC_CPU_MAPPING);
+ regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+ domain->bits.map, 0);
return ret;
}
@@ -425,10 +426,18 @@ coredevice_platform_driver(imx_pgc_domain_driver);
static int imx_gpcv2_probe(struct device_d *dev)
{
- static const struct imx_pgc_domain_data *domain_data;
+ const struct imx_pgc_domain_data *domain_data =
+ of_device_get_match_data(dev);
+
+ struct regmap_config regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = SZ_4K,
+ };
struct device_node *pgc_np, *np;
struct resource *res;
- void __iomem *base;
+ struct regmap *regmap;
int ret, pass = 0;
pgc_np = of_get_child_by_name(dev->device_node, "pgc");
@@ -441,9 +450,9 @@ static int imx_gpcv2_probe(struct device_d *dev)
if (IS_ERR(res))
return PTR_ERR(res);
- base = IOMEM(res->start);
-
- domain_data = of_device_get_match_data(dev);
+ regmap = regmap_init_mmio(dev, IOMEM(res->start), ®map_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap), "failed to init regmap\n");
/*
* Run two passes for the registration of the PGC domain platform
@@ -477,7 +486,7 @@ again:
domain = xmemdup(&domain_data->domains[domain_index],
sizeof(domain_data->domains[domain_index]));
- domain->base = base;
+ domain->regmap = regmap;
domain->genpd.power_on = imx_gpc_pu_pgc_sw_pup_req;
domain->genpd.power_off = imx_gpc_pu_pgc_sw_pdn_req;
--
2.30.2
next prev parent reply other threads:[~2022-08-31 12:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-31 12:52 [PATCH 0/6] Add power domain support for i.MX8MM, i.MX8MN and i.MX8MP Sascha Hauer
2022-08-31 12:52 ` Sascha Hauer [this message]
2022-08-31 12:52 ` [PATCH 2/6] soc: imx: gpcv2: split power_up/power_off Sascha Hauer
2022-08-31 12:52 ` [PATCH 3/6] soc: imx: gpcv2: align with upstream Linux driver Sascha Hauer
2022-08-31 12:52 ` [PATCH 4/6] soc: imx: gpcv2: extend for i.MX8M Mini/Nano/Plus support Sascha Hauer
2022-08-31 12:52 ` [PATCH 5/6] Revert "ARM: i.MX8MM: assume USBOTG power domains to be powered" Sascha Hauer
2022-08-31 18:27 ` Ahmad Fatoum
2022-08-31 12:52 ` [PATCH 6/6] Revert "ARM: i.MX8MN: " Sascha Hauer
2022-08-31 18:28 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220831125248.2105893-2-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox