From: Marco Felsch <m.felsch@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 6/7] RISC-V: squash 64bit defconfigs into rv64i_defconfig
Date: Wed, 5 Oct 2022 13:12:13 +0200 [thread overview]
Message-ID: <20221005111214.148844-6-m.felsch@pengutronix.de> (raw)
In-Reply-To: <20221005111214.148844-1-m.felsch@pengutronix.de>
This commit squashes all 64bit risc-v defconfigs into one like armv8.
The 32bit defconfigs are not changed since those systems have tight
resource constraints and a generic defconfig may break some systems.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
v2:
- new commit
Documentation/boards/emulated.rst | 4 +-
Documentation/boards/riscv.rst | 6 +-
arch/riscv/Makefile | 2 +-
.../{virt64_defconfig => rv64i_defconfig} | 42 +++++-
arch/riscv/configs/sifive_defconfig | 129 -----------------
arch/riscv/configs/starfive_defconfig | 131 ------------------
6 files changed, 47 insertions(+), 267 deletions(-)
rename arch/riscv/configs/{virt64_defconfig => rv64i_defconfig} (76%)
delete mode 100644 arch/riscv/configs/sifive_defconfig
delete mode 100644 arch/riscv/configs/starfive_defconfig
diff --git a/Documentation/boards/emulated.rst b/Documentation/boards/emulated.rst
index 584883d6ef..ef035ec69a 100644
--- a/Documentation/boards/emulated.rst
+++ b/Documentation/boards/emulated.rst
@@ -64,12 +64,12 @@ The script can also be used with a precompiled barebox tree::
``emulate.pl`` also has some knowledge on paravirtualized devices::
# Run target and pass a block device (here /dev/virtioblk0)
- ARCH=riscv ./test/emulate.pl --blk=rootfs.ext4 virt64_defconfig
+ ARCH=riscv ./test/emulate.pl --blk=rootfs.ext4 rv64i_defconfig
Needed command line options can be passed directly to the
emulator/``pytest`` as well by placing them behind ``--``::
# appends -device ? to the command line. Add -n to see the final result
- ARCH=riscv ./test/emulate.pl virt64_defconfig -- -device ?
+ ARCH=riscv ./test/emulate.pl rv64i_defconfig -- -device ?
For a complete listing of options run ``./test/emulate.pl -h``.
diff --git a/Documentation/boards/riscv.rst b/Documentation/boards/riscv.rst
index b7a3a95f0f..e69eca78c8 100644
--- a/Documentation/boards/riscv.rst
+++ b/Documentation/boards/riscv.rst
@@ -6,10 +6,10 @@ QEMU Virt
barebox supports both the qemu riscv32 and riscv64 ``-M virt`` boards::
- make ARCH=riscv virt64_defconfig
+ make ARCH=riscv rv64i_defconfig
qemu-system-riscv64 -M virt -serial stdio -kernel build/images/barebox-dt-2nd.img
-Replace ``64`` by ``32`` for 32-bit build. :ref:`virtio_sect` over MMIO is supported and
+For 32-bit builds use ``virt32_defconfig``. :ref:`virtio_sect` over MMIO is supported and
can be used for e.g. an extra console or to pass in a virtio-blk device::
qemu-system-riscv64 -M virt -serial stdio \
@@ -65,7 +65,7 @@ BeagleV
barebox has second-stage support for the BeagleV Starlight::
- make ARCH=riscv starfive_defconfig
+ make ARCH=riscv rv64i_defconfig
make
Thie resulting ``./images/barebox-beaglev-starlight.img`` can be used as payload
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 6fbf1d4ddd..279db046c0 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
-KBUILD_DEFCONFIG := virt64_defconfig
+KBUILD_DEFCONFIG := rv64i_defconfig
KBUILD_CPPFLAGS += -fno-strict-aliasing
diff --git a/arch/riscv/configs/virt64_defconfig b/arch/riscv/configs/rv64i_defconfig
similarity index 76%
rename from arch/riscv/configs/virt64_defconfig
rename to arch/riscv/configs/rv64i_defconfig
index c2edd2dc28..6c8409567d 100644
--- a/arch/riscv/configs/virt64_defconfig
+++ b/arch/riscv/configs/rv64i_defconfig
@@ -1,5 +1,11 @@
CONFIG_ARCH_RV64I=y
+CONFIG_SOC_SIFIVE=y
+CONFIG_SOC_STARFIVE=y
CONFIG_SOC_VIRT=y
+CONFIG_BOARD_BEAGLEV=y
+CONFIG_BOARD_BEAGLEV_BETA=y
+CONFIG_BOARD_HIFIVE=y
+CONFIG_BOARD_RISCV_GENERIC_DT=y
CONFIG_RISCV_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_STACK_SIZE=0x20000
CONFIG_MALLOC_SIZE=0x0
@@ -13,6 +19,7 @@ CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
CONFIG_BOOTM_VERBOSE=y
CONFIG_BOOTM_INITRD=y
+CONFIG_SYSTEM_PARTITIONS=y
CONFIG_BLSPEC=y
CONFIG_CONSOLE_ACTIVATE_ALL=y
CONFIG_CONSOLE_ALLOW_COLOR=y
@@ -47,9 +54,11 @@ CONFIG_CMD_LN=y
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_SHA1SUM=y
CONFIG_CMD_SHA256SUM=y
+CONFIG_CMD_UNCOMPRESS=y
CONFIG_CMD_MSLEEP=y
CONFIG_CMD_SLEEP=y
CONFIG_CMD_DHCP=y
+CONFIG_CMD_MIITOOL=y
CONFIG_CMD_PING=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_EDIT=y
@@ -66,6 +75,7 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_POWEROFF=y
CONFIG_CMD_SPI=y
+CONFIG_CMD_WD=y
CONFIG_CMD_2048=y
CONFIG_CMD_BAREBOX_UPDATE=y
CONFIG_CMD_OF_DIFF=y
@@ -86,12 +96,21 @@ CONFIG_OF_BAREBOX_DRIVERS=y
CONFIG_OF_BAREBOX_ENV_IN_FS=y
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_VIRTIO_CONSOLE=y
+CONFIG_SERIAL_SIFIVE=y
+CONFIG_DRIVER_NET_MACB=y
+CONFIG_DRIVER_NET_DESIGNWARE=y
+CONFIG_DRIVER_NET_DESIGNWARE_GENERIC=y
+CONFIG_DRIVER_NET_DESIGNWARE_STARFIVE=y
CONFIG_DRIVER_NET_VIRTIO=y
+CONFIG_MICREL_PHY=y
+CONFIG_SPI_MEM=y
CONFIG_DRIVER_SPI_GPIO=y
+CONFIG_SPI_SIFIVE=y
CONFIG_I2C=y
CONFIG_I2C_GPIO=y
CONFIG_MTD=y
# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_MTD_RAW_DEVICE=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_MTDRAM=y
@@ -104,21 +123,42 @@ CONFIG_VIDEO=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_DRIVER_VIDEO_BOCHS_PCI=y
CONFIG_DRIVER_VIDEO_SIMPLEFB_CLIENT=y
+CONFIG_MCI=y
+CONFIG_MCI_SPI=y
+CONFIG_MCI_DW=y
CONFIG_CLOCKSOURCE_DUMMY_RATE=60000
CONFIG_STATE_DRV=y
CONFIG_EEPROM_AT24=y
CONFIG_VIRTIO_INPUT=y
+CONFIG_SRAM=y
+CONFIG_STARFIVE_PWRSEQ=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_GPIO_OF=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_WATCHDOG=y
+CONFIG_STARFIVE_WDT=y
CONFIG_HWRNG=y
CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_GPIO_SIFIVE=y
+CONFIG_HW_RANDOM_STARFIVE=y
CONFIG_GPIO_GENERIC_PLATFORM=y
-# CONFIG_PINCTRL is not set
+CONFIG_GPIO_STARFIVE=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_RMEM=y
+CONFIG_STARFIVE_OTP=y
CONFIG_PCI_ECAM_GENERIC=y
CONFIG_BLK_DEV_NVME=y
CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_POWER_RESET_HTIF_POWEROFF=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_VIRTIO_MMIO=y
+# CONFIG_VIRTIO_MENU is not set
CONFIG_FS_EXT4=y
CONFIG_FS_TFTP=y
CONFIG_FS_NFS=y
diff --git a/arch/riscv/configs/sifive_defconfig b/arch/riscv/configs/sifive_defconfig
deleted file mode 100644
index 6ebe6eaf37..0000000000
--- a/arch/riscv/configs/sifive_defconfig
+++ /dev/null
@@ -1,129 +0,0 @@
-CONFIG_ARCH_RV64I=y
-CONFIG_SOC_SIFIVE=y
-CONFIG_BOARD_HIFIVE=y
-CONFIG_BOARD_RISCV_GENERIC_DT=y
-CONFIG_RISCV_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_STACK_SIZE=0x20000
-CONFIG_MALLOC_SIZE=0x0
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_RELOCATABLE=y
-CONFIG_PANIC_HANG=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_MENU=y
-CONFIG_CONSOLE_ALLOW_COLOR=y
-CONFIG_PBL_CONSOLE=y
-CONFIG_PARTITION_DISK_EFI=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_STATE=y
-CONFIG_STATE_CRYPTO=y
-CONFIG_BOOTCHOOSER=y
-CONFIG_RESET_SOURCE=y
-CONFIG_MACHINE_ID=y
-CONFIG_CMD_DMESG=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_IMD=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_POLLER=y
-CONFIG_CMD_SLICE=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_LOADY=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_BOOTCHOOSER=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_CMP=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_LN=y
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_SHA1SUM=y
-CONFIG_CMD_SHA256SUM=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_FBTEST=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_MM=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DETECT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_POWEROFF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_2048=y
-CONFIG_CMD_BAREBOX_UPDATE=y
-CONFIG_CMD_OF_DIFF=y
-CONFIG_CMD_OF_NODE=y
-CONFIG_CMD_OF_PROPERTY=y
-CONFIG_CMD_OF_DISPLAY_TIMINGS=y
-CONFIG_CMD_OF_FIXUP_STATUS=y
-CONFIG_CMD_OF_OVERLAY=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_DHRYSTONE=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_NET_FASTBOOT=y
-CONFIG_DRIVER_SERIAL_NS16550=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_SERIAL_SIFIVE=y
-CONFIG_DRIVER_NET_MACB=y
-CONFIG_DRIVER_SPI_GPIO=y
-CONFIG_SPI_SIFIVE=y
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_DEVICE=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_M25P80=y
-CONFIG_DRIVER_CFI=y
-CONFIG_DRIVER_CFI_BANK_WIDTH_8=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIDEO=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_DRIVER_VIDEO_SIMPLEFB_CLIENT=y
-CONFIG_MCI=y
-CONFIG_MCI_SPI=y
-CONFIG_CLOCKSOURCE_DUMMY_RATE=60000
-CONFIG_EEPROM_AT24=y
-CONFIG_HWRNG=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_GPIO_SIFIVE=y
-# CONFIG_PINCTRL is not set
-CONFIG_SYSCON_REBOOT_MODE=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_RESET_SYSCON_POWEROFF=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_FS_EXT4=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_NFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_FS_UIMAGEFS=y
-CONFIG_FS_PSTORE=y
-CONFIG_FS_SQUASHFS=y
-CONFIG_ZLIB=y
-CONFIG_BZLIB=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
-CONFIG_XZ_DECOMPRESS=y
-CONFIG_BASE64=y
-CONFIG_DIGEST_CRC32_GENERIC=y
-CONFIG_IMD_TARGET=y
-CONFIG_BAREBOXENV_TARGET=y
-CONFIG_BAREBOXCRC32_TARGET=y
diff --git a/arch/riscv/configs/starfive_defconfig b/arch/riscv/configs/starfive_defconfig
deleted file mode 100644
index c4df2256f5..0000000000
--- a/arch/riscv/configs/starfive_defconfig
+++ /dev/null
@@ -1,131 +0,0 @@
-CONFIG_ARCH_RV64I=y
-CONFIG_SOC_STARFIVE=y
-CONFIG_BOARD_BEAGLEV=y
-CONFIG_BOARD_BEAGLEV_BETA=y
-CONFIG_BOARD_RISCV_GENERIC_DT=y
-CONFIG_RISCV_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_STACK_SIZE=0x20000
-CONFIG_MALLOC_SIZE=0x0
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_RELOCATABLE=y
-CONFIG_PANIC_HANG=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_MENU=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_SYSTEM_PARTITIONS=y
-CONFIG_IMD_TARGET=y
-CONFIG_CONSOLE_ALLOW_COLOR=y
-CONFIG_PBL_CONSOLE=y
-CONFIG_PARTITION_DISK_EFI=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_BAREBOXENV_TARGET=y
-CONFIG_BAREBOXCRC32_TARGET=y
-CONFIG_STATE=y
-CONFIG_STATE_CRYPTO=y
-CONFIG_BOOTCHOOSER=y
-CONFIG_RESET_SOURCE=y
-CONFIG_MACHINE_ID=y
-CONFIG_CMD_DMESG=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_IMD=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_POLLER=y
-CONFIG_CMD_SLICE=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_LOADY=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_BOOTCHOOSER=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_CMP=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_LN=y
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_SHA1SUM=y
-CONFIG_CMD_SHA256SUM=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_MM=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DETECT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_POWEROFF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_WD=y
-CONFIG_CMD_2048=y
-CONFIG_CMD_BAREBOX_UPDATE=y
-CONFIG_CMD_OF_DIFF=y
-CONFIG_CMD_OF_NODE=y
-CONFIG_CMD_OF_PROPERTY=y
-CONFIG_CMD_OF_DISPLAY_TIMINGS=y
-CONFIG_CMD_OF_FIXUP_STATUS=y
-CONFIG_CMD_OF_OVERLAY=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_DHRYSTONE=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_DRIVER_SERIAL_NS16550=y
-CONFIG_DRIVER_NET_DESIGNWARE=y
-CONFIG_DRIVER_NET_DESIGNWARE_GENERIC=y
-CONFIG_DRIVER_NET_DESIGNWARE_STARFIVE=y
-CONFIG_MICREL_PHY=y
-CONFIG_SPI_MEM=y
-CONFIG_DRIVER_SPI_GPIO=y
-CONFIG_MCI=y
-CONFIG_MCI_DW=y
-CONFIG_CLOCKSOURCE_DUMMY_RATE=60000
-CONFIG_SRAM=y
-CONFIG_STARFIVE_PWRSEQ=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_LED_GPIO_OF=y
-CONFIG_LED_TRIGGERS=y
-CONFIG_WATCHDOG=y
-CONFIG_STARFIVE_WDT=y
-CONFIG_HWRNG=y
-CONFIG_HW_RANDOM_STARFIVE=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_STARFIVE=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_NVMEM=y
-CONFIG_NVMEM_RMEM=y
-CONFIG_STARFIVE_OTP=y
-CONFIG_SYSCON_REBOOT_MODE=y
-CONFIG_NVMEM_REBOOT_MODE=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_RESET_SYSCON_POWEROFF=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-# CONFIG_VIRTIO_MENU is not set
-CONFIG_FS_EXT4=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_NFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_FS_UIMAGEFS=y
-CONFIG_FS_PSTORE=y
-CONFIG_FS_SQUASHFS=y
-CONFIG_ZLIB=y
-CONFIG_BZLIB=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
-CONFIG_XZ_DECOMPRESS=y
-CONFIG_BASE64=y
-CONFIG_DIGEST_CRC32_GENERIC=y
--
2.30.2
next prev parent reply other threads:[~2022-10-05 11:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-05 11:12 [PATCH v2 1/7] RISC-V: cache: fix local_flush_icache_all enabling Marco Felsch
2022-10-05 11:12 ` [PATCH v2 2/7] RISC-V: add riscv_vendor_id() support Marco Felsch
2022-10-05 11:12 ` [PATCH v2 3/7] RISC-V: import vendorid list from linux Marco Felsch
2022-10-05 11:12 ` [PATCH v2 4/7] RISC-V: use m/sscratch registers for barebox_riscv_pbl_flags Marco Felsch
2022-10-05 11:12 ` [PATCH v2 5/7] RISC-V: implement cache-management errata for T-Head SoCs Marco Felsch
2022-10-05 11:12 ` Marco Felsch [this message]
2022-10-22 7:55 ` [PATCH v2 6/7] RISC-V: squash 64bit defconfigs into rv64i_defconfig Antony Pavlov
2022-10-24 7:53 ` Marco Felsch
2022-10-24 8:20 ` Ahmad Fatoum
2022-10-05 11:12 ` [PATCH v2 7/7] RISC-V: add Allwinner Sun20i D1 Nezha support Marco Felsch
2022-10-07 8:30 ` [PATCH v2 1/7] RISC-V: cache: fix local_flush_icache_all enabling Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221005111214.148844-6-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox