[PATCH v4 1/8] net: add promiscuous mode configuration support

[PATCH v4 1/8] net: add promiscuous mode configuration support

[Oleksij Rempel]

This configuration is mostly needed for controllers attached to switches
with different MAC address configurations or for debugging networking
issues.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 include/net.h | 3 +++
 net/eth.c     | 8 ++++++++
 2 files changed, 11 insertions(+)

diff --git a/include/net.h b/include/net.h
index 338033d698..f9d1fbfc18 100644
--- a/include/net.h
+++ b/include/net.h
@@ -49,6 +49,8 @@ struct eth_device {
 				 int *length);
 	void (*rx_monitor) (struct eth_device*, void *packet, int length);
 	void (*tx_monitor) (struct eth_device*, void *packet, int length);
+	/* Set promiscuous mode */
+	int  (*set_promisc) (struct eth_device*, bool enable);
 
 	struct eth_device *next;
 	void *priv;
@@ -113,6 +115,7 @@ int eth_send(struct eth_device *edev, void *packet, int length);	   /* Send a pa
 int eth_rx(void);			/* Check for received packets	*/
 void eth_open_all(void);
 struct eth_device *of_find_eth_device_by_node(struct device_node *np);
+int eth_set_promisc(struct eth_device *edev, bool enable);
 
 /* associate a MAC address to a ethernet device. Should be called by
  * board code for boards which store their MAC address at some unusual
diff --git a/net/eth.c b/net/eth.c
index 8f6ff7db3a..19654cdd51 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -31,6 +31,14 @@ struct eth_ethaddr {
 
 static LIST_HEAD(ethaddr_list);
 
+int eth_set_promisc(struct eth_device *edev, bool enable)
+{
+	if (!edev->set_promisc)
+		return -EOPNOTSUPP;
+
+	return edev->set_promisc(edev, enable);
+}
+
 int eth_set_ethaddr(struct eth_device *edev, const char *ethaddr)
 {
 	int ret;
-- 
2.30.2

[PATCH v4 2/8] net: usb: asix: add promisc mode support

[Oleksij Rempel]

Add promisc mode configuration support

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/usb/asix.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 28a3534bcf..2d7114e5b1 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -427,6 +427,25 @@ static int asix_set_ethaddr(struct eth_device *edev, const unsigned char *adr)
 	return 0;
 }
 
+static int asix_set_promisc(struct eth_device *edev, bool enable)
+{
+	struct usbnet *dev = container_of(edev, struct usbnet, edev);
+	u16 rx_ctl;
+	int ret;
+
+	rx_ctl = asix_read_rx_ctl(dev);
+
+	if (enable)
+		rx_ctl |= AX_RX_CTL_PRO;
+	else
+		rx_ctl &= ~AX_RX_CTL_PRO;
+
+	if ((ret = asix_write_rx_ctl(dev, rx_ctl)) < 0)
+		return ret;
+
+	return 0;
+}
+
 static int ax88172_get_ethaddr(struct eth_device *edev, unsigned char *adr)
 {
 	struct usbnet *udev = container_of(edev, struct usbnet, edev);
@@ -664,6 +683,7 @@ static int ax88772_bind(struct usbnet *dev)
 
 	dev->edev.get_ethaddr = asix_get_ethaddr;
 	dev->edev.set_ethaddr = asix_set_ethaddr;
+	dev->edev.set_promisc = asix_set_promisc;
 	asix_init_mii(dev);
 
 	if ((ret = asix_sw_reset(dev, AX_SWRESET_PRL)) < 0)
-- 
2.30.2

[PATCH v4 3/8] ethlog: option to enable/disable promisc mode

[Oleksij Rempel]

Add -p option to control promisc mode of the ethrnet device.
Example:
ethlog -p eth0 - will enable promisc mode and logging on the eth0
device
ethlog -rp eth0 - will disable promisc mode and logging on the eth0
device

All the same commands without "-p" option will not touch promisc
configuration.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 commands/ethlog.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/commands/ethlog.c b/commands/ethlog.c
index 0cc93ba808..7885d32c6b 100644
--- a/commands/ethlog.c
+++ b/commands/ethlog.c
@@ -29,11 +29,14 @@ static int do_ethlog(int argc, char *argv[])
 {
 	struct eth_device *edev;
 	const char *edevname;
-	bool remove = false;
-	int opt;
+	bool remove = false, promisc = false;
+	int opt, ret;
 
-	while ((opt = getopt(argc, argv, "r")) > 0) {
+	while ((opt = getopt(argc, argv, "pr")) > 0) {
 		switch (opt) {
+		case 'p':
+			promisc = true;
+			break;
 		case 'r':
 			remove = true;
 			break;
@@ -56,10 +59,19 @@ static int do_ethlog(int argc, char *argv[])
 	if (remove) {
 		edev->tx_monitor = NULL;
 		edev->rx_monitor = NULL;
+		if (promisc)
+			eth_set_promisc(edev, false);
 
 		return 0;
 	}
 
+	if (promisc) {
+		ret = eth_set_promisc(edev, true);
+		if (ret)
+			dev_warn(&edev->dev, "Failed to set promisc mode: %pe\n",
+				 ERR_PTR(ret));
+	}
+
 	edev->tx_monitor = ethlog_tx_monitor;
 	edev->rx_monitor = ethlog_rx_monitor;
 
@@ -69,12 +81,13 @@ static int do_ethlog(int argc, char *argv[])
 BAREBOX_CMD_HELP_START(ethlog)
 BAREBOX_CMD_HELP_TEXT("Options:")
 BAREBOX_CMD_HELP_OPT("-r", "remove log handler from Ethernet interface")
+BAREBOX_CMD_HELP_OPT("-p", "Enable promisc mode, or disable if -r is used")
 BAREBOX_CMD_HELP_END
 
 BAREBOX_CMD_START(ethlog)
 	.cmd		= do_ethlog,
 	BAREBOX_CMD_DESC("ETHLOG - tool to get dump of Ethernet packets")
-	BAREBOX_CMD_OPTS("[-r] [device]")
+	BAREBOX_CMD_OPTS("[-rp] [device]")
 	BAREBOX_CMD_GROUP(CMD_GRP_NET)
 	BAREBOX_CMD_COMPLETE(eth_complete)
 BAREBOX_CMD_END
-- 
2.30.2

[PATCH v4 4/8] net: dsa: enable promiscuous mode for switch master edev

[Oleksij Rempel]

Typical use case for DSA framework on barebox is a port multiplexer. This
means, we mostly have different MAC addresses on each port. To make this
work, we need to enable promiscuous mode on the master Ethernet
controller.

With this patch, promiscuous mode will be enabled automatically, as soon
as at least one switch port is enabled and this mode will be disabled
after all switch ports are disabled as well.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/dsa.c b/drivers/net/dsa.c
index 040ba897e2..124059ee3c 100644
--- a/drivers/net/dsa.c
+++ b/drivers/net/dsa.c
@@ -129,6 +129,11 @@ static int dsa_port_start(struct eth_device *edev)
 				return ret;
 		}
 
+		ret = eth_set_promisc(ds->edev_master, true);
+		if (ret)
+			dev_warn(ds->dev, "Failed to set promisc mode. Using different eth addresses may not work. %pe\n",
+				 ERR_PTR(ret));
+
 		eth_open(ds->edev_master);
 	}
 
@@ -160,6 +165,7 @@ static void dsa_port_stop(struct eth_device *edev)
 			ops->port_disable(dpc, ds->cpu_port,
 					ds->cpu_port_fixed_phy);
 
+		eth_set_promisc(ds->edev_master, false);
 		eth_close(ds->edev_master);
 	}
 }
-- 
2.30.2

[PATCH v4 5/8] drivers: net: fec_imx: add promiscuous mode configuration support

[Oleksij Rempel]

Add promiscuous mode configuration support to allow using multiple MAC address
on same FEC interface.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/fec_imx.c | 24 +++++++++++++++++++++++-
 drivers/net/fec_imx.h |  1 +
 2 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
index 673555a48a..da42a479d9 100644
--- a/drivers/net/fec_imx.c
+++ b/drivers/net/fec_imx.c
@@ -25,6 +25,22 @@
 
 #include "fec_imx.h"
 
+static int fec_set_promisc(struct eth_device *edev, bool enable)
+{
+	struct fec_priv *fec = (struct fec_priv *)edev->priv;
+	u32 rcntl;
+
+	rcntl = readl(fec->regs + FEC_R_CNTRL);
+
+	if (enable)
+		rcntl |= FEC_R_CNTRL_PROMISC;
+	else
+		rcntl &= ~FEC_R_CNTRL_PROMISC;
+
+	writel(rcntl, fec->regs + FEC_R_CNTRL);
+
+	return 0;
+}
 
 /*
  * MII-interface related functions
@@ -257,10 +273,13 @@ static int fec_init(struct eth_device *dev)
 	 */
 	writel(0x00000000, fec->regs + FEC_IMASK);
 
+	rcntl = readl(fec->regs + FEC_R_CNTRL);
+	rcntl &= FEC_R_CNTRL_PROMISC;
+
 	/*
 	 * Set FEC-Lite receive control register(R_CNTRL):
 	 */
-	rcntl = FEC_R_CNTRL_MAX_FL(1518);
+	rcntl |= FEC_R_CNTRL_MAX_FL(1518);
 
 	rcntl |= FEC_R_CNTRL_MII_MODE;
 	/*
@@ -768,6 +787,7 @@ static int fec_probe(struct device_d *dev)
 	edev->halt = fec_halt;
 	edev->get_ethaddr = fec_get_hwaddr;
 	edev->set_ethaddr = fec_set_hwaddr;
+	edev->set_promisc = fec_set_promisc;
 	edev->parent = dev;
 
 	dma_set_mask(dev, DMA_BIT_MASK(32));
@@ -834,6 +854,8 @@ static int fec_probe(struct device_d *dev)
 	if (ret)
 		goto free_gpio;
 
+	fec_set_promisc(edev, false);
+
 	/*
 	 * reserve memory for both buffer descriptor chains at once
 	 * Datasheet forces the startaddress of each chain is 16 byte aligned
diff --git a/drivers/net/fec_imx.h b/drivers/net/fec_imx.h
index 316eefe48f..9bb1c64b55 100644
--- a/drivers/net/fec_imx.h
+++ b/drivers/net/fec_imx.h
@@ -58,6 +58,7 @@
 #define FEC_R_CNTRL_RMII_10T		(1 << 9) /* i.MX28 specific */
 #define FEC_R_CNTRL_RMII_MODE		(1 << 8) /* i.MX28 specific */
 #define FEC_R_CNTRL_FCE			(1 << 5)
+#define FEC_R_CNTRL_PROMISC		(1 << 3)
 #define FEC_R_CNTRL_MII_MODE		(1 << 2)
 
 #define FEC_IEVENT_HBERR                0x80000000 /* Note: Not on i.MX28 */
-- 
2.30.2

[PATCH v4 6/8] net: dsa: fix of_device_ensure_probed*() for switch ports

[Oleksij Rempel]

Create ports by using of_platform_device_create() in the same way as it
is used by of_device_ensure_probed*(). Otherwise we are creating
multiple devices for the same node.

At same time we need to link dummy driver to make this logic work.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa.c | 18 +++++-------------
 include/dsa.h     |  2 +-
 2 files changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/net/dsa.c b/drivers/net/dsa.c
index 124059ee3c..bc33892f39 100644
--- a/drivers/net/dsa.c
+++ b/drivers/net/dsa.c
@@ -59,7 +59,7 @@ static int dsa_port_probe(struct eth_device *edev)
 	int ret;
 
 	if (ops->port_probe) {
-		interface = of_get_phy_mode(dp->dev.device_node);
+		interface = of_get_phy_mode(dp->dev->device_node);
 		ret = ops->port_probe(dp, dp->index, interface);
 		if (ret)
 			return ret;
@@ -93,7 +93,7 @@ static int dsa_port_start(struct eth_device *edev)
 	if (dp->enabled)
 		return -EBUSY;
 
-	interface = of_get_phy_mode(dp->dev.device_node);
+	interface = of_get_phy_mode(dp->dev->device_node);
 
 	if (ops->port_pre_enable) {
 		/* In case of RMII interface we need to enable RMII clock
@@ -241,21 +241,13 @@ static int dsa_switch_register_edev(struct dsa_switch *ds,
 	struct eth_device *edev;
 	struct device_d *dev;
 	struct dsa_port *dp;
-	int ret;
 
 	ds->dp[port] = xzalloc(sizeof(*dp));
-
 	dp = ds->dp[port];
-	dev = &dp->dev;
-
-	dev_set_name(dev, "dsa_port");
-	dev->id = DEVICE_ID_DYNAMIC;
-	dev->parent = ds->dev;
-	dev->device_node = dn;
 
-	ret = register_device(dev);
-	if (ret)
-		return ret;
+	dev = of_platform_device_create(dn, ds->dev);
+	of_platform_device_dummy_drv(dev);
+	dp->dev = dev;
 
 	dp->rx_buf = xmalloc(DSA_PKTSIZE);
 	dp->ds = ds;
diff --git a/include/dsa.h b/include/dsa.h
index 75a939f2cb..f428aa74a5 100644
--- a/include/dsa.h
+++ b/include/dsa.h
@@ -58,7 +58,7 @@ struct dsa_ops {
 };
 
 struct dsa_port {
-	struct device_d dev;
+	struct device_d *dev;
 	struct dsa_switch *ds;
 	unsigned int index;
 	struct eth_device edev;
-- 
2.30.2

[PATCH v4 7/8] ARM: boards: skov-imx6: convert all pr_ to dev_ prints

[Oleksij Rempel]

Unify all printing messages and make use of dev_ instead of pr_.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boards/skov-imx6/board.c | 73 ++++++++++++++++++-------------
 1 file changed, 42 insertions(+), 31 deletions(-)

diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c
index 3c51b76735..3f5645daff 100644
--- a/arch/arm/boards/skov-imx6/board.c
+++ b/arch/arm/boards/skov-imx6/board.c
@@ -17,6 +17,12 @@
 
 #include "version.h"
 
+struct skov_imx6_priv {
+	struct device_d *dev;
+};
+
+static struct skov_imx6_priv *skov_priv;
+
 static int eth_of_fixup_node(struct device_node *root, const char *node_path,
 			     const u8 *ethaddr)
 {
@@ -27,21 +33,21 @@ static int eth_of_fixup_node(struct device_node *root, const char *node_path,
 		unsigned char ethaddr_str[sizeof("xx:xx:xx:xx:xx:xx")];
 
 		ethaddr_to_string(ethaddr, ethaddr_str);
-		pr_err("The mac-address %s is invalid.\n", ethaddr_str);
+		dev_err(skov_priv->dev, "The mac-address %s is invalid.\n", ethaddr_str);
 		return -EINVAL;
 	}
 
 	node = of_find_node_by_path_from(root, node_path);
 	if (!node) {
-		pr_err("Did not find node %s to fix up with stored mac-address.\n",
-		       node_path);
+		dev_err(skov_priv->dev, "Did not find node %s to fix up with stored mac-address.\n",
+		        node_path);
 		return -ENOENT;
 	}
 
 	ret = of_set_property(node, "mac-address", ethaddr, ETH_ALEN, 1);
 	if (ret)
-		pr_err("Setting mac-address property of %s failed with: %s.\n",
-		       node->full_name, strerror(-ret));
+		dev_err(skov_priv->dev, "Setting mac-address property of %s failed with: %s.\n",
+		        node->full_name, strerror(-ret));
 
 	return ret;
 }
@@ -54,7 +60,7 @@ static int eth_of_fixup_node_from_eth_device(struct device_node *root,
 
 	edev = eth_get_byname(ethname);
 	if (!edev) {
-		pr_err("Did not find eth device \"%s\" to copy mac-address from.\n", ethname);
+		dev_err(skov_priv->dev, "Did not find eth device \"%s\" to copy mac-address from.\n", ethname);
 		return -ENOENT;
 	}
 
@@ -68,14 +74,14 @@ static int get_mac_address_from_env_variable(const char *env, u8 ethaddr[ETH_ALE
 
 	ethaddr_str = getenv(env);
 	if (!ethaddr_str) {
-		pr_err("State variable %s storing the mac-address not found.\n", env);
+		dev_err(skov_priv->dev, "State variable %s storing the mac-address not found.\n", env);
 		return -ENOENT;
 	}
 
 	ret = string_to_ethaddr(ethaddr_str, ethaddr);
 	if (ret < 0) {
-		pr_err("Could not convert \"%s\" in state variable %s into mac-address.\n",
-		       ethaddr_str, env);
+		dev_err(skov_priv->dev, "Could not convert \"%s\" in state variable %s into mac-address.\n",
+		        ethaddr_str, env);
 		return -EINVAL;
 	}
 
@@ -90,13 +96,13 @@ static int get_default_mac_address_from_state_node(const char *state_node_path,
 
 	node = of_find_node_by_path(state_node_path);
 	if (!node) {
-		pr_err("Node %s defining the state variable not found.\n", state_node_path);
+		dev_err(skov_priv->dev, "Node %s defining the state variable not found.\n", state_node_path);
 		return -ENOENT;
 	}
 
 	ret = of_property_read_u8_array(node, "default", ethaddr, ETH_ALEN);
 	if (ret) {
-		pr_err("Node %s has no property \"default\" of proper type.\n", state_node_path);
+		dev_err(skov_priv->dev, "Node %s has no property \"default\" of proper type.\n", state_node_path);
 		return -ENOENT;
 	}
 
@@ -340,18 +346,18 @@ static void skov_imx6_no_switch(struct device_node *root)
 	if (node) {
 		ret = of_device_disable(node);
 		if (ret)
-			pr_warn("Can't disable %s\n", fec_alias);
+			dev_warn(skov_priv->dev, "Can't disable %s\n", fec_alias);
 	} else {
-		pr_warn("Can't find node by alias: %s\n", fec_alias);
+		dev_warn(skov_priv->dev, "Can't find node by alias: %s\n", fec_alias);
 	}
 
 	node = of_find_node_by_alias(root, "mdio-gpio0");
 	if (node) {
 		ret = of_device_disable(node);
 		if (ret)
-			pr_warn("Can't disable mdio-gpio0 node\n");
+			dev_warn(skov_priv->dev, "Can't disable mdio-gpio0 node\n");
 	} else {
-		pr_warn("Can't find mdio-gpio0 node\n");
+		dev_warn(skov_priv->dev, "Can't find mdio-gpio0 node\n");
 	}
 }
 
@@ -398,7 +404,7 @@ static void skov_imx6_switch(struct device_node *root)
 	if (ret) {
 		ret = skov_imx6_switch_port(root, old);
 		if (ret)
-			pr_err("Filed to set mac address\n");
+			dev_err(skov_priv->dev, "Filed to set mac address\n");
 	}
 }
 
@@ -423,7 +429,7 @@ static int skov_imx6_fixup(struct device_node *root, void *unused)
 	default:
 		val = getenv("state.display.brightness");
 		if (!val) {
-			pr_err("could not get default display brightness\n");
+			dev_err(skov_priv->dev, "could not get default display brightness\n");
 			return 0;
 		}
 
@@ -434,7 +440,7 @@ static int skov_imx6_fixup(struct device_node *root, void *unused)
 	for_each_compatible_node_from(node, root, NULL, "pwm-backlight") {
 		ret = of_property_write_u32(node, "default-brightness-level", brightness);
 		if (ret)
-			pr_err("error %d while setting default-brightness-level property on node %s to %d\n",
+			dev_err(skov_priv->dev, "error %d while setting default-brightness-level property on node %s to %d\n",
 				ret, node->name, brightness);
 	}
 
@@ -463,9 +469,9 @@ static void skov_init_board(const struct board_description *variant)
 	if (gpio_np) {
 		ret = of_device_ensure_probed(gpio_np);
 		if (ret)
-			pr_warn("Can't probe GPIO node\n");
+			dev_warn(skov_priv->dev, "Can't probe GPIO node\n");
 	} else {
-		pr_warn("Can't get GPIO node\n");
+		dev_warn(skov_priv->dev, "Can't get GPIO node\n");
 	}
 
 	imx6_bbu_internal_spi_i2c_register_handler("spiflash", "/dev/m25p0.barebox",
@@ -484,12 +490,12 @@ static void skov_init_board(const struct board_description *variant)
 		break;
 	}
 
-	pr_notice("Using environment in %s\n", envdev);
+	dev_notice(skov_priv->dev, "Using environment in %s\n", envdev);
 
 	ret = of_device_enable_path(environment_path);
 	if (ret < 0)
-		pr_warn("Failed to enable environment partition '%s' (%d)\n",
-			environment_path, ret);
+		dev_warn(skov_priv->dev, "Failed to enable environment partition '%s' (%d)\n",
+			 environment_path, ret);
 
 	if (variant->flags & SKOV_NEED_ENABLE_RMII) {
 		/*
@@ -523,7 +529,7 @@ static void skov_init_board(const struct board_description *variant)
 		if (np)
 			of_device_enable_and_register(np);
 		else
-			pr_err("Cannot find \"fsl,imx-parallel-display\" node\n");
+			dev_err(skov_priv->dev, "Cannot find \"fsl,imx-parallel-display\" node\n");
 	}
 
 	if (variant->flags & SKOV_DISPLAY_LVDS) {
@@ -531,14 +537,14 @@ static void skov_init_board(const struct board_description *variant)
 		if (np)
 			of_device_enable_and_register(np);
 		else
-			pr_err("Cannot find \"fsl,imx6q-ldb\" node\n");
+			dev_err(skov_priv->dev, "Cannot find \"fsl,imx6q-ldb\" node\n");
 
 		/* ... as well as its channel 0 */
 		np = of_find_node_by_name_address(np, "lvds-channel@0");
 		if (np)
 			of_device_enable(np);
 		else
-			pr_err("Cannot find \"lvds-channel@0\" node\n");
+			dev_err(skov_priv->dev, "Cannot find \"lvds-channel@0\" node\n");
 	}
 }
 
@@ -557,7 +563,7 @@ static int skov_switch_test(void)
 	 */
 	sw_dev = of_find_device_by_node_path("/mdio/switch@0");
 	if (!sw_dev) {
-		pr_err("switch@0 device was not created!\n");
+		dev_err(skov_priv->dev, "switch@0 device was not created!\n");
 		goto no_switch;
 	}
 
@@ -567,15 +573,15 @@ static int skov_switch_test(void)
 no_switch:
 	skov_have_switch = false;
 
-	pr_notice("No-switch variant is detected\n");
+	dev_notice(skov_priv->dev, "No-switch variant is detected\n");
 
 	eth0 = get_device_by_name("eth0");
 	if (eth0) {
 		ret = dev_set_param(eth0, "mode", "disabled");
 		if (ret)
-			pr_warn("Can't set eth0 mode\n");
+			dev_warn(skov_priv->dev, "Can't set eth0 mode\n");
 	} else {
-		pr_warn("Can't disable eth0\n");
+		dev_warn(skov_priv->dev, "Can't disable eth0\n");
 	}
 
 	return 0;
@@ -584,6 +590,7 @@ late_initcall(skov_switch_test);
 
 static int skov_imx6_probe(struct device_d *dev)
 {
+	struct skov_imx6_priv *priv;
 	unsigned v = 0;
 	const struct board_description *variant;
 
@@ -603,6 +610,10 @@ static int skov_imx6_probe(struct device_d *dev)
 
 	skov_board_no = v;
 
+	priv = xzalloc(sizeof(*priv));
+	priv->dev = dev;
+	skov_priv = priv;
+
 	globalvar_add_simple_int("board.no", &skov_board_no, "%u");
 	globalvar_add_simple("board.variant", variant->variant);
 	globalvar_add_simple("board.revision",variant->revision);
@@ -644,7 +655,7 @@ static void skov_imx6_devices_shutdown(void)
 
 	external = getenv("state.display.external");
 	if (!external) {
-		pr_err("could not get state variable display.external\n");
+		dev_err(skov_priv->dev, "could not get state variable display.external\n");
 		return;
 	}
 
-- 
2.30.2

[PATCH v4 8/8] ARM: boards: skov-imx6: assigned separate MAC address to LAN2

[Oleksij Rempel]

We have two external ports and different MAC addresses on each port. So,
assign different MAC to the LAN2. The address on LAN1 is the
system default address.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boards/skov-imx6/board.c | 32 ++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c
index 3f5645daff..19f91ab481 100644
--- a/arch/arm/boards/skov-imx6/board.c
+++ b/arch/arm/boards/skov-imx6/board.c
@@ -548,6 +548,33 @@ static void skov_init_board(const struct board_description *variant)
 	}
 }
 
+static int skov_set_switch_lan2_mac(struct skov_imx6_priv *priv)
+{
+	const char *state = "/state/ethaddr/eth2";
+	struct device_node *lan2_np;
+	u8 ethaddr[ETH_ALEN];
+	int ret;
+
+	ret = get_mac_address_from_env_variable("state.ethaddr.eth2", ethaddr);
+	if (ret || !is_valid_ether_addr(ethaddr)) {
+		ret = get_default_mac_address_from_state_node(state, ethaddr);
+		if (ret || !is_valid_ether_addr(ethaddr)) {
+			dev_err(priv->dev, "can't get MAC for LAN2\n");
+			return -ENODEV;
+		}
+	}
+
+	lan2_np = of_find_node_by_path("/mdio/switch@0/ports/ports@1");
+	if (!lan2_np) {
+		dev_err(priv->dev, "LAN2 node not found\n");
+		return -ENODEV;
+	}
+
+	of_eth_register_ethaddr(lan2_np, ethaddr);
+
+	return 0;
+}
+
 static int skov_switch_test(void)
 {
 	struct device_d *sw_dev;
@@ -567,8 +594,11 @@ static int skov_switch_test(void)
 		goto no_switch;
 	}
 
-	if (dev_is_probed(sw_dev))
+	if (dev_is_probed(sw_dev)) {
+		skov_set_switch_lan2_mac(skov_priv);
+		/* even if we fail, continue to boot as good as possible */
 		return 0;
+	}
 
 no_switch:
 	skov_have_switch = false;
-- 
2.30.2

Re: [PATCH v4 3/8] ethlog: option to enable/disable promisc mode

[Johannes Zink]

Hi Oleksij,

On Tue, 2022-11-08 at 07:10 +0100, Oleksij Rempel wrote:
> Add -p option to control promisc mode of the ethrnet device.
> 
just found a small typo: s/ethrnet/ethernet/

Best regards
Johannes

> Example:
> ethlog -p eth0 - will enable promisc mode and logging on the eth0
> device
> ethlog -rp eth0 - will disable promisc mode and logging on the eth0
> device
> 
> All the same commands without "-p" option will not touch promisc
> configuration.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  commands/ethlog.c | 21 +++++++++++++++++----
>  1 file changed, 17 insertions(+), 4 deletions(-)
> 
> diff --git a/commands/ethlog.c b/commands/ethlog.c
> index 0cc93ba808..7885d32c6b 100644
> --- a/commands/ethlog.c
> +++ b/commands/ethlog.c
> @@ -29,11 +29,14 @@ static int do_ethlog(int argc, char *argv[])
>  {
>         struct eth_device *edev;
>         const char *edevname;
> -       bool remove = false;
> -       int opt;
> +       bool remove = false, promisc = false;
> +       int opt, ret;
>  
> -       while ((opt = getopt(argc, argv, "r")) > 0) {
> +       while ((opt = getopt(argc, argv, "pr")) > 0) {
>                 switch (opt) {
> +               case 'p':
> +                       promisc = true;
> +                       break;
>                 case 'r':
>                         remove = true;
>                         break;
> @@ -56,10 +59,19 @@ static int do_ethlog(int argc, char *argv[])
>         if (remove) {
>                 edev->tx_monitor = NULL;
>                 edev->rx_monitor = NULL;
> +               if (promisc)
> +                       eth_set_promisc(edev, false);
>  
>                 return 0;
>         }
>  
> +       if (promisc) {
> +               ret = eth_set_promisc(edev, true);
> +               if (ret)
> +                       dev_warn(&edev->dev, "Failed to set promisc
> mode: %pe\n",
> +                                ERR_PTR(ret));
> +       }
> +
>         edev->tx_monitor = ethlog_tx_monitor;
>         edev->rx_monitor = ethlog_rx_monitor;
>  
> @@ -69,12 +81,13 @@ static int do_ethlog(int argc, char *argv[])
>  BAREBOX_CMD_HELP_START(ethlog)
>  BAREBOX_CMD_HELP_TEXT("Options:")
>  BAREBOX_CMD_HELP_OPT("-r", "remove log handler from Ethernet
> interface")
> +BAREBOX_CMD_HELP_OPT("-p", "Enable promisc mode, or disable if -r is
> used")
>  BAREBOX_CMD_HELP_END
>  
>  BAREBOX_CMD_START(ethlog)
>         .cmd            = do_ethlog,
>         BAREBOX_CMD_DESC("ETHLOG - tool to get dump of Ethernet
> packets")
> -       BAREBOX_CMD_OPTS("[-r] [device]")
> +       BAREBOX_CMD_OPTS("[-rp] [device]")
>         BAREBOX_CMD_GROUP(CMD_GRP_NET)
>         BAREBOX_CMD_COMPLETE(eth_complete)
>  BAREBOX_CMD_END

-- 
Pengutronix e.K.                | Johannes Zink                  |
Steuerwalder Str. 21            | https://www.pengutronix.de/    |
31137 Hildesheim, Germany       | Phone: +49-5121-206917-0       |
Amtsgericht Hildesheim, HRA 2686| Fax:   +49-5121-206917-5555    |

Re: [PATCH v4 1/8] net: add promiscuous mode configuration support

[Sascha Hauer]

On Tue, Nov 08, 2022 at 07:10:02AM +0100, Oleksij Rempel wrote:
> This configuration is mostly needed for controllers attached to switches
> with different MAC address configurations or for debugging networking
> issues.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  include/net.h | 3 +++
>  net/eth.c     | 8 ++++++++
>  2 files changed, 11 insertions(+)

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |