[PATCH master v2] regulator: rk808: fix misplaced DCDC_REG5

[Ahmad Fatoum <a.fatoum@pengutronix.de>]

Driver was written to mimic existing stpmic1 regulator driver, which had
the implicit assumption of a 1:1 relationship between of_match_data and
regulator configuration with same indices.

Yet DCDC_REG5 was not at the same place it was in the rk_regulator_cfg
due to likely a copy-paste mistake, leading to possibly the wrong
regulators being controlled. Fix this.

Reported-by: Michael Riesch <michael.riesch@wolfvision.net>
Suggested-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
move entry in rk809_reg, not rk809_reg_matches to keep same numbering as
enum rk809_reg_id.
---
 drivers/regulator/rk808-regulator.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 39eadbd3ebe5..f8bc31f354e2 100644
--- a/ drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -526,19 +526,6 @@ static struct rk_regulator_cfg rk809_reg[] = {
 		.enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
 		.enable_val = ENABLE_MASK(RK817_ID_DCDC4),
 		.disable_val = DISABLE_VAL(RK817_ID_DCDC4),
-	}}, {{
-		/* .name = "DCDC_REG5", */
-		.supply_name = "vcc9",
-		.ops = &rk809_buck5_ops_range,
-		.n_voltages = RK809_BUCK5_SEL_CNT,
-		.linear_ranges = rk809_buck5_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(rk809_buck5_voltage_ranges),
-		.vsel_reg = RK809_BUCK5_CONFIG(0),
-		.vsel_mask = RK809_BUCK5_VSEL_MASK,
-		.enable_reg = RK817_POWER_EN_REG(3),
-		.enable_mask = ENABLE_MASK(1),
-		.enable_val = ENABLE_MASK(1),
-		.disable_val = DISABLE_VAL(1),
 	}},
 	RK817_DESC(/* "LDO_REG1", */ "vcc5", 600, 3400, 25,
 		   RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK,
@@ -576,6 +563,20 @@ static struct rk_regulator_cfg rk809_reg[] = {
 		   RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK,
 		   RK817_POWER_EN_REG(3), ENABLE_MASK(0),
 		   DISABLE_VAL(0), 400),
+	{{
+		/* .name = "DCDC_REG5", */
+		.supply_name = "vcc9",
+		.ops = &rk809_buck5_ops_range,
+		.n_voltages = RK809_BUCK5_SEL_CNT,
+		.linear_ranges = rk809_buck5_voltage_ranges,
+		.n_linear_ranges = ARRAY_SIZE(rk809_buck5_voltage_ranges),
+		.vsel_reg = RK809_BUCK5_CONFIG(0),
+		.vsel_mask = RK809_BUCK5_VSEL_MASK,
+		.enable_reg = RK817_POWER_EN_REG(3),
+		.enable_mask = ENABLE_MASK(1),
+		.enable_val = ENABLE_MASK(1),
+		.disable_val = DISABLE_VAL(1),
+	}},
 	RK817_DESC_SWITCH(/* "SWITCH_REG1", */ "vcc9",
 			  RK817_POWER_EN_REG(3), ENABLE_MASK(2), DISABLE_VAL(2)),
 	RK817_DESC_SWITCH(/* "SWITCH_REG2", */ "vcc8",
-- 
2.30.2