[PATCH 3/4] ARM: zii-imx8mq-dev: include DDR firmware in image

[Lucas Stach <l.stach@pengutronix.de>]

This board uses the legacy DRAM initialization and doesn't call
imx8mq_ddr_init(), so there is no point where the DRAM firmware is
referenced from the image. Fix this by calling ddr_get_firmware()
from the legacy DRAM init.

Fixes: e770d18108de ("ARM: i.MX8M: include only necessary ddrphy firmwares in image")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/boards/zii-imx8mq-dev/ddrphy_train.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boards/zii-imx8mq-dev/ddrphy_train.c b/arch/arm/boards/zii-imx8mq-dev/ddrphy_train.c
index d2c73fc7ce22..e8577369dc8b 100644
--- a/arch/arm/boards/zii-imx8mq-dev/ddrphy_train.c
+++ b/arch/arm/boards/zii-imx8mq-dev/ddrphy_train.c
@@ -11,6 +11,8 @@
 void ddr_cfg_phy(void) {
 	unsigned int tmp, tmp_t;
 
+	ddr_get_firmware(DRAM_TYPE_LPDDR4);
+
 	//Init DDRPHY register...
 	reg32_write(0x3c080440,0x2);
 	reg32_write(0x3c080444,0x3);
-- 
2.38.1