[PATCH 1/3] nvmem: ocotp: add support for second MAC address on i.MX8MP

[PATCH 1/3] nvmem: ocotp: add support for second MAC address on i.MX8MP

[Lucas Stach]

i.MX8MP has the same quirk as the i.MX6UL: the MAC address for the
second ethernet interface is stored at an unaligned location and thus
needs to be handled by skipping the first 2 bytes from the OCOTP
register.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/nvmem/ocotp.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/nvmem/ocotp.c b/drivers/nvmem/ocotp.c
index 7cc2b3b3db58..9d4d6e91db74 100644
--- a/drivers/nvmem/ocotp.c
+++ b/drivers/nvmem/ocotp.c
@@ -88,6 +88,7 @@
 #define MAC_OFFSET_0			(0x22 * 4)
 #define IMX6UL_MAC_OFFSET_1		(0x23 * 4)
 #define MAC_OFFSET_1			(0x24 * 4)
+#define IMX8MP_MAC_OFFSET_1		(0x25 * 4)
 #define MAX_MAC_OFFSETS			2
 #define MAC_BYTES			8
 #define UNIQUE_ID_NUM			2
@@ -598,7 +599,7 @@ static int imx_ocotp_read_mac(const struct imx_ocotp_data *data,
 	if (ret < 0)
 		return ret;
 
-	if (offset != IMX6UL_MAC_OFFSET_1)
+	if (offset != IMX6UL_MAC_OFFSET_1 && offset != IMX8MP_MAC_OFFSET_1)
 		data->format_mac(mac, buf, OCOTP_HW_TO_MAC);
 	else
 		data->format_mac(mac, buf + 2, OCOTP_HW_TO_MAC);
@@ -624,7 +625,8 @@ static int imx_ocotp_set_mac(struct param_d *param, void *priv)
 	if (ret < 0)
 		return ret;
 
-	if (ethaddr->offset != IMX6UL_MAC_OFFSET_1)
+	if (ethaddr->offset != IMX6UL_MAC_OFFSET_1 &&
+	    ethaddr->offset != IMX8MP_MAC_OFFSET_1)
 		ethaddr->data->format_mac(buf, ethaddr->value,
 					  OCOTP_MAC_TO_HW);
 	else
@@ -898,7 +900,7 @@ static struct imx_ocotp_data imx8mp_ocotp_data = {
 	.num_regs = 1024,
 	.addr_to_offset = imx6sl_addr_to_offset,
 	.mac_offsets_num = 2,
-	.mac_offsets = { 0x90, 0x96 },
+	.mac_offsets = { 0x90, 0x94 },
 	.format_mac = imx_ocotp_format_mac,
 	.feat = &imx8mp_featctrl_data,
 };
-- 
2.39.0

[PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location

[Lucas Stach]

All i.MX8MP boards should consult the common fuse locations for the
MAC address of the network interfaces. Also add the second location
for the EQOS network interface.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/dts/imx8mp-evk.dts                | 4 ----
 arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts | 4 ----
 arch/arm/dts/imx8mp.dtsi                   | 1 +
 3 files changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/arm/dts/imx8mp-evk.dts b/arch/arm/dts/imx8mp-evk.dts
index d992b14882a3..28d8c5f9292e 100644
--- a/arch/arm/dts/imx8mp-evk.dts
+++ b/arch/arm/dts/imx8mp-evk.dts
@@ -68,7 +68,3 @@
 		reg = <0xe0000 0x20000>;
 	};
 };
-
-&ocotp {
-	barebox,provide-mac-address = <&fec 0x640>;
-};
diff --git a/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
index c47e7285a703..6e81f58e2786 100644
--- a/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -53,7 +53,3 @@
 		reg = <0xe0000 0x20000>;
 	};
 };
-
-&ocotp {
-	barebox,provide-mac-address = <&fec 0x640>;
-};
diff --git a/arch/arm/dts/imx8mp.dtsi b/arch/arm/dts/imx8mp.dtsi
index 5da79f13d339..379fa49d6042 100644
--- a/arch/arm/dts/imx8mp.dtsi
+++ b/arch/arm/dts/imx8mp.dtsi
@@ -13,6 +13,7 @@
 feat: &ocotp {
 	#feature-cells = <1>;
 	barebox,feature-controller;
+	barebox,provide-mac-address = <&fec 0x640 &eqos 0x650>;
 };
 
 &pgc_mipi_phy1 {
-- 
2.39.0

Re: [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location

[Ahmad Fatoum]

Hello Lucas,

On 11.01.23 19:21, Lucas Stach wrote:
> All i.MX8MP boards should consult the common fuse locations for the
> MAC address of the network interfaces. Also add the second location
> for the EQOS network interface.

Do we really want to extend use of this binding? The upstream kernel
DT already has nvmem-cells for the MAC addresses and we have support
for reading that out. Only thing missing is the equivalent of

Linux commit d0221a780cbc ("nvmem: imx-ocotp: add support for post processing")

Cheers,
Ahmad

> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  arch/arm/dts/imx8mp-evk.dts                | 4 ----
>  arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts | 4 ----
>  arch/arm/dts/imx8mp.dtsi                   | 1 +
>  3 files changed, 1 insertion(+), 8 deletions(-)
> 
> diff --git a/arch/arm/dts/imx8mp-evk.dts b/arch/arm/dts/imx8mp-evk.dts
> index d992b14882a3..28d8c5f9292e 100644
> --- a/arch/arm/dts/imx8mp-evk.dts
> +++ b/arch/arm/dts/imx8mp-evk.dts
> @@ -68,7 +68,3 @@
>  		reg = <0xe0000 0x20000>;
>  	};
>  };
> -
> -&ocotp {
> -	barebox,provide-mac-address = <&fec 0x640>;
> -};
> diff --git a/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
> index c47e7285a703..6e81f58e2786 100644
> --- a/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
> +++ b/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
> @@ -53,7 +53,3 @@
>  		reg = <0xe0000 0x20000>;
>  	};
>  };
> -
> -&ocotp {
> -	barebox,provide-mac-address = <&fec 0x640>;
> -};
> diff --git a/arch/arm/dts/imx8mp.dtsi b/arch/arm/dts/imx8mp.dtsi
> index 5da79f13d339..379fa49d6042 100644
> --- a/arch/arm/dts/imx8mp.dtsi
> +++ b/arch/arm/dts/imx8mp.dtsi
> @@ -13,6 +13,7 @@
>  feat: &ocotp {
>  	#feature-cells = <1>;
>  	barebox,feature-controller;
> +	barebox,provide-mac-address = <&fec 0x640 &eqos 0x650>;
>  };
>  
>  &pgc_mipi_phy1 {

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location

[Lucas Stach]

Hi Ahmad,

Am Mittwoch, dem 11.01.2023 um 20:03 +0100 schrieb Ahmad Fatoum:
> Hello Lucas,
> 
> On 11.01.23 19:21, Lucas Stach wrote:
> > All i.MX8MP boards should consult the common fuse locations for the
> > MAC address of the network interfaces. Also add the second location
> > for the EQOS network interface.
> 
> Do we really want to extend use of this binding? The upstream kernel
> DT already has nvmem-cells for the MAC addresses and we have support
> for reading that out.
> 
I thought about this too, but...

>  Only thing missing is the equivalent of
> 
> Linux commit d0221a780cbc ("nvmem: imx-ocotp: add support for post processing")
> 
This isn't the only thing missing. To handle the second MAC address via
NMEM, we would need to add unaligned read/write support to the OCOTP
driver. The currently used regmap_read/write_bulk API does only work
with register aligned accesses. The benefit of NVMEM didn't look that
tempting anymore when looking at the cost of the necessary OCOTP driver
changes, so I choose to go with the more minimal change.

Regards,
Lucas

> Cheers,
> Ahmad
> 
> > 
> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > ---
> >  arch/arm/dts/imx8mp-evk.dts                | 4 ----
> >  arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts | 4 ----
> >  arch/arm/dts/imx8mp.dtsi                   | 1 +
> >  3 files changed, 1 insertion(+), 8 deletions(-)
> > 
> > diff --git a/arch/arm/dts/imx8mp-evk.dts b/arch/arm/dts/imx8mp-evk.dts
> > index d992b14882a3..28d8c5f9292e 100644
> > --- a/arch/arm/dts/imx8mp-evk.dts
> > +++ b/arch/arm/dts/imx8mp-evk.dts
> > @@ -68,7 +68,3 @@
> >  		reg = <0xe0000 0x20000>;
> >  	};
> >  };
> > -
> > -&ocotp {
> > -	barebox,provide-mac-address = <&fec 0x640>;
> > -};
> > diff --git a/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
> > index c47e7285a703..6e81f58e2786 100644
> > --- a/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
> > +++ b/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
> > @@ -53,7 +53,3 @@
> >  		reg = <0xe0000 0x20000>;
> >  	};
> >  };
> > -
> > -&ocotp {
> > -	barebox,provide-mac-address = <&fec 0x640>;
> > -};
> > diff --git a/arch/arm/dts/imx8mp.dtsi b/arch/arm/dts/imx8mp.dtsi
> > index 5da79f13d339..379fa49d6042 100644
> > --- a/arch/arm/dts/imx8mp.dtsi
> > +++ b/arch/arm/dts/imx8mp.dtsi
> > @@ -13,6 +13,7 @@
> >  feat: &ocotp {
> >  	#feature-cells = <1>;
> >  	barebox,feature-controller;
> > +	barebox,provide-mac-address = <&fec 0x640 &eqos 0x650>;
> >  };
> >  
> >  &pgc_mipi_phy1 {
> 

Re: [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location

[Ahmad Fatoum]

On 11.01.23 21:00, Lucas Stach wrote:
> Hi Ahmad,
> 
> Am Mittwoch, dem 11.01.2023 um 20:03 +0100 schrieb Ahmad Fatoum:
>> Hello Lucas,
>>
>> On 11.01.23 19:21, Lucas Stach wrote:
>>> All i.MX8MP boards should consult the common fuse locations for the
>>> MAC address of the network interfaces. Also add the second location
>>> for the EQOS network interface.
>>
>> Do we really want to extend use of this binding? The upstream kernel
>> DT already has nvmem-cells for the MAC addresses and we have support
>> for reading that out.
>>
> I thought about this too, but...
> 
>>  Only thing missing is the equivalent of
>>
>> Linux commit d0221a780cbc ("nvmem: imx-ocotp: add support for post processing")
>>
> This isn't the only thing missing. To handle the second MAC address via
> NMEM, we would need to add unaligned read/write support to the OCOTP
> driver. The currently used regmap_read/write_bulk API does only work
> with register aligned accesses. The benefit of NVMEM didn't look that
> tempting anymore when looking at the cost of the necessary OCOTP driver
> changes, so I choose to go with the more minimal change.

You can switch the driver over to use nvmem_regmap_register(), which will
take care of the alignment for you. I still think it's worth it.

Cheers,
Ahmad

> 
> Regards,
> Lucas
> 
>> Cheers,
>> Ahmad
>>
>>>
>>> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
>>> ---
>>>  arch/arm/dts/imx8mp-evk.dts                | 4 ----
>>>  arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts | 4 ----
>>>  arch/arm/dts/imx8mp.dtsi                   | 1 +
>>>  3 files changed, 1 insertion(+), 8 deletions(-)
>>>
>>> diff --git a/arch/arm/dts/imx8mp-evk.dts b/arch/arm/dts/imx8mp-evk.dts
>>> index d992b14882a3..28d8c5f9292e 100644
>>> --- a/arch/arm/dts/imx8mp-evk.dts
>>> +++ b/arch/arm/dts/imx8mp-evk.dts
>>> @@ -68,7 +68,3 @@
>>>  		reg = <0xe0000 0x20000>;
>>>  	};
>>>  };
>>> -
>>> -&ocotp {
>>> -	barebox,provide-mac-address = <&fec 0x640>;
>>> -};
>>> diff --git a/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
>>> index c47e7285a703..6e81f58e2786 100644
>>> --- a/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
>>> +++ b/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
>>> @@ -53,7 +53,3 @@
>>>  		reg = <0xe0000 0x20000>;
>>>  	};
>>>  };
>>> -
>>> -&ocotp {
>>> -	barebox,provide-mac-address = <&fec 0x640>;
>>> -};
>>> diff --git a/arch/arm/dts/imx8mp.dtsi b/arch/arm/dts/imx8mp.dtsi
>>> index 5da79f13d339..379fa49d6042 100644
>>> --- a/arch/arm/dts/imx8mp.dtsi
>>> +++ b/arch/arm/dts/imx8mp.dtsi
>>> @@ -13,6 +13,7 @@
>>>  feat: &ocotp {
>>>  	#feature-cells = <1>;
>>>  	barebox,feature-controller;
>>> +	barebox,provide-mac-address = <&fec 0x640 &eqos 0x650>;
>>>  };
>>>  
>>>  &pgc_mipi_phy1 {
>>
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location

[Lucas Stach]

Am Mittwoch, dem 11.01.2023 um 21:13 +0100 schrieb Ahmad Fatoum:
> On 11.01.23 21:00, Lucas Stach wrote:
> > Hi Ahmad,
> > 
> > Am Mittwoch, dem 11.01.2023 um 20:03 +0100 schrieb Ahmad Fatoum:
> > > Hello Lucas,
> > > 
> > > On 11.01.23 19:21, Lucas Stach wrote:
> > > > All i.MX8MP boards should consult the common fuse locations for the
> > > > MAC address of the network interfaces. Also add the second location
> > > > for the EQOS network interface.
> > > 
> > > Do we really want to extend use of this binding? The upstream kernel
> > > DT already has nvmem-cells for the MAC addresses and we have support
> > > for reading that out.
> > > 
> > I thought about this too, but...
> > 
> > >  Only thing missing is the equivalent of
> > > 
> > > Linux commit d0221a780cbc ("nvmem: imx-ocotp: add support for post processing")
> > > 
> > This isn't the only thing missing. To handle the second MAC address via
> > NMEM, we would need to add unaligned read/write support to the OCOTP
> > driver. The currently used regmap_read/write_bulk API does only work
> > with register aligned accesses. The benefit of NVMEM didn't look that
> > tempting anymore when looking at the cost of the necessary OCOTP driver
> > changes, so I choose to go with the more minimal change.
> 
> You can switch the driver over to use nvmem_regmap_register(), which will
> take care of the alignment for you. I still think it's worth it.
> 
Thanks, didn't know about this one. I'll take a stab at converting the
OCOTP driver.

Regards,
Lucas

> Cheers,
> Ahmad
> 
> > 
> > Regards,
> > Lucas
> > 
> > > Cheers,
> > > Ahmad
> > > 
> > > > 
> > > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > > > ---
> > > >  arch/arm/dts/imx8mp-evk.dts                | 4 ----
> > > >  arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts | 4 ----
> > > >  arch/arm/dts/imx8mp.dtsi                   | 1 +
> > > >  3 files changed, 1 insertion(+), 8 deletions(-)
> > > > 
> > > > diff --git a/arch/arm/dts/imx8mp-evk.dts b/arch/arm/dts/imx8mp-evk.dts
> > > > index d992b14882a3..28d8c5f9292e 100644
> > > > --- a/arch/arm/dts/imx8mp-evk.dts
> > > > +++ b/arch/arm/dts/imx8mp-evk.dts
> > > > @@ -68,7 +68,3 @@
> > > >  		reg = <0xe0000 0x20000>;
> > > >  	};
> > > >  };
> > > > -
> > > > -&ocotp {
> > > > -	barebox,provide-mac-address = <&fec 0x640>;
> > > > -};
> > > > diff --git a/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
> > > > index c47e7285a703..6e81f58e2786 100644
> > > > --- a/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
> > > > +++ b/arch/arm/dts/imx8mp-tqma8mpql-mba8mpxl.dts
> > > > @@ -53,7 +53,3 @@
> > > >  		reg = <0xe0000 0x20000>;
> > > >  	};
> > > >  };
> > > > -
> > > > -&ocotp {
> > > > -	barebox,provide-mac-address = <&fec 0x640>;
> > > > -};
> > > > diff --git a/arch/arm/dts/imx8mp.dtsi b/arch/arm/dts/imx8mp.dtsi
> > > > index 5da79f13d339..379fa49d6042 100644
> > > > --- a/arch/arm/dts/imx8mp.dtsi
> > > > +++ b/arch/arm/dts/imx8mp.dtsi
> > > > @@ -13,6 +13,7 @@
> > > >  feat: &ocotp {
> > > >  	#feature-cells = <1>;
> > > >  	barebox,feature-controller;
> > > > +	barebox,provide-mac-address = <&fec 0x640 &eqos 0x650>;
> > > >  };
> > > >  
> > > >  &pgc_mipi_phy1 {
> > > 
> > 
> > 
> 

[PATCH 3/3] net: eqos: add i.MX8MP support

[Lucas Stach]

This adds the platform glue for the Designware EQOS ethernet interface
as implemented on the i.MX8MP SoC.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/net/Kconfig           |   8 ++
 drivers/net/Makefile          |   1 +
 drivers/net/designware_imx8.c | 194 ++++++++++++++++++++++++++++++++++
 3 files changed, 203 insertions(+)
 create mode 100644 drivers/net/designware_imx8.c

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2dafd9c7a8b9..e871b7e11af7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -107,6 +107,14 @@ config DRIVER_NET_DESIGNWARE_EQOS
 	  This option enables support for the Synopsys
 	  Designware Ethernet Quality-of-Service (GMAC4).
 
+config DRIVER_NET_DESIGNWARE_IMX8
+	bool "Designware EQOS i.MX8 Ethernet driver"
+	depends on HAS_DMA && COMMON_CLK && OFTREE && (ARCH_IMX8M || COMPILE_TEST)
+	select DRIVER_NET_DESIGNWARE_EQOS
+	help
+	  This option enables support for the Designware EQOS MAC implemented on
+	  the NXP i.MX8 SoCs.
+
 config DRIVER_NET_DESIGNWARE_STM32
 	bool "STM32 Designware Ethernet driver"
 	depends on HAS_DMA && COMMON_CLK && OFTREE && (ARCH_STM32MP || COMPILE_TEST)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 7ff330a2bf42..6a44a12bf88a 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_DRIVER_NET_DESIGNWARE_GENERIC) += designware_generic.o
 obj-$(CONFIG_DRIVER_NET_DESIGNWARE_SOCFPGA) += designware_socfpga.o
 obj-$(CONFIG_DRIVER_NET_DESIGNWARE_STARFIVE) += designware_starfive.o
 obj-$(CONFIG_DRIVER_NET_DESIGNWARE_EQOS) += designware_eqos.o
+obj-$(CONFIG_DRIVER_NET_DESIGNWARE_IMX8) += designware_imx8.o
 obj-$(CONFIG_DRIVER_NET_DESIGNWARE_STM32) += designware_stm32.o
 obj-$(CONFIG_DRIVER_NET_DESIGNWARE_TEGRA186) += designware_tegra186.o
 obj-$(CONFIG_DRIVER_NET_DESIGNWARE_ROCKCHIP) += designware_rockchip.o
diff --git a/drivers/net/designware_imx8.c b/drivers/net/designware_imx8.c
new file mode 100644
index 000000000000..e64fc57c3e13
--- /dev/null
+++ b/drivers/net/designware_imx8.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <common.h>
+#include <init.h>
+#include <net.h>
+#include <regmap.h>
+#include <mfd/syscon.h>
+#include <linux/clk.h>
+
+#include "designware_eqos.h"
+
+#define GPR_ENET_QOS_INTF_MODE_MASK	GENMASK(21, 16)
+#define GPR_ENET_QOS_INTF_SEL_MII	(0x0 << 16)
+#define GPR_ENET_QOS_INTF_SEL_RGMII	(0x1 << 16)
+#define GPR_ENET_QOS_INTF_SEL_RMII	(0x4 << 16)
+#define GPR_ENET_QOS_CLK_GEN_EN		BIT(19)
+#define GPR_ENET_QOS_CLK_TX_CLK_SEL	BIT(20)
+#define GPR_ENET_QOS_RGMII_EN		BIT(21)
+
+
+struct eqos_imx8_priv {
+	struct device_d *dev;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	struct regmap *intf_regmap;
+	u32 intf_reg_off;
+	bool rmii_refclk_ext;
+};
+
+enum { CLK_STMMACETH, CLK_PCLK, CLK_PTP_REF, CLK_TX};
+static const struct clk_bulk_data imx8_clks[] = {
+	[CLK_STMMACETH] = { .id = "stmmaceth" },
+	[CLK_PCLK]      = { .id = "pclk" },
+	[CLK_PTP_REF]   = { .id = "ptp_ref" },
+	[CLK_TX]        = { .id = "tx" },
+};
+
+static unsigned long eqos_get_csr_clk_rate_imx8(struct eqos *eqos)
+{
+	struct eqos_imx8_priv *priv = eqos->priv;
+
+	return clk_get_rate(priv->clks[CLK_PCLK].clk);
+}
+
+
+static void eqos_adjust_link_imx8(struct eth_device *edev)
+{
+	struct eqos *eqos = edev->priv;
+	struct eqos_imx8_priv *priv = eqos->priv;
+	unsigned long rate;
+	int ret;
+
+	switch (edev->phydev->speed) {
+	case SPEED_10:
+		rate = 2500000;
+		break;
+	case SPEED_100:
+		rate = 25000000;
+		break;
+	case SPEED_1000:
+		rate = 125000000;
+		break;
+	default:
+		dev_err(priv->dev, "unknown speed value for GMAC speed=%d",
+			edev->phydev->speed);
+		return;
+	}
+
+	ret = clk_set_rate(priv->clks[CLK_TX].clk, rate);
+	if (ret)
+		dev_err(priv->dev, "set TX clk rate %ld failed %d\n",
+			rate, ret);
+
+	eqos_adjust_link(edev);
+}
+
+static void eqos_imx8_set_interface_mode(struct eqos *eqos)
+{
+	struct eqos_imx8_priv *priv = eqos->priv;
+	struct device_node *np = priv->dev->device_node;
+	int val;
+
+	if (!of_device_is_compatible(np, "nxp,imx8mp-dwmac-eqos"))
+		return;
+
+	switch (eqos->interface) {
+	case PHY_INTERFACE_MODE_MII:
+		val = GPR_ENET_QOS_INTF_SEL_MII;
+		break;
+	case PHY_INTERFACE_MODE_RMII:
+		val = GPR_ENET_QOS_INTF_SEL_RMII;
+		val |= (priv->rmii_refclk_ext ? 0 : GPR_ENET_QOS_CLK_TX_CLK_SEL);
+		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		val = GPR_ENET_QOS_INTF_SEL_RGMII |
+		      GPR_ENET_QOS_RGMII_EN;
+		break;
+	default:
+		dev_err(priv->dev, "no valid interface mode found!\n");
+		return;
+	}
+
+	val |= GPR_ENET_QOS_CLK_GEN_EN;
+
+	regmap_update_bits(priv->intf_regmap, priv->intf_reg_off,
+			   GPR_ENET_QOS_INTF_MODE_MASK, val);
+}
+
+static int eqos_init_imx8(struct device_d *dev, struct eqos *eqos)
+{
+	struct device_node *np = dev->device_node;
+	struct eqos_imx8_priv *priv = eqos->priv;
+	int ret;
+
+	priv->dev = dev;
+
+	if (of_get_property(np, "snps,rmii_refclk_ext", NULL))
+		priv->rmii_refclk_ext = true;
+
+	if (of_device_is_compatible(np, "nxp,imx8mp-dwmac-eqos")) {
+		priv->intf_regmap = syscon_regmap_lookup_by_phandle(np, "intf_mode");
+		if (IS_ERR(priv->intf_regmap))
+			return PTR_ERR(priv->intf_regmap);
+
+		ret = of_property_read_u32_index(np, "intf_mode", 1, &priv->intf_reg_off);
+		if (ret) {
+			dev_err(dev, "Can't get intf mode reg offset (%d)\n", ret);
+			return ret;
+		}
+	}
+
+	priv->num_clks = ARRAY_SIZE(imx8_clks);
+	priv->clks = xmalloc(priv->num_clks * sizeof(*priv->clks));
+	memcpy(priv->clks, imx8_clks, sizeof imx8_clks);
+
+	ret = clk_bulk_get(dev, priv->num_clks, priv->clks);
+	if (ret) {
+		dev_err(dev, "Failed to get clks: %s\n", strerror(-ret));
+		return ret;
+	}
+
+	ret = clk_bulk_enable(priv->num_clks, priv->clks);
+	if (ret) {
+		dev_err(dev, "Failed to enable clks: %s\n", strerror(-ret));
+		return ret;
+	}
+
+	eqos_imx8_set_interface_mode(eqos);
+
+	return 0;
+}
+
+static struct eqos_ops imx8_ops = {
+	.init = eqos_init_imx8,
+	.get_ethaddr = eqos_get_ethaddr,
+	.set_ethaddr = eqos_set_ethaddr,
+	.adjust_link = eqos_adjust_link_imx8,
+	.get_csr_clk_rate = eqos_get_csr_clk_rate_imx8,
+
+	.clk_csr = EQOS_MDIO_ADDR_CR_250_300,
+	.config_mac = EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_DCB,
+};
+
+static int eqos_probe_imx8(struct device_d *dev)
+{
+	return eqos_probe(dev, &imx8_ops, xzalloc(sizeof(struct eqos_imx8_priv)));
+}
+
+static void eqos_remove_imx8(struct device_d *dev)
+{
+	struct eqos *eqos = dev->priv;
+	struct eqos_imx8_priv *priv = eqos->priv;
+
+	eqos_remove(dev);
+
+	clk_bulk_disable(priv->num_clks, priv->clks);
+	clk_bulk_put(priv->num_clks, priv->clks);
+}
+
+static __maybe_unused struct of_device_id eqos_imx8_ids[] = {
+	{ .compatible = "nxp,imx8mp-dwmac-eqos"},
+	{ /* sentinel */ }
+};
+
+static struct driver_d eqos_imx8_driver = {
+	.name = "eqos-imx8",
+	.probe = eqos_probe_imx8,
+	.remove = eqos_remove_imx8,
+	.of_compatible = DRV_OF_COMPAT(eqos_imx8_ids),
+};
+device_platform_driver(eqos_imx8_driver);
-- 
2.39.0

Re: [PATCH 3/3] net: eqos: add i.MX8MP support

[Ahmad Fatoum]

On 11.01.23 19:21, Lucas Stach wrote:
> This adds the platform glue for the Designware EQOS ethernet interface
> as implemented on the i.MX8MP SoC.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

> ---
>  drivers/net/Kconfig           |   8 ++
>  drivers/net/Makefile          |   1 +
>  drivers/net/designware_imx8.c | 194 ++++++++++++++++++++++++++++++++++
>  3 files changed, 203 insertions(+)
>  create mode 100644 drivers/net/designware_imx8.c
> 
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 2dafd9c7a8b9..e871b7e11af7 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -107,6 +107,14 @@ config DRIVER_NET_DESIGNWARE_EQOS
>  	  This option enables support for the Synopsys
>  	  Designware Ethernet Quality-of-Service (GMAC4).
>  
> +config DRIVER_NET_DESIGNWARE_IMX8
> +	bool "Designware EQOS i.MX8 Ethernet driver"
> +	depends on HAS_DMA && COMMON_CLK && OFTREE && (ARCH_IMX8M || COMPILE_TEST)
> +	select DRIVER_NET_DESIGNWARE_EQOS
> +	help
> +	  This option enables support for the Designware EQOS MAC implemented on
> +	  the NXP i.MX8 SoCs.
> +
>  config DRIVER_NET_DESIGNWARE_STM32
>  	bool "STM32 Designware Ethernet driver"
>  	depends on HAS_DMA && COMMON_CLK && OFTREE && (ARCH_STM32MP || COMPILE_TEST)
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 7ff330a2bf42..6a44a12bf88a 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_DRIVER_NET_DESIGNWARE_GENERIC) += designware_generic.o
>  obj-$(CONFIG_DRIVER_NET_DESIGNWARE_SOCFPGA) += designware_socfpga.o
>  obj-$(CONFIG_DRIVER_NET_DESIGNWARE_STARFIVE) += designware_starfive.o
>  obj-$(CONFIG_DRIVER_NET_DESIGNWARE_EQOS) += designware_eqos.o
> +obj-$(CONFIG_DRIVER_NET_DESIGNWARE_IMX8) += designware_imx8.o
>  obj-$(CONFIG_DRIVER_NET_DESIGNWARE_STM32) += designware_stm32.o
>  obj-$(CONFIG_DRIVER_NET_DESIGNWARE_TEGRA186) += designware_tegra186.o
>  obj-$(CONFIG_DRIVER_NET_DESIGNWARE_ROCKCHIP) += designware_rockchip.o
> diff --git a/drivers/net/designware_imx8.c b/drivers/net/designware_imx8.c
> new file mode 100644
> index 000000000000..e64fc57c3e13
> --- /dev/null
> +++ b/drivers/net/designware_imx8.c
> @@ -0,0 +1,194 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <common.h>
> +#include <init.h>
> +#include <net.h>
> +#include <regmap.h>
> +#include <mfd/syscon.h>
> +#include <linux/clk.h>
> +
> +#include "designware_eqos.h"
> +
> +#define GPR_ENET_QOS_INTF_MODE_MASK	GENMASK(21, 16)
> +#define GPR_ENET_QOS_INTF_SEL_MII	(0x0 << 16)
> +#define GPR_ENET_QOS_INTF_SEL_RGMII	(0x1 << 16)
> +#define GPR_ENET_QOS_INTF_SEL_RMII	(0x4 << 16)
> +#define GPR_ENET_QOS_CLK_GEN_EN		BIT(19)
> +#define GPR_ENET_QOS_CLK_TX_CLK_SEL	BIT(20)
> +#define GPR_ENET_QOS_RGMII_EN		BIT(21)
> +
> +
> +struct eqos_imx8_priv {
> +	struct device_d *dev;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +	struct regmap *intf_regmap;
> +	u32 intf_reg_off;
> +	bool rmii_refclk_ext;
> +};
> +
> +enum { CLK_STMMACETH, CLK_PCLK, CLK_PTP_REF, CLK_TX};
> +static const struct clk_bulk_data imx8_clks[] = {
> +	[CLK_STMMACETH] = { .id = "stmmaceth" },
> +	[CLK_PCLK]      = { .id = "pclk" },
> +	[CLK_PTP_REF]   = { .id = "ptp_ref" },
> +	[CLK_TX]        = { .id = "tx" },
> +};
> +
> +static unsigned long eqos_get_csr_clk_rate_imx8(struct eqos *eqos)
> +{
> +	struct eqos_imx8_priv *priv = eqos->priv;
> +
> +	return clk_get_rate(priv->clks[CLK_PCLK].clk);
> +}
> +
> +
> +static void eqos_adjust_link_imx8(struct eth_device *edev)
> +{
> +	struct eqos *eqos = edev->priv;
> +	struct eqos_imx8_priv *priv = eqos->priv;
> +	unsigned long rate;
> +	int ret;
> +
> +	switch (edev->phydev->speed) {
> +	case SPEED_10:
> +		rate = 2500000;
> +		break;
> +	case SPEED_100:
> +		rate = 25000000;
> +		break;
> +	case SPEED_1000:
> +		rate = 125000000;
> +		break;
> +	default:
> +		dev_err(priv->dev, "unknown speed value for GMAC speed=%d",
> +			edev->phydev->speed);
> +		return;
> +	}
> +
> +	ret = clk_set_rate(priv->clks[CLK_TX].clk, rate);
> +	if (ret)
> +		dev_err(priv->dev, "set TX clk rate %ld failed %d\n",
> +			rate, ret);
> +
> +	eqos_adjust_link(edev);
> +}
> +
> +static void eqos_imx8_set_interface_mode(struct eqos *eqos)
> +{
> +	struct eqos_imx8_priv *priv = eqos->priv;
> +	struct device_node *np = priv->dev->device_node;
> +	int val;
> +
> +	if (!of_device_is_compatible(np, "nxp,imx8mp-dwmac-eqos"))
> +		return;
> +
> +	switch (eqos->interface) {
> +	case PHY_INTERFACE_MODE_MII:
> +		val = GPR_ENET_QOS_INTF_SEL_MII;
> +		break;
> +	case PHY_INTERFACE_MODE_RMII:
> +		val = GPR_ENET_QOS_INTF_SEL_RMII;
> +		val |= (priv->rmii_refclk_ext ? 0 : GPR_ENET_QOS_CLK_TX_CLK_SEL);
> +		break;
> +	case PHY_INTERFACE_MODE_RGMII:
> +	case PHY_INTERFACE_MODE_RGMII_ID:
> +	case PHY_INTERFACE_MODE_RGMII_RXID:
> +	case PHY_INTERFACE_MODE_RGMII_TXID:
> +		val = GPR_ENET_QOS_INTF_SEL_RGMII |
> +		      GPR_ENET_QOS_RGMII_EN;
> +		break;
> +	default:
> +		dev_err(priv->dev, "no valid interface mode found!\n");
> +		return;
> +	}
> +
> +	val |= GPR_ENET_QOS_CLK_GEN_EN;
> +
> +	regmap_update_bits(priv->intf_regmap, priv->intf_reg_off,
> +			   GPR_ENET_QOS_INTF_MODE_MASK, val);
> +}
> +
> +static int eqos_init_imx8(struct device_d *dev, struct eqos *eqos)
> +{
> +	struct device_node *np = dev->device_node;
> +	struct eqos_imx8_priv *priv = eqos->priv;
> +	int ret;
> +
> +	priv->dev = dev;
> +
> +	if (of_get_property(np, "snps,rmii_refclk_ext", NULL))
> +		priv->rmii_refclk_ext = true;
> +
> +	if (of_device_is_compatible(np, "nxp,imx8mp-dwmac-eqos")) {
> +		priv->intf_regmap = syscon_regmap_lookup_by_phandle(np, "intf_mode");
> +		if (IS_ERR(priv->intf_regmap))
> +			return PTR_ERR(priv->intf_regmap);
> +
> +		ret = of_property_read_u32_index(np, "intf_mode", 1, &priv->intf_reg_off);
> +		if (ret) {
> +			dev_err(dev, "Can't get intf mode reg offset (%d)\n", ret);
> +			return ret;
> +		}
> +	}
> +
> +	priv->num_clks = ARRAY_SIZE(imx8_clks);
> +	priv->clks = xmalloc(priv->num_clks * sizeof(*priv->clks));
> +	memcpy(priv->clks, imx8_clks, sizeof imx8_clks);
> +
> +	ret = clk_bulk_get(dev, priv->num_clks, priv->clks);
> +	if (ret) {
> +		dev_err(dev, "Failed to get clks: %s\n", strerror(-ret));
> +		return ret;
> +	}
> +
> +	ret = clk_bulk_enable(priv->num_clks, priv->clks);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable clks: %s\n", strerror(-ret));
> +		return ret;
> +	}
> +
> +	eqos_imx8_set_interface_mode(eqos);
> +
> +	return 0;
> +}
> +
> +static struct eqos_ops imx8_ops = {
> +	.init = eqos_init_imx8,
> +	.get_ethaddr = eqos_get_ethaddr,
> +	.set_ethaddr = eqos_set_ethaddr,
> +	.adjust_link = eqos_adjust_link_imx8,
> +	.get_csr_clk_rate = eqos_get_csr_clk_rate_imx8,
> +
> +	.clk_csr = EQOS_MDIO_ADDR_CR_250_300,
> +	.config_mac = EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_DCB,
> +};
> +
> +static int eqos_probe_imx8(struct device_d *dev)
> +{
> +	return eqos_probe(dev, &imx8_ops, xzalloc(sizeof(struct eqos_imx8_priv)));
> +}
> +
> +static void eqos_remove_imx8(struct device_d *dev)
> +{
> +	struct eqos *eqos = dev->priv;
> +	struct eqos_imx8_priv *priv = eqos->priv;
> +
> +	eqos_remove(dev);
> +
> +	clk_bulk_disable(priv->num_clks, priv->clks);
> +	clk_bulk_put(priv->num_clks, priv->clks);
> +}
> +
> +static __maybe_unused struct of_device_id eqos_imx8_ids[] = {
> +	{ .compatible = "nxp,imx8mp-dwmac-eqos"},
> +	{ /* sentinel */ }
> +};
> +
> +static struct driver_d eqos_imx8_driver = {
> +	.name = "eqos-imx8",
> +	.probe = eqos_probe_imx8,
> +	.remove = eqos_remove_imx8,
> +	.of_compatible = DRV_OF_COMPAT(eqos_imx8_ids),
> +};
> +device_platform_driver(eqos_imx8_driver);

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 1/3] nvmem: ocotp: add support for second MAC address on i.MX8MP

[Sascha Hauer]

On Wed, Jan 11, 2023 at 07:21:55PM +0100, Lucas Stach wrote:
> i.MX8MP has the same quirk as the i.MX6UL: the MAC address for the
> second ethernet interface is stored at an unaligned location and thus
> needs to be handled by skipping the first 2 bytes from the OCOTP
> register.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  drivers/nvmem/ocotp.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)

Applied 1/3 and 3/3 for now.

Sascha

> 
> diff --git a/drivers/nvmem/ocotp.c b/drivers/nvmem/ocotp.c
> index 7cc2b3b3db58..9d4d6e91db74 100644
> --- a/drivers/nvmem/ocotp.c
> +++ b/drivers/nvmem/ocotp.c
> @@ -88,6 +88,7 @@
>  #define MAC_OFFSET_0			(0x22 * 4)
>  #define IMX6UL_MAC_OFFSET_1		(0x23 * 4)
>  #define MAC_OFFSET_1			(0x24 * 4)
> +#define IMX8MP_MAC_OFFSET_1		(0x25 * 4)
>  #define MAX_MAC_OFFSETS			2
>  #define MAC_BYTES			8
>  #define UNIQUE_ID_NUM			2
> @@ -598,7 +599,7 @@ static int imx_ocotp_read_mac(const struct imx_ocotp_data *data,
>  	if (ret < 0)
>  		return ret;
>  
> -	if (offset != IMX6UL_MAC_OFFSET_1)
> +	if (offset != IMX6UL_MAC_OFFSET_1 && offset != IMX8MP_MAC_OFFSET_1)
>  		data->format_mac(mac, buf, OCOTP_HW_TO_MAC);
>  	else
>  		data->format_mac(mac, buf + 2, OCOTP_HW_TO_MAC);
> @@ -624,7 +625,8 @@ static int imx_ocotp_set_mac(struct param_d *param, void *priv)
>  	if (ret < 0)
>  		return ret;
>  
> -	if (ethaddr->offset != IMX6UL_MAC_OFFSET_1)
> +	if (ethaddr->offset != IMX6UL_MAC_OFFSET_1 &&
> +	    ethaddr->offset != IMX8MP_MAC_OFFSET_1)
>  		ethaddr->data->format_mac(buf, ethaddr->value,
>  					  OCOTP_MAC_TO_HW);
>  	else
> @@ -898,7 +900,7 @@ static struct imx_ocotp_data imx8mp_ocotp_data = {
>  	.num_regs = 1024,
>  	.addr_to_offset = imx6sl_addr_to_offset,
>  	.mac_offsets_num = 2,
> -	.mac_offsets = { 0x90, 0x96 },
> +	.mac_offsets = { 0x90, 0x94 },
>  	.format_mac = imx_ocotp_format_mac,
>  	.feat = &imx8mp_featctrl_data,
>  };
> -- 
> 2.39.0
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |