From: Lucas Stach <l.stach@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 3/3] net: eqos: add i.MX8MP support
Date: Wed, 11 Jan 2023 19:21:57 +0100 [thread overview]
Message-ID: <20230111182157.1702865-3-l.stach@pengutronix.de> (raw)
In-Reply-To: <20230111182157.1702865-1-l.stach@pengutronix.de>
This adds the platform glue for the Designware EQOS ethernet interface
as implemented on the i.MX8MP SoC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
drivers/net/Kconfig | 8 ++
drivers/net/Makefile | 1 +
drivers/net/designware_imx8.c | 194 ++++++++++++++++++++++++++++++++++
3 files changed, 203 insertions(+)
create mode 100644 drivers/net/designware_imx8.c
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2dafd9c7a8b9..e871b7e11af7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -107,6 +107,14 @@ config DRIVER_NET_DESIGNWARE_EQOS
This option enables support for the Synopsys
Designware Ethernet Quality-of-Service (GMAC4).
+config DRIVER_NET_DESIGNWARE_IMX8
+ bool "Designware EQOS i.MX8 Ethernet driver"
+ depends on HAS_DMA && COMMON_CLK && OFTREE && (ARCH_IMX8M || COMPILE_TEST)
+ select DRIVER_NET_DESIGNWARE_EQOS
+ help
+ This option enables support for the Designware EQOS MAC implemented on
+ the NXP i.MX8 SoCs.
+
config DRIVER_NET_DESIGNWARE_STM32
bool "STM32 Designware Ethernet driver"
depends on HAS_DMA && COMMON_CLK && OFTREE && (ARCH_STM32MP || COMPILE_TEST)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 7ff330a2bf42..6a44a12bf88a 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_DRIVER_NET_DESIGNWARE_GENERIC) += designware_generic.o
obj-$(CONFIG_DRIVER_NET_DESIGNWARE_SOCFPGA) += designware_socfpga.o
obj-$(CONFIG_DRIVER_NET_DESIGNWARE_STARFIVE) += designware_starfive.o
obj-$(CONFIG_DRIVER_NET_DESIGNWARE_EQOS) += designware_eqos.o
+obj-$(CONFIG_DRIVER_NET_DESIGNWARE_IMX8) += designware_imx8.o
obj-$(CONFIG_DRIVER_NET_DESIGNWARE_STM32) += designware_stm32.o
obj-$(CONFIG_DRIVER_NET_DESIGNWARE_TEGRA186) += designware_tegra186.o
obj-$(CONFIG_DRIVER_NET_DESIGNWARE_ROCKCHIP) += designware_rockchip.o
diff --git a/drivers/net/designware_imx8.c b/drivers/net/designware_imx8.c
new file mode 100644
index 000000000000..e64fc57c3e13
--- /dev/null
+++ b/drivers/net/designware_imx8.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <common.h>
+#include <init.h>
+#include <net.h>
+#include <regmap.h>
+#include <mfd/syscon.h>
+#include <linux/clk.h>
+
+#include "designware_eqos.h"
+
+#define GPR_ENET_QOS_INTF_MODE_MASK GENMASK(21, 16)
+#define GPR_ENET_QOS_INTF_SEL_MII (0x0 << 16)
+#define GPR_ENET_QOS_INTF_SEL_RGMII (0x1 << 16)
+#define GPR_ENET_QOS_INTF_SEL_RMII (0x4 << 16)
+#define GPR_ENET_QOS_CLK_GEN_EN BIT(19)
+#define GPR_ENET_QOS_CLK_TX_CLK_SEL BIT(20)
+#define GPR_ENET_QOS_RGMII_EN BIT(21)
+
+
+struct eqos_imx8_priv {
+ struct device_d *dev;
+ struct clk_bulk_data *clks;
+ int num_clks;
+ struct regmap *intf_regmap;
+ u32 intf_reg_off;
+ bool rmii_refclk_ext;
+};
+
+enum { CLK_STMMACETH, CLK_PCLK, CLK_PTP_REF, CLK_TX};
+static const struct clk_bulk_data imx8_clks[] = {
+ [CLK_STMMACETH] = { .id = "stmmaceth" },
+ [CLK_PCLK] = { .id = "pclk" },
+ [CLK_PTP_REF] = { .id = "ptp_ref" },
+ [CLK_TX] = { .id = "tx" },
+};
+
+static unsigned long eqos_get_csr_clk_rate_imx8(struct eqos *eqos)
+{
+ struct eqos_imx8_priv *priv = eqos->priv;
+
+ return clk_get_rate(priv->clks[CLK_PCLK].clk);
+}
+
+
+static void eqos_adjust_link_imx8(struct eth_device *edev)
+{
+ struct eqos *eqos = edev->priv;
+ struct eqos_imx8_priv *priv = eqos->priv;
+ unsigned long rate;
+ int ret;
+
+ switch (edev->phydev->speed) {
+ case SPEED_10:
+ rate = 2500000;
+ break;
+ case SPEED_100:
+ rate = 25000000;
+ break;
+ case SPEED_1000:
+ rate = 125000000;
+ break;
+ default:
+ dev_err(priv->dev, "unknown speed value for GMAC speed=%d",
+ edev->phydev->speed);
+ return;
+ }
+
+ ret = clk_set_rate(priv->clks[CLK_TX].clk, rate);
+ if (ret)
+ dev_err(priv->dev, "set TX clk rate %ld failed %d\n",
+ rate, ret);
+
+ eqos_adjust_link(edev);
+}
+
+static void eqos_imx8_set_interface_mode(struct eqos *eqos)
+{
+ struct eqos_imx8_priv *priv = eqos->priv;
+ struct device_node *np = priv->dev->device_node;
+ int val;
+
+ if (!of_device_is_compatible(np, "nxp,imx8mp-dwmac-eqos"))
+ return;
+
+ switch (eqos->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ val = GPR_ENET_QOS_INTF_SEL_MII;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ val = GPR_ENET_QOS_INTF_SEL_RMII;
+ val |= (priv->rmii_refclk_ext ? 0 : GPR_ENET_QOS_CLK_TX_CLK_SEL);
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ val = GPR_ENET_QOS_INTF_SEL_RGMII |
+ GPR_ENET_QOS_RGMII_EN;
+ break;
+ default:
+ dev_err(priv->dev, "no valid interface mode found!\n");
+ return;
+ }
+
+ val |= GPR_ENET_QOS_CLK_GEN_EN;
+
+ regmap_update_bits(priv->intf_regmap, priv->intf_reg_off,
+ GPR_ENET_QOS_INTF_MODE_MASK, val);
+}
+
+static int eqos_init_imx8(struct device_d *dev, struct eqos *eqos)
+{
+ struct device_node *np = dev->device_node;
+ struct eqos_imx8_priv *priv = eqos->priv;
+ int ret;
+
+ priv->dev = dev;
+
+ if (of_get_property(np, "snps,rmii_refclk_ext", NULL))
+ priv->rmii_refclk_ext = true;
+
+ if (of_device_is_compatible(np, "nxp,imx8mp-dwmac-eqos")) {
+ priv->intf_regmap = syscon_regmap_lookup_by_phandle(np, "intf_mode");
+ if (IS_ERR(priv->intf_regmap))
+ return PTR_ERR(priv->intf_regmap);
+
+ ret = of_property_read_u32_index(np, "intf_mode", 1, &priv->intf_reg_off);
+ if (ret) {
+ dev_err(dev, "Can't get intf mode reg offset (%d)\n", ret);
+ return ret;
+ }
+ }
+
+ priv->num_clks = ARRAY_SIZE(imx8_clks);
+ priv->clks = xmalloc(priv->num_clks * sizeof(*priv->clks));
+ memcpy(priv->clks, imx8_clks, sizeof imx8_clks);
+
+ ret = clk_bulk_get(dev, priv->num_clks, priv->clks);
+ if (ret) {
+ dev_err(dev, "Failed to get clks: %s\n", strerror(-ret));
+ return ret;
+ }
+
+ ret = clk_bulk_enable(priv->num_clks, priv->clks);
+ if (ret) {
+ dev_err(dev, "Failed to enable clks: %s\n", strerror(-ret));
+ return ret;
+ }
+
+ eqos_imx8_set_interface_mode(eqos);
+
+ return 0;
+}
+
+static struct eqos_ops imx8_ops = {
+ .init = eqos_init_imx8,
+ .get_ethaddr = eqos_get_ethaddr,
+ .set_ethaddr = eqos_set_ethaddr,
+ .adjust_link = eqos_adjust_link_imx8,
+ .get_csr_clk_rate = eqos_get_csr_clk_rate_imx8,
+
+ .clk_csr = EQOS_MDIO_ADDR_CR_250_300,
+ .config_mac = EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_DCB,
+};
+
+static int eqos_probe_imx8(struct device_d *dev)
+{
+ return eqos_probe(dev, &imx8_ops, xzalloc(sizeof(struct eqos_imx8_priv)));
+}
+
+static void eqos_remove_imx8(struct device_d *dev)
+{
+ struct eqos *eqos = dev->priv;
+ struct eqos_imx8_priv *priv = eqos->priv;
+
+ eqos_remove(dev);
+
+ clk_bulk_disable(priv->num_clks, priv->clks);
+ clk_bulk_put(priv->num_clks, priv->clks);
+}
+
+static __maybe_unused struct of_device_id eqos_imx8_ids[] = {
+ { .compatible = "nxp,imx8mp-dwmac-eqos"},
+ { /* sentinel */ }
+};
+
+static struct driver_d eqos_imx8_driver = {
+ .name = "eqos-imx8",
+ .probe = eqos_probe_imx8,
+ .remove = eqos_remove_imx8,
+ .of_compatible = DRV_OF_COMPAT(eqos_imx8_ids),
+};
+device_platform_driver(eqos_imx8_driver);
--
2.39.0
next prev parent reply other threads:[~2023-01-11 18:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-11 18:21 [PATCH 1/3] nvmem: ocotp: add support for second MAC address on i.MX8MP Lucas Stach
2023-01-11 18:21 ` [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location Lucas Stach
2023-01-11 19:03 ` Ahmad Fatoum
2023-01-11 20:00 ` Lucas Stach
2023-01-11 20:13 ` Ahmad Fatoum
2023-01-12 8:41 ` Lucas Stach
2023-01-11 18:21 ` Lucas Stach [this message]
2023-01-12 14:59 ` [PATCH 3/3] net: eqos: add i.MX8MP support Ahmad Fatoum
2023-01-27 14:14 ` [PATCH 1/3] nvmem: ocotp: add support for second MAC address on i.MX8MP Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230111182157.1702865-3-l.stach@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox