Re: [PATCH v2 1/1] ARM: i.MX8M: add PCA9450 PMIC on rev-b EVK

[Marco Felsch <m.felsch@pengutronix.de>]

On 23-01-11, Ahmad Fatoum wrote:
> Hi,
> 
> How do you generate your patches? Easiest is:
> 
>   git config sendemail.to barebox@lists.infradead.org
>   git send-email -3 --annotate
> 
> This will take care to number the patches correctly.
> 
> On 11.01.23 11:01, Johannes Schneider wrote:
> > Configure and setup the PMIC found on rev-b EVKs.
> > The code is algiend with how imx8mn-evk handles both
> 
> aligned*
> 
> > PMIC variants: pca9450 vs bd71837
> 
> Please note which Boards you tested this on.
> 
> > 
> > Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> > ---
> >  arch/arm/boards/nxp-imx8mm-evk/lowlevel.c | 51 +++++++++++++++--------
> >  1 file changed, 34 insertions(+), 17 deletions(-)
> > 
> > diff --git a/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c b/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
> > index 6132df53ec..409554c2d5 100644
> > --- a/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
> > +++ b/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
> > @@ -16,6 +16,7 @@
> >  #include <mach/iomux-mx8mm.h>
> >  #include <mach/imx8m-ccm-regs.h>
> >  #include <mfd/bd71837.h>
> > +#include <mfd/pca9450.h>
> >  #include <mach/xload.h>
> >  #include <soc/imx8m/ddr.h>
> >  #include <image-metadata.h>
> > @@ -38,6 +39,25 @@ static void setup_uart(void)
> >  	putc_ll('>');
> >  }
> >  
> > +static struct pmic_config pca9450_cfg[] = {
> > +	/* BUCKxOUT_DVS0/1 control BUCK123 output */
> > +	{ PCA9450_BUCK123_DVS, 0x29 },
> > +	/*
> > +	 * increase VDD_SOC to typical value 0.95V before first
> > +	 * DRAM access, set DVS1 to 0.85v for suspend.
> > +	 * Enable DVS control through PMIC_STBY_REQ and
> > +	 * set B1_ENMODE=1 (ON by PMIC_ON_REQ=H)
> > +	 */
> > +	{ PCA9450_BUCK1OUT_DVS0, 0x1C },
> > +	/* Set DVS1 to 0.85v for suspend */
> > +	/* Enable DVS control through PMIC_STBY_REQ and set B1_ENMODE=1 (ON by PMIC_ON_REQ=H) */
> > +	{ PCA9450_BUCK1OUT_DVS1, 0x14 },
> > +	{ PCA9450_BUCK1CTRL, 0x59 },
> > +
> > +	/* set WDOG_B_CFG to cold reset */
> > +	{ PCA9450_RESET_CTRL, 0xA1 },
> > +};

While picking this patch I noticed that you're configuring the PMIC
differently compared to upstream u-boot. What is the reason for this?

Regards,
  Marco

> > +
> >  static struct pmic_config bd71837_cfg[] = {
> >  	/* decrease RESET key long push time from the default 10s to 10ms */
> >  	{ BD718XX_PWRONCONFIG1, 0x0 },
> > @@ -51,21 +71,6 @@ static struct pmic_config bd71837_cfg[] = {
> >  	{ BD718XX_REGLOCK, 0x11 },
> >  };
> >  
> > -static void power_init_board(void)
> > -{
> 
> Can you leave this function as-is? This will make the diff more
> readable.
> 
> > -	struct pbl_i2c *i2c;
> > -
> > -	imx8mm_setup_pad(IMX8MM_PAD_I2C1_SCL_I2C1_SCL);
> > -	imx8mm_setup_pad(IMX8MM_PAD_I2C1_SDA_I2C1_SDA);
> > -
> > -	imx8mm_early_clock_init();
> > -	imx8m_ccgr_clock_enable(IMX8M_CCM_CCGR_I2C1);
> > -
> > -	i2c = imx8m_i2c_early_init(IOMEM(MX8MQ_I2C1_BASE_ADDR));
> > -
> > -	pmic_configure(i2c, 0x4b, bd71837_cfg, ARRAY_SIZE(bd71837_cfg));
> > -}
> > -
> >  extern struct dram_timing_info imx8mm_evk_dram_timing;
> >  
> >  static void start_atf(void)
> > @@ -78,8 +83,20 @@ static void start_atf(void)
> >  	if (current_el() != 3)
> >  		return;
> >  
> > -	power_init_board();
> > -	imx8mm_ddr_init(&imx8mm_evk_dram_timing, DRAM_TYPE_LPDDR4);
> > +	imx8mm_setup_pad(IMX8MM_PAD_I2C1_SCL_I2C1_SCL);
> > +	imx8mm_setup_pad(IMX8MM_PAD_I2C1_SDA_I2C1_SDA);
> > +
> > +	imx8mm_early_clock_init();
> > +	imx8m_ccgr_clock_enable(IMX8M_CCM_CCGR_I2C1);
> > +
> > +	i2c = imx8m_i2c_early_init(IOMEM(MX8MM_I2C1_BASE_ADDR));
> > +
> > +	imx8mm_ddr_init(&imx8mm_evk_lpddr4_timing, DRAM_TYPE_LPDDR4);
> > +	if (i2c_dev_probe(i2c, 0x25, true) == 0) {
> > +		pmic_configure(i2c, 0x25, pca9450_cfg, ARRAY_SIZE(pca9450_cfg));
> > +	} else {
> > +		pmic_configure(i2c, 0x4b, bd71837_cfg, ARRAY_SIZE(bd71837_cfg));
> > +	}
> 
> Nitpick: You can drop the braces (Kernel coding style).
> 
> >  
> >  	imx8mm_load_and_start_image_via_tfa();
> >  }
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
> 
>