From: John Watts <contact@jookia.org>
To: barebox@lists.infradead.org
Cc: John Watts <contact@jookia.org>
Subject: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
Date: Mon, 23 Jan 2023 04:51:40 +1100 [thread overview]
Message-ID: <20230122175141.119834-5-contact@jookia.org> (raw)
In-Reply-To: <20230122175141.119834-1-contact@jookia.org>
The Novena has an EEPROM used for storing information about the board,
including the Ethernet MAC address.
The reference for the EEPROM fields is the novena-eeprom source code.
Signed-off-by: John Watts <contact@jookia.org>
---
arch/arm/boards/novena/board.c | 68 ++++++++++++++++++++++++++++++++++
arch/arm/dts/imx6q-novena.dts | 15 ++++++++
2 files changed, 83 insertions(+)
diff --git a/arch/arm/boards/novena/board.c b/arch/arm/boards/novena/board.c
index 186f91093f..0341117c46 100644
--- a/arch/arm/boards/novena/board.c
+++ b/arch/arm/boards/novena/board.c
@@ -2,12 +2,80 @@
// SPDX-FileCopyrightText: 2023 John Watts
#include <common.h>
+#include <fs.h>
+#include <libfile.h>
+#include <net.h>
+
+struct novena_eeprom {
+ uint8_t signature[6]; /* 'Novena' */
+ uint8_t version; /* 1 or 2, not checked */
+ uint8_t page_size; /* v2 only: EEPROM read/write page */
+ uint32_t serial; /* 32-bit serial number */
+ uint8_t mac[6]; /* Gigabit MAC address */
+ uint16_t features; /* features */
+ /* ... extra fields omitted ... */
+} __packed;
+
+static struct novena_eeprom *novena_read_eeprom(void)
+{
+ size_t read;
+ loff_t max = sizeof(struct novena_eeprom);
+ void *eeprom;
+
+ int rc = read_file_2("/dev/eeprom0", &read, &eeprom, max);
+
+ if (rc < 0 && rc != -EFBIG) {
+ pr_err("Unable to read Novena EEPROM: %s\n", strerror(-rc));
+ return NULL;
+ } else if (read != max) {
+ pr_err("Short read from Novena EEPROM?\n");
+ return NULL;
+ } else {
+ return eeprom;
+ }
+}
+
+static bool novena_check_eeprom(struct novena_eeprom *eeprom)
+{
+ char *sig = eeprom->signature;
+ size_t size = sizeof(eeprom->signature);
+
+ if (memcmp("Novena", sig, size) != 0) {
+ pr_err("Unknown Novena EEPROM signature\n");
+ return false;
+ }
+
+ return true;
+}
+
+static void novena_set_mac(struct novena_eeprom *eeprom)
+{
+ struct device_node *dnode;
+
+ dnode = of_find_node_by_alias(of_get_root_node(), "ethernet0");
+ if (dnode)
+ of_eth_register_ethaddr(dnode, eeprom->mac);
+ else
+ pr_err("Unable to find ethernet node\n");
+}
+
+static void novena_try_eeprom(void)
+{
+ struct novena_eeprom *eeprom = novena_read_eeprom();
+
+ if (!eeprom || !novena_check_eeprom(eeprom))
+ return;
+
+ novena_set_mac(eeprom);
+}
static int novena_device_init(void)
{
if (!of_machine_is_compatible("kosagi,imx6q-novena"))
return 0;
+ novena_try_eeprom();
+
return 0;
}
device_initcall(novena_device_init);
diff --git a/arch/arm/dts/imx6q-novena.dts b/arch/arm/dts/imx6q-novena.dts
index 07471cb132..095dcde0d5 100644
--- a/arch/arm/dts/imx6q-novena.dts
+++ b/arch/arm/dts/imx6q-novena.dts
@@ -2,3 +2,18 @@
// SPDX-FileCopyrightText: 2023 John Watts
#include <arm/imx6q-novena.dts>
+
+/ {
+ aliases {
+ eeprom0 = &eeprom;
+ };
+};
+
+&i2c3 {
+ eeprom: eeprom@56 {
+ compatible = "24c512";
+ reg = <0x56>;
+ pagesize = <128>;
+ status = "okay";
+ };
+};
--
2.39.0
next prev parent reply other threads:[~2023-01-22 17:53 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-22 17:51 [PATCH 0/5] Add support for the Kosagi Novena board John Watts
2023-01-22 17:51 ` [PATCH 1/5] ARM: novena: Add " John Watts
2023-01-23 9:20 ` Sascha Hauer
2023-01-22 17:51 ` [PATCH 2/5] ARM: novena: Setup RAM using static configuration John Watts
2023-01-22 17:51 ` [PATCH 3/5] ARM: novena: Require the PFUZE regulator John Watts
2023-01-22 17:51 ` John Watts [this message]
2023-01-23 9:33 ` [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM Sascha Hauer
2023-01-23 9:55 ` John Watts
2023-01-24 18:35 ` John Watts
2023-01-25 8:04 ` Sascha Hauer
2023-01-25 8:11 ` John Watts
2023-01-25 8:19 ` Sascha Hauer
2023-01-25 13:31 ` John Watts
2023-01-25 13:48 ` Ahmad Fatoum
2023-01-25 14:04 ` John Watts
2023-01-25 14:16 ` Ahmad Fatoum
2023-01-25 14:28 ` John Watts
2023-01-25 14:33 ` Ahmad Fatoum
2023-01-25 14:50 ` John Watts
2023-01-25 15:42 ` Sascha Hauer
2023-01-25 16:13 ` John Watts
2023-01-22 17:51 ` [PATCH 5/5] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-22 23:20 ` John Watts
2023-01-25 16:42 ` [PATCH v2 0/4] Add support for the Kosagi Novena board John Watts
2023-01-25 16:42 ` [PATCH v2 1/4] ARM: novena: Add " John Watts
2023-01-25 19:33 ` Marco Felsch
2023-01-26 7:25 ` Sascha Hauer
2023-01-26 7:50 ` John Watts
2023-01-26 9:13 ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration John Watts
2023-01-25 19:39 ` Marco Felsch
2023-01-26 7:54 ` John Watts
2023-01-26 8:11 ` Sascha Hauer
2023-01-26 9:14 ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-25 20:07 ` Marco Felsch
2023-01-26 8:05 ` John Watts
2023-01-26 9:07 ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 4/4] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-29 23:27 ` [PATCH v3 0/4] Add support for the Kosagi Novena board John Watts
2023-01-29 23:27 ` [PATCH v3 1/4] ARM: novena: Add " John Watts
2023-01-30 20:13 ` Marco Felsch
2023-01-30 20:26 ` John Watts
2023-01-31 9:45 ` Marco Felsch
2023-01-29 23:27 ` [PATCH v3 2/4] ARM: novena: Setup RAM using static configuration John Watts
2023-01-29 23:27 ` [PATCH v3 3/4] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-30 20:04 ` Marco Felsch
2023-01-30 20:25 ` John Watts
2023-01-31 9:29 ` Marco Felsch
2023-01-29 23:28 ` [PATCH v3 4/4] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-30 20:18 ` Marco Felsch
2023-01-30 20:41 ` John Watts
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230122175141.119834-5-contact@jookia.org \
--to=contact@jookia.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox