From: Sascha Hauer <sha@pengutronix.de>
To: John Watts <contact@jookia.org>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
Date: Mon, 23 Jan 2023 10:33:05 +0100 [thread overview]
Message-ID: <20230123093305.GS24755@pengutronix.de> (raw)
In-Reply-To: <20230122175141.119834-5-contact@jookia.org>
On Mon, Jan 23, 2023 at 04:51:40AM +1100, John Watts wrote:
> The Novena has an EEPROM used for storing information about the board,
> including the Ethernet MAC address.
>
> The reference for the EEPROM fields is the novena-eeprom source code.
>
> Signed-off-by: John Watts <contact@jookia.org>
> ---
> arch/arm/boards/novena/board.c | 68 ++++++++++++++++++++++++++++++++++
> arch/arm/dts/imx6q-novena.dts | 15 ++++++++
> 2 files changed, 83 insertions(+)
>
> diff --git a/arch/arm/boards/novena/board.c b/arch/arm/boards/novena/board.c
> index 186f91093f..0341117c46 100644
> --- a/arch/arm/boards/novena/board.c
> +++ b/arch/arm/boards/novena/board.c
> @@ -2,12 +2,80 @@
> // SPDX-FileCopyrightText: 2023 John Watts
>
> #include <common.h>
> +#include <fs.h>
> +#include <libfile.h>
> +#include <net.h>
> +
> +struct novena_eeprom {
> + uint8_t signature[6]; /* 'Novena' */
> + uint8_t version; /* 1 or 2, not checked */
> + uint8_t page_size; /* v2 only: EEPROM read/write page */
> + uint32_t serial; /* 32-bit serial number */
> + uint8_t mac[6]; /* Gigabit MAC address */
> + uint16_t features; /* features */
> + /* ... extra fields omitted ... */
> +} __packed;
> +
> +static struct novena_eeprom *novena_read_eeprom(void)
> +{
> + size_t read;
> + loff_t max = sizeof(struct novena_eeprom);
> + void *eeprom;
> +
> + int rc = read_file_2("/dev/eeprom0", &read, &eeprom, max);
And here is the point where you have to request that the EEPROM is
actually availabe to support the deep probe mechanism. Before reading
the EEPROM add a call to:
of_device_ensure_probed_by_alias("eeprom0");
Nowadays the read-MAC-address-from-EEPROM thingy would likely be done
using nvmem cells which would boil this code down to device tree changes
only. If you're feeling brave you could change this, I won't insist on
it though.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2023-01-23 9:34 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-22 17:51 [PATCH 0/5] Add support for the Kosagi Novena board John Watts
2023-01-22 17:51 ` [PATCH 1/5] ARM: novena: Add " John Watts
2023-01-23 9:20 ` Sascha Hauer
2023-01-22 17:51 ` [PATCH 2/5] ARM: novena: Setup RAM using static configuration John Watts
2023-01-22 17:51 ` [PATCH 3/5] ARM: novena: Require the PFUZE regulator John Watts
2023-01-22 17:51 ` [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-23 9:33 ` Sascha Hauer [this message]
2023-01-23 9:55 ` John Watts
2023-01-24 18:35 ` John Watts
2023-01-25 8:04 ` Sascha Hauer
2023-01-25 8:11 ` John Watts
2023-01-25 8:19 ` Sascha Hauer
2023-01-25 13:31 ` John Watts
2023-01-25 13:48 ` Ahmad Fatoum
2023-01-25 14:04 ` John Watts
2023-01-25 14:16 ` Ahmad Fatoum
2023-01-25 14:28 ` John Watts
2023-01-25 14:33 ` Ahmad Fatoum
2023-01-25 14:50 ` John Watts
2023-01-25 15:42 ` Sascha Hauer
2023-01-25 16:13 ` John Watts
2023-01-22 17:51 ` [PATCH 5/5] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-22 23:20 ` John Watts
2023-01-25 16:42 ` [PATCH v2 0/4] Add support for the Kosagi Novena board John Watts
2023-01-25 16:42 ` [PATCH v2 1/4] ARM: novena: Add " John Watts
2023-01-25 19:33 ` Marco Felsch
2023-01-26 7:25 ` Sascha Hauer
2023-01-26 7:50 ` John Watts
2023-01-26 9:13 ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration John Watts
2023-01-25 19:39 ` Marco Felsch
2023-01-26 7:54 ` John Watts
2023-01-26 8:11 ` Sascha Hauer
2023-01-26 9:14 ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-25 20:07 ` Marco Felsch
2023-01-26 8:05 ` John Watts
2023-01-26 9:07 ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 4/4] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-29 23:27 ` [PATCH v3 0/4] Add support for the Kosagi Novena board John Watts
2023-01-29 23:27 ` [PATCH v3 1/4] ARM: novena: Add " John Watts
2023-01-30 20:13 ` Marco Felsch
2023-01-30 20:26 ` John Watts
2023-01-31 9:45 ` Marco Felsch
2023-01-29 23:27 ` [PATCH v3 2/4] ARM: novena: Setup RAM using static configuration John Watts
2023-01-29 23:27 ` [PATCH v3 3/4] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-30 20:04 ` Marco Felsch
2023-01-30 20:25 ` John Watts
2023-01-31 9:29 ` Marco Felsch
2023-01-29 23:28 ` [PATCH v3 4/4] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-30 20:18 ` Marco Felsch
2023-01-30 20:41 ` John Watts
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230123093305.GS24755@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=contact@jookia.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox