mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <sha@pengutronix.de>
To: John Watts <contact@jookia.org>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
Date: Wed, 25 Jan 2023 09:19:23 +0100	[thread overview]
Message-ID: <20230125081923.GY24755@pengutronix.de> (raw)
In-Reply-To: <Y9DkOI1yxte95PYg@novena-choice-citizen>

On Wed, Jan 25, 2023 at 07:11:36PM +1100, John Watts wrote:
> On Wed, Jan 25, 2023 at 09:04:06AM +0100, Sascha Hauer wrote:
> > It looks like something is not initialized correctly yet. Normally
> > the usual suspects are pinctrl, clocks or regulators. Each of them
> > should be tied in by the deep probe mechanism as needed already, at
> > least when it's properly registered in the device tree. Clock looks
> > correct (66MHz), for the (pfuze) regulator I can't find anything in the
> > board code that configures something there later. You could verify
> > that the pinctrl has been configured already by activating the debugging
> > in drivers/pinctrl/imx-iomux-v3.c.
> > It could be something that pulls SDA low, but I don't have an idea why
> > it should work later.
> 
> My immediate guess is that it's the pinctrl, but shouldn't this be set up
> for me already? Or have I found a device tree bug?

Yes, normally it should be set up already, unless of course there is
some needed pinctrl configuration in an unrelated device tree node.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



  reply	other threads:[~2023-01-25  8:20 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-22 17:51 [PATCH 0/5] Add support for the Kosagi Novena board John Watts
2023-01-22 17:51 ` [PATCH 1/5] ARM: novena: Add " John Watts
2023-01-23  9:20   ` Sascha Hauer
2023-01-22 17:51 ` [PATCH 2/5] ARM: novena: Setup RAM using static configuration John Watts
2023-01-22 17:51 ` [PATCH 3/5] ARM: novena: Require the PFUZE regulator John Watts
2023-01-22 17:51 ` [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-23  9:33   ` Sascha Hauer
2023-01-23  9:55     ` John Watts
2023-01-24 18:35     ` John Watts
2023-01-25  8:04       ` Sascha Hauer
2023-01-25  8:11         ` John Watts
2023-01-25  8:19           ` Sascha Hauer [this message]
2023-01-25 13:31             ` John Watts
2023-01-25 13:48               ` Ahmad Fatoum
2023-01-25 14:04                 ` John Watts
2023-01-25 14:16                   ` Ahmad Fatoum
2023-01-25 14:28                     ` John Watts
2023-01-25 14:33                       ` Ahmad Fatoum
2023-01-25 14:50                         ` John Watts
2023-01-25 15:42               ` Sascha Hauer
2023-01-25 16:13                 ` John Watts
2023-01-22 17:51 ` [PATCH 5/5] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-22 23:20   ` John Watts
2023-01-25 16:42 ` [PATCH v2 0/4] Add support for the Kosagi Novena board John Watts
2023-01-25 16:42 ` [PATCH v2 1/4] ARM: novena: Add " John Watts
2023-01-25 19:33   ` Marco Felsch
2023-01-26  7:25     ` Sascha Hauer
2023-01-26  7:50     ` John Watts
2023-01-26  9:13       ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration John Watts
2023-01-25 19:39   ` Marco Felsch
2023-01-26  7:54     ` John Watts
2023-01-26  8:11       ` Sascha Hauer
2023-01-26  9:14         ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-25 20:07   ` Marco Felsch
2023-01-26  8:05     ` John Watts
2023-01-26  9:07       ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 4/4] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-29 23:27 ` [PATCH v3 0/4] Add support for the Kosagi Novena board John Watts
2023-01-29 23:27 ` [PATCH v3 1/4] ARM: novena: Add " John Watts
2023-01-30 20:13   ` Marco Felsch
2023-01-30 20:26     ` John Watts
2023-01-31  9:45       ` Marco Felsch
2023-01-29 23:27 ` [PATCH v3 2/4] ARM: novena: Setup RAM using static configuration John Watts
2023-01-29 23:27 ` [PATCH v3 3/4] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-30 20:04   ` Marco Felsch
2023-01-30 20:25     ` John Watts
2023-01-31  9:29       ` Marco Felsch
2023-01-29 23:28 ` [PATCH v3 4/4] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-30 20:18   ` Marco Felsch
2023-01-30 20:41     ` John Watts

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230125081923.GY24755@pengutronix.de \
    --to=sha@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=contact@jookia.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox