From: John Watts <contact@jookia.org>
To: barebox@lists.infradead.org
Cc: John Watts <contact@jookia.org>
Subject: [PATCH v3 0/4] Add support for the Kosagi Novena board
Date: Mon, 30 Jan 2023 10:27:56 +1100 [thread overview]
Message-ID: <20230129232758.1799987-1-contact@jookia.org> (raw)
In-Reply-To: <20230122175141.119834-1-contact@jookia.org>
This patch series introduces support for the Novena board.
This support is basic but enough to boot Barebox.
The EEPROM code here is included in anticipation for reading the features
flag in the future when more board features are supported.
Changes v2 -> v3:
- EEPROM data is freed correctly
- Add email to copyright headers
- Switched license from GPL2 to GPL2+
- Dropped get_runtime_offset for device tree
- Removed "okay" status from EEPROM in device tree
- Moved novena_try_eeprom code in to novena_probe
- Other small code re-organizations
- Moved OCRAM address to its own separate patch
- Moved udelay fix to its own patch
Changes v1 -> v2:
- The board uses the driver model now
- Memory density is now calculated correctly
John Watts (4):
ARM: novena: Add Kosagi Novena board
ARM: novena: Setup RAM using static configuration
ARM: novena: Read Ethernet MAC address from EEPROM
ARM: novena: Use DDR3 information from SPD EEPROM
arch/arm/boards/Makefile | 1 +
arch/arm/boards/novena/Makefile | 4 +
arch/arm/boards/novena/board.c | 109 +++++++++++
arch/arm/boards/novena/ddr_regs.h | 119 ++++++++++++
.../boards/novena/flash-header-novena.imxcfg | 6 +
arch/arm/boards/novena/lowlevel.c | 183 ++++++++++++++++++
arch/arm/configs/imx_v7_defconfig | 1 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx6q-novena.dts | 18 ++
arch/arm/mach-imx/Kconfig | 8 +
images/Makefile.imx | 2 +
11 files changed, 452 insertions(+)
create mode 100644 arch/arm/boards/novena/Makefile
create mode 100644 arch/arm/boards/novena/board.c
create mode 100644 arch/arm/boards/novena/ddr_regs.h
create mode 100644 arch/arm/boards/novena/flash-header-novena.imxcfg
create mode 100644 arch/arm/boards/novena/lowlevel.c
create mode 100644 arch/arm/dts/imx6q-novena.dts
--
2.39.1
next prev parent reply other threads:[~2023-01-30 17:40 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-22 17:51 [PATCH 0/5] " John Watts
2023-01-22 17:51 ` [PATCH 1/5] ARM: novena: Add " John Watts
2023-01-23 9:20 ` Sascha Hauer
2023-01-22 17:51 ` [PATCH 2/5] ARM: novena: Setup RAM using static configuration John Watts
2023-01-22 17:51 ` [PATCH 3/5] ARM: novena: Require the PFUZE regulator John Watts
2023-01-22 17:51 ` [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-23 9:33 ` Sascha Hauer
2023-01-23 9:55 ` John Watts
2023-01-24 18:35 ` John Watts
2023-01-25 8:04 ` Sascha Hauer
2023-01-25 8:11 ` John Watts
2023-01-25 8:19 ` Sascha Hauer
2023-01-25 13:31 ` John Watts
2023-01-25 13:48 ` Ahmad Fatoum
2023-01-25 14:04 ` John Watts
2023-01-25 14:16 ` Ahmad Fatoum
2023-01-25 14:28 ` John Watts
2023-01-25 14:33 ` Ahmad Fatoum
2023-01-25 14:50 ` John Watts
2023-01-25 15:42 ` Sascha Hauer
2023-01-25 16:13 ` John Watts
2023-01-22 17:51 ` [PATCH 5/5] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-22 23:20 ` John Watts
2023-01-25 16:42 ` [PATCH v2 0/4] Add support for the Kosagi Novena board John Watts
2023-01-25 16:42 ` [PATCH v2 1/4] ARM: novena: Add " John Watts
2023-01-25 19:33 ` Marco Felsch
2023-01-26 7:25 ` Sascha Hauer
2023-01-26 7:50 ` John Watts
2023-01-26 9:13 ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration John Watts
2023-01-25 19:39 ` Marco Felsch
2023-01-26 7:54 ` John Watts
2023-01-26 8:11 ` Sascha Hauer
2023-01-26 9:14 ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-25 20:07 ` Marco Felsch
2023-01-26 8:05 ` John Watts
2023-01-26 9:07 ` Marco Felsch
2023-01-25 16:42 ` [PATCH v2 4/4] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-29 23:27 ` John Watts [this message]
2023-01-29 23:27 ` [PATCH v3 1/4] ARM: novena: Add Kosagi Novena board John Watts
2023-01-30 20:13 ` Marco Felsch
2023-01-30 20:26 ` John Watts
2023-01-31 9:45 ` Marco Felsch
2023-01-29 23:27 ` [PATCH v3 2/4] ARM: novena: Setup RAM using static configuration John Watts
2023-01-29 23:27 ` [PATCH v3 3/4] ARM: novena: Read Ethernet MAC address from EEPROM John Watts
2023-01-30 20:04 ` Marco Felsch
2023-01-30 20:25 ` John Watts
2023-01-31 9:29 ` Marco Felsch
2023-01-29 23:28 ` [PATCH v3 4/4] ARM: novena: Use DDR3 information from SPD EEPROM John Watts
2023-01-30 20:18 ` Marco Felsch
2023-01-30 20:41 ` John Watts
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230129232758.1799987-1-contact@jookia.org \
--to=contact@jookia.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox