From: Marco Felsch <m.felsch@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 20/21] ARM: i.MX8M: add qspi barebox and barebox-environment partitions
Date: Thu, 09 Mar 2023 11:40:52 +0100 [thread overview]
Message-ID: <20230228-v2023-02-0-topic-flexspi-v1-20-7b3c3fa295f5@pengutronix.de> (raw)
In-Reply-To: <20230228-v2023-02-0-topic-flexspi-v1-0-7b3c3fa295f5@pengutronix.de>
Use the same partition size layout as done for SD/eMMC devices.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
arch/arm/dts/imx8mm-evk.dtsi | 19 +++++++++++++++++++
arch/arm/dts/imx8mn-evk.dtsi | 19 +++++++++++++++++++
arch/arm/dts/imx8mp-evk.dts | 19 +++++++++++++++++++
3 files changed, 57 insertions(+)
diff --git a/arch/arm/dts/imx8mm-evk.dtsi b/arch/arm/dts/imx8mm-evk.dtsi
index 4d64dcad1c..a657faa6bc 100644
--- a/arch/arm/dts/imx8mm-evk.dtsi
+++ b/arch/arm/dts/imx8mm-evk.dtsi
@@ -19,6 +19,25 @@
};
};
+&{flexspi/flash@0} {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+ };
+
+};
+
®_usdhc2_vmmc {
off-on-delay-us = <20000>;
};
diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi
index d15f66ff40..c23075216e 100644
--- a/arch/arm/dts/imx8mn-evk.dtsi
+++ b/arch/arm/dts/imx8mn-evk.dtsi
@@ -21,6 +21,25 @@
};
};
+&flash0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+ };
+
+};
+
&usdhc2 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/dts/imx8mp-evk.dts b/arch/arm/dts/imx8mp-evk.dts
index 28d8c5f929..0acc3731d5 100644
--- a/arch/arm/dts/imx8mp-evk.dts
+++ b/arch/arm/dts/imx8mp-evk.dts
@@ -35,6 +35,25 @@
reset-deassert-us = <100000>;
};
+&{flexspi/flash@0} {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+ };
+
+};
+
®_usdhc2_vmmc {
off-on-delay-us = <20000>;
};
--
2.30.2
next prev parent reply other threads:[~2023-03-09 10:45 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-09 10:40 [PATCH 00/21] FlexSPI image/boot/update support Marco Felsch
2023-03-09 10:40 ` [PATCH 01/21] spi: remove flash_platform_data support Marco Felsch
2023-03-09 10:40 ` [PATCH 02/21] bbu: make it possible to check multiple of-compatibles Marco Felsch
2023-03-09 10:40 ` [PATCH 03/21] ARM: i.MX8MM: add missing IMD_USED_OF image metadata entry Marco Felsch
2023-03-09 10:40 ` [PATCH 04/21] ARM: i.MX8MN: add missing IMD_USED_OF image metadata entries Marco Felsch
2023-03-09 10:40 ` [PATCH 05/21] mci: imx-esdhc-pbl: fix number of read blocks Marco Felsch
2023-03-09 10:40 ` [PATCH 06/21] mci: imx-esdhc-pbl: refactor the esdhc_load_image function Marco Felsch
2023-03-09 10:40 ` [PATCH 07/21] mci: imx-esdhc-pbl: move imx_load_image into common xload code Marco Felsch
2023-03-09 10:40 ` [PATCH 08/21] ARM: i.MX8M: Add QSPI image load support Marco Felsch
2023-03-09 10:40 ` [PATCH 09/21] ARM: i.MX8MM bootsource: fix QSPI boot source detection Marco Felsch
2023-03-09 10:40 ` [PATCH 10/21] ARM: i.MX8M: Add QSPI boot support Marco Felsch
2023-03-09 10:40 ` [PATCH 11/21] scripts: imx-image: convert flag variables into bool Marco Felsch
2023-03-09 10:40 ` [PATCH 12/21] scripts: imx-image: header_v2: factor out offset parameter Marco Felsch
2023-03-09 10:40 ` [PATCH 13/21] scripts: imx-image: header_v2: add header_len parameter Marco Felsch
2023-03-09 10:40 ` [PATCH 14/21] scripts: imx-image: add FlexSPI image support Marco Felsch
2023-03-09 10:40 ` [PATCH 15/21] filetype: add NXP FlexSPI filetype Marco Felsch
2023-03-09 10:40 ` [PATCH 16/21] ARM: i.MX: bbu: rename IMX_INTERNAL_FLAG_ERASE to IMX_BBU_FLAG_ERASE Marco Felsch
2023-03-09 10:40 ` [PATCH 17/21] ARM: i.MX: bbu: add target device offset Marco Felsch
2023-03-09 10:40 ` [PATCH 18/21] ARM: i.MX: bbu: add FlexSPI update handler Marco Felsch
2023-03-09 10:40 ` [PATCH 19/21] ARM: i.MX8M: enable FlexSPI image support Marco Felsch
2023-03-09 10:40 ` Marco Felsch [this message]
2023-03-09 10:40 ` [PATCH 21/21] ARM: i.MX8M: add QSPI update handler Marco Felsch
2023-03-09 11:28 ` [PATCH 00/21] FlexSPI image/boot/update support Ahmad Fatoum
2023-03-09 11:41 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230228-v2023-02-0-topic-flexspi-v1-20-7b3c3fa295f5@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox