From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Tue, 28 Feb 2023 15:32:36 +0100 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1pX11v-004kzG-9I for lore@lore.pengutronix.de; Tue, 28 Feb 2023 15:32:36 +0100 Received: from bombadil.infradead.org ([2607:7c80:54:3::133]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1pX11r-0004sn-Qq for lore@pengutronix.de; Tue, 28 Feb 2023 15:32:35 +0100 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To: Cc:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=32MM4UL0YPCJRIY8S6wuJ8LqXDKR8fFCATdWG2ziR48=; b=PMqnrhqZcGkclkifKD6PvGoVZj D8T4B2w/u2l30Glif0BB+ZqFzU6vmHi/3ULiahPDqJ9S+ymMBZNlHk4Kr0INPVWFKgiGnrGwIS8Lj 7wApVLvk/nHCwrs5/zxpbN8GWX6CFF2W8VsBZupNZg8IcK+8yTeaMglrc7BzW9djDTPySOCBma59W RMWJfGR9Tt1gDCtmy7+bmv/TEZUwh/WGdlfJleHgghAHc+qADsVo5S/kpPkgAcVm3Z1KMqP8qnewb li49mB2xuhbARJUdMXj/f3mCcgEQjjoQetLyE6KVMuGIRueWyQCRVKlDQGuZZxjgWa6xjPKHKpSHg mC3GPW+g==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1pX10Y-00DT0B-1O; Tue, 28 Feb 2023 14:31:10 +0000 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1pX101-00DSgW-13 for barebox@lists.infradead.org; Tue, 28 Feb 2023 14:30:43 +0000 Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1pX0zz-00048u-Ql; Tue, 28 Feb 2023 15:30:35 +0100 Received: from [2a0a:edc0:0:1101:1d::28] (helo=dude02.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtp (Exim 4.94.2) (envelope-from ) id 1pX0zz-000t9F-6G; Tue, 28 Feb 2023 15:30:35 +0100 Received: from sha by dude02.red.stw.pengutronix.de with local (Exim 4.94.2) (envelope-from ) id 1pX0zx-007LXQ-1L; Tue, 28 Feb 2023 15:30:33 +0100 From: Sascha Hauer To: Barebox List Date: Tue, 28 Feb 2023 15:30:31 +0100 Message-Id: <20230228143031.1718565-10-s.hauer@pengutronix.de> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230228143031.1718565-1-s.hauer@pengutronix.de> References: <20230228143031.1718565-1-s.hauer@pengutronix.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230228_063037_426056_F2B5409C X-CRM114-Status: GOOD ( 22.29 ) X-BeenThere: barebox@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "barebox" X-SA-Exim-Connect-IP: 2607:7c80:54:3::133 X-SA-Exim-Mail-From: barebox-bounces+lore=pengutronix.de@lists.infradead.org X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on metis.ext.pengutronix.de X-Spam-Level: X-Spam-Status: No, score=-4.9 required=4.0 tests=AWL,BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED,SPF_HELO_NONE,SPF_NONE, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.2 Subject: [PATCH 9/9] ARM: pxa: Move plat/ include files to mach/ X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on metis.ext.pengutronix.de) pxa has include files in include/plat/. Move the content over to include/mach/ to be in line with other architectures. Signed-off-by: Sascha Hauer --- arch/arm/mach-pxa/include/mach/gpio.h | 38 +- arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h | 2 +- arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h | 2 +- arch/arm/mach-pxa/include/mach/mfp.h | 460 ++++++++++++++++++- arch/arm/mach-pxa/include/plat/gpio.h | 42 -- arch/arm/mach-pxa/include/plat/mfp.h | 469 -------------------- arch/arm/mach-pxa/mfp-pxa3xx.c | 2 +- 7 files changed, 494 insertions(+), 521 deletions(-) delete mode 100644 arch/arm/mach-pxa/include/plat/gpio.h delete mode 100644 arch/arm/mach-pxa/include/plat/mfp.h diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index e6724e1caf..d8eac99fbc 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -128,5 +128,41 @@ static inline int __gpio_is_occupied(unsigned gpio) } else return GPDR(gpio) & GPIO_bit(gpio); } -#include + +/* + * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with + * one set of registers. The register offsets are organized below: + * + * GPLR GPDR GPSR GPCR GRER GFER GEDR + * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 + * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C + * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 + * + * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 + * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C + * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 + * + * NOTE: + * BANK 3 is only available on PXA27x and later processors. + * BANK 4 and 5 are only available on PXA935 + */ + +#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) + +#define GPLR_OFFSET 0x00 +#define GPDR_OFFSET 0x0C +#define GPSR_OFFSET 0x18 +#define GPCR_OFFSET 0x24 +#define GRER_OFFSET 0x30 +#define GFER_OFFSET 0x3C +#define GEDR_OFFSET 0x48 + +/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). + * Those cases currently cause holes in the GPIO number space, the + * actual number of the last GPIO is recorded by 'pxa_last_gpio'. + */ +extern int pxa_last_gpio; + +extern int pxa_init_gpio(int start, int end); + #endif diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index b01f6188d4..2713d4cc9f 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -3,7 +3,7 @@ #ifndef __ASM_ARCH_MFP_PXA2XX_H #define __ASM_ARCH_MFP_PXA2XX_H -#include +#include /* * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h index 00eb724709..8e4af7cde8 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h @@ -3,7 +3,7 @@ #ifndef __ASM_ARCH_MFP_PXA3XX_H #define __ASM_ARCH_MFP_PXA3XX_H -#include +#include #define MFPR_BASE (0x40e10000) diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h index 271e249ae3..fd8c810552 100644 --- a/arch/arm/mach-pxa/include/mach/mfp.h +++ b/arch/arm/mach-pxa/include/mach/mfp.h @@ -1,7 +1,7 @@ /* - * arch/arm/mach-pxa/include/mach/mfp.h + * arch/arm/plat-pxa/include/plat/mfp.h * - * Multi-Function Pin Definitions + * Common Multi-Function Pin Definitions * * Copyright (C) 2007 Marvell International Ltd. * @@ -13,9 +13,457 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_MFP_H -#define __ASM_ARCH_MFP_H +#ifndef __MACH_PXA_MFP_H +#define __MACH_PXA_MFP_H -#include +#define mfp_to_gpio(m) ((m) % 256) -#endif /* __ASM_ARCH_MFP_H */ +/* list of all the configurable MFP pins */ +enum { + MFP_PIN_INVALID = -1, + + MFP_PIN_GPIO0 = 0, + MFP_PIN_GPIO1, + MFP_PIN_GPIO2, + MFP_PIN_GPIO3, + MFP_PIN_GPIO4, + MFP_PIN_GPIO5, + MFP_PIN_GPIO6, + MFP_PIN_GPIO7, + MFP_PIN_GPIO8, + MFP_PIN_GPIO9, + MFP_PIN_GPIO10, + MFP_PIN_GPIO11, + MFP_PIN_GPIO12, + MFP_PIN_GPIO13, + MFP_PIN_GPIO14, + MFP_PIN_GPIO15, + MFP_PIN_GPIO16, + MFP_PIN_GPIO17, + MFP_PIN_GPIO18, + MFP_PIN_GPIO19, + MFP_PIN_GPIO20, + MFP_PIN_GPIO21, + MFP_PIN_GPIO22, + MFP_PIN_GPIO23, + MFP_PIN_GPIO24, + MFP_PIN_GPIO25, + MFP_PIN_GPIO26, + MFP_PIN_GPIO27, + MFP_PIN_GPIO28, + MFP_PIN_GPIO29, + MFP_PIN_GPIO30, + MFP_PIN_GPIO31, + MFP_PIN_GPIO32, + MFP_PIN_GPIO33, + MFP_PIN_GPIO34, + MFP_PIN_GPIO35, + MFP_PIN_GPIO36, + MFP_PIN_GPIO37, + MFP_PIN_GPIO38, + MFP_PIN_GPIO39, + MFP_PIN_GPIO40, + MFP_PIN_GPIO41, + MFP_PIN_GPIO42, + MFP_PIN_GPIO43, + MFP_PIN_GPIO44, + MFP_PIN_GPIO45, + MFP_PIN_GPIO46, + MFP_PIN_GPIO47, + MFP_PIN_GPIO48, + MFP_PIN_GPIO49, + MFP_PIN_GPIO50, + MFP_PIN_GPIO51, + MFP_PIN_GPIO52, + MFP_PIN_GPIO53, + MFP_PIN_GPIO54, + MFP_PIN_GPIO55, + MFP_PIN_GPIO56, + MFP_PIN_GPIO57, + MFP_PIN_GPIO58, + MFP_PIN_GPIO59, + MFP_PIN_GPIO60, + MFP_PIN_GPIO61, + MFP_PIN_GPIO62, + MFP_PIN_GPIO63, + MFP_PIN_GPIO64, + MFP_PIN_GPIO65, + MFP_PIN_GPIO66, + MFP_PIN_GPIO67, + MFP_PIN_GPIO68, + MFP_PIN_GPIO69, + MFP_PIN_GPIO70, + MFP_PIN_GPIO71, + MFP_PIN_GPIO72, + MFP_PIN_GPIO73, + MFP_PIN_GPIO74, + MFP_PIN_GPIO75, + MFP_PIN_GPIO76, + MFP_PIN_GPIO77, + MFP_PIN_GPIO78, + MFP_PIN_GPIO79, + MFP_PIN_GPIO80, + MFP_PIN_GPIO81, + MFP_PIN_GPIO82, + MFP_PIN_GPIO83, + MFP_PIN_GPIO84, + MFP_PIN_GPIO85, + MFP_PIN_GPIO86, + MFP_PIN_GPIO87, + MFP_PIN_GPIO88, + MFP_PIN_GPIO89, + MFP_PIN_GPIO90, + MFP_PIN_GPIO91, + MFP_PIN_GPIO92, + MFP_PIN_GPIO93, + MFP_PIN_GPIO94, + MFP_PIN_GPIO95, + MFP_PIN_GPIO96, + MFP_PIN_GPIO97, + MFP_PIN_GPIO98, + MFP_PIN_GPIO99, + MFP_PIN_GPIO100, + MFP_PIN_GPIO101, + MFP_PIN_GPIO102, + MFP_PIN_GPIO103, + MFP_PIN_GPIO104, + MFP_PIN_GPIO105, + MFP_PIN_GPIO106, + MFP_PIN_GPIO107, + MFP_PIN_GPIO108, + MFP_PIN_GPIO109, + MFP_PIN_GPIO110, + MFP_PIN_GPIO111, + MFP_PIN_GPIO112, + MFP_PIN_GPIO113, + MFP_PIN_GPIO114, + MFP_PIN_GPIO115, + MFP_PIN_GPIO116, + MFP_PIN_GPIO117, + MFP_PIN_GPIO118, + MFP_PIN_GPIO119, + MFP_PIN_GPIO120, + MFP_PIN_GPIO121, + MFP_PIN_GPIO122, + MFP_PIN_GPIO123, + MFP_PIN_GPIO124, + MFP_PIN_GPIO125, + MFP_PIN_GPIO126, + MFP_PIN_GPIO127, + + MFP_PIN_GPIO128, + MFP_PIN_GPIO129, + MFP_PIN_GPIO130, + MFP_PIN_GPIO131, + MFP_PIN_GPIO132, + MFP_PIN_GPIO133, + MFP_PIN_GPIO134, + MFP_PIN_GPIO135, + MFP_PIN_GPIO136, + MFP_PIN_GPIO137, + MFP_PIN_GPIO138, + MFP_PIN_GPIO139, + MFP_PIN_GPIO140, + MFP_PIN_GPIO141, + MFP_PIN_GPIO142, + MFP_PIN_GPIO143, + MFP_PIN_GPIO144, + MFP_PIN_GPIO145, + MFP_PIN_GPIO146, + MFP_PIN_GPIO147, + MFP_PIN_GPIO148, + MFP_PIN_GPIO149, + MFP_PIN_GPIO150, + MFP_PIN_GPIO151, + MFP_PIN_GPIO152, + MFP_PIN_GPIO153, + MFP_PIN_GPIO154, + MFP_PIN_GPIO155, + MFP_PIN_GPIO156, + MFP_PIN_GPIO157, + MFP_PIN_GPIO158, + MFP_PIN_GPIO159, + MFP_PIN_GPIO160, + MFP_PIN_GPIO161, + MFP_PIN_GPIO162, + MFP_PIN_GPIO163, + MFP_PIN_GPIO164, + MFP_PIN_GPIO165, + MFP_PIN_GPIO166, + MFP_PIN_GPIO167, + MFP_PIN_GPIO168, + MFP_PIN_GPIO169, + MFP_PIN_GPIO170, + MFP_PIN_GPIO171, + MFP_PIN_GPIO172, + MFP_PIN_GPIO173, + MFP_PIN_GPIO174, + MFP_PIN_GPIO175, + MFP_PIN_GPIO176, + MFP_PIN_GPIO177, + MFP_PIN_GPIO178, + MFP_PIN_GPIO179, + MFP_PIN_GPIO180, + MFP_PIN_GPIO181, + MFP_PIN_GPIO182, + MFP_PIN_GPIO183, + MFP_PIN_GPIO184, + MFP_PIN_GPIO185, + MFP_PIN_GPIO186, + MFP_PIN_GPIO187, + MFP_PIN_GPIO188, + MFP_PIN_GPIO189, + MFP_PIN_GPIO190, + MFP_PIN_GPIO191, + + MFP_PIN_GPIO255 = 255, + + MFP_PIN_GPIO0_2, + MFP_PIN_GPIO1_2, + MFP_PIN_GPIO2_2, + MFP_PIN_GPIO3_2, + MFP_PIN_GPIO4_2, + MFP_PIN_GPIO5_2, + MFP_PIN_GPIO6_2, + MFP_PIN_GPIO7_2, + MFP_PIN_GPIO8_2, + MFP_PIN_GPIO9_2, + MFP_PIN_GPIO10_2, + MFP_PIN_GPIO11_2, + MFP_PIN_GPIO12_2, + MFP_PIN_GPIO13_2, + MFP_PIN_GPIO14_2, + MFP_PIN_GPIO15_2, + MFP_PIN_GPIO16_2, + MFP_PIN_GPIO17_2, + + MFP_PIN_ULPI_STP, + MFP_PIN_ULPI_NXT, + MFP_PIN_ULPI_DIR, + + MFP_PIN_nXCVREN, + MFP_PIN_DF_CLE_nOE, + MFP_PIN_DF_nADV1_ALE, + MFP_PIN_DF_SCLK_E, + MFP_PIN_DF_SCLK_S, + MFP_PIN_nBE0, + MFP_PIN_nBE1, + MFP_PIN_DF_nADV2_ALE, + MFP_PIN_DF_INT_RnB, + MFP_PIN_DF_nCS0, + MFP_PIN_DF_nCS1, + MFP_PIN_nLUA, + MFP_PIN_nLLA, + MFP_PIN_DF_nWE, + MFP_PIN_DF_ALE_nWE, + MFP_PIN_DF_nRE_nOE, + MFP_PIN_DF_ADDR0, + MFP_PIN_DF_ADDR1, + MFP_PIN_DF_ADDR2, + MFP_PIN_DF_ADDR3, + MFP_PIN_DF_IO0, + MFP_PIN_DF_IO1, + MFP_PIN_DF_IO2, + MFP_PIN_DF_IO3, + MFP_PIN_DF_IO4, + MFP_PIN_DF_IO5, + MFP_PIN_DF_IO6, + MFP_PIN_DF_IO7, + MFP_PIN_DF_IO8, + MFP_PIN_DF_IO9, + MFP_PIN_DF_IO10, + MFP_PIN_DF_IO11, + MFP_PIN_DF_IO12, + MFP_PIN_DF_IO13, + MFP_PIN_DF_IO14, + MFP_PIN_DF_IO15, + MFP_PIN_DF_nCS0_SM_nCS2, + MFP_PIN_DF_nCS1_SM_nCS3, + MFP_PIN_SM_nCS0, + MFP_PIN_SM_nCS1, + MFP_PIN_DF_WEn, + MFP_PIN_DF_REn, + MFP_PIN_DF_CLE_SM_OEn, + MFP_PIN_DF_ALE_SM_WEn, + MFP_PIN_DF_RDY0, + MFP_PIN_DF_RDY1, + + MFP_PIN_SM_SCLK, + MFP_PIN_SM_BE0, + MFP_PIN_SM_BE1, + MFP_PIN_SM_ADV, + MFP_PIN_SM_ADVMUX, + MFP_PIN_SM_RDY, + + MFP_PIN_MMC1_DAT7, + MFP_PIN_MMC1_DAT6, + MFP_PIN_MMC1_DAT5, + MFP_PIN_MMC1_DAT4, + MFP_PIN_MMC1_DAT3, + MFP_PIN_MMC1_DAT2, + MFP_PIN_MMC1_DAT1, + MFP_PIN_MMC1_DAT0, + MFP_PIN_MMC1_CMD, + MFP_PIN_MMC1_CLK, + MFP_PIN_MMC1_CD, + MFP_PIN_MMC1_WP, + + /* additional pins on PXA930 */ + MFP_PIN_GSIM_UIO, + MFP_PIN_GSIM_UCLK, + MFP_PIN_GSIM_UDET, + MFP_PIN_GSIM_nURST, + MFP_PIN_PMIC_INT, + MFP_PIN_RDY, + + MFP_PIN_MAX, +}; + +/* + * a possible MFP configuration is represented by a 32-bit integer + * + * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) + * bit 10..12 - Alternate Function Selection + * bit 13..15 - Drive Strength + * bit 16..18 - Low Power Mode State + * bit 19..20 - Low Power Mode Edge Detection + * bit 21..22 - Run Mode Pull State + * + * to facilitate the definition, the following macros are provided + * + * MFP_CFG_DEFAULT - default MFP configuration value, with + * alternate function = 0, + * drive strength = fast 3mA (MFP_DS03X) + * low power mode = default + * edge detection = none + * + * MFP_CFG - default MFPR value with alternate function + * MFP_CFG_DRV - default MFPR value with alternate function and + * pin drive strength + * MFP_CFG_LPM - default MFPR value with alternate function and + * low power mode + * MFP_CFG_X - default MFPR value with alternate function, + * pin drive strength and low power mode + */ + +typedef unsigned long mfp_cfg_t; + +#define MFP_PIN(x) ((x) & 0x3ff) + +#define MFP_AF0 (0x0 << 10) +#define MFP_AF1 (0x1 << 10) +#define MFP_AF2 (0x2 << 10) +#define MFP_AF3 (0x3 << 10) +#define MFP_AF4 (0x4 << 10) +#define MFP_AF5 (0x5 << 10) +#define MFP_AF6 (0x6 << 10) +#define MFP_AF7 (0x7 << 10) +#define MFP_AF_MASK (0x7 << 10) +#define MFP_AF(x) (((x) >> 10) & 0x7) + +#define MFP_DS01X (0x0 << 13) +#define MFP_DS02X (0x1 << 13) +#define MFP_DS03X (0x2 << 13) +#define MFP_DS04X (0x3 << 13) +#define MFP_DS06X (0x4 << 13) +#define MFP_DS08X (0x5 << 13) +#define MFP_DS10X (0x6 << 13) +#define MFP_DS13X (0x7 << 13) +#define MFP_DS_MASK (0x7 << 13) +#define MFP_DS(x) (((x) >> 13) & 0x7) + +#define MFP_LPM_DEFAULT (0x0 << 16) +#define MFP_LPM_DRIVE_LOW (0x1 << 16) +#define MFP_LPM_DRIVE_HIGH (0x2 << 16) +#define MFP_LPM_PULL_LOW (0x3 << 16) +#define MFP_LPM_PULL_HIGH (0x4 << 16) +#define MFP_LPM_FLOAT (0x5 << 16) +#define MFP_LPM_INPUT (0x6 << 16) +#define MFP_LPM_STATE_MASK (0x7 << 16) +#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) + +#define MFP_LPM_EDGE_NONE (0x0 << 19) +#define MFP_LPM_EDGE_RISE (0x1 << 19) +#define MFP_LPM_EDGE_FALL (0x2 << 19) +#define MFP_LPM_EDGE_BOTH (0x3 << 19) +#define MFP_LPM_EDGE_MASK (0x3 << 19) +#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) + +#define MFP_PULL_NONE (0x0 << 21) +#define MFP_PULL_LOW (0x1 << 21) +#define MFP_PULL_HIGH (0x2 << 21) +#define MFP_PULL_BOTH (0x3 << 21) +#define MFP_PULL_FLOAT (0x4 << 21) +#define MFP_PULL_MASK (0x7 << 21) +#define MFP_PULL(x) (((x) >> 21) & 0x7) + +#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\ + MFP_LPM_EDGE_NONE | MFP_PULL_NONE) + +#define MFP_CFG(pin, af) \ + ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) + +#define MFP_CFG_DRV(pin, af, drv) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) + +#define MFP_CFG_LPM(pin, af, lpm) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) + +#define MFP_CFG_X(pin, af, drv, lpm) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) + +#if defined(CONFIG_ARCH_PXA3XX) +/* + * each MFP pin will have a MFPR register, since the offset of the + * register varies between processors, the processor specific code + * should initialize the pin offsets by mfp_init() + * + * mfp_init_base() - accepts a virtual base for all MFPR registers and + * initialize the MFP table to a default state + * + * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which + * represents a range of MFP pins from "start" to "end", with the offset + * begining at "offset", to define a single pin, let "end" = -1. + * + * use + * + * MFP_ADDR_X() to define a range of pins + * MFP_ADDR() to define a single pin + * MFP_ADDR_END to signal the end of pin offset definitions + */ +struct mfp_addr_map { + unsigned int start; + unsigned int end; + unsigned long offset; +}; + +#define MFP_ADDR_X(start, end, offset) \ + { MFP_PIN_##start, MFP_PIN_##end, offset } + +#define MFP_ADDR(pin, offset) \ + { MFP_PIN_##pin, -1, offset } + +#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } + +void __init mfp_init_base(void __iomem *mfpr_base); +void __init mfp_init_addr(struct mfp_addr_map *map); + +/* + * mfp_{read, write}() - for direct read/write access to the MFPR register + * mfp_config() - for configuring a group of MFPR registers + * mfp_config_lpm() - configuring all low power MFPR registers for suspend + * mfp_config_run() - configuring all run time MFPR registers after resume + */ +unsigned long mfp_read(int mfp); +void mfp_write(int mfp, unsigned long mfpr_val); +void mfp_config(unsigned long *mfp_cfgs, int num); +void mfp_config_run(void); +void mfp_config_lpm(void); +void mfp_init(void); +#endif /* CONFIG_ARCH_PXA3XX */ + +#endif /* __MACH_PXA_MFP_H */ diff --git a/arch/arm/mach-pxa/include/plat/gpio.h b/arch/arm/mach-pxa/include/plat/gpio.h deleted file mode 100644 index 35f90715e0..0000000000 --- a/arch/arm/mach-pxa/include/plat/gpio.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef __PLAT_GPIO_H -#define __PLAT_GPIO_H - -#include - -/* - * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with - * one set of registers. The register offsets are organized below: - * - * GPLR GPDR GPSR GPCR GRER GFER GEDR - * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 - * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C - * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 - * - * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 - * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C - * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 - * - * NOTE: - * BANK 3 is only available on PXA27x and later processors. - * BANK 4 and 5 are only available on PXA935 - */ - -#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 - -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space, the - * actual number of the last GPIO is recorded by 'pxa_last_gpio'. - */ -extern int pxa_last_gpio; - -extern int pxa_init_gpio(int start, int end); - -#endif /* __PLAT_GPIO_H */ diff --git a/arch/arm/mach-pxa/include/plat/mfp.h b/arch/arm/mach-pxa/include/plat/mfp.h deleted file mode 100644 index aedb956cd3..0000000000 --- a/arch/arm/mach-pxa/include/plat/mfp.h +++ /dev/null @@ -1,469 +0,0 @@ -/* - * arch/arm/plat-pxa/include/plat/mfp.h - * - * Common Multi-Function Pin Definitions - * - * Copyright (C) 2007 Marvell International Ltd. - * - * 2007-8-21: eric miao - * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_PLAT_MFP_H -#define __ASM_PLAT_MFP_H - -#define mfp_to_gpio(m) ((m) % 256) - -/* list of all the configurable MFP pins */ -enum { - MFP_PIN_INVALID = -1, - - MFP_PIN_GPIO0 = 0, - MFP_PIN_GPIO1, - MFP_PIN_GPIO2, - MFP_PIN_GPIO3, - MFP_PIN_GPIO4, - MFP_PIN_GPIO5, - MFP_PIN_GPIO6, - MFP_PIN_GPIO7, - MFP_PIN_GPIO8, - MFP_PIN_GPIO9, - MFP_PIN_GPIO10, - MFP_PIN_GPIO11, - MFP_PIN_GPIO12, - MFP_PIN_GPIO13, - MFP_PIN_GPIO14, - MFP_PIN_GPIO15, - MFP_PIN_GPIO16, - MFP_PIN_GPIO17, - MFP_PIN_GPIO18, - MFP_PIN_GPIO19, - MFP_PIN_GPIO20, - MFP_PIN_GPIO21, - MFP_PIN_GPIO22, - MFP_PIN_GPIO23, - MFP_PIN_GPIO24, - MFP_PIN_GPIO25, - MFP_PIN_GPIO26, - MFP_PIN_GPIO27, - MFP_PIN_GPIO28, - MFP_PIN_GPIO29, - MFP_PIN_GPIO30, - MFP_PIN_GPIO31, - MFP_PIN_GPIO32, - MFP_PIN_GPIO33, - MFP_PIN_GPIO34, - MFP_PIN_GPIO35, - MFP_PIN_GPIO36, - MFP_PIN_GPIO37, - MFP_PIN_GPIO38, - MFP_PIN_GPIO39, - MFP_PIN_GPIO40, - MFP_PIN_GPIO41, - MFP_PIN_GPIO42, - MFP_PIN_GPIO43, - MFP_PIN_GPIO44, - MFP_PIN_GPIO45, - MFP_PIN_GPIO46, - MFP_PIN_GPIO47, - MFP_PIN_GPIO48, - MFP_PIN_GPIO49, - MFP_PIN_GPIO50, - MFP_PIN_GPIO51, - MFP_PIN_GPIO52, - MFP_PIN_GPIO53, - MFP_PIN_GPIO54, - MFP_PIN_GPIO55, - MFP_PIN_GPIO56, - MFP_PIN_GPIO57, - MFP_PIN_GPIO58, - MFP_PIN_GPIO59, - MFP_PIN_GPIO60, - MFP_PIN_GPIO61, - MFP_PIN_GPIO62, - MFP_PIN_GPIO63, - MFP_PIN_GPIO64, - MFP_PIN_GPIO65, - MFP_PIN_GPIO66, - MFP_PIN_GPIO67, - MFP_PIN_GPIO68, - MFP_PIN_GPIO69, - MFP_PIN_GPIO70, - MFP_PIN_GPIO71, - MFP_PIN_GPIO72, - MFP_PIN_GPIO73, - MFP_PIN_GPIO74, - MFP_PIN_GPIO75, - MFP_PIN_GPIO76, - MFP_PIN_GPIO77, - MFP_PIN_GPIO78, - MFP_PIN_GPIO79, - MFP_PIN_GPIO80, - MFP_PIN_GPIO81, - MFP_PIN_GPIO82, - MFP_PIN_GPIO83, - MFP_PIN_GPIO84, - MFP_PIN_GPIO85, - MFP_PIN_GPIO86, - MFP_PIN_GPIO87, - MFP_PIN_GPIO88, - MFP_PIN_GPIO89, - MFP_PIN_GPIO90, - MFP_PIN_GPIO91, - MFP_PIN_GPIO92, - MFP_PIN_GPIO93, - MFP_PIN_GPIO94, - MFP_PIN_GPIO95, - MFP_PIN_GPIO96, - MFP_PIN_GPIO97, - MFP_PIN_GPIO98, - MFP_PIN_GPIO99, - MFP_PIN_GPIO100, - MFP_PIN_GPIO101, - MFP_PIN_GPIO102, - MFP_PIN_GPIO103, - MFP_PIN_GPIO104, - MFP_PIN_GPIO105, - MFP_PIN_GPIO106, - MFP_PIN_GPIO107, - MFP_PIN_GPIO108, - MFP_PIN_GPIO109, - MFP_PIN_GPIO110, - MFP_PIN_GPIO111, - MFP_PIN_GPIO112, - MFP_PIN_GPIO113, - MFP_PIN_GPIO114, - MFP_PIN_GPIO115, - MFP_PIN_GPIO116, - MFP_PIN_GPIO117, - MFP_PIN_GPIO118, - MFP_PIN_GPIO119, - MFP_PIN_GPIO120, - MFP_PIN_GPIO121, - MFP_PIN_GPIO122, - MFP_PIN_GPIO123, - MFP_PIN_GPIO124, - MFP_PIN_GPIO125, - MFP_PIN_GPIO126, - MFP_PIN_GPIO127, - - MFP_PIN_GPIO128, - MFP_PIN_GPIO129, - MFP_PIN_GPIO130, - MFP_PIN_GPIO131, - MFP_PIN_GPIO132, - MFP_PIN_GPIO133, - MFP_PIN_GPIO134, - MFP_PIN_GPIO135, - MFP_PIN_GPIO136, - MFP_PIN_GPIO137, - MFP_PIN_GPIO138, - MFP_PIN_GPIO139, - MFP_PIN_GPIO140, - MFP_PIN_GPIO141, - MFP_PIN_GPIO142, - MFP_PIN_GPIO143, - MFP_PIN_GPIO144, - MFP_PIN_GPIO145, - MFP_PIN_GPIO146, - MFP_PIN_GPIO147, - MFP_PIN_GPIO148, - MFP_PIN_GPIO149, - MFP_PIN_GPIO150, - MFP_PIN_GPIO151, - MFP_PIN_GPIO152, - MFP_PIN_GPIO153, - MFP_PIN_GPIO154, - MFP_PIN_GPIO155, - MFP_PIN_GPIO156, - MFP_PIN_GPIO157, - MFP_PIN_GPIO158, - MFP_PIN_GPIO159, - MFP_PIN_GPIO160, - MFP_PIN_GPIO161, - MFP_PIN_GPIO162, - MFP_PIN_GPIO163, - MFP_PIN_GPIO164, - MFP_PIN_GPIO165, - MFP_PIN_GPIO166, - MFP_PIN_GPIO167, - MFP_PIN_GPIO168, - MFP_PIN_GPIO169, - MFP_PIN_GPIO170, - MFP_PIN_GPIO171, - MFP_PIN_GPIO172, - MFP_PIN_GPIO173, - MFP_PIN_GPIO174, - MFP_PIN_GPIO175, - MFP_PIN_GPIO176, - MFP_PIN_GPIO177, - MFP_PIN_GPIO178, - MFP_PIN_GPIO179, - MFP_PIN_GPIO180, - MFP_PIN_GPIO181, - MFP_PIN_GPIO182, - MFP_PIN_GPIO183, - MFP_PIN_GPIO184, - MFP_PIN_GPIO185, - MFP_PIN_GPIO186, - MFP_PIN_GPIO187, - MFP_PIN_GPIO188, - MFP_PIN_GPIO189, - MFP_PIN_GPIO190, - MFP_PIN_GPIO191, - - MFP_PIN_GPIO255 = 255, - - MFP_PIN_GPIO0_2, - MFP_PIN_GPIO1_2, - MFP_PIN_GPIO2_2, - MFP_PIN_GPIO3_2, - MFP_PIN_GPIO4_2, - MFP_PIN_GPIO5_2, - MFP_PIN_GPIO6_2, - MFP_PIN_GPIO7_2, - MFP_PIN_GPIO8_2, - MFP_PIN_GPIO9_2, - MFP_PIN_GPIO10_2, - MFP_PIN_GPIO11_2, - MFP_PIN_GPIO12_2, - MFP_PIN_GPIO13_2, - MFP_PIN_GPIO14_2, - MFP_PIN_GPIO15_2, - MFP_PIN_GPIO16_2, - MFP_PIN_GPIO17_2, - - MFP_PIN_ULPI_STP, - MFP_PIN_ULPI_NXT, - MFP_PIN_ULPI_DIR, - - MFP_PIN_nXCVREN, - MFP_PIN_DF_CLE_nOE, - MFP_PIN_DF_nADV1_ALE, - MFP_PIN_DF_SCLK_E, - MFP_PIN_DF_SCLK_S, - MFP_PIN_nBE0, - MFP_PIN_nBE1, - MFP_PIN_DF_nADV2_ALE, - MFP_PIN_DF_INT_RnB, - MFP_PIN_DF_nCS0, - MFP_PIN_DF_nCS1, - MFP_PIN_nLUA, - MFP_PIN_nLLA, - MFP_PIN_DF_nWE, - MFP_PIN_DF_ALE_nWE, - MFP_PIN_DF_nRE_nOE, - MFP_PIN_DF_ADDR0, - MFP_PIN_DF_ADDR1, - MFP_PIN_DF_ADDR2, - MFP_PIN_DF_ADDR3, - MFP_PIN_DF_IO0, - MFP_PIN_DF_IO1, - MFP_PIN_DF_IO2, - MFP_PIN_DF_IO3, - MFP_PIN_DF_IO4, - MFP_PIN_DF_IO5, - MFP_PIN_DF_IO6, - MFP_PIN_DF_IO7, - MFP_PIN_DF_IO8, - MFP_PIN_DF_IO9, - MFP_PIN_DF_IO10, - MFP_PIN_DF_IO11, - MFP_PIN_DF_IO12, - MFP_PIN_DF_IO13, - MFP_PIN_DF_IO14, - MFP_PIN_DF_IO15, - MFP_PIN_DF_nCS0_SM_nCS2, - MFP_PIN_DF_nCS1_SM_nCS3, - MFP_PIN_SM_nCS0, - MFP_PIN_SM_nCS1, - MFP_PIN_DF_WEn, - MFP_PIN_DF_REn, - MFP_PIN_DF_CLE_SM_OEn, - MFP_PIN_DF_ALE_SM_WEn, - MFP_PIN_DF_RDY0, - MFP_PIN_DF_RDY1, - - MFP_PIN_SM_SCLK, - MFP_PIN_SM_BE0, - MFP_PIN_SM_BE1, - MFP_PIN_SM_ADV, - MFP_PIN_SM_ADVMUX, - MFP_PIN_SM_RDY, - - MFP_PIN_MMC1_DAT7, - MFP_PIN_MMC1_DAT6, - MFP_PIN_MMC1_DAT5, - MFP_PIN_MMC1_DAT4, - MFP_PIN_MMC1_DAT3, - MFP_PIN_MMC1_DAT2, - MFP_PIN_MMC1_DAT1, - MFP_PIN_MMC1_DAT0, - MFP_PIN_MMC1_CMD, - MFP_PIN_MMC1_CLK, - MFP_PIN_MMC1_CD, - MFP_PIN_MMC1_WP, - - /* additional pins on PXA930 */ - MFP_PIN_GSIM_UIO, - MFP_PIN_GSIM_UCLK, - MFP_PIN_GSIM_UDET, - MFP_PIN_GSIM_nURST, - MFP_PIN_PMIC_INT, - MFP_PIN_RDY, - - MFP_PIN_MAX, -}; - -/* - * a possible MFP configuration is represented by a 32-bit integer - * - * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) - * bit 10..12 - Alternate Function Selection - * bit 13..15 - Drive Strength - * bit 16..18 - Low Power Mode State - * bit 19..20 - Low Power Mode Edge Detection - * bit 21..22 - Run Mode Pull State - * - * to facilitate the definition, the following macros are provided - * - * MFP_CFG_DEFAULT - default MFP configuration value, with - * alternate function = 0, - * drive strength = fast 3mA (MFP_DS03X) - * low power mode = default - * edge detection = none - * - * MFP_CFG - default MFPR value with alternate function - * MFP_CFG_DRV - default MFPR value with alternate function and - * pin drive strength - * MFP_CFG_LPM - default MFPR value with alternate function and - * low power mode - * MFP_CFG_X - default MFPR value with alternate function, - * pin drive strength and low power mode - */ - -typedef unsigned long mfp_cfg_t; - -#define MFP_PIN(x) ((x) & 0x3ff) - -#define MFP_AF0 (0x0 << 10) -#define MFP_AF1 (0x1 << 10) -#define MFP_AF2 (0x2 << 10) -#define MFP_AF3 (0x3 << 10) -#define MFP_AF4 (0x4 << 10) -#define MFP_AF5 (0x5 << 10) -#define MFP_AF6 (0x6 << 10) -#define MFP_AF7 (0x7 << 10) -#define MFP_AF_MASK (0x7 << 10) -#define MFP_AF(x) (((x) >> 10) & 0x7) - -#define MFP_DS01X (0x0 << 13) -#define MFP_DS02X (0x1 << 13) -#define MFP_DS03X (0x2 << 13) -#define MFP_DS04X (0x3 << 13) -#define MFP_DS06X (0x4 << 13) -#define MFP_DS08X (0x5 << 13) -#define MFP_DS10X (0x6 << 13) -#define MFP_DS13X (0x7 << 13) -#define MFP_DS_MASK (0x7 << 13) -#define MFP_DS(x) (((x) >> 13) & 0x7) - -#define MFP_LPM_DEFAULT (0x0 << 16) -#define MFP_LPM_DRIVE_LOW (0x1 << 16) -#define MFP_LPM_DRIVE_HIGH (0x2 << 16) -#define MFP_LPM_PULL_LOW (0x3 << 16) -#define MFP_LPM_PULL_HIGH (0x4 << 16) -#define MFP_LPM_FLOAT (0x5 << 16) -#define MFP_LPM_INPUT (0x6 << 16) -#define MFP_LPM_STATE_MASK (0x7 << 16) -#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) - -#define MFP_LPM_EDGE_NONE (0x0 << 19) -#define MFP_LPM_EDGE_RISE (0x1 << 19) -#define MFP_LPM_EDGE_FALL (0x2 << 19) -#define MFP_LPM_EDGE_BOTH (0x3 << 19) -#define MFP_LPM_EDGE_MASK (0x3 << 19) -#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) - -#define MFP_PULL_NONE (0x0 << 21) -#define MFP_PULL_LOW (0x1 << 21) -#define MFP_PULL_HIGH (0x2 << 21) -#define MFP_PULL_BOTH (0x3 << 21) -#define MFP_PULL_FLOAT (0x4 << 21) -#define MFP_PULL_MASK (0x7 << 21) -#define MFP_PULL(x) (((x) >> 21) & 0x7) - -#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\ - MFP_LPM_EDGE_NONE | MFP_PULL_NONE) - -#define MFP_CFG(pin, af) \ - ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) - -#define MFP_CFG_DRV(pin, af, drv) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) - -#define MFP_CFG_LPM(pin, af, lpm) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) - -#define MFP_CFG_X(pin, af, drv, lpm) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) - -#if defined(CONFIG_ARCH_PXA3XX) -/* - * each MFP pin will have a MFPR register, since the offset of the - * register varies between processors, the processor specific code - * should initialize the pin offsets by mfp_init() - * - * mfp_init_base() - accepts a virtual base for all MFPR registers and - * initialize the MFP table to a default state - * - * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which - * represents a range of MFP pins from "start" to "end", with the offset - * begining at "offset", to define a single pin, let "end" = -1. - * - * use - * - * MFP_ADDR_X() to define a range of pins - * MFP_ADDR() to define a single pin - * MFP_ADDR_END to signal the end of pin offset definitions - */ -struct mfp_addr_map { - unsigned int start; - unsigned int end; - unsigned long offset; -}; - -#define MFP_ADDR_X(start, end, offset) \ - { MFP_PIN_##start, MFP_PIN_##end, offset } - -#define MFP_ADDR(pin, offset) \ - { MFP_PIN_##pin, -1, offset } - -#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } - -void __init mfp_init_base(void __iomem *mfpr_base); -void __init mfp_init_addr(struct mfp_addr_map *map); - -/* - * mfp_{read, write}() - for direct read/write access to the MFPR register - * mfp_config() - for configuring a group of MFPR registers - * mfp_config_lpm() - configuring all low power MFPR registers for suspend - * mfp_config_run() - configuring all run time MFPR registers after resume - */ -unsigned long mfp_read(int mfp); -void mfp_write(int mfp, unsigned long mfpr_val); -void mfp_config(unsigned long *mfp_cfgs, int num); -void mfp_config_run(void); -void mfp_config_lpm(void); -void mfp_init(void); -#endif /* CONFIG_ARCH_PXA3XX */ - -#endif /* __ASM_PLAT_MFP_H */ diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index df4922453d..af80ab24ad 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #define MFPR_SIZE (PAGE_SIZE) -- 2.30.2