* [PATCH 0/2] i.MX: Remove support for old boards
@ 2023-03-02 10:52 Sascha Hauer
2023-03-02 10:52 ` [PATCH 1/2] ARM: i.MX: Remove " Sascha Hauer
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Sascha Hauer @ 2023-03-02 10:52 UTC (permalink / raw)
To: Barebox List
This removes a bunch of old boards that nobody showed interest in for a
long time:
Freescale boards
================
MACH_IMX21ADS
MACH_IMX27ADS
MACH_FREESCALE_MX25_3STACK
MACH_FREESCALE_MX35_3STACK
MACH_FREESCALE_MX53_SMD
Eukrea boards
=============
MACH_EUKREA_CPUIMX25
MACH_EUKREA_CPUIMX27
MACH_EUKREA_CPUIMX35
MACH_EUKREA_CPUIMX51SD
Garz+Fricke boards
==================
MACH_NESO
MACH_GUF_CUPID
Phytec boards
=============
MACH_PCM037
MACH_PCM043
Amazon boards
=============
MACH_KINDLE3
The boards all have in common that they do not support device trees and
also don't have multi-image support.
If you are still using these boards and wish them to be supported please
speak up.
Sascha
Sascha Hauer (2):
ARM: i.MX: Remove old boards
ARM: i.MX: Remove config CONFIG_ARCH_TEXT_BASE
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 17 -
arch/arm/boards/Makefile | 14 -
arch/arm/boards/eukrea_cpuimx25/Makefile | 6 -
.../defaultenv-eukrea_cpuimx25/bin/init_board | 41 --
.../defaultenv-eukrea_cpuimx25/config | 47 --
.../boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 218 ---------
.../eukrea_cpuimx25/flash-header.imxcfg | 19 -
arch/arm/boards/eukrea_cpuimx25/lowlevel.c | 122 -----
arch/arm/boards/eukrea_cpuimx27/Makefile | 4 -
.../boards/eukrea_cpuimx27/env/bin/_update | 36 --
arch/arm/boards/eukrea_cpuimx27/env/bin/boot | 53 --
arch/arm/boards/eukrea_cpuimx27/env/bin/init | 43 --
.../eukrea_cpuimx27/env/bin/update_kernel | 15 -
.../eukrea_cpuimx27/env/bin/update_root | 16 -
arch/arm/boards/eukrea_cpuimx27/env/config | 36 --
.../boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 240 ---------
.../boards/eukrea_cpuimx27/lowlevel_init.S | 136 ------
arch/arm/boards/eukrea_cpuimx35/Makefile | 6 -
.../defaultenv-eukrea_cpuimx35/bin/init_board | 41 --
.../defaultenv-eukrea_cpuimx35/config | 47 --
.../boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 346 -------------
.../eukrea_cpuimx35/flash-header.imxcfg | 21 -
arch/arm/boards/eukrea_cpuimx35/lowlevel.c | 128 -----
arch/arm/boards/eukrea_cpuimx51/Makefile | 5 -
.../defaultenv-eukrea_cpuimx51/bin/init_board | 20 -
.../defaultenv-eukrea_cpuimx51/config | 50 --
.../boards/eukrea_cpuimx51/eukrea_cpuimx51.c | 134 ------
.../eukrea_cpuimx51/flash-header.imxcfg | 61 ---
arch/arm/boards/eukrea_cpuimx51/lowlevel.c | 13 -
arch/arm/boards/freescale-mx21-ads/Makefile | 4 -
.../boards/freescale-mx21-ads/env/bin/init | 1 -
arch/arm/boards/freescale-mx21-ads/imx21ads.c | 180 -------
.../boards/freescale-mx21-ads/lowlevel_init.S | 131 -----
arch/arm/boards/freescale-mx25-3ds/3stack.c | 210 --------
arch/arm/boards/freescale-mx25-3ds/Makefile | 6 -
.../defaultenv-freescale-mx25-3ds/bin/_update | 36 --
.../defaultenv-freescale-mx25-3ds/bin/boot | 47 --
.../defaultenv-freescale-mx25-3ds/bin/init | 26 -
.../bin/update_kernel | 15 -
.../bin/update_root | 16 -
.../defaultenv-freescale-mx25-3ds/config | 29 --
.../freescale-mx25-3ds/flash-header.imxcfg | 44 --
.../boards/freescale-mx25-3ds/lowlevel_init.S | 213 --------
arch/arm/boards/freescale-mx27-ads/Makefile | 4 -
.../boards/freescale-mx27-ads/env/bin/_update | 36 --
.../boards/freescale-mx27-ads/env/bin/boot | 38 --
.../boards/freescale-mx27-ads/env/bin/init | 20 -
.../freescale-mx27-ads/env/bin/update_kernel | 8 -
.../freescale-mx27-ads/env/bin/update_root | 8 -
arch/arm/boards/freescale-mx27-ads/env/config | 25 -
arch/arm/boards/freescale-mx27-ads/imx27ads.c | 110 -----
.../boards/freescale-mx27-ads/lowlevel_init.S | 116 -----
arch/arm/boards/freescale-mx35-3ds/3stack.c | 454 ------------------
arch/arm/boards/freescale-mx35-3ds/Makefile | 5 -
.../freescale-mx35-3ds/board-mx35_3stack.h | 86 ----
.../defaultenv-freescale-mx35-3ds/config | 51 --
.../freescale-mx35-3ds/flash-header.imxcfg | 36 --
.../boards/freescale-mx35-3ds/lowlevel_init.S | 241 ----------
arch/arm/boards/freescale-mx53-smd/Makefile | 5 -
arch/arm/boards/freescale-mx53-smd/board.c | 156 ------
.../defaultenv-freescale-mx53-smd/config | 45 --
.../freescale-mx53-smd/flash-header.imxcfg | 56 ---
arch/arm/boards/freescale-mx53-smd/lowlevel.c | 14 -
arch/arm/boards/guf-cupid/Makefile | 6 -
arch/arm/boards/guf-cupid/board.c | 339 -------------
.../guf-cupid/defaultenv-guf-cupid/config | 50 --
arch/arm/boards/guf-cupid/lowlevel.c | 301 ------------
arch/arm/boards/guf-neso/Makefile | 6 -
arch/arm/boards/guf-neso/board.c | 318 ------------
.../guf-neso/defaultenv-guf-neso/config | 47 --
arch/arm/boards/guf-neso/lowlevel.c | 81 ----
arch/arm/boards/guf-neso/pll_init.S | 53 --
arch/arm/boards/kindle3/Makefile | 4 -
arch/arm/boards/kindle3/env/boot/mmc_kernel | 7 -
arch/arm/boards/kindle3/env/init/serials | 21 -
arch/arm/boards/kindle3/env/init/usbconsole | 8 -
.../boards/kindle3/env/nv/autoboot_timeout | 1 -
arch/arm/boards/kindle3/env/nv/boot.default | 1 -
.../boards/kindle3/env/nv/linux.bootargs.base | 1 -
.../kindle3/env/nv/linux.bootargs.console | 1 -
.../boards/kindle3/env/nv/linux.bootargs.lpj | 1 -
arch/arm/boards/kindle3/flash-header.imxcfg | 26 -
arch/arm/boards/kindle3/kindle3.c | 304 ------------
arch/arm/boards/kindle3/lowlevel.c | 127 -----
arch/arm/boards/phytec-phycore-imx31/Makefile | 5 -
.../phytec-phycore-imx31/env/boot/nand-ubi | 5 -
.../env/init/mtdparts-nand | 6 -
.../env/init/mtdparts-nor | 6 -
.../boards/phytec-phycore-imx31/lowlevel.c | 118 -----
arch/arm/boards/phytec-phycore-imx31/pcm037.c | 240 ---------
arch/arm/boards/phytec-phycore-imx35/Makefile | 5 -
.../phytec-phycore-imx35/env/boot/nand-ubi | 5 -
.../env/init/mtdparts-nand | 6 -
.../env/init/mtdparts-nor | 6 -
.../phytec-phycore-imx35/flash-header.imxcfg | 39 --
.../boards/phytec-phycore-imx35/lowlevel.c | 179 -------
arch/arm/boards/phytec-phycore-imx35/pcm043.c | 313 ------------
arch/arm/configs/cupid_defconfig | 70 ---
arch/arm/configs/eukrea_cpuimx25_defconfig | 87 ----
arch/arm/configs/eukrea_cpuimx27_defconfig | 53 --
arch/arm/configs/eukrea_cpuimx35_defconfig | 95 ----
arch/arm/configs/eukrea_cpuimx51_defconfig | 68 ---
arch/arm/configs/freescale-mx25-3ds_defconfig | 56 ---
arch/arm/configs/freescale-mx27-ads_defconfig | 35 --
arch/arm/configs/freescale-mx35-3ds_defconfig | 62 ---
arch/arm/configs/freescale-mx53-smd_defconfig | 61 ---
arch/arm/configs/kindle3_defconfig | 67 ---
arch/arm/configs/neso_defconfig | 68 ---
.../configs/phytec-phycore-imx31_defconfig | 82 ----
.../configs/phytec-phycore-imx35_defconfig | 86 ----
arch/arm/mach-imx/Kconfig | 260 ----------
112 files changed, 2 insertions(+), 8193 deletions(-)
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/Makefile
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/defaultenv-eukrea_cpuimx25/bin/init_board
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/defaultenv-eukrea_cpuimx25/config
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/flash-header.imxcfg
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/lowlevel.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/Makefile
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/bin/_update
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/bin/boot
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/bin/init
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/bin/update_kernel
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/bin/update_root
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/config
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/Makefile
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/defaultenv-eukrea_cpuimx35/bin/init_board
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/defaultenv-eukrea_cpuimx35/config
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/flash-header.imxcfg
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/lowlevel.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/Makefile
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/defaultenv-eukrea_cpuimx51/bin/init_board
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/defaultenv-eukrea_cpuimx51/config
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/flash-header.imxcfg
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/lowlevel.c
delete mode 100644 arch/arm/boards/freescale-mx21-ads/Makefile
delete mode 100644 arch/arm/boards/freescale-mx21-ads/env/bin/init
delete mode 100644 arch/arm/boards/freescale-mx21-ads/imx21ads.c
delete mode 100644 arch/arm/boards/freescale-mx21-ads/lowlevel_init.S
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/3stack.c
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/Makefile
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/_update
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/boot
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/init
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/update_kernel
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/update_root
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/config
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/flash-header.imxcfg
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/lowlevel_init.S
delete mode 100644 arch/arm/boards/freescale-mx27-ads/Makefile
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/bin/_update
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/bin/boot
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/bin/init
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/bin/update_kernel
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/bin/update_root
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/config
delete mode 100644 arch/arm/boards/freescale-mx27-ads/imx27ads.c
delete mode 100644 arch/arm/boards/freescale-mx27-ads/lowlevel_init.S
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/3stack.c
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/Makefile
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/board-mx35_3stack.h
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/defaultenv-freescale-mx35-3ds/config
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/flash-header.imxcfg
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/lowlevel_init.S
delete mode 100644 arch/arm/boards/freescale-mx53-smd/Makefile
delete mode 100644 arch/arm/boards/freescale-mx53-smd/board.c
delete mode 100644 arch/arm/boards/freescale-mx53-smd/defaultenv-freescale-mx53-smd/config
delete mode 100644 arch/arm/boards/freescale-mx53-smd/flash-header.imxcfg
delete mode 100644 arch/arm/boards/freescale-mx53-smd/lowlevel.c
delete mode 100644 arch/arm/boards/guf-cupid/Makefile
delete mode 100644 arch/arm/boards/guf-cupid/board.c
delete mode 100644 arch/arm/boards/guf-cupid/defaultenv-guf-cupid/config
delete mode 100644 arch/arm/boards/guf-cupid/lowlevel.c
delete mode 100644 arch/arm/boards/guf-neso/Makefile
delete mode 100644 arch/arm/boards/guf-neso/board.c
delete mode 100644 arch/arm/boards/guf-neso/defaultenv-guf-neso/config
delete mode 100644 arch/arm/boards/guf-neso/lowlevel.c
delete mode 100644 arch/arm/boards/guf-neso/pll_init.S
delete mode 100644 arch/arm/boards/kindle3/Makefile
delete mode 100644 arch/arm/boards/kindle3/env/boot/mmc_kernel
delete mode 100644 arch/arm/boards/kindle3/env/init/serials
delete mode 100644 arch/arm/boards/kindle3/env/init/usbconsole
delete mode 100644 arch/arm/boards/kindle3/env/nv/autoboot_timeout
delete mode 100644 arch/arm/boards/kindle3/env/nv/boot.default
delete mode 100644 arch/arm/boards/kindle3/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/kindle3/env/nv/linux.bootargs.console
delete mode 100644 arch/arm/boards/kindle3/env/nv/linux.bootargs.lpj
delete mode 100644 arch/arm/boards/kindle3/flash-header.imxcfg
delete mode 100644 arch/arm/boards/kindle3/kindle3.c
delete mode 100644 arch/arm/boards/kindle3/lowlevel.c
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/Makefile
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/env/boot/nand-ubi
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/env/init/mtdparts-nand
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/env/init/mtdparts-nor
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/lowlevel.c
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/pcm037.c
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/Makefile
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/env/boot/nand-ubi
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/env/init/mtdparts-nand
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/env/init/mtdparts-nor
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/flash-header.imxcfg
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/lowlevel.c
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/pcm043.c
delete mode 100644 arch/arm/configs/cupid_defconfig
delete mode 100644 arch/arm/configs/eukrea_cpuimx25_defconfig
delete mode 100644 arch/arm/configs/eukrea_cpuimx27_defconfig
delete mode 100644 arch/arm/configs/eukrea_cpuimx35_defconfig
delete mode 100644 arch/arm/configs/eukrea_cpuimx51_defconfig
delete mode 100644 arch/arm/configs/freescale-mx25-3ds_defconfig
delete mode 100644 arch/arm/configs/freescale-mx27-ads_defconfig
delete mode 100644 arch/arm/configs/freescale-mx35-3ds_defconfig
delete mode 100644 arch/arm/configs/freescale-mx53-smd_defconfig
delete mode 100644 arch/arm/configs/kindle3_defconfig
delete mode 100644 arch/arm/configs/neso_defconfig
delete mode 100644 arch/arm/configs/phytec-phycore-imx31_defconfig
delete mode 100644 arch/arm/configs/phytec-phycore-imx35_defconfig
--
2.30.2
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] ARM: i.MX: Remove old boards
2023-03-02 10:52 [PATCH 0/2] i.MX: Remove support for old boards Sascha Hauer
@ 2023-03-02 10:52 ` Sascha Hauer
2023-03-02 10:52 ` [PATCH 2/2] ARM: i.MX: Remove config CONFIG_ARCH_TEXT_BASE Sascha Hauer
2023-03-03 8:56 ` [PATCH 0/2] i.MX: Remove support for old boards Marco Felsch
2 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2023-03-02 10:52 UTC (permalink / raw)
To: Barebox List
This removes a bunch of old boards that nobody showed interest in
for a long time:
Freescale boards
================
MACH_IMX21ADS
MACH_IMX27ADS
MACH_FREESCALE_MX25_3STACK
MACH_FREESCALE_MX35_3STACK
MACH_FREESCALE_MX53_SMD
Eukrea boards
=============
MACH_EUKREA_CPUIMX25
MACH_EUKREA_CPUIMX27
MACH_EUKREA_CPUIMX35
MACH_EUKREA_CPUIMX51SD
Garz+Fricke boards
==================
MACH_NESO
MACH_GUF_CUPID
Phytec boards
=============
MACH_PCM037
MACH_PCM043
Amazon boards
=============
MACH_KINDLE3
All these boards have not been converted to device tree nor do they
support multi-image generation. As they are becoming a maintenance
burden remove them now.
A board can always be added back once it is ported to support the
recent barebox interfaces.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 17 -
arch/arm/boards/Makefile | 14 -
arch/arm/boards/eukrea_cpuimx25/Makefile | 6 -
.../defaultenv-eukrea_cpuimx25/bin/init_board | 41 --
.../defaultenv-eukrea_cpuimx25/config | 47 --
.../boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 218 ---------
| 19 -
arch/arm/boards/eukrea_cpuimx25/lowlevel.c | 122 -----
arch/arm/boards/eukrea_cpuimx27/Makefile | 4 -
.../boards/eukrea_cpuimx27/env/bin/_update | 36 --
arch/arm/boards/eukrea_cpuimx27/env/bin/boot | 53 --
arch/arm/boards/eukrea_cpuimx27/env/bin/init | 43 --
.../eukrea_cpuimx27/env/bin/update_kernel | 15 -
.../eukrea_cpuimx27/env/bin/update_root | 16 -
arch/arm/boards/eukrea_cpuimx27/env/config | 36 --
.../boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 240 ---------
.../boards/eukrea_cpuimx27/lowlevel_init.S | 136 ------
arch/arm/boards/eukrea_cpuimx35/Makefile | 6 -
.../defaultenv-eukrea_cpuimx35/bin/init_board | 41 --
.../defaultenv-eukrea_cpuimx35/config | 47 --
.../boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 346 -------------
| 21 -
arch/arm/boards/eukrea_cpuimx35/lowlevel.c | 128 -----
arch/arm/boards/eukrea_cpuimx51/Makefile | 5 -
.../defaultenv-eukrea_cpuimx51/bin/init_board | 20 -
.../defaultenv-eukrea_cpuimx51/config | 50 --
.../boards/eukrea_cpuimx51/eukrea_cpuimx51.c | 134 ------
| 61 ---
arch/arm/boards/eukrea_cpuimx51/lowlevel.c | 13 -
arch/arm/boards/freescale-mx21-ads/Makefile | 4 -
.../boards/freescale-mx21-ads/env/bin/init | 1 -
arch/arm/boards/freescale-mx21-ads/imx21ads.c | 180 -------
.../boards/freescale-mx21-ads/lowlevel_init.S | 131 -----
arch/arm/boards/freescale-mx25-3ds/3stack.c | 210 --------
arch/arm/boards/freescale-mx25-3ds/Makefile | 6 -
.../defaultenv-freescale-mx25-3ds/bin/_update | 36 --
.../defaultenv-freescale-mx25-3ds/bin/boot | 47 --
.../defaultenv-freescale-mx25-3ds/bin/init | 26 -
.../bin/update_kernel | 15 -
.../bin/update_root | 16 -
.../defaultenv-freescale-mx25-3ds/config | 29 --
| 44 --
.../boards/freescale-mx25-3ds/lowlevel_init.S | 213 --------
arch/arm/boards/freescale-mx27-ads/Makefile | 4 -
.../boards/freescale-mx27-ads/env/bin/_update | 36 --
.../boards/freescale-mx27-ads/env/bin/boot | 38 --
.../boards/freescale-mx27-ads/env/bin/init | 20 -
.../freescale-mx27-ads/env/bin/update_kernel | 8 -
.../freescale-mx27-ads/env/bin/update_root | 8 -
arch/arm/boards/freescale-mx27-ads/env/config | 25 -
arch/arm/boards/freescale-mx27-ads/imx27ads.c | 110 -----
.../boards/freescale-mx27-ads/lowlevel_init.S | 116 -----
arch/arm/boards/freescale-mx35-3ds/3stack.c | 454 ------------------
arch/arm/boards/freescale-mx35-3ds/Makefile | 5 -
.../freescale-mx35-3ds/board-mx35_3stack.h | 86 ----
.../defaultenv-freescale-mx35-3ds/config | 51 --
| 36 --
.../boards/freescale-mx35-3ds/lowlevel_init.S | 241 ----------
arch/arm/boards/freescale-mx53-smd/Makefile | 5 -
arch/arm/boards/freescale-mx53-smd/board.c | 156 ------
.../defaultenv-freescale-mx53-smd/config | 45 --
| 56 ---
arch/arm/boards/freescale-mx53-smd/lowlevel.c | 14 -
arch/arm/boards/guf-cupid/Makefile | 6 -
arch/arm/boards/guf-cupid/board.c | 339 -------------
.../guf-cupid/defaultenv-guf-cupid/config | 50 --
arch/arm/boards/guf-cupid/lowlevel.c | 301 ------------
arch/arm/boards/guf-neso/Makefile | 6 -
arch/arm/boards/guf-neso/board.c | 318 ------------
.../guf-neso/defaultenv-guf-neso/config | 47 --
arch/arm/boards/guf-neso/lowlevel.c | 81 ----
arch/arm/boards/guf-neso/pll_init.S | 53 --
arch/arm/boards/kindle3/Makefile | 4 -
arch/arm/boards/kindle3/env/boot/mmc_kernel | 7 -
arch/arm/boards/kindle3/env/init/serials | 21 -
arch/arm/boards/kindle3/env/init/usbconsole | 8 -
.../boards/kindle3/env/nv/autoboot_timeout | 1 -
arch/arm/boards/kindle3/env/nv/boot.default | 1 -
.../boards/kindle3/env/nv/linux.bootargs.base | 1 -
.../kindle3/env/nv/linux.bootargs.console | 1 -
.../boards/kindle3/env/nv/linux.bootargs.lpj | 1 -
| 26 -
arch/arm/boards/kindle3/kindle3.c | 304 ------------
arch/arm/boards/kindle3/lowlevel.c | 127 -----
arch/arm/boards/phytec-phycore-imx31/Makefile | 5 -
.../phytec-phycore-imx31/env/boot/nand-ubi | 5 -
.../env/init/mtdparts-nand | 6 -
.../env/init/mtdparts-nor | 6 -
.../boards/phytec-phycore-imx31/lowlevel.c | 118 -----
arch/arm/boards/phytec-phycore-imx31/pcm037.c | 240 ---------
arch/arm/boards/phytec-phycore-imx35/Makefile | 5 -
.../phytec-phycore-imx35/env/boot/nand-ubi | 5 -
.../env/init/mtdparts-nand | 6 -
.../env/init/mtdparts-nor | 6 -
| 39 --
.../boards/phytec-phycore-imx35/lowlevel.c | 179 -------
arch/arm/boards/phytec-phycore-imx35/pcm043.c | 313 ------------
arch/arm/configs/cupid_defconfig | 70 ---
arch/arm/configs/eukrea_cpuimx25_defconfig | 87 ----
arch/arm/configs/eukrea_cpuimx27_defconfig | 53 --
arch/arm/configs/eukrea_cpuimx35_defconfig | 95 ----
arch/arm/configs/eukrea_cpuimx51_defconfig | 68 ---
arch/arm/configs/freescale-mx25-3ds_defconfig | 56 ---
arch/arm/configs/freescale-mx27-ads_defconfig | 35 --
arch/arm/configs/freescale-mx35-3ds_defconfig | 62 ---
arch/arm/configs/freescale-mx53-smd_defconfig | 61 ---
arch/arm/configs/kindle3_defconfig | 67 ---
arch/arm/configs/neso_defconfig | 68 ---
.../configs/phytec-phycore-imx31_defconfig | 82 ----
.../configs/phytec-phycore-imx35_defconfig | 86 ----
arch/arm/mach-imx/Kconfig | 237 ---------
112 files changed, 2 insertions(+), 8170 deletions(-)
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/Makefile
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/defaultenv-eukrea_cpuimx25/bin/init_board
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/defaultenv-eukrea_cpuimx25/config
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/flash-header.imxcfg
delete mode 100644 arch/arm/boards/eukrea_cpuimx25/lowlevel.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/Makefile
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/bin/_update
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/bin/boot
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/bin/init
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/bin/update_kernel
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/bin/update_root
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/env/config
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/Makefile
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/defaultenv-eukrea_cpuimx35/bin/init_board
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/defaultenv-eukrea_cpuimx35/config
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/flash-header.imxcfg
delete mode 100644 arch/arm/boards/eukrea_cpuimx35/lowlevel.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/Makefile
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/defaultenv-eukrea_cpuimx51/bin/init_board
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/defaultenv-eukrea_cpuimx51/config
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/flash-header.imxcfg
delete mode 100644 arch/arm/boards/eukrea_cpuimx51/lowlevel.c
delete mode 100644 arch/arm/boards/freescale-mx21-ads/Makefile
delete mode 100644 arch/arm/boards/freescale-mx21-ads/env/bin/init
delete mode 100644 arch/arm/boards/freescale-mx21-ads/imx21ads.c
delete mode 100644 arch/arm/boards/freescale-mx21-ads/lowlevel_init.S
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/3stack.c
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/Makefile
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/_update
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/boot
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/init
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/update_kernel
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/update_root
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/config
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/flash-header.imxcfg
delete mode 100644 arch/arm/boards/freescale-mx25-3ds/lowlevel_init.S
delete mode 100644 arch/arm/boards/freescale-mx27-ads/Makefile
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/bin/_update
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/bin/boot
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/bin/init
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/bin/update_kernel
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/bin/update_root
delete mode 100644 arch/arm/boards/freescale-mx27-ads/env/config
delete mode 100644 arch/arm/boards/freescale-mx27-ads/imx27ads.c
delete mode 100644 arch/arm/boards/freescale-mx27-ads/lowlevel_init.S
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/3stack.c
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/Makefile
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/board-mx35_3stack.h
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/defaultenv-freescale-mx35-3ds/config
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/flash-header.imxcfg
delete mode 100644 arch/arm/boards/freescale-mx35-3ds/lowlevel_init.S
delete mode 100644 arch/arm/boards/freescale-mx53-smd/Makefile
delete mode 100644 arch/arm/boards/freescale-mx53-smd/board.c
delete mode 100644 arch/arm/boards/freescale-mx53-smd/defaultenv-freescale-mx53-smd/config
delete mode 100644 arch/arm/boards/freescale-mx53-smd/flash-header.imxcfg
delete mode 100644 arch/arm/boards/freescale-mx53-smd/lowlevel.c
delete mode 100644 arch/arm/boards/guf-cupid/Makefile
delete mode 100644 arch/arm/boards/guf-cupid/board.c
delete mode 100644 arch/arm/boards/guf-cupid/defaultenv-guf-cupid/config
delete mode 100644 arch/arm/boards/guf-cupid/lowlevel.c
delete mode 100644 arch/arm/boards/guf-neso/Makefile
delete mode 100644 arch/arm/boards/guf-neso/board.c
delete mode 100644 arch/arm/boards/guf-neso/defaultenv-guf-neso/config
delete mode 100644 arch/arm/boards/guf-neso/lowlevel.c
delete mode 100644 arch/arm/boards/guf-neso/pll_init.S
delete mode 100644 arch/arm/boards/kindle3/Makefile
delete mode 100644 arch/arm/boards/kindle3/env/boot/mmc_kernel
delete mode 100644 arch/arm/boards/kindle3/env/init/serials
delete mode 100644 arch/arm/boards/kindle3/env/init/usbconsole
delete mode 100644 arch/arm/boards/kindle3/env/nv/autoboot_timeout
delete mode 100644 arch/arm/boards/kindle3/env/nv/boot.default
delete mode 100644 arch/arm/boards/kindle3/env/nv/linux.bootargs.base
delete mode 100644 arch/arm/boards/kindle3/env/nv/linux.bootargs.console
delete mode 100644 arch/arm/boards/kindle3/env/nv/linux.bootargs.lpj
delete mode 100644 arch/arm/boards/kindle3/flash-header.imxcfg
delete mode 100644 arch/arm/boards/kindle3/kindle3.c
delete mode 100644 arch/arm/boards/kindle3/lowlevel.c
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/Makefile
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/env/boot/nand-ubi
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/env/init/mtdparts-nand
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/env/init/mtdparts-nor
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/lowlevel.c
delete mode 100644 arch/arm/boards/phytec-phycore-imx31/pcm037.c
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/Makefile
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/env/boot/nand-ubi
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/env/init/mtdparts-nand
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/env/init/mtdparts-nor
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/flash-header.imxcfg
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/lowlevel.c
delete mode 100644 arch/arm/boards/phytec-phycore-imx35/pcm043.c
delete mode 100644 arch/arm/configs/cupid_defconfig
delete mode 100644 arch/arm/configs/eukrea_cpuimx25_defconfig
delete mode 100644 arch/arm/configs/eukrea_cpuimx27_defconfig
delete mode 100644 arch/arm/configs/eukrea_cpuimx35_defconfig
delete mode 100644 arch/arm/configs/eukrea_cpuimx51_defconfig
delete mode 100644 arch/arm/configs/freescale-mx25-3ds_defconfig
delete mode 100644 arch/arm/configs/freescale-mx27-ads_defconfig
delete mode 100644 arch/arm/configs/freescale-mx35-3ds_defconfig
delete mode 100644 arch/arm/configs/freescale-mx53-smd_defconfig
delete mode 100644 arch/arm/configs/kindle3_defconfig
delete mode 100644 arch/arm/configs/neso_defconfig
delete mode 100644 arch/arm/configs/phytec-phycore-imx31_defconfig
delete mode 100644 arch/arm/configs/phytec-phycore-imx35_defconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a0a6ae9c75..c5645c540e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -104,6 +104,8 @@ config ARCH_IMX
select CLKDEV_LOOKUP
select WATCHDOG_IMX_RESET_SOURCE
select HAS_DEBUG_LL
+ select HAVE_PBL_MULTI_IMAGES
+ select RELOCATABLE
config ARCH_LAYERSCAPE
bool "NXP Layerscape based"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 55b3195310..861b726496 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -228,23 +228,6 @@ ifeq ($(CONFIG_ARCH_MVEBU),y)
KBUILD_IMAGE := barebox.kwb barebox.kwbuart
endif
-barebox.imximg: $(KBUILD_BINARY) FORCE
- $(call if_changed,imx_image,$(CFG_$(@F)),)
-
-boarddir = $(srctree)/arch/arm/boards
-imxcfg-$(CONFIG_MACH_FREESCALE_MX53_SMD) += $(boarddir)/freescale-mx53-smd/flash-header.imxcfg
-imxcfg-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += $(boarddir)/eukrea_cpuimx51/flash-header.imxcfg
-imxcfg-$(CONFIG_MACH_FREESCALE_MX25_3STACK) += $(boarddir)/freescale-mx25-3ds/flash-header.imxcfg
-imxcfg-$(CONFIG_MACH_FREESCALE_MX35_3STACK) += $(boarddir)/freescale-mx35-3ds/flash-header.imxcfg
-imxcfg-$(CONFIG_MACH_EUKREA_CPUIMX25) += $(boarddir)/eukrea_cpuimx25/flash-header.imxcfg
-imxcfg-$(CONFIG_MACH_EUKREA_CPUIMX35) += $(boarddir)/eukrea_cpuimx35/flash-header.imxcfg
-imxcfg-$(CONFIG_MACH_PCM043) += $(boarddir)/phytec-phycore-imx35/flash-header.imxcfg
-imxcfg-$(CONFIG_MACH_KINDLE3) += $(boarddir)/kindle3/flash-header.imxcfg
-ifneq ($(imxcfg-y),)
-CFG_barebox.imximg := $(imxcfg-y)
-KBUILD_IMAGE := barebox.imximg
-endif
-
archclean:
$(MAKE) $(clean)=$(pbl)
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 671f07c7bc..828852c596 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -41,16 +41,9 @@ obj-$(CONFIG_MACH_EFIKA_MX_SMARTBOOK) += efika-mx-smartbook/
obj-$(CONFIG_MACH_EMBEDSKY_E9) += embedsky-e9/
obj-$(CONFIG_MACH_EMBEST_MARSBOARD) += embest-marsboard/
obj-$(CONFIG_MACH_EMBEST_RIOTBOARD) += embest-riotboard/
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += eukrea_cpuimx25/
-obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27/
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += eukrea_cpuimx35/
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += eukrea_cpuimx51/
obj-$(CONFIG_MACH_ELTEC_HIPERCAM) += eltec-hipercam/
-obj-$(CONFIG_MACH_FREESCALE_MX25_3STACK) += freescale-mx25-3ds/
-obj-$(CONFIG_MACH_FREESCALE_MX35_3STACK) += freescale-mx35-3ds/
obj-y += freescale-mx51-babbage/
obj-$(CONFIG_MACH_FREESCALE_MX53_LOCO) += freescale-mx53-qsb/
-obj-$(CONFIG_MACH_FREESCALE_MX53_SMD) += freescale-mx53-smd/
obj-$(CONFIG_MACH_FREESCALE_MX53_VMX53) += freescale-mx53-vmx53/
obj-$(CONFIG_MACH_FREESCALE_MX7_SABRESD) += freescale-mx7-sabresd/
obj-$(CONFIG_MACH_MEERKAT96) += meerkat96/
@@ -59,17 +52,13 @@ obj-$(CONFIG_MACH_GK802) += gk802/
obj-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += globalscale-guruplug/
obj-$(CONFIG_MACH_GLOBALSCALE_MIRABOX) += globalscale-mirabox/
obj-$(CONFIG_MACH_GRINN_LITEBOARD) += grinn-liteboard/
-obj-$(CONFIG_MACH_GUF_CUPID) += guf-cupid/
obj-$(CONFIG_MACH_GUF_SANTARO) += guf-santaro/
obj-$(CONFIG_MACH_GUF_VINCELL) += guf-vincell/
obj-$(CONFIG_MACH_GW_VENTANA) += gateworks-ventana/
obj-$(CONFIG_MACH_HABA_KNX_LITE) += haba-knx/
-obj-$(CONFIG_MACH_IMX21ADS) += freescale-mx21-ads/
obj-$(CONFIG_MACH_IMX233_OLINUXINO) += imx233-olinuxino/
-obj-$(CONFIG_MACH_IMX27ADS) += freescale-mx27-ads/
obj-$(CONFIG_MACH_INNOCOMM_WB15) += innocomm-imx8mm-wb15/
obj-$(CONFIG_MACH_KAMSTRUP_MX7_CONCENTRATOR) += kamstrup-mx7-concentrator/
-obj-$(CONFIG_MACH_KINDLE3) += kindle3/
obj-$(CONFIG_MACH_KONTRON_SAMX6I) += kontron-samx6i/
obj-$(CONFIG_MACH_LENOVO_IX4_300D) += lenovo-ix4-300d/
obj-$(CONFIG_MACH_LUBBOCK) += lubbock/
@@ -81,7 +70,6 @@ obj-$(CONFIG_MACH_MIOA701) += mioa701/
obj-$(CONFIG_MACH_MX23EVK) += freescale-mx23-evk/
obj-$(CONFIG_MACH_MX28EVK) += freescale-mx28-evk/
obj-$(CONFIG_MACH_MYIRTECH_X335X) += myirtech-x335x/
-obj-$(CONFIG_MACH_NESO) += guf-neso/
obj-$(CONFIG_MACH_NETGEAR_RN104) += netgear-rn104/
obj-$(CONFIG_MACH_NETGEAR_RN2120) += netgear-rn2120/
obj-$(CONFIG_MACH_NOMADIK_8815NHK) += nhk8815/
@@ -99,9 +87,7 @@ obj-$(CONFIG_MACH_PANDA) += panda/
obj-$(CONFIG_MACH_PCA100) += phytec-phycard-imx27/
obj-$(CONFIG_MACH_PCAAL1) += phytec-phycard-omap3/
obj-$(CONFIG_MACH_PCAAXL2) += phytec-phycard-omap4/
-obj-$(CONFIG_MACH_PCM037) += phytec-phycore-imx31/
obj-$(CONFIG_MACH_PCM038) += phytec-phycore-imx27/
-obj-$(CONFIG_MACH_PCM043) += phytec-phycore-imx35/
obj-$(CONFIG_MACH_PCM049) += phytec-phycore-omap4460/
obj-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += phytec-som-am335x/
obj-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += phytec-som-imx6/
diff --git a/arch/arm/boards/eukrea_cpuimx25/Makefile b/arch/arm/boards/eukrea_cpuimx25/Makefile
deleted file mode 100644
index 1d2171fbdc..0000000000
--- a/arch/arm/boards/eukrea_cpuimx25/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2010 Eric Bénard <eric@eukrea.com>, Eukrea Electromatique
-
-obj-y += eukrea_cpuimx25.o
-lwl-y += lowlevel.o
-bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-eukrea_cpuimx25
diff --git a/arch/arm/boards/eukrea_cpuimx25/defaultenv-eukrea_cpuimx25/bin/init_board b/arch/arm/boards/eukrea_cpuimx25/defaultenv-eukrea_cpuimx25/bin/init_board
deleted file mode 100644
index 8f4151c357..0000000000
--- a/arch/arm/boards/eukrea_cpuimx25/defaultenv-eukrea_cpuimx25/bin/init_board
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/sh
-
-if [ -f /env/logo.bmp ]; then
- splash /env/logo.bmp
- fb0.enable=1
-elif [ -f /env/logo.bmp.lzo ]; then
- uncompress /env/logo.bmp.lzo /logo.bmp
- splash /logo.bmp
- fb0.enable=1
-fi
-
-if [ ! -z $use_dfu ]; then
- gpio_get_value 82
- if [ $? -eq 0 ]; then
- gpio_set_value 83 0
- usbserial
- timeout -s -a 2
- gpio_get_value 82
- if [ $? -eq 0 ]; then
- usbserial -d
- dfu -V 0x1234 -P 0x1234 /dev/nand0.barebox.bb(barebox)sr,/dev/nand0.kernel.bb(kernel)r,/dev/nand0.root.bb(root)r
- gpio_get_value 82
- if [ $? -eq 0 ]; then
- usbserial
- autoboot_timeout=60
- else
- reset
- fi
- else
- autoboot_timeout=28
- fi
- fi
-fi
-
-if [ -z $eth0.ethaddr ]; then
- while [ -z $eth0.ethaddr ]; do
- readline "no MAC address set for eth0. please enter the one found on your board: " eth0.ethaddr
- done
- echo -a /env/config "eth0.ethaddr=$eth0.ethaddr"
- saveenv
-fi
diff --git a/arch/arm/boards/eukrea_cpuimx25/defaultenv-eukrea_cpuimx25/config b/arch/arm/boards/eukrea_cpuimx25/defaultenv-eukrea_cpuimx25/config
deleted file mode 100644
index da19677574..0000000000
--- a/arch/arm/boards/eukrea_cpuimx25/defaultenv-eukrea_cpuimx25/config
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-
-# otg port mode : can be 'host' or 'device'
-otg_mode="device"
-# video : can be CMO-QVGA, URT-WVGA, DVI-VGA or DVI-SVGA
-video="CMO-QVGA"
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=none
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp' or 'nand'
-kernel_loc=nand
-# can be either 'net', 'nand' or 'initrd'
-rootfs_loc=nand
-
-# rootfs
-rootfs_type=ubifs
-rootfsimage=${global.hostname}/rootfs.$rootfs_type
-
-# kernel
-kernelimage=${global.hostname}/uImage-${global.hostname}.bin
-
-# barebox and it's env
-bareboximage=${global.hostname}/barebox-${global.hostname}.bin
-bareboxenvimage=${global.hostname}/bareboxenv-${global.hostname}.bin
-
-nfsroot="$eth0.serverip:/srv/nfs/${global.hostname}"
-
-autoboot_timeout=1
-
-bootargs="console=ttymxc0,115200 otg_mode=$otg_mode video=imxfb:$video"
-
-nand_parts="256k(barebox)ro,128k(bareboxenv),3M(kernel),-(root)"
-rootfs_mtdblock_nand=3
-nand_device="mxc_nand"
-ubiroot="${global.hostname}-rootfs"
-device_type="nand"
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
diff --git a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
deleted file mode 100644
index b24d85b8bc..0000000000
--- a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2009 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-// SPDX-FileCopyrightText: 2010 Eric Bénard <eric@eukrea.com>, Eukrea Electromatique
-
-#include <common.h>
-#include <init.h>
-#include <driver.h>
-#include <gpio.h>
-#include <environment.h>
-#include <mach/imx25-regs.h>
-#include <asm/armlinux.h>
-#include <asm/barebox-arm.h>
-#include <asm/sections.h>
-#include <io.h>
-#include <asm/mmu.h>
-#include <led.h>
-#include <envfs.h>
-
-#include <generated/mach-types.h>
-#include <mach/imx-nand.h>
-#include <platform_data/imxfb.h>
-#include <mach/iim.h>
-#include <platform_data/eth-fec.h>
-#include <nand.h>
-#include <mach/iomux-mx25.h>
-#include <i2c/i2c.h>
-#include <usb/fsl_usb2.h>
-#include <mach/usb.h>
-#include <mach/devices-imx25.h>
-#include <asm/barebox-arm-head.h>
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_RMII,
- .phy_addr = 0,
-};
-
-struct imx_nand_platform_data nand_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct fb_videomode imxfb_mode = {
- .name = "CMO-QVGA",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .pixclock = KHZ2PICOS(6500),
- .hsync_len = 30,
- .left_margin = 38,
- .right_margin = 20,
- .vsync_len = 3,
- .upper_margin = 15,
- .lower_margin = 4,
-};
-
-static struct imx_fb_platform_data eukrea_cpuimx25_fb_data = {
- .mode = &imxfb_mode,
- .num_modes = 1,
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x80040060,
- .pcr = 0xCAD08B80,
- .bpp = 16,
-};
-
-struct gpio_led led0 = {
- .gpio = 2 * 32 + 19,
- .active_low = 1,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = {
- MX25_PAD_FEC_MDC__FEC_MDC,
- MX25_PAD_FEC_MDIO__FEC_MDIO,
- MX25_PAD_FEC_RDATA0__FEC_RDATA0,
- MX25_PAD_FEC_RDATA1__FEC_RDATA1,
- MX25_PAD_FEC_RX_DV__FEC_RX_DV,
- MX25_PAD_FEC_TDATA0__FEC_TDATA0,
- MX25_PAD_FEC_TDATA1__FEC_TDATA1,
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX25_PAD_FEC_TX_EN__FEC_TX_EN,
- /* UART1 */
- MX25_PAD_UART1_RXD__UART1_RXD,
- MX25_PAD_UART1_TXD__UART1_TXD,
- MX25_PAD_UART1_RTS__UART1_RTS,
- MX25_PAD_UART1_CTS__UART1_CTS,
- /* LCDC */
- MX25_PAD_LD0__LD0,
- MX25_PAD_LD1__LD1,
- MX25_PAD_LD2__LD2,
- MX25_PAD_LD3__LD3,
- MX25_PAD_LD4__LD4,
- MX25_PAD_LD5__LD5,
- MX25_PAD_LD6__LD6,
- MX25_PAD_LD7__LD7,
- MX25_PAD_LD8__LD8,
- MX25_PAD_LD9__LD9,
- MX25_PAD_LD10__LD10,
- MX25_PAD_LD11__LD11,
- MX25_PAD_LD12__LD12,
- MX25_PAD_LD13__LD13,
- MX25_PAD_LD14__LD14,
- MX25_PAD_LD15__LD15,
- MX25_PAD_GPIO_E__LD16,
- MX25_PAD_GPIO_F__LD17,
- MX25_PAD_LSCLK__LSCLK,
- MX25_PAD_OE_ACD__OE_ACD,
- MX25_PAD_VSYNC__VSYNC,
- MX25_PAD_HSYNC__HSYNC,
- /* BACKLIGHT CONTROL */
- MX25_PAD_PWM__GPIO_1_26,
- /* I2C */
- MX25_PAD_I2C1_CLK__I2C1_CLK,
- MX25_PAD_I2C1_DAT__I2C1_DAT,
- /* SDCard */
- MX25_PAD_SD1_CLK__SD1_CLK,
- MX25_PAD_SD1_CMD__SD1_CMD,
- MX25_PAD_SD1_DATA0__SD1_DATA0,
- MX25_PAD_SD1_DATA1__SD1_DATA1,
- MX25_PAD_SD1_DATA2__SD1_DATA2,
- MX25_PAD_SD1_DATA3__SD1_DATA3,
- /* LED */
- MX25_PAD_POWER_FAIL__GPIO_3_19,
- /* SWITCH */
- MX25_PAD_VSTBY_ACK__GPIO_3_18,
-};
-
-#ifdef CONFIG_USB
-#ifndef CONFIG_USB_GADGET
-struct imxusb_platformdata otg_pdata = {
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
- .mode = USB_DR_MODE_HOST,
- .phymode = USBPHY_INTERFACE_MODE_UTMI,
-};
-#endif
-
-struct imxusb_platformdata hs_pdata = {
- .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN,
- .mode = USB_DR_MODE_HOST,
-};
-#endif
-
-#ifdef CONFIG_USB_GADGET
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
-};
-#endif
-
-static int eukrea_cpuimx25_devices_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
- ARRAY_SIZE(eukrea_cpuimx25_pads));
-
- led_gpio_register(&led0);
-
- imx25_iim_register_fec_ethaddr();
- imx25_add_fec(&fec_info);
-
- nand_info.width = 1;
- imx25_add_nand(&nand_info);
-
- devfs_add_partition("nand0", 0x00000, 0x40000,
- DEVFS_PARTITION_FIXED, "self_raw");
- dev_add_bb_dev("self_raw", "self0");
-
- devfs_add_partition("nand0", 0x40000, 0x20000,
- DEVFS_PARTITION_FIXED, "env_raw");
- dev_add_bb_dev("env_raw", "env0");
-
- /* enable LCD */
- gpio_direction_output(26, 1);
- gpio_set_value(26, 1);
-
- /* LED : default OFF */
- gpio_direction_output(2 * 32 + 19, 1);
-
- /* Switch : input */
- gpio_direction_input(2 * 32 + 18);
-
- imx25_add_fb(&eukrea_cpuimx25_fb_data);
-
-#ifdef CONFIG_USB_GADGET
- /* Workaround ENGcm09152 */
- writel(readl(MX25_USB_OTG_BASE_ADDR + 0x608) | (1 << 23), MX25_USB_OTG_BASE_ADDR + 0x608);
- add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, MX25_USB_OTG_BASE_ADDR, 0x200,
- IORESOURCE_MEM, &usb_pdata);
-#endif
-
-#ifdef CONFIG_USB
-#ifndef CONFIG_USB_GADGET
- imx_add_usb((void *)MX25_USB_OTG_BASE_ADDR, 0, &otg_pdata);
-#endif
- imx_add_usb((void *)MX25_USB_HS_BASE_ADDR, 1, &hs_pdata);
-#endif
-
- imx25_add_mmc0(NULL);
- imx25_add_i2c0(NULL);
-
- armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX25SD);
-
- if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
- defaultenv_append_directory(defaultenv_eukrea_cpuimx25);
-
- return 0;
-}
-
-device_initcall(eukrea_cpuimx25_devices_init);
-
-static int eukrea_cpuimx25_console_init(void)
-{
- barebox_set_model("Eukrea CPUIMX25");
- barebox_set_hostname("eukrea-cpuimx25");
-
- imx25_add_uart0();
- return 0;
-}
-
-console_initcall(eukrea_cpuimx25_console_init);
diff --git a/arch/arm/boards/eukrea_cpuimx25/flash-header.imxcfg b/arch/arm/boards/eukrea_cpuimx25/flash-header.imxcfg
deleted file mode 100644
index 00417ddded..0000000000
--- a/arch/arm/boards/eukrea_cpuimx25/flash-header.imxcfg
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-soc imx25
-loadaddr 0x80000000
-ivtofs 0x400
-
-wm 32 0xb8001008 0x00000000
-wm 32 0xb8001010 0x00000004
-wm 32 0xb8001000 0x92100000
-wm 8 0x80000400 0x12344321
-wm 32 0xb8001000 0xa2100000
-wm 32 0x80000000 0x12344321
-wm 32 0x80000000 0x12344321
-wm 32 0xb8001000 0xb2100000
-wm 8 0x80000033 0xda
-wm 8 0x81000000 0xff
-wm 32 0xb8001000 0x82216080
-wm 32 0xb8001004 0x00295729
-wm 32 0x53f80008 0x20034000
diff --git a/arch/arm/boards/eukrea_cpuimx25/lowlevel.c b/arch/arm/boards/eukrea_cpuimx25/lowlevel.c
deleted file mode 100644
index 93cd64d90f..0000000000
--- a/arch/arm/boards/eukrea_cpuimx25/lowlevel.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-// SPDX-FileCopyrightText: 2010 Eric Bénard <eric@eukrea.com>, Eukrea Electromatique
-
-#include <common.h>
-#include <init.h>
-#include <mach/imx25-regs.h>
-#include <mach/imx-pll.h>
-#include <mach/esdctl.h>
-#include <io.h>
-#include <mach/imx-nand.h>
-#include <asm/barebox-arm.h>
-#include <asm/barebox-arm-head.h>
-#include <asm/sections.h>
-#include <asm-generic/memory_layout.h>
-#include <asm/system.h>
-
-void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- uint32_t r;
- register uint32_t loops = 0x20000;
-
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(MX25_IRAM_BASE_ADDR + MX25_IRAM_SIZE);
-
- /* restart the MPLL and wait until it's stable */
- writel(readl(MX25_CCM_BASE_ADDR + MX25_CCM_CCTL) | (1 << 27),
- MX25_CCM_BASE_ADDR + MX25_CCM_CCTL);
- while (readl(MX25_CCM_BASE_ADDR + MX25_CCM_CCTL) & (1 << 27)) {};
-
- /* Configure dividers and ARM clock source
- * ARM @ 400 MHz
- * AHB @ 133 MHz
- */
- writel(0x20034000, MX25_CCM_BASE_ADDR + MX25_CCM_CCTL);
-
- /* Enable UART1 / FEC / */
-/* writel(0x1FFFFFFF, MX25_CCM_BASE_ADDR + CCM_CGCR0);
- writel(0xFFFFFFFF, MX25_CCM_BASE_ADDR + CCM_CGCR1);
- writel(0x000FDFFF, MX25_CCM_BASE_ADDR + CCM_CGCR2);*/
-
- /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.
- * Set all MPROTx to be non-bufferable, trusted for R/W,
- * not forced to user-mode.
- */
- writel(0x77777777, 0x43f00000);
- writel(0x77777777, 0x43f00004);
- writel(0x77777777, 0x53f00000);
- writel(0x77777777, 0x53f00004);
-
- /* MAX (Multi-Layer AHB Crossbar Switch) setup
- * MPR - priority for MX25 is (SDHC2/SDMA)>USBOTG>RTIC>IAHB>DAHB
- */
- writel(0x00002143, 0x43f04000);
- writel(0x00002143, 0x43f04100);
- writel(0x00002143, 0x43f04200);
- writel(0x00002143, 0x43f04300);
- writel(0x00002143, 0x43f04400);
- /* SGPCR - always park on last master */
- writel(0x10, 0x43f04010);
- writel(0x10, 0x43f04110);
- writel(0x10, 0x43f04210);
- writel(0x10, 0x43f04310);
- writel(0x10, 0x43f04410);
- /* MGPCR - restore default values */
- writel(0x0, 0x43f04800);
- writel(0x0, 0x43f04900);
- writel(0x0, 0x43f04a00);
- writel(0x0, 0x43f04b00);
- writel(0x0, 0x43f04c00);
-
- /* Configure M3IF registers
- * M3IF Control Register (M3IFCTL) for MX25
- * MRRP[0] = LCDC on priority list (1 << 0) = 0x00000001
- * MRRP[1] = MAX1 not on priority list (0 << 1) = 0x00000000
- * MRRP[2] = MAX0 not on priority list (0 << 2) = 0x00000000
- * MRRP[3] = USB HOST not on priority list (0 << 3) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 4) = 0x00000000
- * MRRP[5] = SD/ATA/FEC not on priority list (0 << 5) = 0x00000000
- * MRRP[6] = SCMFBC not on priority list (0 << 6) = 0x00000000
- * MRRP[7] = CSI not on priority list (0 << 7) = 0x00000000
- * ----------
- * 0x00000001
- */
- writel(0x1, 0xb8003000);
-
- /* Speed up NAND controller by adjusting the NFC divider */
- r = readl(MX25_CCM_BASE_ADDR + MX25_CCM_PCDR2);
- r &= ~0xf;
- r |= 0x1;
- writel(r, MX25_CCM_BASE_ADDR + MX25_CCM_PCDR2);
-
- /* Skip SDRAM initialization if we run from RAM */
- r = get_pc();
- if (r > 0x80000000 && r < 0x90000000)
- goto out;
-
- /* Init Mobile DDR */
- writel(0x0000000E, MX25_ESDCTL_BASE_ADDR + IMX_ESDMISC);
- writel(0x00000004, MX25_ESDCTL_BASE_ADDR + IMX_ESDMISC);
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-
- writel(0x0029572B, MX25_ESDCTL_BASE_ADDR + IMX_ESDCFG0);
- writel(0x92210000, MX25_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(0xda, MX25_CSD0_BASE_ADDR + 0x400);
- writel(0xA2210000, MX25_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(0xda, MX25_CSD0_BASE_ADDR);
- writeb(0xda, MX25_CSD0_BASE_ADDR);
- writel(0xB2210000, MX25_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(0xda, MX25_CSD0_BASE_ADDR + 0x33);
- writeb(0xda, MX25_CSD0_BASE_ADDR + 0x1000000);
- writel(0x82216080, MX25_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
-
- if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND))
- imx25_barebox_boot_nand_external();
-
-out:
- imx25_barebox_entry(NULL);
-}
diff --git a/arch/arm/boards/eukrea_cpuimx27/Makefile b/arch/arm/boards/eukrea_cpuimx27/Makefile
deleted file mode 100644
index 6b6de4e87d..0000000000
--- a/arch/arm/boards/eukrea_cpuimx27/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-lwl-y += lowlevel_init.o
-obj-y += eukrea_cpuimx27.o
diff --git a/arch/arm/boards/eukrea_cpuimx27/env/bin/_update b/arch/arm/boards/eukrea_cpuimx27/env/bin/_update
deleted file mode 100644
index 014bce3512..0000000000
--- a/arch/arm/boards/eukrea_cpuimx27/env/bin/_update
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-
-if [ -z "$part" -o -z "$image" ]; then
- echo "define \$part and \$image"
- exit 1
-fi
-
-if [ ! -e "$part" ]; then
- echo "Partition $part does not exist"
- exit 1
-fi
-
-if [ $# = 1 ]; then
- image=$1
-fi
-
-if [ x$ip = xdhcp ]; then
- dhcp
-fi
-
-ping $eth0.serverip
-if [ $? -ne 0 ] ; then
- echo "update aborted"
- exit 1
-fi
-
-unprotect $part
-
-echo
-echo "erasing partition $part"
-erase $part
-
-echo
-echo "flashing $image to $part"
-echo
-tftp $image $part
diff --git a/arch/arm/boards/eukrea_cpuimx27/env/bin/boot b/arch/arm/boards/eukrea_cpuimx27/env/bin/boot
deleted file mode 100644
index 0e1c80a932..0000000000
--- a/arch/arm/boards/eukrea_cpuimx27/env/bin/boot
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-if [ x$1 = xnand ]; then
- root=nand
- kernel=nand
-fi
-
-if [ x$1 = xnet ]; then
- root=net
- kernel=net
-fi
-
-if [ x$1 = xnor ]; then
- root=nor
- kernel=nor
-fi
-
-if [ x$root = xnet ]; then
- if [ x$ip = xdhcp ]; then
- bootargs="$bootargs ip=dhcp"
- else
- bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask:::"
- fi
-else
- bootargs="$bootargs ip=off"
-fi
-
-if [ x$rootfstype = xubifs ]; then
- bootargs="$bootargs root=ubi0:$ubiroot ubi.mtd=$rootpartnum rootfstype=ubifs"
-else
- if [ x$root = xnand ]; then
- bootargs="$bootargs root=$rootpart_nand rootfstype=jffs2"
- elif [ x$root = xnor ]; then
- bootargs="$bootargs root=$rootpart_nor rootfstype=jffs2"
- fi
-fi
-
-bootargs="$bootargs mtdparts=physmap-flash.0:$nor_parts;mxc_nand:$nand_parts"
-
-if [ $kernel = net ]; then
- if [ x$ip = xdhcp ]; then
- dhcp
- fi
- tftp $uimage uImage || exit 1
- bootm uImage
-elif [ $kernel = nor ]; then
- bootm /dev/nor0.kernel
-else
- bootm /dev/nand0.kernel.bb
-fi
-
diff --git a/arch/arm/boards/eukrea_cpuimx27/env/bin/init b/arch/arm/boards/eukrea_cpuimx27/env/bin/init
deleted file mode 100644
index e3c109135a..0000000000
--- a/arch/arm/boards/eukrea_cpuimx27/env/bin/init
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-
-PATH=/env/bin
-export PATH
-
-. /env/config
-if [ -e /dev/nor0 ]; then
- addpart /dev/nor0 $nor_parts
-fi
-
-if [ -e /dev/nand0 ]; then
- addpart /dev/nand0 $nand_parts
-fi
-
-if [ -f /env/logo.bmp ]; then
- splash /env/logo.bmp
- fb0.enable=1
-elif [ -f /env/logo.bmp.lzo ]; then
- uncompress /env/logo.bmp.lzo /logo.bmp
- splash /logo.bmp
- fb0.enable=1
-fi
-
-if [ -z $eth0.ethaddr ]; then
- while [ -z $eth0.ethaddr ]; do
- readline "no MAC address set for eth0. please enter the one found on your board: " eth0.ethaddr
- done
- echo -a /env/config "eth0.ethaddr=$eth0.ethaddr"
- saveenv
-fi
-
-echo
-echo -n "Hit any key to stop autoboot: "
-timeout -a $autoboot_timeout
-if [ $? != 0 ]; then
- echo
- echo "type update_kernel nand|nor [<imagename>] to update kernel into flash"
- echo "type update_root nand|nor [<imagename>] to update rootfs into flash"
- echo
- exit
-fi
-
-boot
diff --git a/arch/arm/boards/eukrea_cpuimx27/env/bin/update_kernel b/arch/arm/boards/eukrea_cpuimx27/env/bin/update_kernel
deleted file mode 100644
index 05c822d860..0000000000
--- a/arch/arm/boards/eukrea_cpuimx27/env/bin/update_kernel
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-image=$uimage
-if [ x$1 = xnand ]; then
- part=/dev/nand0.kernel.bb
-elif [ x$1 = xnor ]; then
- part=/dev/nor0.kernel
-else
- echo "usage: $0 nor|nand [imagename]"
- exit 1
-fi
-
-. /env/bin/_update $2
diff --git a/arch/arm/boards/eukrea_cpuimx27/env/bin/update_root b/arch/arm/boards/eukrea_cpuimx27/env/bin/update_root
deleted file mode 100644
index eaf36ebcea..0000000000
--- a/arch/arm/boards/eukrea_cpuimx27/env/bin/update_root
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-image=$uimage
-if [ x$1 = xnand ]; then
- part=/dev/nand0.root.bb
-elif [ x$1 = xnor ]; then
- part=/dev/nor0.root
-else
- echo "usage: $0 nor|nand [imagename]"
- exit 1
-fi
-
-. /env/bin/_update $2
-
diff --git a/arch/arm/boards/eukrea_cpuimx27/env/config b/arch/arm/boards/eukrea_cpuimx27/env/config
deleted file mode 100644
index 7f5600339f..0000000000
--- a/arch/arm/boards/eukrea_cpuimx27/env/config
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-
-# can be either 'net', 'nor' or 'nand''
-kernel=nor
-root=nor
-rootfstype=ubifs
-
-basedir=cpuimx27
-uimage=$basedir/uImage
-rootfs=$basedir/rootfs
-
-autoboot_timeout=1
-
-# DVI-SVGA DVI-VGA CMO-QVGA
-video="CMO-QVGA"
-bootargs="console=ttymxc0,115200 fec_mac=$eth0.ethaddr video=mxcfb:$video"
-
-nor_parts="256k(barebox)ro,128k(bareboxenv),2432k(kernel),-(root)"
-rootpart_nor="/dev/mtdblock3"
-
-nand_parts="-(nand)"
-rootpart_nand=""
-
-rootpartnum=3
-ubiroot="eukrea-cpuimx27-rootfs"
-
-nfsroot=""
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-ip=dhcp
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
diff --git a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
deleted file mode 100644
index bb5ef52793..0000000000
--- a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
+++ /dev/null
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-/*
- * Copyright (C) 2009 Eric Benard, Eukrea Electromatique
- * Based on pcm038.c which is :
- * Copyright (C) 2007 Sascha Hauer, Pengutronix
- */
-
-#include <common.h>
-#include <errno.h>
-#include <net.h>
-#include <init.h>
-#include <environment.h>
-#include <mach/imx27-regs.h>
-#include <notifier.h>
-#include <gpio.h>
-#include <asm/armlinux.h>
-#include <asm/sections.h>
-#include <asm/barebox-arm.h>
-#include <generated/mach-types.h>
-#include <fs.h>
-#include <fcntl.h>
-#include <nand.h>
-#include <command.h>
-#include <io.h>
-#include <mach/imx-nand.h>
-#include <mach/imx-pll.h>
-#include <mach/weim.h>
-#include <platform_data/imxfb.h>
-#include <platform_data/serial-ns16550.h>
-#include <asm/mmu.h>
-#include <i2c/i2c.h>
-#include <mfd/lp3972.h>
-#include <mach/iomux-mx27.h>
-#include <mach/devices-imx27.h>
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_MII,
- .phy_addr = 1,
-};
-
-struct imx_nand_platform_data nand_info = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-#ifdef CONFIG_DRIVER_SERIAL_NS16550
-static struct NS16550_plat quad_uart_serial_plat = {
- .clock = 14745600,
- .shift = 1,
-};
-
-#ifdef CONFIG_EUKREA_CPUIMX27_QUART1
-#define QUART_OFFSET 0x200000
-#elif defined CONFIG_EUKREA_CPUIMX27_QUART2
-#define QUART_OFFSET 0x400000
-#elif defined CONFIG_EUKREA_CPUIMX27_QUART3
-#define QUART_OFFSET 0x800000
-#elif defined CONFIG_EUKREA_CPUIMX27_QUART4
-#define QUART_OFFSET 0x1000000
-#endif
-#endif
-
-static struct i2c_board_info i2c_devices[] = {
- {
- I2C_BOARD_INFO("lp3972", 0x34),
- },
-};
-
-#ifdef CONFIG_DRIVER_VIDEO_IMX
-static struct fb_videomode imxfb_mode = {
- .name = "CMO-QVGA",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .pixclock = 156000,
- .hsync_len = 30,
- .left_margin = 38,
- .right_margin = 20,
- .vsync_len = 3,
- .upper_margin = 15,
- .lower_margin = 4,
-};
-
-static struct imx_fb_platform_data eukrea_cpuimx27_fb_data = {
- .mode = &imxfb_mode,
- .num_modes = 1,
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
- .pcr = 0xFAD08B80,
- .bpp = 16,
-};
-#endif
-
-static int eukrea_cpuimx27_devices_init(void)
-{
- char *envdev = "no";
- int i;
-
- unsigned int mode[] = {
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC | GPIO_PUEN,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
-#ifdef CONFIG_DRIVER_SERIAL_IMX
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
-#endif
-#ifdef CONFIG_DRIVER_VIDEO_IMX
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA31_PF_OE_ACD,
- GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT,
- GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT,
-#endif
- };
-
- /* configure 16 bit nor flash on cs0 */
- imx27_setup_weimcs(0, 0x00008F03, 0xA0330D01, 0x002208C0);
-
- /* initialize gpios */
- for (i = 0; i < ARRAY_SIZE(mode); i++)
- imx27_gpio_mode(mode[i]);
-
- add_cfi_flash_device(DEVICE_ID_DYNAMIC, 0xC0000000, 32 * 1024 * 1024, 0);
-#ifdef CONFIG_EUKREA_CPUIMX27_NOR_64MB
- add_cfi_flash_device(DEVICE_ID_DYNAMIC, 0xC2000000, 32 * 1024 * 1024, 0);
-#endif
- imx27_add_nand(&nand_info);
-
- i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- imx27_add_i2c0(NULL);
-
- devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self0");
- devfs_add_partition("nor0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0");
- protect_file("/dev/env0", 1);
- envdev = "NOR";
-
- printf("Using environment in %s Flash\n", envdev);
-
-#ifdef CONFIG_DRIVER_VIDEO_IMX
- imx_add_fb((void *)0x10021000, &eukrea_cpuimx27_fb_data);
- gpio_direction_output(GPIO_PORTE | 5, 0);
- gpio_set_value(GPIO_PORTE | 5, 1);
- gpio_direction_output(GPIO_PORTA | 25, 0);
- gpio_set_value(GPIO_PORTA | 25, 1);
-#endif
-
- armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX27);
-
- return 0;
-}
-
-device_initcall(eukrea_cpuimx27_devices_init);
-
-static int eukrea_cpuimx27_console_init(void)
-{
- uint32_t val;
-
- barebox_set_model("Eukrea CPUIMX27");
- barebox_set_hostname("eukrea-cpuimx27");
-
-#ifdef CONFIG_DRIVER_SERIAL_IMX
- imx27_add_uart0();
-#endif
- /* configure 8 bit UART on cs3 */
- val = readl(MX27_SYSCTRL_BASE_ADDR + MX27_FMCR);
- val &= ~0x2;
- writel(val, MX27_SYSCTRL_BASE_ADDR + MX27_FMCR);
-
- imx27_setup_weimcs(3, 0x0000D603, 0x0D1D0D01, 0x00D20000);
-#ifdef CONFIG_DRIVER_SERIAL_NS16550
- add_ns16550_device(DEVICE_ID_DYNAMIC, MX27_CS3_BASE_ADDR + QUART_OFFSET, 0xf,
- IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
- &quad_uart_serial_plat);
-#endif
- return 0;
-}
-
-console_initcall(eukrea_cpuimx27_console_init);
-
-static int eukrea_cpuimx27_late_init(void)
-{
-#ifdef CONFIG_MFD_LP3972
- struct i2c_client *client;
- u8 reg[1];
-#endif
- console_flush();
- imx27_add_fec(&fec_info);
-
-#ifdef CONFIG_MFD_LP3972
- client = lp3972_get_client();
- if (!client)
- return -ENODEV;
- reg[0] = 0xa0;
- i2c_write_reg(client, 0x39, reg, sizeof(reg));
-#endif
- return 0;
-}
-
-late_initcall(eukrea_cpuimx27_late_init);
diff --git a/arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S b/arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S
deleted file mode 100644
index 13e906eea4..0000000000
--- a/arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S
+++ /dev/null
@@ -1,136 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <config.h>
-#include <asm-generic/memory_layout.h>
-#include <mach/imx27-regs.h>
-#include <mach/esdctl.h>
-#include <asm/barebox-arm-head.h>
-
-#define writel(val, reg) \
- ldr r0, =reg; \
- ldr r1, =val; \
- str r1, [r0];
-
-#if defined CONFIG_EUKREA_CPUIMX27_SDRAM_256MB
-#define ROWS0 ESDCTL0_ROW14
-#define CFG0 0x0029572D
-#elif defined CONFIG_EUKREA_CPUIMX27_SDRAM_128MB
-#define ROWS0 ESDCTL0_ROW13
-#define CFG0 0x00095728
-#endif
-
-#define ESDCTL0_VAL (ESDCTL0_SDE | ROWS0 | ESDCTL0_COL10)
-
-.macro sdram_init
- /*
- * DDR on CSD0
- */
- /* Enable DDR SDRAM operation */
- writel(0x0000000C, MX27_ESDCTL_BASE_ADDR + IMX_ESDMISC)
-
- /* Set the driving strength */
- writel(0x55555555, MX27_SYSCTRL_BASE_ADDR + MX27_DSCR(3))
- writel(0x55555555, MX27_SYSCTRL_BASE_ADDR + MX27_DSCR(5))
- writel(0x55555555, MX27_SYSCTRL_BASE_ADDR + MX27_DSCR(6))
- writel(0x00005005, MX27_SYSCTRL_BASE_ADDR + MX27_DSCR(7))
- writel(0x15555555, MX27_SYSCTRL_BASE_ADDR + MX27_DSCR(8))
-
- /* Initial reset */
- writel(0x00000004, MX27_ESDCTL_BASE_ADDR + IMX_ESDMISC)
- writel(CFG0, MX27_ESDCTL_BASE_ADDR + IMX_ESDCFG0)
-
- /* precharge CSD0 all banks */
- writel(ESDCTL0_VAL | ESDCTL0_SMODE_PRECHARGE,
- MX27_ESDCTL_BASE_ADDR + IMX_ESDCTL0)
- writel(0x00000000, 0xA0000F00) /* CSD0 precharge address (A10 = 1) */
- writel(ESDCTL0_VAL | ESDCTL0_SMODE_AUTO_REFRESH,
- MX27_ESDCTL_BASE_ADDR + IMX_ESDCTL0)
-
- ldr r0, =0xa0000f00
- mov r1, #0
- mov r2, #8
-1:
- str r1, [r0]
- subs r2, #1
- bne 1b
-
- writel(ESDCTL0_VAL | ESDCTL0_SMODE_LOAD_MODE,
- MX27_ESDCTL_BASE_ADDR + IMX_ESDCTL0)
- ldr r0, =0xA0000033
- mov r1, #0xda
- strb r1, [r0]
-#if defined CONFIG_EUKREA_CPUIMX27_SDRAM_256MB
- ldr r0, =0xA2000000
-#elif defined CONFIG_EUKREA_CPUIMX27_SDRAM_128MB
- ldr r0, =0xA1000000
-#endif
- mov r1, #0xff
- strb r1, [r0]
- writel(ESDCTL0_VAL | ESDCTL0_DSIZ_31_0 | ESDCTL0_REF4 |
- ESDCTL0_BL | ESDCTL0_SMODE_NORMAL,
- MX27_ESDCTL_BASE_ADDR + IMX_ESDCTL0)
-.endm
-
- .section ".text_bare_init","ax"
-
-.globl barebox_arm_reset_vector
-barebox_arm_reset_vector:
-
- bl arm_cpu_lowlevel_init
-
- ldr sp, =MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE - 4;
-
- /* ahb lite ip interface */
- writel(0x20040304, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR0)
- writel(0xDFFBFCFB, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR1)
- writel(0x00000000, MX27_AIPI_BASE_ADDR + MX27_AIPI2_PSR0)
- writel(0xFFFFFFFF, MX27_AIPI_BASE_ADDR + MX27_AIPI2_PSR1)
-
- /* disable mpll/spll */
- ldr r0, =MX27_CCM_BASE_ADDR + MX27_CSCR
- ldr r1, [r0]
- bic r1, r1, #0x03
- str r1, [r0]
-
- /*
- * pll clock initialization - see section 3.4.3 of the i.MX27 manual
- */
- /* MPLL = 399 MHz */
- writel(0x00331C23, MX27_CCM_BASE_ADDR + MX27_MPCTL0)
- /* SPLL = 240 MHz */
- writel(0x040C2403, MX27_CCM_BASE_ADDR + MX27_SPCTL0)
- writel(0x33F38107 | MX27_CSCR_MPLL_RESTART | MX27_CSCR_SPLL_RESTART,
- MX27_CCM_BASE_ADDR + MX27_CSCR)
-
- /* add some delay here */
- mov r1, #0x1000
-1: subs r1, r1, #0x1
- bne 1b
-
- /* clock gating enable */
- writel(0x00050f08, MX27_SYSCTRL_BASE_ADDR + MX27_GPCR)
-
- /* peripheral clock divider */
- /* FIXME */
- writel(0x130400c3, MX27_CCM_BASE_ADDR + MX27_PCDR0)
- /* PERDIV1=08 @133 MHz */
- writel(0x09030208, MX27_CCM_BASE_ADDR + MX27_PCDR1)
- /* PERDIV1=04 @266 MHz */
-
- /* skip sdram initialization if we run from ram */
- cmp pc, #0xa0000000
- bls 1f
- cmp pc, #0xc0000000
- bhi 1f
-
- b imx27_barebox_entry
-1:
- sdram_init
-
-#ifdef CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND
- mov r0, #0
- b imx27_barebox_boot_nand_external
-#endif /* CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND */
-
-ret:
- b imx27_barebox_entry
diff --git a/arch/arm/boards/eukrea_cpuimx35/Makefile b/arch/arm/boards/eukrea_cpuimx35/Makefile
deleted file mode 100644
index f1a8e7a5d6..0000000000
--- a/arch/arm/boards/eukrea_cpuimx35/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Juergen Beisert <jbe@pengutronix.de>
-
-obj-y += eukrea_cpuimx35.o
-lwl-y += lowlevel.o
-bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-eukrea_cpuimx35
diff --git a/arch/arm/boards/eukrea_cpuimx35/defaultenv-eukrea_cpuimx35/bin/init_board b/arch/arm/boards/eukrea_cpuimx35/defaultenv-eukrea_cpuimx35/bin/init_board
deleted file mode 100644
index 2a07a8425a..0000000000
--- a/arch/arm/boards/eukrea_cpuimx35/defaultenv-eukrea_cpuimx35/bin/init_board
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/sh
-
-if [ -f /env/logo.bmp ]; then
- splash /env/logo.bmp
- fb0.enable=1
- gpio_set_value 1 1
-elif [ -f /env/logo.bmp.lzo ]; then
- uncompress /env/logo.bmp.lzo /logo.bmp
- splash /logo.bmp
- fb0.enable=1
- gpio_set_value 1 1
-fi
-
-gpio_get_value 89
-if [ $? -eq 0 ]; then
- gpio_set_value 93 0
- usbserial
- timeout -s -a 2
- gpio_get_value 89
- if [ $? -eq 0 ]; then
- usbserial -d
- dfu -V 0x1234 -P 0x1234 /dev/nand0.barebox.bb(barebox)sr,/dev/nand0.kernel.bb(kernel)r,/dev/nand0.root.bb(root)r
- gpio_get_value 89
- if [ $? -eq 0 ]; then
- usbserial
- autoboot_timeout=60
- else
- reset
- fi
- else
- autoboot_timeout=28
- fi
-fi
-
-if [ -z $eth0.ethaddr ]; then
- while [ -z $eth0.ethaddr ]; do
- readline "no MAC address set for eth0. please enter the one found on your board: " eth0.ethaddr
- done
- echo -a /env/config "eth0.ethaddr=$eth0.ethaddr"
- saveenv
-fi
diff --git a/arch/arm/boards/eukrea_cpuimx35/defaultenv-eukrea_cpuimx35/config b/arch/arm/boards/eukrea_cpuimx35/defaultenv-eukrea_cpuimx35/config
deleted file mode 100644
index 05c4391d35..0000000000
--- a/arch/arm/boards/eukrea_cpuimx35/defaultenv-eukrea_cpuimx35/config
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-
-# otg port mode : can be 'host' or 'device'
-otg_mode="device"
-# video : can be CMO-QVGA, URT-WVGA, DVI-VGA or DVI-SVGA
-video="CMO-QVGA"
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=none
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp' or 'nand'
-kernel_loc=nand
-# can be either 'net', 'nand' or 'initrd'
-rootfs_loc=nand
-
-# rootfs
-rootfs_type=ubifs
-rootfsimage=${global.hostname}/rootfs.$rootfs_type
-
-# kernel
-kernelimage=${global.hostname}/uImage-${global.hostname}.bin
-
-# barebox and it's env
-bareboximage=${global.hostname}/barebox-${global.hostname}.bin
-bareboxenvimage=${global.hostname}/bareboxenv-${global.hostname}.bin
-
-nfsroot="$eth0.serverip:/srv/nfs/${global.hostname}"
-
-autoboot_timeout=1
-
-bootargs="console=ttymxc0,115200 otg_mode=$otg_mode video=mx3fb:$video"
-
-nand_parts="256k(barebox)ro,128k(bareboxenv),3M(kernel),-(root)"
-rootfs_mtdblock_nand=3
-nand_device="mxc_nand"
-ubiroot="${global.hostname}-rootfs"
-device_type="nand"
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
diff --git a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
deleted file mode 100644
index 2506ae8b06..0000000000
--- a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
+++ /dev/null
@@ -1,346 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-/*
- * Copyright (C) 2007 Sascha Hauer, Pengutronix
- * 2009 Marc Kleine-Budde, Pengutronix
- * (c) 2010 Eukrea Electromatique, Eric Bénard <eric@eukrea.com>
- *
- * Derived from:
- *
- * * mx35_3stack.c - board file for uboot-v1
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <environment.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <platform_data/eth-fec.h>
-#include <fs.h>
-#include <init.h>
-#include <nand.h>
-#include <net.h>
-#include <gpio.h>
-#include <envfs.h>
-
-#include <asm/armlinux.h>
-#include <io.h>
-#include <generated/mach-types.h>
-#include <asm/mmu.h>
-
-#include <mach/imx-nand.h>
-#include <mach/imx35-regs.h>
-#include <mach/iomux-mx35.h>
-#include <mach/iomux-v3.h>
-#include <mach/imx-ipu-fb.h>
-#include <mach/imx-pll.h>
-#include <i2c/i2c.h>
-#include <usb/fsl_usb2.h>
-#include <mach/usb.h>
-#include <mach/devices-imx35.h>
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_MII,
- .phy_addr = 0,
-};
-
-struct imx_nand_platform_data nand_info = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static struct fb_videomode imxfb_mode = {
- .name = "CMO_QVGA",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .pixclock = KHZ2PICOS(7000),
- .left_margin = 68,
- .right_margin = 20,
- .upper_margin = 15,
- .lower_margin = 4,
- .hsync_len = 30,
- .vsync_len = 3,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
-};
-
-static void eukrea_cpuimx35_enable_display(int enable)
-{
- gpio_direction_output(4, enable);
-}
-
-static struct imx_ipu_fb_platform_data ipu_fb_data = {
- .mode = &imxfb_mode,
- .num_modes = 1,
- .bpp = 16,
- .enable = eukrea_cpuimx35_enable_display,
-};
-
-#ifdef CONFIG_USB
-#ifndef CONFIG_USB_GADGET
-struct imxusb_platformdata otg_pdata = {
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
- .mode = USB_DR_MODE_HOST,
- .phymode = USBPHY_INTERFACE_MODE_UTMI,
-};
-#endif
-
-struct imxusb_platformdata hs_pdata = {
- .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN,
- .mode = USB_DR_MODE_HOST,
-};
-#endif
-
-#ifdef CONFIG_USB_GADGET
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
-};
-#endif
-
-static int eukrea_cpuimx35_mmu_init(void)
-{
- l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
-
- return 0;
-}
-postmmu_initcall(eukrea_cpuimx35_mmu_init);
-
-static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-
- MX35_PAD_RXD1__UART1_RXD_MUX,
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RTS1__UART1_RTS,
- MX35_PAD_CTS1__UART1_CTS,
-
- MX35_PAD_LD23__GPIO3_29,
- MX35_PAD_CONTRAST__GPIO1_1,
- MX35_PAD_D3_CLS__GPIO1_4,
-
- MX35_PAD_I2C1_CLK__I2C1_SCL,
- MX35_PAD_I2C1_DAT__I2C1_SDA,
-
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-
- MX35_PAD_LD19__GPIO3_25,
-};
-
-static int eukrea_cpuimx35_devices_init(void)
-{
-#ifdef CONFIG_USB_GADGET
- unsigned int tmp;
-#endif
- mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
- ARRAY_SIZE(eukrea_cpuimx35_pads));
-
- imx35_add_nand(&nand_info);
-
- devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
- dev_add_bb_dev("self_raw", "self0");
- devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
- dev_add_bb_dev("env_raw", "env0");
-
- imx35_add_fec(&fec_info);
- imx35_add_fb(&ipu_fb_data);
-
- imx35_add_i2c0(NULL);
- imx35_add_mmc0(NULL);
-
- /* led default off */
- gpio_direction_output(32 * 2 + 29, 1);
-
- /* Switch : input */
- gpio_direction_input(32 * 2 + 25);
-
- /* screen default on to prevent flicker */
- gpio_direction_output(4, 0);
- /* backlight default off */
- gpio_direction_output(1, 0);
-
-#ifdef CONFIG_USB
-#ifndef CONFIG_USB_GADGET
- imx_add_usb((void *)MX35_USB_OTG_BASE_ADDR, 0, &otg_pdata);
-#endif
- imx_add_usb((void *)MX35_USB_HS_BASE_ADDR, 1, &hs_pdata);
-#endif
-
-#ifdef CONFIG_USB_GADGET
- /* Workaround ENGcm09152 */
- tmp = readl(MX35_USB_OTG_BASE_ADDR + 0x608);
- writel(tmp | (1 << 23), MX35_USB_OTG_BASE_ADDR + 0x608);
- add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, MX35_USB_OTG_BASE_ADDR, 0x200,
- IORESOURCE_MEM, &usb_pdata);
-#endif
- armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX35SD);
-
- if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
- defaultenv_append_directory(defaultenv_eukrea_cpuimx35);
-
- return 0;
-}
-
-device_initcall(eukrea_cpuimx35_devices_init);
-
-static int eukrea_cpuimx35_console_init(void)
-{
- barebox_set_model("Eukrea CPUIMX35");
- barebox_set_hostname("eukrea-cpuimx35");
-
- imx35_add_uart0();
- return 0;
-}
-
-console_initcall(eukrea_cpuimx35_console_init);
-
-static int eukrea_cpuimx35_core_init(void)
-{
- u32 reg;
-
- /* enable clock for I2C1, ESDHC1, USB and FEC */
- reg = readl(MX35_CCM_BASE_ADDR + MX35_CCM_CGR0);
- reg |= 0x3 << MX35_CCM_CGR0_ESDHC1_SHIFT;
- reg = writel(reg, MX35_CCM_BASE_ADDR + MX35_CCM_CGR0);
- reg = readl(MX35_CCM_BASE_ADDR + MX35_CCM_CGR1);
- reg |= 0x3 << MX35_CCM_CGR1_FEC_SHIFT;
- reg |= 0x3 << MX35_CCM_CGR1_I2C1_SHIFT;
- reg = writel(reg, MX35_CCM_BASE_ADDR + MX35_CCM_CGR1);
- reg = readl(MX35_CCM_BASE_ADDR + MX35_CCM_CGR2);
- reg |= 0x3 << MX35_CCM_CGR2_USB_SHIFT;
- reg = writel(reg, MX35_CCM_BASE_ADDR + MX35_CCM_CGR2);
-
- /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.*/
- /*
- * Set all MPROTx to be non-bufferable, trusted for R/W,
- * not forced to user-mode.
- */
- writel(0x77777777, MX35_AIPS1_BASE_ADDR);
- writel(0x77777777, MX35_AIPS1_BASE_ADDR + 0x4);
- writel(0x77777777, MX35_AIPS2_BASE_ADDR);
- writel(0x77777777, MX35_AIPS2_BASE_ADDR + 0x4);
-
- /*
- * Clear the on and off peripheral modules Supervisor Protect bit
- * for SDMA to access them. Did not change the AIPS control registers
- * (offset 0x20) access type
- */
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x40);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x44);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x48);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x4C);
- reg = readl(MX35_AIPS1_BASE_ADDR + 0x50);
- reg &= 0x00FFFFFF;
- writel(reg, MX35_AIPS1_BASE_ADDR + 0x50);
-
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x40);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x44);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x48);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x4C);
- reg = readl(MX35_AIPS2_BASE_ADDR + 0x50);
- reg &= 0x00FFFFFF;
- writel(reg, MX35_AIPS2_BASE_ADDR + 0x50);
-
- /* MAX (Multi-Layer AHB Crossbar Switch) setup */
-
- /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-#define MAX_PARAM1 0x00302154
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x000); /* for S0 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x100); /* for S1 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x200); /* for S2 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x300); /* for S3 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x400); /* for S4 */
-
- /* SGPCR - always park on last master */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x10); /* for S0 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x110); /* for S1 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x210); /* for S2 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x310); /* for S3 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x410); /* for S4 */
-
- /* MGPCR - restore default values */
- writel(0x0, MX35_MAX_BASE_ADDR + 0x800); /* for M0 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0x900); /* for M1 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xa00); /* for M2 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xb00); /* for M3 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xc00); /* for M4 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xd00); /* for M5 */
-
- /*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = MAX1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[3] = USB not on priority list (0 << 0) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
- * MRRP[5] = GPU not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
- * ------------
- * 0x00000040
- */
- writel(0x40, MX35_M3IF_BASE_ADDR);
-
- return 0;
-}
-
-core_initcall(eukrea_cpuimx35_core_init);
-
-static int do_cpufreq(int argc, char *argv[])
-{
- unsigned long freq;
-
- if (argc != 2)
- return COMMAND_ERROR_USAGE;
-
- freq = simple_strtoul(argv[1], NULL, 0);
-
- switch (freq) {
- case 399:
- writel(MPCTL_PARAM_399, MX35_CCM_BASE_ADDR + MX35_CCM_MPCTL);
- break;
- case 532:
- writel(MPCTL_PARAM_532, MX35_CCM_BASE_ADDR + MX35_CCM_MPCTL);
- break;
- default:
- return COMMAND_ERROR_USAGE;
- }
-
- printf("Switched CPU frequency to %luMHz\n", freq);
-
- return 0;
-}
-
-BAREBOX_CMD_START(cpufreq)
- .cmd = do_cpufreq,
- BAREBOX_CMD_DESC("adjust CPU frequency")
- BAREBOX_CMD_OPTS("399|532")
- BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
-BAREBOX_CMD_END
diff --git a/arch/arm/boards/eukrea_cpuimx35/flash-header.imxcfg b/arch/arm/boards/eukrea_cpuimx35/flash-header.imxcfg
deleted file mode 100644
index ad187db742..0000000000
--- a/arch/arm/boards/eukrea_cpuimx35/flash-header.imxcfg
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-soc imx35
-loadaddr 0x80000000
-ivtofs 0x400
-
-wm 32 0x53F80004 0x00821000
-wm 32 0x53F80004 0x00821000
-wm 32 0xb8001010 0x00000004
-wm 32 0xB8001010 0x0000000C
-wm 32 0xb8001004 0x0009572B
-wm 32 0xb8001000 0x92220000
-wm 8 0x80000400 0xda
-wm 32 0xb8001000 0xa2220000
-wm 32 0x80000000 0x12344321
-wm 32 0x80000000 0x12344321
-wm 32 0xb8001000 0xb2220000
-wm 8 0x80000033 0xda
-wm 8 0x82000000 0xda
-wm 32 0xb8001000 0x82224080
-wm 32 0xb8001010 0x00000004
diff --git a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c b/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
deleted file mode 100644
index 7970b82136..0000000000
--- a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-
-#include <common.h>
-#include <init.h>
-#include <mach/imx35-regs.h>
-#include <mach/imx-pll.h>
-#include <mach/esdctl.h>
-#include <asm/cache-l2x0.h>
-#include <io.h>
-#include <mach/imx-nand.h>
-#include <asm/barebox-arm.h>
-#include <asm/barebox-arm-head.h>
-#include <asm/sections.h>
-#include <asm-generic/memory_layout.h>
-#include <asm/system.h>
-
-void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- uint32_t r, s;
- unsigned long ccm_base = MX35_CCM_BASE_ADDR;
- register uint32_t loops = 0x20000;
-
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(MX35_IRAM_BASE_ADDR + MX35_IRAM_SIZE);
-
- r = get_cr();
- r |= CR_Z; /* Flow prediction (Z) */
- r |= CR_U; /* unaligned accesses */
- r |= CR_FI; /* Low Int Latency */
-
- __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(s));
- s |= 0x7;
- __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1" : : "r"(s));
-
- set_cr(r);
-
- r = 0;
- __asm__ __volatile__("mcr p15, 0, %0, c15, c2, 4" : : "r"(r));
-
- /*
- * Branch predicition is now enabled. Flush the BTAC to ensure a valid
- * starting point. Don't flush BTAC while it is disabled to avoid
- * ARM1136 erratum 408023.
- */
- __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 6" : : "r"(r));
-
- /* invalidate I cache and D cache */
- __asm__ __volatile__("mcr p15, 0, %0, c7, c7, 0" : : "r"(r));
-
- /* invalidate TLBs */
- __asm__ __volatile__("mcr p15, 0, %0, c8, c7, 0" : : "r"(r));
-
- /* Drain the write buffer */
- __asm__ __volatile__("mcr p15, 0, %0, c7, c10, 4" : : "r"(r));
-
- /* Also setup the Peripheral Port Remap register inside the core */
- r = 0x40000015; /* start from AIPS 2GB region */
- __asm__ __volatile__("mcr p15, 0, %0, c15, c2, 4" : : "r"(r));
-
- /*
- * End of ARM1136 init
- */
-
- writel(0x003F4208, ccm_base + MX35_CCM_CCMR);
-
- /* Set MPLL , arm clock and ahb clock*/
- writel(MPCTL_PARAM_532, ccm_base + MX35_CCM_MPCTL);
-
- writel(PPCTL_PARAM_300, ccm_base + MX35_CCM_PPCTL);
- writel(0x00001000, ccm_base + MX35_CCM_PDR0);
-
- r = readl(ccm_base + MX35_CCM_CGR0);
- r |= 0x3 << MX35_CCM_CGR0_EPIT1_SHIFT;
- writel(r, ccm_base + MX35_CCM_CGR0);
-
- r = readl(ccm_base + MX35_CCM_CGR1);
- r |= 0x3 << MX35_CCM_CGR1_FEC_SHIFT;
- r |= 0x3 << MX35_CCM_CGR1_I2C1_SHIFT;
- r |= 0x3 << MX35_CCM_CGR1_IOMUX_SHIFT;
- writel(r, ccm_base + MX35_CCM_CGR1);
-
- /* enable watchdog asap */
- r = readl(ccm_base + MX35_CCM_CGR2);
- r |= 0x3 << MX35_CCM_CGR2_WDOG_SHIFT;
- writel(r, ccm_base + MX35_CCM_CGR2);
-
- r = readl(MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL);
- r |= 0x1000;
- writel(r, MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL);
-
- /* Skip SDRAM initialization if we run from RAM */
- r = get_pc();
- if (r > 0x80000000 && r < 0x90000000)
- goto out;
-
- /* Init Mobile DDR */
- writel(0x0000000E, MX35_ESDCTL_BASE_ADDR + IMX_ESDMISC);
- writel(0x00000004, MX35_ESDCTL_BASE_ADDR + IMX_ESDMISC);
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-
- writel(0x0009572B, MX35_ESDCTL_BASE_ADDR + IMX_ESDCFG0);
- writel(0x92220000, MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(0xda, MX35_CSD0_BASE_ADDR + 0x400);
- writel(0xA2220000, MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(0xda, MX35_CSD0_BASE_ADDR);
- writeb(0xda, MX35_CSD0_BASE_ADDR);
- writel(0xB2220000, MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(0xda, MX35_CSD0_BASE_ADDR + 0x33);
- writeb(0xda, MX35_CSD0_BASE_ADDR + 0x2000000);
- writel(0x82228080, MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
-
- if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND)) {
- /* Speed up NAND controller by adjusting the NFC divider */
- r = readl(MX35_CCM_BASE_ADDR + MX35_CCM_PDR4);
- r &= ~(0xf << 28);
- r |= 0x1 << 28;
- writel(r, MX35_CCM_BASE_ADDR + MX35_CCM_PDR4);
-
- imx35_barebox_boot_nand_external();
- }
-
-out:
- imx35_barebox_entry(NULL);
-}
diff --git a/arch/arm/boards/eukrea_cpuimx51/Makefile b/arch/arm/boards/eukrea_cpuimx51/Makefile
deleted file mode 100644
index 77bd4cc87a..0000000000
--- a/arch/arm/boards/eukrea_cpuimx51/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-obj-y += eukrea_cpuimx51.o
-lwl-y += lowlevel.o
-bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-eukrea_cpuimx51
diff --git a/arch/arm/boards/eukrea_cpuimx51/defaultenv-eukrea_cpuimx51/bin/init_board b/arch/arm/boards/eukrea_cpuimx51/defaultenv-eukrea_cpuimx51/bin/init_board
deleted file mode 100644
index 0af65822f1..0000000000
--- a/arch/arm/boards/eukrea_cpuimx51/defaultenv-eukrea_cpuimx51/bin/init_board
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh
-
-if [ -f /env/logo.bmp ]; then
- splash /env/logo.bmp
- fb0.enable=1
- gpio_set_value 1 1
-elif [ -f /env/logo.bmp.lzo ]; then
- uncompress /env/logo.bmp.lzo /logo.bmp
- splash /logo.bmp
- fb0.enable=1
- gpio_set_value 1 1
-fi
-
-if [ -z $eth0.ethaddr ]; then
- while [ -z $eth0.ethaddr ]; do
- readline "no MAC address set for eth0. please enter the one found on your board: " eth0.ethaddr
- done
- echo -a /env/config "eth0.ethaddr=$eth0.ethaddr"
- saveenv
-fi
diff --git a/arch/arm/boards/eukrea_cpuimx51/defaultenv-eukrea_cpuimx51/config b/arch/arm/boards/eukrea_cpuimx51/defaultenv-eukrea_cpuimx51/config
deleted file mode 100644
index 57abc1ee3d..0000000000
--- a/arch/arm/boards/eukrea_cpuimx51/defaultenv-eukrea_cpuimx51/config
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/sh
-
-# otg port mode : can be 'host' or 'device'
-otg_mode="device"
-# video mode : can be 'CMO-QVGA' or 'URT-WVGA' or any modefb mode
-# ex : 640x480M-16@60 800x600M-24@60 1024x768M-16@60
-video="CMO-QVGA"
-# screen type : can be 'tft' or 'dvi'
-screen_type="tft"
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=none
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp' or 'nand'
-kernel_loc=nand
-# can be either 'net', 'nand' or 'initrd'
-rootfs_loc=nand
-
-# rootfs
-rootfs_type=ubifs
-rootfsimage=${global.hostname}/rootfs.$rootfs_type
-
-# kernel
-kernelimage=${global.hostname}/uImage-${global.hostname}.bin
-
-# barebox and it's env
-bareboximage=${global.hostname}/barebox-${global.hostname}.bin
-bareboxenvimage=${global.hostname}/bareboxenv-${global.hostname}.bin
-
-nfsroot="$eth0.serverip:/srv/nfs/${global.hostname}"
-
-autoboot_timeout=1
-
-bootargs="console=ttymxc0,115200 otg_mode=$otg_mode video=$video screen_type=$screen_type"
-
-nand_parts="256k(barebox)ro,128k(bareboxenv),3M(kernel),-(root)"
-rootfs_mtdblock_nand=3
-nand_device="mxc_nand"
-ubiroot="${global.hostname}-rootfs"
-device_type="nand"
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
diff --git a/arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c b/arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c
deleted file mode 100644
index 06608c133b..0000000000
--- a/arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer, Pengutronix
-// SPDX-FileCopyrightText: 2011 Eric Bénard <eric@eukrea.com>, Eukrea Electromatique
-
-#include <common.h>
-#include <net.h>
-#include <init.h>
-#include <environment.h>
-#include <mach/imx51-regs.h>
-#include <platform_data/eth-fec.h>
-#include <gpio.h>
-#include <asm/armlinux.h>
-#include <generated/mach-types.h>
-#include <fs.h>
-#include <envfs.h>
-#include <fcntl.h>
-#include <nand.h>
-#include <spi/spi.h>
-#include <io.h>
-#include <asm/mmu.h>
-#include <mach/imx-nand.h>
-#include <mach/spi.h>
-#include <mach/generic.h>
-#include <mach/imx5.h>
-#include <mach/iomux-mx51.h>
-#include <mach/devices-imx51.h>
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_MII,
-};
-
-struct imx_nand_platform_data nand_info = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
- /* FEC */
- NEW_PAD_CTRL(MX51_PAD_DISP2_DAT1__FEC_RX_ER, MX51_PAD_CTRL_5),
- MX51_PAD_DISP2_DAT15__FEC_TDATA0,
- MX51_PAD_DISP2_DAT6__FEC_TDATA1,
- MX51_PAD_DISP2_DAT7__FEC_TDATA2,
- MX51_PAD_DISP2_DAT8__FEC_TDATA3,
- MX51_PAD_DISP2_DAT9__FEC_TX_EN,
- NEW_PAD_CTRL(MX51_PAD_DISP2_DAT10__FEC_COL, MX51_PAD_CTRL_5),
- NEW_PAD_CTRL(MX51_PAD_DISP2_DAT11__FEC_RX_CLK, MX51_PAD_CTRL_5),
- NEW_PAD_CTRL(MX51_PAD_DISP2_DAT12__FEC_RX_DV, MX51_PAD_CTRL_5),
- MX51_PAD_DISP2_DAT13__FEC_TX_CLK,
- MX51_PAD_DI2_PIN4__FEC_CRS,
- MX51_PAD_DI2_PIN2__FEC_MDC,
- NEW_PAD_CTRL(MX51_PAD_DI2_PIN3__FEC_MDIO, MX51_PAD_CTRL_5),
- MX51_PAD_DISP2_DAT14__FEC_RDATA0,
- MX51_PAD_DI2_DISP_CLK__FEC_RDATA1,
- NEW_PAD_CTRL(MX51_PAD_DI_GP4__FEC_RDATA2, MX51_PAD_CTRL_5),
- NEW_PAD_CTRL(MX51_PAD_DISP2_DAT0__FEC_RDATA3, MX51_PAD_CTRL_5),
- MX51_PAD_DI_GP3__FEC_TX_ER,
- MX51_PAD_EIM_DTACK__GPIO2_31, /* LAN8700 reset pin */
- /* NAND */
- MX51_PAD_NANDF_D7__NANDF_D7,
- MX51_PAD_NANDF_D6__NANDF_D6,
- MX51_PAD_NANDF_D5__NANDF_D5,
- MX51_PAD_NANDF_D4__NANDF_D4,
- MX51_PAD_NANDF_D3__NANDF_D3,
- MX51_PAD_NANDF_D2__NANDF_D2,
- MX51_PAD_NANDF_D1__NANDF_D1,
- MX51_PAD_NANDF_D0__NANDF_D0,
- MX51_PAD_NANDF_RB0__NANDF_RB0,
- MX51_PAD_NANDF_RB1__NANDF_RB1,
- MX51_PAD_NANDF_CS0__NANDF_CS0,
- MX51_PAD_NANDF_CS1__NANDF_CS1,
- /* LCD BL */
- MX51_PAD_DI1_D1_CS__GPIO3_4,
-#ifdef CONFIG_MCI_IMX_ESDHC
- /* SD 1 */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
-#endif
-};
-
-#define GPIO_LAN8700_RESET (1 * 32 + 31)
-#define GPIO_LCD_BL (2 * 32 + 4)
-
-static int eukrea_cpuimx51_devices_init(void)
-{
- imx51_add_fec(&fec_info);
-#ifdef CONFIG_MCI_IMX_ESDHC
- imx51_add_mmc0(NULL);
-#endif
- imx51_add_nand(&nand_info);
-
- devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
- dev_add_bb_dev("self_raw", "self0");
- devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
- dev_add_bb_dev("env_raw", "env0");
-
- gpio_direction_output(GPIO_LAN8700_RESET, 0);
- gpio_set_value(GPIO_LAN8700_RESET, 1);
- gpio_direction_output(GPIO_LCD_BL, 0);
-
- armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX51SD);
-
- if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
- defaultenv_append_directory(defaultenv_eukrea_cpuimx51);
-
- return 0;
-}
-
-device_initcall(eukrea_cpuimx51_devices_init);
-
-static int eukrea_cpuimx51_console_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, ARRAY_SIZE(eukrea_cpuimx51_pads));
-
- barebox_set_model("Eukrea CPUIMX51");
- barebox_set_hostname("eukrea-cpuimx51");
-
- imx51_init_lowlevel(800);
-
- imx51_add_uart0();
-
- return 0;
-}
-
-console_initcall(eukrea_cpuimx51_console_init);
diff --git a/arch/arm/boards/eukrea_cpuimx51/flash-header.imxcfg b/arch/arm/boards/eukrea_cpuimx51/flash-header.imxcfg
deleted file mode 100644
index 7f9a8773da..0000000000
--- a/arch/arm/boards/eukrea_cpuimx51/flash-header.imxcfg
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-soc imx51
-ivtofs 0x400
-loadaddr 0x90000000
-wm 32 0x73fa88a0 0x00000200
-wm 32 0x73fa850c 0x000020c5
-wm 32 0x73fa8510 0x000020c5
-wm 32 0x73fa883c 0x00000002
-wm 32 0x73fa8848 0x00000002
-wm 32 0x73fa84b8 0x000000e7
-wm 32 0x73fa84bc 0x00000045
-wm 32 0x73fa84c0 0x00000045
-wm 32 0x73fa84c4 0x00000045
-wm 32 0x73fa84c8 0x00000045
-wm 32 0x73fa8820 0x00000000
-wm 32 0x73fa84a4 0x00000003
-wm 32 0x73fa84a8 0x00000003
-wm 32 0x73fa84ac 0x000000e3
-wm 32 0x73fa84b0 0x000000e3
-wm 32 0x73fa84b4 0x000000e3
-wm 32 0x73fa84cc 0x000000e3
-wm 32 0x73fa84d0 0x000000e2
-wm 32 0x73fa882c 0x00000004
-wm 32 0x73fa88a4 0x00000004
-wm 32 0x73fa88ac 0x00000004
-wm 32 0x73fa88b8 0x00000004
-wm 32 0x83fd9000 0x82a20000
-wm 32 0x83fd9008 0x82a20000
-wm 32 0x83fd9010 0x000ad0d0
-wm 32 0x83fd9004 0x3f3584ab
-wm 32 0x83fd900c 0x3f3584ab
-wm 32 0x83fd9014 0x04008008
-wm 32 0x83fd9014 0x0000801a
-wm 32 0x83fd9014 0x0000801b
-wm 32 0x83fd9014 0x00448019
-wm 32 0x83fd9014 0x07328018
-wm 32 0x83fd9014 0x04008008
-wm 32 0x83fd9014 0x00008010
-wm 32 0x83fd9014 0x00008010
-wm 32 0x83fd9014 0x06328018
-wm 32 0x83fd9014 0x03808019
-wm 32 0x83fd9014 0x00408019
-wm 32 0x83fd9014 0x00008000
-wm 32 0x83fd9014 0x0400800c
-wm 32 0x83fd9014 0x0000801e
-wm 32 0x83fd9014 0x0000801f
-wm 32 0x83fd9014 0x0000801d
-wm 32 0x83fd9014 0x0732801c
-wm 32 0x83fd9014 0x0400800c
-wm 32 0x83fd9014 0x00008014
-wm 32 0x83fd9014 0x00008014
-wm 32 0x83fd9014 0x0632801c
-wm 32 0x83fd9014 0x0380801d
-wm 32 0x83fd9014 0x0040801d
-wm 32 0x83fd9014 0x00008004
-wm 32 0x83fd9000 0xb2a20000
-wm 32 0x83fd9008 0xb2a20000
-wm 32 0x83fd9010 0x000ad6d0
-wm 32 0x83fd9034 0x90000000
-wm 32 0x83fd9014 0x00000000
diff --git a/arch/arm/boards/eukrea_cpuimx51/lowlevel.c b/arch/arm/boards/eukrea_cpuimx51/lowlevel.c
deleted file mode 100644
index cecc3f6c83..0000000000
--- a/arch/arm/boards/eukrea_cpuimx51/lowlevel.c
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <common.h>
-#include <mach/esdctl.h>
-#include <mach/generic.h>
-#include <asm/barebox-arm-head.h>
-
-void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- imx5_cpu_lowlevel_init();
- arm_setup_stack(0x20000000);
- imx51_barebox_entry(NULL);
-}
diff --git a/arch/arm/boards/freescale-mx21-ads/Makefile b/arch/arm/boards/freescale-mx21-ads/Makefile
deleted file mode 100644
index 3e809a8c59..0000000000
--- a/arch/arm/boards/freescale-mx21-ads/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-lwl-y += lowlevel_init.o
-obj-y += imx21ads.o
diff --git a/arch/arm/boards/freescale-mx21-ads/env/bin/init b/arch/arm/boards/freescale-mx21-ads/env/bin/init
deleted file mode 100644
index 224a6b40be..0000000000
--- a/arch/arm/boards/freescale-mx21-ads/env/bin/init
+++ /dev/null
@@ -1 +0,0 @@
-# Dummy Init environment script
diff --git a/arch/arm/boards/freescale-mx21-ads/imx21ads.c b/arch/arm/boards/freescale-mx21-ads/imx21ads.c
deleted file mode 100644
index 0f596b21b9..0000000000
--- a/arch/arm/boards/freescale-mx21-ads/imx21ads.c
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-/*
- * Copyright (C) 2009 Ivo Clarysse
- *
- * Based on imx27ads.c,
- * Copyright (C) 2007 Sascha Hauer, Pengutronix
- */
-
-#include <common.h>
-#include <net.h>
-#include <init.h>
-#include <environment.h>
-#include <mach/imx21-regs.h>
-#include <asm/armlinux.h>
-#include <asm/sections.h>
-#include <asm/barebox-arm.h>
-#include <io.h>
-#include <gpio.h>
-#include <mach/weim.h>
-#include <fs.h>
-#include <linux/sizes.h>
-#include <fcntl.h>
-#include <generated/mach-types.h>
-#include <mach/imx-nand.h>
-#include <platform_data/imxfb.h>
-#include <mach/iomux-mx21.h>
-#include <mach/devices-imx21.h>
-
-#define MX21ADS_IO_REG 0xCC800000
-#define MX21ADS_IO_LCDON (1 << 9)
-
-struct imx_nand_platform_data nand_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-/* Sharp LQ035Q7DB02 QVGA display */
-static struct fb_videomode imx_fb_modedata = {
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 188679,
- .left_margin = 6,
- .right_margin = 16,
- .upper_margin = 8,
- .lower_margin = 10,
- .hsync_len = 2,
- .vsync_len = 1,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
-};
-
-static struct imx_fb_platform_data imx_fb_data = {
- .mode = &imx_fb_modedata,
- .num_modes = 1,
- .cmap_greyscale = 0,
- .cmap_inverse = 0,
- .cmap_static = 0,
- .pwmr = 0x00a903ff,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020008,
- .pcr = 0xfb108bc7,
- .bpp = 16,
-};
-
-static int imx21ads_timing_init(void)
-{
- u32 temp;
-
- /* Configure External Interface Module */
- /* CS0: burst flash */
- imx21_setup_eimcs(0, 0x00003E00, 0x00000E01);
-
- /* CS1: Ethernet controller, external UART, memory-mapped I/O (16-bit) */
- imx21_setup_eimcs(1, 0x00002000, 0x11118501);
-
- /* CS2-CS5: disable */
- imx21_setup_eimcs(2, 0x0, 0x0);
- imx21_setup_eimcs(3, 0x0, 0x0);
- imx21_setup_eimcs(4, 0x0, 0x0);
- imx21_setup_eimcs(5, 0x0, 0x0);
-
- temp = readl(MX21_CCM_BASE_ADDR + MX21_PCDR0);
- temp &= ~0xF000;
- temp |= 0xA000; /* Set NFC divider; 0xA yields 24.18MHz */
- writel(temp, MX21_CCM_BASE_ADDR + MX21_PCDR0);
-
- return 0;
-}
-
-core_initcall(imx21ads_timing_init);
-
-static int mx21ads_mem_init(void)
-{
- arm_add_mem_device("ram0", 0xc0000000, SZ_64M);
-
- return 0;
-}
-mem_initcall(mx21ads_mem_init);
-
-static int mx21ads_devices_init(void)
-{
- int i;
- unsigned int mode[] = {
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA24_PF_REV,
- PA25_PF_CLS,
- PA26_PF_PS,
- PA27_PF_SPL_SPR,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- PA31_PF_OE_ACD,
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- };
-
- /* initizalize gpios */
- for (i = 0; i < ARRAY_SIZE(mode); i++)
- imx21_gpio_mode(mode[i]);
-
- add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX21_CS0_BASE_ADDR,
- 32 * 1024 * 1024, 0);
- imx21_add_nand(&nand_info);
- add_generic_device("cs8900", DEVICE_ID_DYNAMIC, NULL,
- MX21_CS1_BASE_ADDR, 0x1000,
- IORESOURCE_MEM, NULL);
- imx21_add_fb(&imx_fb_data);
-
- armlinux_set_architecture(MACH_TYPE_MX21ADS);
-
- return 0;
-}
-
-device_initcall(mx21ads_devices_init);
-
-static int mx21ads_enable_display(void)
-{
- u16 tmp;
-
- tmp = readw(MX21ADS_IO_REG);
- tmp |= MX21ADS_IO_LCDON;
- writew(tmp, MX21ADS_IO_REG);
- return 0;
-}
-
-late_initcall(mx21ads_enable_display);
-
-static int mx21ads_console_init(void)
-{
- barebox_set_model("Freescale i.MX21 ADS");
- barebox_set_hostname("mx21ads");
-
- imx21_add_uart0();
- return 0;
-}
-
-console_initcall(mx21ads_console_init);
diff --git a/arch/arm/boards/freescale-mx21-ads/lowlevel_init.S b/arch/arm/boards/freescale-mx21-ads/lowlevel_init.S
deleted file mode 100644
index 9b6e4bd472..0000000000
--- a/arch/arm/boards/freescale-mx21-ads/lowlevel_init.S
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2010 Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com>
-
-#include <config.h>
-#include <linux/sizes.h>
-#include <asm-generic/memory_layout.h>
-#include <mach/imx21-regs.h>
-#include <asm/barebox-arm-head.h>
-
- .section ".text_bare_init","ax"
-
-.globl barebox_arm_reset_vector
-barebox_arm_reset_vector:
-
- bl arm_cpu_lowlevel_init
-
-/*
- * Initialize the AHB-Lite IP Interface (AIPI) module (to enable access to
- * on chip peripherals) as described in section 7.2 of rev3 of the i.MX21
- * reference manual.
- */
- ldr r0, =MX21_AIPI_BASE_ADDR + MX21_AIPI1_PSR0
- ldr r1, =0x00040304
- str r1, [r0]
- ldr r0, =MX21_AIPI_BASE_ADDR + MX21_AIPI1_PSR1
- ldr r1, =0xfffbfcfb
- str r1, [r0]
-
- ldr r0, =MX21_AIPI_BASE_ADDR + MX21_AIPI2_PSR0
- ldr r1, =0x3ffc0000
- str r1, [r0]
- ldr r0, =MX21_AIPI_BASE_ADDR + MX21_AIPI2_PSR1
- ldr r1, =0xffffffff
- str r1, [r0]
-
-/*
- * Configure CPU core clock (266MHz), peripheral clock (133MHz) and enable
- * the clock to peripherals.
- */
- ldr r0, =MX21_CCM_BASE_ADDR + MX21_CSCR
- ldr r1, =0x17180607
- str r1, [r0]
-
- ldr r0, =MX21_CCM_BASE_ADDR + MX21_PCCR1
- ldr r1, =0x0e000000
- str r1, [r0]
-
-
-/*
- * SDRAM and SDRAM controller configuration
- */
-
- /*
- * CSD1 not required, because the MX21ADS board only contains 64Mbyte.
- * CS3 can therefore be made available.
- */
- ldr r0, =MX21_SYSCTRL_BASE_ADDR + MX21_FMCR
- ldr r1, =0xffffffc9
- str r1, [r0]
-
- /* Skip SDRAM initialization if we run from RAM */
- cmp pc, #0xc0000000
- bls 1f
- cmp pc, #0xc8000000
- bhi 1f
-
- b ret
-1:
-
- /* Precharge */
- ldr r0, =MX21_X_MEMC_BASE_ADDR + MX21_SDCTL0
- ldr r1, =0x92120300
- str r1, [r0]
- ldr r2, =0xc0200000
- ldr r1, [r2]
-
- bl mem_delay
-
- /* Auto refresh */
- ldr r1, =0xa2120300
- str r1, [r0]
- ldr r2, =0xc0000000
- ldr r1, [r2]
- ldr r1, [r2]
- ldr r1, [r2]
- ldr r1, [r2]
- ldr r1, [r2]
- ldr r1, [r2]
- ldr r1, [r2]
- ldr r1, [r2]
-
- /* Set mode register */
- ldr r1, =0xB2120300
- str r1, [r0]
- ldr r1, =0xC0119800
- ldr r2, [r1]
-
- bl mem_delay
-
- /* Back to Normal Mode */
- ldr r1, =0x8212F339
- str r1, [r0]
-
- /* Set NFC_CLK to 24MHz */
- ldr r0, =MX21_CCM_BASE_ADDR + MX21_PCDR0
- ldr r1, =0x6419a007
- str r1, [r0]
-
-#ifdef CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND
-
- /* Setup a temporary stack in SRAM */
- ldr sp, =MX21_IRAM_BASE_ADDR + MX21_IRAM_SIZE - 4
-
- b imx21_barebox_boot_nand_external
-#endif /* CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND */
-
-ret:
- mov r0, #0xc0000000
- mov r1, #SZ_64M
- mov r2, #0
- b barebox_arm_entry
-
-/*
- * spin for a while. we need to wait at least 200 usecs.
- */
-mem_delay:
- mov r4, #0x4000
-spin: subs r4, r4, #1
- bne spin
- mov pc, lr
-
diff --git a/arch/arm/boards/freescale-mx25-3ds/3stack.c b/arch/arm/boards/freescale-mx25-3ds/3stack.c
deleted file mode 100644
index 824e986f74..0000000000
--- a/arch/arm/boards/freescale-mx25-3ds/3stack.c
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2009 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-
-#include <common.h>
-#include <init.h>
-#include <driver.h>
-#include <gpio.h>
-#include <environment.h>
-#include <mach/imx25-regs.h>
-#include <asm/armlinux.h>
-#include <asm/sections.h>
-#include <asm/barebox-arm.h>
-#include <io.h>
-#include <envfs.h>
-#include <generated/mach-types.h>
-#include <mach/imx-nand.h>
-#include <platform_data/eth-fec.h>
-#include <nand.h>
-#include <mach/iomux-mx25.h>
-#include <mach/generic.h>
-#include <mach/iim.h>
-#include <linux/err.h>
-#include <i2c/i2c.h>
-#include <mfd/mc34704.h>
-#include <mach/devices-imx25.h>
-#include <asm/barebox-arm-head.h>
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_RMII,
- .phy_addr = 1,
-};
-
-struct imx_nand_platform_data nand_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-#ifdef CONFIG_USB
-static void imx25_usb_init(void)
-{
- unsigned int tmp;
-
- /* Host 2 */
- tmp = readl(MX25_USB_OTG_BASE_ADDR + 0x600);
- tmp &= ~(3 << 21);
- tmp |= (2 << 21) | (1 << 4) | (1 << 5);
- writel(tmp, MX25_USB_OTG_BASE_ADDR + 0x600);
-
- tmp = readl(MX25_USB_OTG_BASE_ADDR + 0x584);
- tmp |= 3 << 30;
- writel(tmp, MX25_USB_OTG_BASE_ADDR + 0x584);
-
- /* Set to Host mode */
- tmp = readl(MX25_USB_OTG_BASE_ADDR + 0x5a8);
- writel(tmp | 0x3, MX25_USB_OTG_BASE_ADDR + 0x5a8);
-}
-#endif
-
-static struct i2c_board_info i2c_devices[] = {
- {
- I2C_BOARD_INFO("mc34704", 0x54),
- },
-};
-
-static int imx25_3ds_pmic_init(void)
-{
- struct mc34704 *pmic;
-
- pmic = mc34704_get();
- if (pmic == NULL)
- return -EIO;
-
- return mc34704_reg_write(pmic, 0x2, 0x9);
-}
-
-static int imx25_3ds_fec_init(void)
-{
- int ret;
-
- ret = imx25_3ds_pmic_init();
- if (ret < 0)
- return ret;
-
- /*
- * Set up the FEC_RESET_B and FEC_ENABLE GPIO pins.
- * Assert FEC_RESET_B, then power up the PHY by asserting
- * FEC_ENABLE, at the same time lifting FEC_RESET_B.
- *
- * FEC_RESET_B: gpio2[3] is ALT 5 mode of pin A17
- * FEC_ENABLE_B: gpio4[8] is ALT 5 mode of pin D12
- */
- writel(0x8, MX25_IOMUXC_BASE_ADDR + 0x0238); /* open drain */
- writel(0x0, MX25_IOMUXC_BASE_ADDR + 0x028C); /* cmos, no pu/pd */
-
-#define FEC_ENABLE_GPIO 35
-#define FEC_RESET_B_GPIO 104
-
- /* make the pins output */
- gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */
- gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
- udelay(2);
-
- /* turn on power & lift reset */
- gpio_set_value(FEC_ENABLE_GPIO, 1);
- gpio_set_value(FEC_RESET_B_GPIO, 1);
-
- return 0;
-}
-late_initcall(imx25_3ds_fec_init);
-
-static int imx25_3ds_devices_init(void)
-{
-#ifdef CONFIG_USB
- /* USB does not work yet. Don't know why. Maybe
- * the CPLD has to be initialized.
- */
- imx25_usb_init();
- add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX25_USB_OTG_BASE_ADDR + 0x400, NULL);
-#endif
-
- imx25_iim_register_fec_ethaddr();
- imx25_add_fec(&fec_info);
-
- add_mem_device("sram0", 0x78000000, 128 * 1024, IORESOURCE_MEM_WRITEABLE);
-
- if (readl(MX25_CCM_BASE_ADDR + MX25_CCM_RCSR) & (1 << 14))
- nand_info.width = 2;
-
- imx25_add_nand(&nand_info);
-
- devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
- dev_add_bb_dev("self_raw", "self0");
-
- devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
- dev_add_bb_dev("env_raw", "env0");
-
- i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- imx25_add_i2c0(NULL);
-
- armlinux_set_architecture(MACH_TYPE_MX25_3DS);
- armlinux_set_serial(imx_uid());
-
- if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
- defaultenv_append_directory(defaultenv_freescale_mx25_3ds);
-
- return 0;
-}
-
-device_initcall(imx25_3ds_devices_init);
-
-static iomux_v3_cfg_t imx25_pads[] = {
- MX25_PAD_FEC_MDC__FEC_MDC,
- MX25_PAD_FEC_MDIO__FEC_MDIO,
- MX25_PAD_FEC_RDATA0__FEC_RDATA0,
- MX25_PAD_FEC_RDATA1__FEC_RDATA1,
- MX25_PAD_FEC_RX_DV__FEC_RX_DV,
- MX25_PAD_FEC_TDATA0__FEC_TDATA0,
- MX25_PAD_FEC_TDATA1__FEC_TDATA1,
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX25_PAD_FEC_TX_EN__FEC_TX_EN,
- MX25_PAD_POWER_FAIL__POWER_FAIL,
- MX25_PAD_A17__GPIO_2_3,
- MX25_PAD_D12__GPIO_4_8,
- /* UART1 */
- MX25_PAD_UART1_RXD__UART1_RXD,
- MX25_PAD_UART1_TXD__UART1_TXD,
- MX25_PAD_UART1_RTS__UART1_RTS,
- MX25_PAD_UART1_CTS__UART1_CTS,
- /* USBH2 */
- MX25_PAD_D9__USBH2_PWR,
- MX25_PAD_D8__USBH2_OC,
- MX25_PAD_LD0__USBH2_CLK,
- MX25_PAD_LD1__USBH2_DIR,
- MX25_PAD_LD2__USBH2_STP,
- MX25_PAD_LD3__USBH2_NXT,
- MX25_PAD_LD4__USBH2_DATA0,
- MX25_PAD_LD5__USBH2_DATA1,
- MX25_PAD_LD6__USBH2_DATA2,
- MX25_PAD_LD7__USBH2_DATA3,
- MX25_PAD_HSYNC__USBH2_DATA4,
- MX25_PAD_VSYNC__USBH2_DATA5,
- MX25_PAD_LSCLK__USBH2_DATA6,
- MX25_PAD_OE_ACD__USBH2_DATA7,
- /* i2c */
- MX25_PAD_I2C1_CLK__I2C1_CLK,
- MX25_PAD_I2C1_DAT__I2C1_DAT,
-};
-
-static int imx25_console_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(imx25_pads, ARRAY_SIZE(imx25_pads));
-
- writel(0x03010101, 0x53f80024);
-
- barebox_set_model("Freescale i.MX25 3DS");
- barebox_set_hostname("mx25-3stack");
-
- imx25_add_uart0();
- return 0;
-}
-
-console_initcall(imx25_console_init);
-
-static int imx25_core_setup(void)
-{
- writel(0x01010103, MX25_CCM_BASE_ADDR + MX25_CCM_PCDR2);
- return 0;
-
-}
-core_initcall(imx25_core_setup);
diff --git a/arch/arm/boards/freescale-mx25-3ds/Makefile b/arch/arm/boards/freescale-mx25-3ds/Makefile
deleted file mode 100644
index dbb2e77ecb..0000000000
--- a/arch/arm/boards/freescale-mx25-3ds/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Juergen Beisert <jbe@pengutronix.de>
-
-lwl-y += lowlevel_init.o
-obj-y += 3stack.o
-bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-freescale-mx25-3ds
diff --git a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/_update b/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/_update
deleted file mode 100644
index 014bce3512..0000000000
--- a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/_update
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-
-if [ -z "$part" -o -z "$image" ]; then
- echo "define \$part and \$image"
- exit 1
-fi
-
-if [ ! -e "$part" ]; then
- echo "Partition $part does not exist"
- exit 1
-fi
-
-if [ $# = 1 ]; then
- image=$1
-fi
-
-if [ x$ip = xdhcp ]; then
- dhcp
-fi
-
-ping $eth0.serverip
-if [ $? -ne 0 ] ; then
- echo "update aborted"
- exit 1
-fi
-
-unprotect $part
-
-echo
-echo "erasing partition $part"
-erase $part
-
-echo
-echo "flashing $image to $part"
-echo
-tftp $image $part
diff --git a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/boot b/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/boot
deleted file mode 100644
index 7bbff2d1f6..0000000000
--- a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/boot
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-if [ x$1 = xnand ]; then
- root=nand
- kernel=nand
-fi
-
-if [ x$1 = xnet ]; then
- root=net
- kernel=net
-fi
-
-if [ x$1 = xnor ]; then
- root=nor
- kernel=nor
-fi
-
-if [ x$ip = xdhcp ]; then
- bootargs="$bootargs ip=dhcp"
-else
- bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask:::"
-fi
-
-if [ x$root = xnand ]; then
- bootargs="$bootargs root=$rootpart_nand rootfstype=jffs2"
-elif [ x$root = xnor ]; then
- bootargs="$bootargs root=$rootpart_nor rootfstype=jffs2"
-else
- bootargs="$bootargs root=/dev/nfs nfsroot=$eth0.serverip:$nfsroot,v3,tcp"
-fi
-
-bootargs="$bootargs mtdparts=physmap-flash.0:$nor_parts;mxc_nand:$nand_parts"
-
-if [ $kernel = net ]; then
- if [ x$ip = xdhcp ]; then
- dhcp
- fi
- tftp $uimage uImage || exit 1
- bootm uImage
-elif [ $kernel = nor ]; then
- bootm /dev/nor0.kernel
-else
- bootm /dev/nand0.kernel.bb
-fi
-
diff --git a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/init b/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/init
deleted file mode 100644
index 8eafa34dc8..0000000000
--- a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/init
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/sh
-
-PATH=/env/bin
-export PATH
-
-. /env/config
-if [ -e /dev/nor0 ]; then
- addpart /dev/nor0 $nor_parts
-fi
-
-if [ -e /dev/nand0 ]; then
- addpart /dev/nand0 $nand_parts
-fi
-
-echo
-echo -n "Hit any key to stop autoboot: "
-timeout -a $autoboot_timeout
-if [ $? != 0 ]; then
- echo
- echo "type update_kernel nand|nor [<imagename>] to update kernel into flash"
- echo "type update_root nand|nor [<imagename>] to update rootfs into flash"
- echo
- exit
-fi
-
-boot
diff --git a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/update_kernel b/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/update_kernel
deleted file mode 100644
index 05c822d860..0000000000
--- a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/update_kernel
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-image=$uimage
-if [ x$1 = xnand ]; then
- part=/dev/nand0.kernel.bb
-elif [ x$1 = xnor ]; then
- part=/dev/nor0.kernel
-else
- echo "usage: $0 nor|nand [imagename]"
- exit 1
-fi
-
-. /env/bin/_update $2
diff --git a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/update_root b/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/update_root
deleted file mode 100644
index eaf36ebcea..0000000000
--- a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/bin/update_root
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-image=$uimage
-if [ x$1 = xnand ]; then
- part=/dev/nand0.root.bb
-elif [ x$1 = xnor ]; then
- part=/dev/nor0.root
-else
- echo "usage: $0 nor|nand [imagename]"
- exit 1
-fi
-
-. /env/bin/_update $2
-
diff --git a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/config b/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/config
deleted file mode 100644
index 8469935b20..0000000000
--- a/arch/arm/boards/freescale-mx25-3ds/defaultenv-freescale-mx25-3ds/config
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh
-
-# can be either 'net', 'nor' or 'nand''
-kernel=net
-root=net
-
-uimage=uImage-pcm043
-jffs2=root-pcm043.jffs2
-
-autoboot_timeout=3
-
-nfsroot="/ptx/work/octopus/rsc/svn/oselas/bsp/phytec/phyCORE-i.MX27/OSELAS.BSP-Phytec-phyCORE-i.MX27-trunk/root"
-bootargs="console=ttymxc0,115200"
-
-nor_parts="256k(barebox)ro,128k(bareboxenv),2048k(kernel),-(root)"
-rootpart_nor="/dev/mtdblock3"
-
-nand_parts="256k(barebox)ro,128k(bareboxenv),2048k(kernel),108416k(root),-(kernel1)"
-rootpart_nand="/dev/mtdblock7"
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-#ip=dhcp
-
-# or set your networking parameters here
-eth0.ipaddr=192.168.3.11
-eth0.netmask=255.255.255.0
-#eth0.gateway=a.b.c.d
-eth0.serverip=192.168.3.10
-#eth0.ethaddr=
diff --git a/arch/arm/boards/freescale-mx25-3ds/flash-header.imxcfg b/arch/arm/boards/freescale-mx25-3ds/flash-header.imxcfg
deleted file mode 100644
index 9f83d102cb..0000000000
--- a/arch/arm/boards/freescale-mx25-3ds/flash-header.imxcfg
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-soc imx25
-loadaddr 0x80000000
-ivtofs 0x400
-wm 32 0xb8002050 0x0000d843
-wm 32 0xb8002054 0x22252521
-wm 32 0xb8002058 0x22220a00
-#if defined CONFIG_FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2
-wm 32 0xb8001004 0x0076e83a
-wm 32 0xb8001010 0x00000304
-wm 32 0xb8001000 0x92210000
-wm 32 0x80000f00 0x12344321
-wm 32 0xb8001000 0xb2210000
-wm 8 0x82000000 0xda
-wm 8 0x83000000 0xda
-wm 8 0x81000400 0xda
-wm 8 0x80000333 0xda
-wm 32 0xb8001000 0x92210000
-wm 32 0x80000400 0x12344321
-wm 32 0xb8001000 0xa2210000
-wm 32 0x80000000 0x87654321
-wm 32 0x80000000 0x87654321
-wm 32 0xb8001000 0xb2210000
-wm 8 0x80000233 0xda
-wm 8 0x81000780 0xda
-wm 8 0x81000400 0xda
-wm 32 0xb8001000 0x82216080
-#elif defined CONFIG_FREESCALE_MX25_3STACK_SDRAM_128MB_MDDR
-wm 32 0xb8001010 0x00000004
-wm 32 0xb8001000 0x92100000
-wm 8 0x80000400 0x21
-wm 32 0xb8001000 0xa2100000
-wm 32 0x80000000 0x12344321
-wm 32 0x80000000 0x12344321
-wm 32 0xb8001000 0xb2100000
-wm 8 0x80000033 0xda
-wm 8 0x81000000 0xff
-wm 32 0xb8001000 0x82216880
-wm 32 0xb8001004 0x00295729
-#else
-#error "Unsupported SDRAM type"
-#endif
-wm 32 0x53f80008 0x20034000
diff --git a/arch/arm/boards/freescale-mx25-3ds/lowlevel_init.S b/arch/arm/boards/freescale-mx25-3ds/lowlevel_init.S
deleted file mode 100644
index 9be9c1a77b..0000000000
--- a/arch/arm/boards/freescale-mx25-3ds/lowlevel_init.S
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-
-#include <linux/sizes.h>
-#include <asm-generic/memory_layout.h>
-#include <mach/imx25-regs.h>
-#include <mach/imx-pll.h>
-#include <mach/esdctl.h>
-#include <asm/barebox-arm-head.h>
-
-#define writel(val, reg) \
- ldr r0, =reg; \
- ldr r1, =val; \
- str r1, [r0];
-
-#define writeb(val, reg) \
- ldr r0, =reg; \
- ldr r1, =val; \
- strb r1, [r0];
-
-/* Assuming 24MHz input clock */
-#define MPCTL_PARAM_532_MX25 \
- (IMX_PLL_PD(1) | IMX_PLL_MFD(0) | IMX_PLL_MFI(11) | IMX_PLL_MFN(1))
-
-.section ".text_bare_init","ax"
-
-ARM_PPMRR: .word 0x40000015
-L2CACHE_PARAM: .word 0x00030024
-CCM_CCMR_W: .word 0x003F4208
-CCM_PDR0_W: .word 0x00801000
-MPCTL_PARAM_399_W: .word MPCTL_PARAM_399
-MPCTL_PARAM_532_W: .word MPCTL_PARAM_532_MX25
-PPCTL_PARAM_W: .word PPCTL_PARAM_300
-CCM_BASE_ADDR_W: .word MX25_CCM_BASE_ADDR
-
-.globl barebox_arm_reset_vector
-barebox_arm_reset_vector:
- bl arm_cpu_lowlevel_init
-
-#define MX25_CCM_MCR 0x64
-
- ldr r0, CCM_BASE_ADDR_W
- /* default CLKO to 1/32 of the ARM core */
- ldr r1, [r0, #MX25_CCM_MCR]
- bic r1, r1, #0x00F00000
- bic r1, r1, #0x7F000000
- mov r2, #0x5F000000
- add r2, r2, #0x00200000
- orr r1, r1, r2
- str r1, [r0, #MX25_CCM_MCR]
-
- /* enable all the clocks */
- writel(0x1FFFFFFF, MX25_CCM_BASE_ADDR + MX25_CCM_CGCR0)
- writel(0xFFFFFFFF, MX25_CCM_BASE_ADDR + MX25_CCM_CGCR1)
- writel(0x000FDFFF, MX25_CCM_BASE_ADDR + MX25_CCM_CGCR2)
- writel(0x0000FEFF, MX25_CCM_BASE_ADDR + MX25_CCM_MCR)
-
- /* Setup a temporary stack in SRAM */
- ldr sp, =MX25_IRAM_BASE_ADDR + MX25_IRAM_SIZE - 4
-
- /* Skip SDRAM initialization if we run from RAM */
- cmp pc, #0x80000000
- bls 1f
- cmp pc, #0x90000000
- bhi 1f
-
- b imx25_barebox_entry
-
-1:
- ldr r0, ESDCTL_BASE_W
- mov r3, #0x2000
- str r3, [r0, #0x0]
- str r3, [r0, #0x8]
-
- mov r12, #0x00
- mov r2, #0x1 /* mDDR */
- mov r1, #MX25_CSD0_BASE_ADDR
- bl setup_sdram_bank
-// cmp r3, #0x0
-// orreq r12, r12, #1
-// eorne r2, r2, #0x1
-// blne setup_sdram_bank
-
- ldr r3, ESDCTL_DELAY5
- str r3, [r0, #0x30]
-
-#ifdef CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND
-
- mov r0, #0
- b imx25_barebox_boot_nand_external
-#endif /* CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND */
-
-ret:
- b imx25_barebox_entry
-
-/*
- * r0: control base, r1: ram bank base
- * r2: ddr type(0:DDR2, 1:MDDR) r3, r4: working
- */
-setup_sdram_bank:
- mov r3, #0xE /* 0xA + 0x4 */
- tst r2, #0x1
- orreq r3, r3, #0x300 /* DDR2 */
- str r3, [r0, #0x10]
- bic r3, r3, #0x00A
- str r3, [r0, #0x10]
- beq 2f
-
- mov r3, #0x20000
-1: subs r3, r3, #1
- bne 1b
-
-2: adr r4, ESDCTL_CONFIG
- tst r2, #0x1
- ldreq r3, [r4, #0x0]
- ldrne r3, [r4, #0x4]
- cmp r1, #MX25_CSD1_BASE_ADDR
- strlo r3, [r0, #0x4]
- strhs r3, [r0, #0xC]
-
- ldr r3, ESDCTL_0x92220000
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
- mov r3, #0xDA
- ldr r4, RAM_PARAM1_MDDR
- strb r3, [r1, r4]
-
- tst r2, #0x1
- bne skip_set_mode
-
- cmp r1, #MX25_CSD1_BASE_ADDR
- ldr r3, ESDCTL_0xB2220000
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
- mov r3, #0xDA
- ldr r4, RAM_PARAM4_MDDR
- strb r3, [r1, r4]
- ldr r4, RAM_PARAM5_MDDR
- strb r3, [r1, r4]
- ldr r4, RAM_PARAM3_MDDR
- strb r3, [r1, r4]
- ldr r4, RAM_PARAM2_MDDR
- strb r3, [r1, r4]
-
- ldr r3, ESDCTL_0x92220000
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
- mov r3, #0xDA
- ldr r4, RAM_PARAM1_MDDR
- strb r3, [r1, r4]
-
-skip_set_mode:
- cmp r1, #MX25_CSD1_BASE_ADDR
- ldr r3, ESDCTL_0xA2220000
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
- mov r3, #0xDA
- strb r3, [r1]
- strb r3, [r1]
-
- ldr r3, ESDCTL_0xB2220000
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
- adr r4, RAM_PARAM6_MDDR
- tst r2, #0x1
- ldreq r4, [r4, #0x0]
- ldrne r4, [r4, #0x4]
- mov r3, #0xDA
- strb r3, [r1, r4]
- ldreq r4, RAM_PARAM7_MDDR
- streqb r3, [r1, r4]
- adr r4, RAM_PARAM3_MDDR
- ldreq r4, [r4, #0x0]
- ldrne r4, [r4, #0x4]
- strb r3, [r1, r4]
-
- cmp r1, #MX25_CSD1_BASE_ADDR
- ldr r3, ESDCTL_0x82226080
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
-
- tst r2, #0x1
- moveq r4, #0x20000
- movne r4, #0x200
-1: subs r4, r4, #1
- bne 1b
-
- str r3, [r1, #0x100]
- ldr r4, [r1, #0x100]
- cmp r3, r4
- movne r3, #1
- moveq r3, #0
-
- mov pc, lr
-
-RAM_PARAM1_MDDR: .word 0x00000400
-RAM_PARAM2_MDDR: .word 0x00000333
-RAM_PARAM3_MDDR: .word 0x02000400
- .word 0x02000000
-RAM_PARAM4_MDDR: .word 0x04000000
-RAM_PARAM5_MDDR: .word 0x06000000
-RAM_PARAM6_MDDR: .word 0x00000233
- .word 0x00000033
-RAM_PARAM7_MDDR: .word 0x02000780
-ESDCTL_0x92220000: .word 0x92210000
-ESDCTL_0xA2220000: .word 0xA2210000
-ESDCTL_0xB2220000: .word 0xB2210000
-ESDCTL_0x82226080: .word 0x82216080
-ESDCTL_CONFIG: .word 0x007FFC3F
- .word 0x007FFC3F
-ESDCTL_DELAY5: .word 0x00F49F00
-ESDCTL_BASE_W: .word MX25_ESDCTL_BASE_ADDR
-
diff --git a/arch/arm/boards/freescale-mx27-ads/Makefile b/arch/arm/boards/freescale-mx27-ads/Makefile
deleted file mode 100644
index 9fd43dd984..0000000000
--- a/arch/arm/boards/freescale-mx27-ads/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-lwl-y += lowlevel_init.o
-obj-y += imx27ads.o
diff --git a/arch/arm/boards/freescale-mx27-ads/env/bin/_update b/arch/arm/boards/freescale-mx27-ads/env/bin/_update
deleted file mode 100644
index 014bce3512..0000000000
--- a/arch/arm/boards/freescale-mx27-ads/env/bin/_update
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-
-if [ -z "$part" -o -z "$image" ]; then
- echo "define \$part and \$image"
- exit 1
-fi
-
-if [ ! -e "$part" ]; then
- echo "Partition $part does not exist"
- exit 1
-fi
-
-if [ $# = 1 ]; then
- image=$1
-fi
-
-if [ x$ip = xdhcp ]; then
- dhcp
-fi
-
-ping $eth0.serverip
-if [ $? -ne 0 ] ; then
- echo "update aborted"
- exit 1
-fi
-
-unprotect $part
-
-echo
-echo "erasing partition $part"
-erase $part
-
-echo
-echo "flashing $image to $part"
-echo
-tftp $image $part
diff --git a/arch/arm/boards/freescale-mx27-ads/env/bin/boot b/arch/arm/boards/freescale-mx27-ads/env/bin/boot
deleted file mode 100644
index 3859dc113b..0000000000
--- a/arch/arm/boards/freescale-mx27-ads/env/bin/boot
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-if [ x$1 = xflash ]; then
- root=flash
- kernel=flash
-fi
-
-if [ x$1 = xnet ]; then
- root=net
- kernel=net
-fi
-
-if [ x$ip = xdhcp ]; then
- bootargs="$bootargs ip=dhcp"
-else
- bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask:::"
-fi
-
-if [ x$root = xflash ]; then
- bootargs="$bootargs root=$rootpart rootfstype=jffs2"
-else
- bootargs="$bootargs root=/dev/nfs nfsroot=$eth0.serverip:$nfsroot,v3,tcp"
-fi
-
-bootargs="$bootargs mtdparts=physmap-flash.0:$mtdparts"
-
-if [ $kernel = net ]; then
- if [ x$ip = xdhcp ]; then
- dhcp
- fi
- tftp $uimage uImage || exit 1
- bootm uImage
-else
- bootm /dev/nor0.kernel
-fi
-
diff --git a/arch/arm/boards/freescale-mx27-ads/env/bin/init b/arch/arm/boards/freescale-mx27-ads/env/bin/init
deleted file mode 100644
index 48e2139f7d..0000000000
--- a/arch/arm/boards/freescale-mx27-ads/env/bin/init
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh
-
-PATH=/env/bin
-export PATH
-
-. /env/config
-addpart /dev/nor0 $mtdparts
-
-echo
-echo -n "Hit any key to stop autoboot: "
-timeout -a $autoboot_timeout
-if [ $? != 0 ]; then
- echo
- echo "type update_kernel [<imagename>] to update kernel into flash"
- echo "type udate_root [<imagename>] to update rootfs into flash"
- echo
- exit
-fi
-
-boot
\ No newline at end of file
diff --git a/arch/arm/boards/freescale-mx27-ads/env/bin/update_kernel b/arch/arm/boards/freescale-mx27-ads/env/bin/update_kernel
deleted file mode 100644
index 1ad95fc5d6..0000000000
--- a/arch/arm/boards/freescale-mx27-ads/env/bin/update_kernel
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-image=$uimage
-part=/dev/nor0.kernel
-
-. /env/bin/_update $1
diff --git a/arch/arm/boards/freescale-mx27-ads/env/bin/update_root b/arch/arm/boards/freescale-mx27-ads/env/bin/update_root
deleted file mode 100644
index b757a5b922..0000000000
--- a/arch/arm/boards/freescale-mx27-ads/env/bin/update_root
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-image=$jffs2
-part=/dev/nor0.root
-
-. /env/bin/_update $1
diff --git a/arch/arm/boards/freescale-mx27-ads/env/config b/arch/arm/boards/freescale-mx27-ads/env/config
deleted file mode 100644
index f18a86b7c1..0000000000
--- a/arch/arm/boards/freescale-mx27-ads/env/config
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/sh
-
-# can be either 'net' or 'flash'
-kernel=net
-root=net
-
-# use 'dhcp' todo dhcp in barebox and in kernel
-ip=dhcp
-
-eth0.ipaddr=192.168.23.164
-eth0.netmask=255.255.255.0
-eth0.gateway=192.168.23.2
-eth0.serverip=192.168.23.2
-
-uimage=uImage-mx27ads
-jffs2=root-mx27ads.jffs2
-
-autoboot_timeout=3
-
-nfsroot="/tmp/imx27ads"
-bootargs="console=ttymxc0,115200"
-
-mtdparts="128k(barebox)ro,128k(bareboxenv),1536k(kernel),-(root)"
-rootpart="/dev/mtdblock3"
-
diff --git a/arch/arm/boards/freescale-mx27-ads/imx27ads.c b/arch/arm/boards/freescale-mx27-ads/imx27ads.c
deleted file mode 100644
index 1ea4b39ae3..0000000000
--- a/arch/arm/boards/freescale-mx27-ads/imx27ads.c
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer, Pengutronix
-
-#include <common.h>
-#include <net.h>
-#include <init.h>
-#include <environment.h>
-#include <mach/imx27-regs.h>
-#include <asm/armlinux.h>
-#include <io.h>
-#include <platform_data/eth-fec.h>
-#include <gpio.h>
-#include <mach/weim.h>
-#include <fs.h>
-#include <fcntl.h>
-#include <generated/mach-types.h>
-#include <mach/iomux-mx27.h>
-#include <mach/devices-imx27.h>
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_MII,
- .phy_addr = 1,
-};
-
-static int imx27ads_timing_init(void)
-{
- /* configure cpld on cs4 */
- imx27_setup_weimcs(4, 0x0000DCF6, 0x444A4541, 0x44443302);
-
- /* configure synchronous mode for
- * 16 bit nor flash on cs0 */
- imx27_setup_weimcs(0, 0x0000CC03, 0xa0330D01, 0x00220800);
-
- writew(0x00f0, 0xc0000000);
- writew(0x00aa, 0xc0000aaa);
- writew(0x0055, 0xc0000554);
- writew(0x00d0, 0xc0000aaa);
- writew(0x66ca, 0xc0000aaa);
- writew(0x00f0, 0xc0000000);
-
- imx27_setup_weimcs(0, 0x23524E80, 0x10000D03, 0x00720900);
-
- /* Select FEC data through data path */
- writew(0x0020, MX27_CS4_BASE_ADDR + 0x10);
-
- /* Enable CPLD FEC data path */
- writew(0x0010, MX27_CS4_BASE_ADDR + 0x14);
-
- return 0;
-}
-
-core_initcall(imx27ads_timing_init);
-
-static int mx27ads_devices_init(void)
-{
- int i;
- unsigned int mode[] = {
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC | GPIO_PUEN,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- };
-
- /* initizalize gpios */
- for (i = 0; i < ARRAY_SIZE(mode); i++)
- imx27_gpio_mode(mode[i]);
-
- add_cfi_flash_device(DEVICE_ID_DYNAMIC, 0xC0000000, 32 * 1024 * 1024, 0);
-
- imx27_add_fec(&fec_info);
- devfs_add_partition("nor0", 0x00000, 0x20000, DEVFS_PARTITION_FIXED, "self0");
- devfs_add_partition("nor0", 0x20000, 0x20000, DEVFS_PARTITION_FIXED, "env0");
- protect_file("/dev/env0", 1);
-
- armlinux_set_architecture(MACH_TYPE_MX27ADS);
-
- return 0;
-}
-
-device_initcall(mx27ads_devices_init);
-
-static int mx27ads_console_init(void)
-{
- barebox_set_model("Freescale i.MX27 ADS");
- barebox_set_hostname("mx27ads");
-
- imx27_add_uart0();
- return 0;
-}
-
-console_initcall(mx27ads_console_init);
-
diff --git a/arch/arm/boards/freescale-mx27-ads/lowlevel_init.S b/arch/arm/boards/freescale-mx27-ads/lowlevel_init.S
deleted file mode 100644
index bd78ebf9e8..0000000000
--- a/arch/arm/boards/freescale-mx27-ads/lowlevel_init.S
+++ /dev/null
@@ -1,116 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-/*
- * For clock initialization, see chapter 3 of the "MCIMX27 Multimedia
- * Applications Processor Reference Manual, Rev. 0.2".
- *
- */
-
-#include <config.h>
-#include <mach/imx27-regs.h>
-#include <asm/barebox-arm-head.h>
-
-#define writel(val, reg) \
- ldr r0, =reg; \
- ldr r1, =val; \
- str r1, [r0];
-
-#define CRM_PLL_PCTL_PARAM(pd, fd, fi, fn) (((pd-1)<<26) + ((fd-1)<<16) + (fi<<10) + (fn<<0))
-
-.macro sdram_init
- /*
- * DDR on CSD0
- */
- writel(0x00000008, 0xD8001010)
- writel(0x55555555, 0x10027828)
- writel(0x55555555, 0x10027830)
- writel(0x55555555, 0x10027834)
- writel(0x00005005, 0x10027838)
- writel(0x15555555, 0x1002783C)
- writel(0x00000004, 0xD8001010)
- writel(0x006ac73a, 0xD8001004)
- writel(0x92100000, 0xD8001000)
- writel(0x00000000, 0xA0000F00)
- writel(0xA2100000, 0xD8001000)
- writel(0x00000000, 0xA0000F00)
- writel(0x00000000, 0xA0000F00)
- writel(0x00000000, 0xA0000F00)
- writel(0x00000000, 0xA0000F00)
- writel(0xA2200000, 0xD8001000)
- writel(0x00000000, 0xA0000F00)
- writel(0x00000000, 0xA0000F00)
- writel(0x00000000, 0xA0000F00)
- writel(0x00000000, 0xA0000F00)
- writel(0xb2100000, 0xD8001000)
- ldr r0, =0xA0000033
- mov r1, #0xda
- strb r1, [r0]
- ldr r0, =0xA1000000
- mov r1, #0xff
- strb r1, [r0]
- writel(0x82226080, 0xD8001000)
-.endm
-
-.globl barebox_arm_reset_vector
-barebox_arm_reset_vector:
-
- bl arm_cpu_lowlevel_init
-
- ldr sp, =MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE - 4;
-
- /* ahb lite ip interface */
- writel(0x20040304, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR0)
- writel(0xDFFBFCFB, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR1)
- writel(0x00000000, MX27_AIPI_BASE_ADDR + MX27_AIPI2_PSR0)
- writel(0xFFFFFFFF, MX27_AIPI_BASE_ADDR + MX27_AIPI2_PSR1)
-
- /* disable mpll/spll */
- ldr r0, =MX27_CCM_BASE_ADDR + MX27_CSCR
- ldr r1, [r0]
- bic r1, r1, #0x03
- str r1, [r0]
-
- /*
- * pll clock initialization - see section 3.4.3 of the i.MX27 manual
- *
- * FIXME: Using the 399*2 MHz values from table 3-8 doens't work
- * with 1.2 V core voltage! Find out if this is
- * documented somewhere.
- */
- writel(0x00191403, MX27_CCM_BASE_ADDR + MX27_MPCTL0) /* MPLL = 199.5*2 MHz */
- writel(0x040C2403, MX27_CCM_BASE_ADDR + MX27_SPCTL0) /* SPLL = FIXME (needs review) */
-
- /*
- * ARM clock = (399 MHz / 2) / (ARM divider = 1) = 200 MHz
- * AHB clock = (399 MHz / 3) / (AHB divider = 2) = 66.5 MHz
- * System clock (HCLK) = 133 MHz
- */
- writel(0x33F30307 | MX27_CSCR_MPLL_RESTART | MX27_CSCR_SPLL_RESTART,
- MX27_CCM_BASE_ADDR + MX27_CSCR)
-
- /* add some delay here */
- mov r1, #0x1000
-1: subs r1, r1, #0x1
- bne 1b
-
- /* clock gating enable */
- writel(0x00050f08, MX27_SYSCTRL_BASE_ADDR + MX27_GPCR)
-
- /* peripheral clock divider */
- /* FIXME */
- writel(0x23C8F403, MX27_CCM_BASE_ADDR + MX27_PCDR0)
- /* PERDIV1=08 @133 MHz */
- /* PERDIV1=04 @266 MHz */
- writel(0x09030913, MX27_CCM_BASE_ADDR + MX27_PCDR1)
- /* skip sdram initialization if we run from ram */
- cmp pc, #0xa0000000
- bls 1f
- cmp pc, #0xc0000000
- bhi 1f
-
- b imx27_barebox_entry
-1:
- sdram_init
-
- b imx27_barebox_entry
-
diff --git a/arch/arm/boards/freescale-mx35-3ds/3stack.c b/arch/arm/boards/freescale-mx35-3ds/3stack.c
deleted file mode 100644
index f18703fc7f..0000000000
--- a/arch/arm/boards/freescale-mx35-3ds/3stack.c
+++ /dev/null
@@ -1,454 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-/*
- * Copyright (C) 2007 Sascha Hauer, Pengutronix
- * 2009 Marc Kleine-Budde, Pengutronix
- *
- * Derived from:
- *
- * * mx35_3stack.c - board file for uboot-v1
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <environment.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <platform_data/eth-fec.h>
-#include <fs.h>
-#include <init.h>
-#include <nand.h>
-#include <net.h>
-#include <envfs.h>
-#include <linux/sizes.h>
-#include <gpio.h>
-
-#include <asm/armlinux.h>
-#include <asm/sections.h>
-#include <asm/barebox-arm.h>
-#include <io.h>
-#include <generated/mach-types.h>
-
-#include <mach/weim.h>
-#include <mach/imx-nand.h>
-#include <mach/imx35-regs.h>
-#include <mach/iomux-mx35.h>
-#include <mach/iomux-v3.h>
-#include <mach/imx-ipu-fb.h>
-#include <mach/generic.h>
-#include <mach/devices-imx35.h>
-#include <mach/revision.h>
-
-#include <i2c/i2c.h>
-#include <mfd/mc13xxx.h>
-#include <mfd/mc9sdz60.h>
-
-
-/* Board rev for the PDK 3stack */
-#define MX35PDK_BOARD_REV_1 0
-#define MX35PDK_BOARD_REV_2 1
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_MII,
- .phy_addr = 0x1F,
-};
-
-struct imx_nand_platform_data nand_info = {
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static struct i2c_board_info i2c_devices[] = {
- {
- I2C_BOARD_INFO("mc13892", 0x08),
- }, {
- I2C_BOARD_INFO("mc9sdz60", 0x69),
- },
-};
-
-/*
- * Generic display, shipped with the PDK
- */
-static struct fb_videomode CTP_CLAA070LC0ACW = {
- /* 800x480 @ 60 Hz */
- .name = "CTP-CLAA070LC0ACW",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = KHZ2PICOS(27000),
- .left_margin = 50,
- .right_margin = 50, /* whole line should have 900 clocks */
- .upper_margin = 10,
- .lower_margin = 10, /* whole frame should have 500 lines */
- .hsync_len = 1, /* note: DE only display */
- .vsync_len = 1, /* note: DE only display */
- .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
-};
-
-static struct imx_ipu_fb_platform_data ipu_fb_data = {
- .mode = &CTP_CLAA070LC0ACW,
- .num_modes = 1,
- .bpp = 16,
-};
-
-/*
- * Revision to be passed to kernel. The kernel provided
- * by freescale relies on this.
- *
- * C --> CPU type
- * S --> Silicon revision
- * B --> Board rev
- *
- * 31 20 16 12 8 4 0
- * | Cmaj | Cmin | B | Smaj | Smin|
- *
- * e.g 0x00035120 --> i.MX35, Cpu silicon rev 2.0, Board rev 2
-*/
-static unsigned int imx35_3ds_system_rev = 0x00035000;
-
-static void set_silicon_rev( int rev)
-{
- imx35_3ds_system_rev = imx35_3ds_system_rev | (rev & 0xFF);
-}
-
-static void set_board_rev(int rev)
-{
- imx35_3ds_system_rev = (imx35_3ds_system_rev & ~(0xF << 8)) | (rev & 0xF) << 8;
-}
-
-static const struct devfs_partition f3s_nand0_partitions[] = {
- {
- .offset = 0,
- .size = 0x40000,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "self_raw",
- .bbname = "self0",
- }, {
- .offset = DEVFS_PARTITION_APPEND, /* 0x40000 */
- .size = 0x80000,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "env_raw",
- .bbname = "env0",
- }, {
- /* sentinel */
- }
-};
-
-static const struct devfs_partition f3s_nor0_partitions[] = {
- {
- .offset = 0,
- .size = 0x40000,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "self0",
- }, {
- .offset = DEVFS_PARTITION_APPEND, /* 0x40000 */
- .size = 0x80000,
- .flags = DEVFS_PARTITION_FIXED,
- .name = "env0",
- }, {
- /* sentinel */
- }
-};
-
-static int f3s_devices_init(void)
-{
- uint32_t reg;
-
- /* CS0: Nor Flash */
- imx35_setup_weimcs(0, 0x0000cf03, 0x10000d03, 0x00720900);
-
- reg = readl(MX35_CCM_BASE_ADDR + MX35_CCM_RCSR);
- /* some fuses provide us vital information about connected hardware */
- if (reg & 0x20000000)
- nand_info.width = 2; /* 16 bit */
- else
- nand_info.width = 1; /* 8 bit */
-
- /*
- * This platform supports NOR and NAND
- */
- imx35_add_nand(&nand_info);
- add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX35_CS0_BASE_ADDR, 64 * 1024 * 1024, 0);
-
- switch ((reg >> 25) & 0x3) {
- case 0x01: /* NAND is the source */
- devfs_create_partitions("nand0", f3s_nand0_partitions);
- break;
-
- case 0x00: /* NOR is the source */
- devfs_create_partitions("nor0", f3s_nor0_partitions);
- protect_file("/dev/env0", 1);
- break;
- }
-
- set_silicon_rev(imx_silicon_revision());
-
- i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- imx35_add_i2c0(NULL);
-
- imx35_add_fec(&fec_info);
- add_generic_device("smc911x", DEVICE_ID_DYNAMIC, NULL, MX35_CS5_BASE_ADDR, MX35_CS5_SIZE,
- IORESOURCE_MEM, NULL);
-
- imx35_add_mmc0(NULL);
-
- imx35_add_fb(&ipu_fb_data);
-
- armlinux_set_architecture(MACH_TYPE_MX35_3DS);
-
- if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
- defaultenv_append_directory(defaultenv_freescale_mx35_3ds);
-
- return 0;
-}
-
-device_initcall(f3s_devices_init);
-
-static int f3s_enable_display(void)
-{
- /* Enable power to the LCD. (bit 6 hi.) */
- mc9sdz60_set_bits(mc9sdz60_get(), MC9SDZ60_REG_GPIO_1, 0x40, 0x40);
-
- return 0;
-}
-
-late_initcall(f3s_enable_display);
-
-static iomux_v3_cfg_t f3s_pads[] = {
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-
- MX35_PAD_RXD1__UART1_RXD_MUX,
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RTS1__UART1_RTS,
- MX35_PAD_CTS1__UART1_CTS,
-
- MX35_PAD_I2C1_CLK__I2C1_SCL,
- MX35_PAD_I2C1_DAT__I2C1_SDA,
-
- MX35_PAD_WDOG_RST__GPIO1_6,
- MX35_PAD_COMPARE__GPIO1_5,
-
- /* Display */
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
- MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
- MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
- MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
- MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
- MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-};
-
-static int f3s_console_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(f3s_pads, ARRAY_SIZE(f3s_pads));
-
- barebox_set_model("Freescale i.MX35 3DS");
- barebox_set_hostname("mx35-3stack");
-
- imx35_add_uart0();
- return 0;
-}
-
-console_initcall(f3s_console_init);
-
-static int f3s_core_init(void)
-{
- u32 reg;
-
- /* CS5: smc9117 */
- imx35_setup_weimcs(5, 0x0000D843, 0x22252521, 0x22220A00);
-
- /* enable clock for I2C1 and FEC */
- reg = readl(MX35_CCM_BASE_ADDR + MX35_CCM_CGR1);
- reg |= 0x3 << MX35_CCM_CGR1_FEC_SHIFT;
- reg |= 0x3 << MX35_CCM_CGR1_I2C1_SHIFT;
- reg = writel(reg, MX35_CCM_BASE_ADDR + MX35_CCM_CGR1);
-
- /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.*/
- /*
- * Set all MPROTx to be non-bufferable, trusted for R/W,
- * not forced to user-mode.
- */
- writel(0x77777777, MX35_AIPS1_BASE_ADDR);
- writel(0x77777777, MX35_AIPS1_BASE_ADDR + 0x4);
- writel(0x77777777, MX35_AIPS2_BASE_ADDR);
- writel(0x77777777, MX35_AIPS2_BASE_ADDR + 0x4);
-
- /*
- * Clear the on and off peripheral modules Supervisor Protect bit
- * for SDMA to access them. Did not change the AIPS control registers
- * (offset 0x20) access type
- */
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x40);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x44);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x48);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x4C);
- reg = readl(MX35_AIPS1_BASE_ADDR + 0x50);
- reg &= 0x00FFFFFF;
- writel(reg, MX35_AIPS1_BASE_ADDR + 0x50);
-
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x40);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x44);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x48);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x4C);
- reg = readl(MX35_AIPS2_BASE_ADDR + 0x50);
- reg &= 0x00FFFFFF;
- writel(reg, MX35_AIPS2_BASE_ADDR + 0x50);
-
- /* MAX (Multi-Layer AHB Crossbar Switch) setup */
-
- /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-#define MAX_PARAM1 0x00302154
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x000); /* for S0 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x100); /* for S1 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x200); /* for S2 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x300); /* for S3 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x400); /* for S4 */
-
- /* SGPCR - always park on last master */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x10); /* for S0 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x110); /* for S1 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x210); /* for S2 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x310); /* for S3 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x410); /* for S4 */
-
- /* MGPCR - restore default values */
- writel(0x0, MX35_MAX_BASE_ADDR + 0x800); /* for M0 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0x900); /* for M1 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xa00); /* for M2 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xb00); /* for M3 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xc00); /* for M4 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xd00); /* for M5 */
-
- return 0;
-}
-
-core_initcall(f3s_core_init);
-
-static int f3s_get_rev(struct mc13xxx *mc13xxx)
-{
- u32 rev;
- int err;
-
- err = mc13xxx_reg_read(mc13xxx, MC13XXX_REG_IDENTIFICATION, &rev);
- if (err)
- return err;
-
- if (rev == 0x00ffffff)
- return -ENODEV;
-
- return ((rev >> 6) & 0x7) ? MX35PDK_BOARD_REV_2 : MX35PDK_BOARD_REV_1;
-}
-
-static int f3s_pmic_init_v2(struct mc13xxx *mc13xxx)
-{
- int err = 0;
-
- /* COMPARE pin (GPIO1_5) as output and set high */
- gpio_direction_output( 32*0 + 5 , 1);
-
- err |= mc13xxx_set_bits(mc13xxx, MC13892_REG_SETTING_0, 0x03, 0x03);
- err |= mc13xxx_set_bits(mc13xxx, MC13892_REG_MODE_0, 0x01, 0x01);
- if (err)
- printf("mc13892 Init sequence failed, the system might not be working!\n");
-
- return err;
-}
-
-static int f3s_pmic_init_all(struct mc9sdz60 *mc9sdz60)
-{
- int err = 0;
-
- err |= mc9sdz60_set_bits(mc9sdz60, MC9SDZ60_REG_GPIO_1, 0x04, 0x04);
-
- err |= mc9sdz60_set_bits(mc9sdz60, MC9SDZ60_REG_RESET_1, 0x80, 0x00);
- mdelay(200);
- err |= mc9sdz60_set_bits(mc9sdz60, MC9SDZ60_REG_RESET_1, 0x80, 0x80);
-
- if (err)
- dev_err(&mc9sdz60->client->dev,
- "Init sequence failed, the system might not be working!\n");
-
- return err;
-}
-
-static int f3s_pmic_init(void)
-{
- struct mc13xxx *mc13xxx;
- struct mc9sdz60 *mc9sdz60;
- int rev;
-
- mc13xxx = mc13xxx_get();
- if (!mc13xxx) {
- printf("FAILED to get PMIC handle!\n");
- return 0;
- }
-
- rev = f3s_get_rev(mc13xxx);
- switch (rev) {
- case MX35PDK_BOARD_REV_1:
- break;
- case MX35PDK_BOARD_REV_2:
- f3s_pmic_init_v2(mc13xxx);
- break;
- default:
- printf("FAILED to identify board revision!\n");
- return 0;
- }
-
- set_board_rev(rev);
- printf("i.MX35 PDK CPU board version %d.\n", rev );
-
- mc9sdz60 = mc9sdz60_get();
- if (!mc9sdz60) {
- printf("FAILED to get mc9sdz60 handle!\n");
- return 0;
- }
-
- f3s_pmic_init_all(mc9sdz60);
-
- armlinux_set_revision(imx35_3ds_system_rev);
-
- return 0;
-}
-
-late_initcall(f3s_pmic_init);
diff --git a/arch/arm/boards/freescale-mx35-3ds/Makefile b/arch/arm/boards/freescale-mx35-3ds/Makefile
deleted file mode 100644
index e33babb4b3..0000000000
--- a/arch/arm/boards/freescale-mx35-3ds/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-obj-y += 3stack.o
-lwl-y += lowlevel_init.o
-bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-freescale-mx35-3ds
diff --git a/arch/arm/boards/freescale-mx35-3ds/board-mx35_3stack.h b/arch/arm/boards/freescale-mx35-3ds/board-mx35_3stack.h
deleted file mode 100644
index 9d0d492062..0000000000
--- a/arch/arm/boards/freescale-mx35-3ds/board-mx35_3stack.h
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-// SPDX-FileCopyrightText: 2008 Freescale Semiconductor, Inc.
-
-#ifndef __BOARD_MX35_3STACK_H
-#define __BOARD_MX35_3STACK_H
-
-#define UNALIGNED_ACCESS_ENABLE
-#define LOW_INT_LATENCY_ENABLE
-#define BRANCH_PREDICTION_ENABLE
-
-#define L2CC_AUX_CTL_CONFIG 0x00030024
-
-#define AIPS_MPR_CONFIG 0x77777777
-#define AIPS_OPACR_CONFIG 0x00000000
-
-/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-#define MAX_MPR_CONFIG 0x00302154
-/* SGPCR - always park on last master */
-#define MAX_SGPCR_CONFIG 0x00000010
-/* MGPCR - restore default values */
-#define MAX_MGPCR_CONFIG 0x00000000
-
-/*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
- * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
- * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
- * ------------
- * 0x00000040
- */
-#define M3IF_CONFIG 0x00000040
-
-#define DBG_BASE_ADDR WEIM_CTRL_CS5
-#define DBG_CSCR_U_CONFIG 0x0000D843
-#define DBG_CSCR_L_CONFIG 0x22252521
-#define DBG_CSCR_A_CONFIG 0x22220A00
-
-#define CCM_CCMR_CONFIG 0x003F4208
-#define CCM_PDR0_CONFIG 0x00821000
-
-#define PLL_BRM_OFFSET 31
-#define PLL_PD_OFFSET 26
-#define PLL_MFD_OFFSET 16
-#define PLL_MFI_OFFSET 10
-
-#define _PLL_BRM(x) ((x) << PLL_BRM_OFFSET)
-#define _PLL_PD(x) (((x) - 1) << PLL_PD_OFFSET)
-#define _PLL_MFD(x) (((x) - 1) << PLL_MFD_OFFSET)
-#define _PLL_MFI(x) ((x) << PLL_MFI_OFFSET)
-#define _PLL_MFN(x) (x)
-#define _PLL_SETTING(brm, pd, mfd, mfi, mfn) \
- (_PLL_BRM(brm) | _PLL_PD(pd) | _PLL_MFD(mfd) | _PLL_MFI(mfi) |\
- _PLL_MFN(mfn))
-
-#define CCM_MPLL_532_HZ _PLL_SETTING(1, 1, 12, 11, 1)
-#define CCM_MPLL_399_HZ _PLL_SETTING(0, 1, 16, 8, 5)
-#define CCM_PPLL_300_HZ _PLL_SETTING(0, 1, 4, 6, 1)
-
-/*MEMORY SETING*/
-#define ESDCTL_0x92220000 0x92220000
-#define ESDCTL_0xA2220000 0xA2220000
-#define ESDCTL_0xB2220000 0xB2220000
-#define ESDCTL_0x82228080 0x82228080
-
-#define ESDCTL_PRECHARGE 0x00000400
-
-#define ESDCTL_MDDR_CONFIG 0x007FFC3F
-#define ESDCTL_MDDR_MR 0x00000033
-#define ESDCTL_MDDR_EMR 0x02000000
-
-#define ESDCTL_DDR2_CONFIG 0x007FFC3F
-#define ESDCTL_DDR2_EMR2 0x04000000
-#define ESDCTL_DDR2_EMR3 0x06000000
-#define ESDCTL_DDR2_EN_DLL 0x02000400
-#define ESDCTL_DDR2_RESET_DLL 0x00000333
-#define ESDCTL_DDR2_MR 0x00000233
-#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780
-
-#define ESDCTL_DELAY_LINE5 0x00F49F00
-#endif /* __BOARD_MX35_3STACK_H */
diff --git a/arch/arm/boards/freescale-mx35-3ds/defaultenv-freescale-mx35-3ds/config b/arch/arm/boards/freescale-mx35-3ds/defaultenv-freescale-mx35-3ds/config
deleted file mode 100644
index af2fb6b2bc..0000000000
--- a/arch/arm/boards/freescale-mx35-3ds/defaultenv-freescale-mx35-3ds/config
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/sh
-
-eth0.serverip=
-user=
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp', 'nor' or 'nand'
-kernel_loc=tftp
-# can be either 'net', 'nor', 'nand' or 'initrd'
-rootfs_loc=net
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root-${global.hostname}.$rootfs_type
-
-kernelimage=zImage-${global.hostname}
-#kernelimage=uImage-${global.hostname}
-#kernelimage=Image-${global.hostname}
-#kernelimage=Image-${global.hostname}.lzo
-
-if [ -n $user ]; then
- kernelimage="$user"-"$kernelimage"
- nfsroot="$eth0.serverip:/home/$user/nfsroot/${global.hostname}"
- rootfsimage="$user"-"$rootfsimage"
-else
- nfsroot="$eth0.serverip:/path/to/nfs/root"
-fi
-
-autoboot_timeout=3
-
-bootargs="console=ttymxc0,115200"
-
-nor_parts="256k(barebox)ro,512k(bareboxenv),4M(kernel),-(root)"
-rootfs_mtdblock_nor=3
-
-nand_parts="256k(barebox)ro,512k(bareboxenv),4M(kernel),-(root)"
-rootfs_mtdblock_nand=7
-nand_device=mxc_nand
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
-
diff --git a/arch/arm/boards/freescale-mx35-3ds/flash-header.imxcfg b/arch/arm/boards/freescale-mx35-3ds/flash-header.imxcfg
deleted file mode 100644
index a6d16e8ab4..0000000000
--- a/arch/arm/boards/freescale-mx35-3ds/flash-header.imxcfg
+++ /dev/null
@@ -1,36 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-soc imx35
-loadaddr 0x80000000
-ivtofs 0x400
-
-wm 32 0xb8002050 0x0000d843
-wm 32 0xb8002054 0x22252521
-wm 32 0xb8002058 0x22220a00
-wm 32 0xb8001010 0x00000304
-wm 32 0xb8001010 0x0000030c
-wm 32 0xb8001004 0x007ffc3f
-wm 32 0xb800100c 0x007ffc3f
-wm 32 0xb8001000 0x92220000
-wm 32 0xb8001008 0x92220000
-wm 32 0x80000400 0x12345678
-wm 32 0x90000400 0x12345678
-wm 32 0xb8001000 0xa2220000
-wm 32 0xb8001008 0xa2220000
-wm 32 0x80000000 0x87654321
-wm 32 0x90000000 0x87654321
-wm 32 0x80000000 0x87654321
-wm 32 0x90000000 0x87654321
-wm 32 0xb8001000 0xb2220000
-wm 32 0xb8001008 0xb2220000
-wm 8 0x80000233 0xda
-wm 8 0x90000233 0xda
-wm 8 0x82000780 0xda
-wm 8 0x92000780 0xda
-wm 8 0x82000400 0xda
-wm 8 0x92000400 0xda
-wm 32 0xb8001000 0x82226080
-wm 32 0xb8001008 0x82226080
-wm 32 0xb8001004 0x007ffc3f
-wm 32 0xb800100c 0x007ffc3f
-wm 32 0xb8001010 0x00000304
diff --git a/arch/arm/boards/freescale-mx35-3ds/lowlevel_init.S b/arch/arm/boards/freescale-mx35-3ds/lowlevel_init.S
deleted file mode 100644
index fbc08d8fae..0000000000
--- a/arch/arm/boards/freescale-mx35-3ds/lowlevel_init.S
+++ /dev/null
@@ -1,241 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-
-#include <mach/imx35-regs.h>
-#include <mach/imx-pll.h>
-#include <mach/esdctl.h>
-#include <asm/cache-l2x0.h>
-#include <asm-generic/memory_layout.h>
-#include <asm/barebox-arm-head.h>
-
-#include "board-mx35_3stack.h"
-
-#define CSD0_BASE_ADDR 0x80000000
-#define CSD1_BASE_ADDR 0x90000000
-#define ESDCTL_BASE_ADDR 0xB8001000
-
-#define writel(val, reg) \
- ldr r0, =reg; \
- ldr r1, =val; \
- str r1, [r0];
-
-#define writeb(val, reg) \
- ldr r0, =reg; \
- ldr r1, =val; \
- strb r1, [r0];
-
- .section ".text_bare_init","ax"
-
-ARM_PPMRR: .word 0x40000015
-L2CACHE_PARAM: .word 0x00030024
-CCM_CCMR_W: .word 0x003F4208
-CCM_PDR0_W: .word 0x00001000
-MPCTL_PARAM_399_W: .word MPCTL_PARAM_399
-MPCTL_PARAM_532_W: .word MPCTL_PARAM_532
-PPCTL_PARAM_W: .word PPCTL_PARAM_300
-CCM_BASE_ADDR_W: .word MX35_CCM_BASE_ADDR
-
-.globl barebox_arm_reset_vector
-barebox_arm_reset_vector:
- bl arm_cpu_lowlevel_init
-
- /* Setup a temporary stack in internal SRAM */
- ldr sp, =MX35_IRAM_BASE_ADDR + MX35_IRAM_SIZE - 4
-
- mrc 15, 0, r1, c1, c0, 0
-
- mrc 15, 0, r0, c1, c0, 1
- orr r0, r0, #7
- mcr 15, 0, r0, c1, c0, 1
-
- orr r1, r1, #(1 << 11) /* Flow prediction (Z) */
- orr r1, r1, #(1 << 22) /* unaligned accesses */
- orr r1, r1, #(1 << 21) /* Low Int Latency */
-
- mcr 15, 0, r1, c1, c0, 0
-
- mov r0, #0
- mcr 15, 0, r0, c15, c2, 4
-
- /*
- * Branch predicition is now enabled. Flush the BTAC to ensure a valid
- * starting point. Don't flush BTAC while it is disabled to avoid
- * ARM1136 erratum 408023.
- */
- mov r0, #0
- mcr p15, 0, r0, c7, c5, 6 /* flush entire BTAC */
-
- mov r0, #0
- mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */
- mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */
- mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */
-
- /* Also setup the Peripheral Port Remap register inside the core */
- ldr r0, ARM_PPMRR /* start from AIPS 2GB region */
- mcr p15, 0, r0, c15, c2, 4
-
-/*
- * End of ARM1136 init
- */
- ldr r0, CCM_BASE_ADDR_W
-
- ldr r2, CCM_CCMR_W
- str r2, [r0, #MX35_CCM_CCMR]
-
- ldr r3, MPCTL_PARAM_532_W /* consumer path*/
-
- /* Set MPLL, arm clock and ahb clock */
- str r3, [r0, #MX35_CCM_MPCTL]
-
- ldr r1, PPCTL_PARAM_W
- str r1, [r0, #MX35_CCM_PPCTL]
-
- ldr r1, CCM_PDR0_W
- str r1, [r0, #MX35_CCM_PDR0]
-
- ldr r1, [r0, #MX35_CCM_CGR0]
- orr r1, r1, #0x00300000
- str r1, [r0, #MX35_CCM_CGR0]
-
- ldr r1, [r0, #MX35_CCM_CGR1]
- orr r1, r1, #0x00000C00
- orr r1, r1, #0x00000003
- str r1, [r0, #MX35_CCM_CGR1]
-
- /* Skip SDRAM initialization if we run from RAM */
- cmp pc, #CSD0_BASE_ADDR
- bls 1f
- cmp pc, #CSD1_BASE_ADDR
- bhi 1f
-
- b imx35_barebox_entry
-
-1:
- ldr r0, =ESDCTL_BASE_ADDR
- mov r3, #0x2000
- str r3, [r0, #0x0]
- str r3, [r0, #0x8]
-
- /* ip(r12) has used to save lr register in upper calling */
- mov fp, lr
-
- /* setup bank 0 */
- mov r5, #0x00
- mov r2, #0x00
- mov r1, #MX35_CSD0_BASE_ADDR
- bl setup_sdram_bank
-
- /* setup bank 1 */
- mov r5, #0x00
- mov r2, #0x00
- mov r1, #MX35_CSD1_BASE_ADDR
- bl setup_sdram_bank
-
- mov lr, fp
-
- ldr r3, =ESDCTL_DELAY_LINE5
- str r3, [r0, #0x30]
-
-#ifdef CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND
- mov r0, #0
- b imx35_barebox_boot_nand_external
-#endif /* CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND */
-
- b imx35_barebox_entry
-
-/*
- * r0: ESDCTL control base, r1: sdram slot base
- * r2: DDR type (0: DDR2, 1: MDDR) r3, r4: working base
- */
-setup_sdram_bank:
- mov r3, #0xE /* 0xA + 0x4 */
- tst r2, #0x1
- orreq r3, r3, #0x300 /* DDR2 */
- str r3, [r0, #0x10]
- bic r3, r3, #0x00A
- str r3, [r0, #0x10]
- beq 2f
-
- mov r3, #0x20000
-1: subs r3, r3, #1
- bne 1b
-
-2: tst r2, #0x1
- ldreq r3, =ESDCTL_DDR2_CONFIG
- ldrne r3, =ESDCTL_MDDR_CONFIG
- cmp r1, #CSD1_BASE_ADDR
- strlo r3, [r0, #0x4]
- strhs r3, [r0, #0xC]
-
- ldr r3, =ESDCTL_0x92220000
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
- mov r3, #0xDA
- ldr r4, =ESDCTL_PRECHARGE
- strb r3, [r1, r4]
-
- tst r2, #0x1
- bne skip_set_mode
-
- cmp r1, #CSD1_BASE_ADDR
- ldr r3, =ESDCTL_0xB2220000
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
- mov r3, #0xDA
- ldr r4, =ESDCTL_DDR2_EMR2
- strb r3, [r1, r4]
- ldr r4, =ESDCTL_DDR2_EMR3
- strb r3, [r1, r4]
- ldr r4, =ESDCTL_DDR2_EN_DLL
- strb r3, [r1, r4]
- ldr r4, =ESDCTL_DDR2_RESET_DLL
- strb r3, [r1, r4]
-
- ldr r3, =ESDCTL_0x92220000
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
- mov r3, #0xDA
- ldr r4, =ESDCTL_PRECHARGE
- strb r3, [r1, r4]
-
-skip_set_mode:
- cmp r1, #CSD1_BASE_ADDR
- ldr r3, =ESDCTL_0xA2220000
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
- mov r3, #0xDA
- strb r3, [r1]
- strb r3, [r1]
-
- ldr r3, =ESDCTL_0xB2220000
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
- tst r2, #0x1
- ldreq r4, =ESDCTL_DDR2_MR
- ldrne r4, =ESDCTL_MDDR_MR
- mov r3, #0xDA
- strb r3, [r1, r4]
- ldreq r4, =ESDCTL_DDR2_OCD_DEFAULT
- streqb r3, [r1, r4]
- ldreq r4, =ESDCTL_DDR2_EN_DLL
- ldrne r4, =ESDCTL_MDDR_EMR
- strb r3, [r1, r4]
-
- cmp r1, #CSD1_BASE_ADDR
- ldr r3, =ESDCTL_0x82228080
- strlo r3, [r0, #0x0]
- strhs r3, [r0, #0x8]
-
- tst r2, #0x1
- moveq r4, #0x20000
- movne r4, #0x200
-1: subs r4, r4, #1
- bne 1b
-
- str r3, [r1, #0x100]
- ldr r4, [r1, #0x100]
- cmp r3, r4
- movne r3, #1
- moveq r3, #0
-
- mov pc, lr
diff --git a/arch/arm/boards/freescale-mx53-smd/Makefile b/arch/arm/boards/freescale-mx53-smd/Makefile
deleted file mode 100644
index 9e7882a5db..0000000000
--- a/arch/arm/boards/freescale-mx53-smd/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-obj-y += board.o
-lwl-y += lowlevel.o
-bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-freescale-mx53-smd
diff --git a/arch/arm/boards/freescale-mx53-smd/board.c b/arch/arm/boards/freescale-mx53-smd/board.c
deleted file mode 100644
index ca3badf490..0000000000
--- a/arch/arm/boards/freescale-mx53-smd/board.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer, Pengutronix
-// SPDX-FileCopyrightText: 2011 Marc Kleine-Budde <mkl@pengutronix.de>
-
-#include <common.h>
-#include <environment.h>
-#include <fcntl.h>
-#include <platform_data/eth-fec.h>
-#include <fs.h>
-#include <init.h>
-#include <nand.h>
-#include <net.h>
-#include <linux/sizes.h>
-#include <gpio.h>
-#include <mci.h>
-#include <envfs.h>
-
-#include <generated/mach-types.h>
-
-#include <mach/imx53-regs.h>
-#include <mach/iomux-mx53.h>
-#include <mach/devices-imx53.h>
-#include <mach/generic.h>
-#include <mach/imx-nand.h>
-#include <mach/iim.h>
-#include <mach/imx5.h>
-
-#include <asm/armlinux.h>
-#include <io.h>
-#include <asm/mmu.h>
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_RMII,
-};
-
-static iomux_v3_cfg_t smd_pads[] = {
- /* UART1 */
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
- /* UART2 */
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-
- /* UART3 */
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
- MX53_PAD_PATA_DA_1__UART3_CTS,
- MX53_PAD_PATA_DA_2__UART3_RTS,
-
- /* FEC */
- MX53_PAD_FEC_MDC__FEC_MDC,
- MX53_PAD_FEC_MDIO__FEC_MDIO,
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
- MX53_PAD_FEC_RX_ER__FEC_RX_ER,
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
- MX53_PAD_FEC_RXD1__FEC_RDATA_1,
- MX53_PAD_FEC_RXD0__FEC_RDATA_0,
- MX53_PAD_FEC_TX_EN__FEC_TX_EN,
- MX53_PAD_FEC_TXD1__FEC_TDATA_1,
- MX53_PAD_FEC_TXD0__FEC_TDATA_0,
- /* FEC_nRST */
- MX53_PAD_PATA_DA_0__GPIO7_6,
-
- /* SD1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* SD1_CD */
- MX53_PAD_EIM_DA13__GPIO3_13,
- /* SD1_WP */
- MX53_PAD_KEY_ROW2__GPIO4_11,
-
- /* SD3 */
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
- MX53_PAD_PATA_IORDY__ESDHC3_CLK,
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-};
-
-#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-
-static void smd_fec_reset(void)
-{
- gpio_direction_output(SMD_FEC_PHY_RST, 0);
- mdelay(1);
- gpio_set_value(SMD_FEC_PHY_RST, 1);
-}
-
-#define LOCO_SD1_CD IMX_GPIO_NR(3, 13)
-#define LOCO_SD1_WP IMX_GPIO_NR(4, 11)
-
-static struct esdhc_platform_data loco_sd1_data = {
- .cd_gpio = LOCO_SD1_CD,
- .wp_gpio = LOCO_SD1_WP,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_GPIO,
- .caps = MMC_CAP_4_BIT_DATA,
-};
-
-static struct esdhc_platform_data loco_sd3_data = {
- .wp_type = ESDHC_WP_NONE,
- .cd_type = ESDHC_CD_PERMANENT,
-};
-
-static int smd_devices_init(void)
-{
- imx53_iim_register_fec_ethaddr();
- imx53_add_fec(&fec_info);
- imx53_add_mmc0(&loco_sd1_data);
- imx53_add_mmc2(&loco_sd3_data);
-
- smd_fec_reset();
-
- armlinux_set_architecture(MACH_TYPE_MX53_SMD);
-
- if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
- defaultenv_append_directory(defaultenv_freescale_mx53_smd);
-
- return 0;
-}
-device_initcall(smd_devices_init);
-
-static int smd_part_init(void)
-{
- devfs_add_partition("disk0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self0");
- devfs_add_partition("disk0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0");
-
- return 0;
-}
-late_initcall(smd_part_init);
-
-static int smd_console_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(smd_pads, ARRAY_SIZE(smd_pads));
-
- barebox_set_model("Freescale i.MX53 SMD");
- barebox_set_hostname("imx53-smd");
-
- imx53_init_lowlevel(1000);
-
- imx53_add_uart0();
- imx53_add_uart1();
- imx53_add_uart2();
- return 0;
-}
-console_initcall(smd_console_init);
diff --git a/arch/arm/boards/freescale-mx53-smd/defaultenv-freescale-mx53-smd/config b/arch/arm/boards/freescale-mx53-smd/defaultenv-freescale-mx53-smd/config
deleted file mode 100644
index 27d2663566..0000000000
--- a/arch/arm/boards/freescale-mx53-smd/defaultenv-freescale-mx53-smd/config
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-
-eth0.serverip=
-user=
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp', 'nor' or 'nand'
-kernel_loc=tftp
-# can be either 'net', 'nor', 'nand' or 'initrd'
-rootfs_loc=net
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root-${global.hostname}.$rootfs_type
-
-kernelimage=zImage-${global.hostname}
-#kernelimage=uImage-${global.hostname}
-#kernelimage=Image-${global.hostname}
-#kernelimage=Image-${global.hostname}.lzo
-
-if [ -n $user ]; then
- kernelimage="$user"-"$kernelimage"
- nfsroot="$eth0.serverip:/home/$user/nfsroot/${global.hostname}"
- rootfsimage="$user"-"$rootfsimage"
-else
- nfsroot="$eth0.serverip:/path/to/nfs/root"
-fi
-
-autoboot_timeout=3
-
-bootargs="console=ttymxc0,115200"
-
-disk_parts="256k(barebox)ro,128k(bareboxenv),4M(kernel),-(root)"
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
diff --git a/arch/arm/boards/freescale-mx53-smd/flash-header.imxcfg b/arch/arm/boards/freescale-mx53-smd/flash-header.imxcfg
deleted file mode 100644
index e885186c54..0000000000
--- a/arch/arm/boards/freescale-mx53-smd/flash-header.imxcfg
+++ /dev/null
@@ -1,56 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-loadaddr 0x70000000
-soc imx53
-ivtofs 0x400
-wm 32 0x53fa8554 0x00300000
-wm 32 0x53fa8558 0x00300040
-wm 32 0x53fa8560 0x00300000
-wm 32 0x53fa8564 0x00300040
-wm 32 0x53fa8568 0x00300040
-wm 32 0x53fa8570 0x00300000
-wm 32 0x53fa8574 0x00300000
-wm 32 0x53fa8578 0x00300000
-wm 32 0x53fa857c 0x00300040
-wm 32 0x53fa8580 0x00300040
-wm 32 0x53fa8584 0x00300000
-wm 32 0x53fa8588 0x00300000
-wm 32 0x53fa8590 0x00300040
-wm 32 0x53fa8594 0x00300000
-wm 32 0x53fa86f0 0x00300000
-wm 32 0x53fa86f4 0x00000000
-wm 32 0x53fa86fc 0x00000000
-wm 32 0x53fa8714 0x00000000
-wm 32 0x53fa8718 0x00300000
-wm 32 0x53fa871c 0x00300000
-wm 32 0x53fa8720 0x00300000
-wm 32 0x53fa8724 0x04000000
-wm 32 0x53fa8728 0x00300000
-wm 32 0x53fa872c 0x00300000
-wm 32 0x63fd9088 0x35343535
-wm 32 0x63fd9090 0x4d444c44
-wm 32 0x63fd907c 0x01370138
-wm 32 0x63fd9080 0x013b013c
-wm 32 0x63fd9018 0x00011740
-wm 32 0x63fd9000 0xc3190000
-wm 32 0x63fd900c 0x9f5152e3
-wm 32 0x63fd9010 0xb68e8a63
-wm 32 0x63fd9014 0x01ff00db
-wm 32 0x63fd902c 0x000026d2
-wm 32 0x63fd9030 0x009f0e21
-wm 32 0x63fd9008 0x12273030
-wm 32 0x63fd9004 0x0002002d
-wm 32 0x63fd901c 0x00008032
-wm 32 0x63fd901c 0x00008033
-wm 32 0x63fd901c 0x00028031
-wm 32 0x63fd901c 0x052080b0
-wm 32 0x63fd901c 0x04008040
-wm 32 0x63fd901c 0x0000803a
-wm 32 0x63fd901c 0x0000803b
-wm 32 0x63fd901c 0x00028039
-wm 32 0x63fd901c 0x05208138
-wm 32 0x63fd901c 0x04008048
-wm 32 0x63fd9020 0x00005800
-wm 32 0x63fd9040 0x04b80003
-wm 32 0x63fd9058 0x00022227
-wm 32 0x63fd901c 0x00000000
diff --git a/arch/arm/boards/freescale-mx53-smd/lowlevel.c b/arch/arm/boards/freescale-mx53-smd/lowlevel.c
deleted file mode 100644
index b15025ba18..0000000000
--- a/arch/arm/boards/freescale-mx53-smd/lowlevel.c
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <common.h>
-#include <mach/imx53-regs.h>
-#include <mach/esdctl.h>
-#include <mach/generic.h>
-#include <asm/barebox-arm-head.h>
-
-void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- imx5_cpu_lowlevel_init();
- arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE);
- imx53_barebox_entry(NULL);
-}
diff --git a/arch/arm/boards/guf-cupid/Makefile b/arch/arm/boards/guf-cupid/Makefile
deleted file mode 100644
index 86a27f301d..0000000000
--- a/arch/arm/boards/guf-cupid/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Juergen Beisert <jbe@pengutronix.de>
-
-lwl-y += lowlevel.o
-obj-y += board.o
-bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-guf-cupid
diff --git a/arch/arm/boards/guf-cupid/board.c b/arch/arm/boards/guf-cupid/board.c
deleted file mode 100644
index 419b3e2464..0000000000
--- a/arch/arm/boards/guf-cupid/board.c
+++ /dev/null
@@ -1,339 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-// SPDX-FileCopyrightText: 2009 Juergen Beisert <kernel@pengutronix.de>, Pengutronix
-
-/* Board support for the Garz+Fricke Cupid board */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <driver.h>
-#include <environment.h>
-#include <fs.h>
-#include <envfs.h>
-#include <mach/imx35-regs.h>
-#include <asm/armlinux.h>
-#include <io.h>
-#include <gpio.h>
-#include <nand.h>
-#include <generated/mach-types.h>
-#include <mach/imx-nand.h>
-#include <platform_data/eth-fec.h>
-#include <fb.h>
-#include <asm/mmu.h>
-#include <mach/weim.h>
-#include <mach/imx-ipu-fb.h>
-#include <mach/imx-pll.h>
-#include <mach/iomux-mx35.h>
-#include <mach/devices-imx35.h>
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_MII,
-};
-
-struct imx_nand_platform_data nand_info = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static struct fb_videomode guf_cupid_fb_mode = {
- /* 800x480 @ 70 Hz */
- .name = "CPT CLAA070LC0JCT",
- .refresh = 70,
- .xres = 800,
- .yres = 480,
- .pixclock = 30761,
- .left_margin = 24,
- .right_margin = 47,
- .upper_margin = 5,
- .lower_margin = 3,
- .hsync_len = 24,
- .vsync_len = 3,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_CLK_INVERT |
- FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
-};
-
-#define GPIO_LCD_ENABLE (2 * 32 + 24)
-#define GPIO_LCD_BACKLIGHT (0 * 32 + 19)
-
-static void cupid_fb_enable(int enable)
-{
- if (enable) {
- gpio_direction_output(GPIO_LCD_ENABLE, 1);
- mdelay(100);
- gpio_direction_output(GPIO_LCD_BACKLIGHT, 1);
- } else {
- gpio_direction_output(GPIO_LCD_BACKLIGHT, 0);
- mdelay(100);
- gpio_direction_output(GPIO_LCD_ENABLE, 0);
- }
-}
-
-static struct imx_ipu_fb_platform_data ipu_fb_data = {
- .mode = &guf_cupid_fb_mode,
- .num_modes = 1,
- .bpp = 16,
- .enable = cupid_fb_enable,
-};
-
-static int cupid_mmu_init(void)
-{
- l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
-
- return 0;
-}
-postmmu_initcall(cupid_mmu_init);
-
-static int cupid_devices_init(void)
-{
- uint32_t reg;
-
- gpio_direction_output(GPIO_LCD_ENABLE, 0);
- gpio_direction_output(GPIO_LCD_BACKLIGHT, 0);
-
- reg = readl(MX35_CCM_BASE_ADDR + MX35_CCM_RCSR);
- /* some fuses provide us vital information about connected hardware */
- if (reg & 0x20000000)
- nand_info.width = 2; /* 16 bit */
- else
- nand_info.width = 1; /* 8 bit */
-
- imx35_add_fec(&fec_info);
- imx35_add_nand(&nand_info);
-
- devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
- dev_add_bb_dev("self_raw", "self0");
- devfs_add_partition("nand0", 0x40000, 0x80000, DEVFS_PARTITION_FIXED, "env_raw");
- dev_add_bb_dev("env_raw", "env0");
-
- imx35_add_fb(&ipu_fb_data);
- imx35_add_mmc0(NULL);
-
- armlinux_set_architecture(MACH_TYPE_GUF_CUPID);
-
- if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
- defaultenv_append_directory(defaultenv_guf_cupid);
-
- return 0;
-}
-
-device_initcall(cupid_devices_init);
-
-static iomux_v3_cfg_t cupid_pads[] = {
- /* UART1 */
- MX35_PAD_CTS1__UART1_CTS,
- MX35_PAD_RTS1__UART1_RTS,
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- /* UART2 */
- MX35_PAD_CTS2__UART2_CTS,
- MX35_PAD_RTS2__UART2_RTS,
- MX35_PAD_TXD2__UART2_TXD_MUX,
- MX35_PAD_RXD2__UART2_RXD_MUX,
- /* FEC */
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- /* I2C1 */
- MX35_PAD_I2C1_CLK__I2C1_SCL,
- MX35_PAD_I2C1_DAT__I2C1_SDA,
- /* Display */
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
- MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
- MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
- MX35_PAD_LD18__GPIO3_24, /* LCD enable */
- MX35_PAD_CSPI1_SS1__GPIO1_19, /* LCD backligtht PWM */
- /* USB Host*/
- MX35_PAD_MLB_CLK__GPIO3_3, /* USB Host PWR */
- MX35_PAD_MLB_DAT__GPIO3_4, /* USB Host Overcurrent */
- /* USB OTG */
- MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
- MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
- /* SSI */
- MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
- MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
- MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
- MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
- /* UCB1400 IRQ */
- MX35_PAD_ATA_INTRQ__GPIO2_29,
- /* Speaker On */
- MX35_PAD_LD20__GPIO3_26,
- /* LEDs */
- MX35_PAD_TX1__GPIO1_14,
- /* ESDHC1 */
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* ESDHC1 CD */
- MX35_PAD_ATA_DATA5__GPIO2_18,
- /* ESDHC1 WP */
- MX35_PAD_ATA_DATA6__GPIO2_19,
-};
-
-static int cupid_console_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(cupid_pads, ARRAY_SIZE(cupid_pads));
-
- barebox_set_model("Garz & Fricke CUPID");
- barebox_set_hostname("cupid");
-
- imx35_add_uart0();
-
- return 0;
-}
-
-console_initcall(cupid_console_init);
-
-static int cupid_core_setup(void)
-{
- u32 tmp;
-
- /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.*/
- /*
- * Set all MPROTx to be non-bufferable, trusted for R/W,
- * not forced to user-mode.
- */
- writel(0x77777777, MX35_AIPS1_BASE_ADDR);
- writel(0x77777777, MX35_AIPS1_BASE_ADDR + 0x4);
- writel(0x77777777, MX35_AIPS2_BASE_ADDR);
- writel(0x77777777, MX35_AIPS2_BASE_ADDR + 0x4);
-
- /*
- * Clear the on and off peripheral modules Supervisor Protect bit
- * for SDMA to access them. Did not change the AIPS control registers
- * (offset 0x20) access type
- */
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x40);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x44);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x48);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x4C);
- tmp = readl(MX35_AIPS1_BASE_ADDR + 0x50);
- tmp &= 0x00FFFFFF;
- writel(tmp, MX35_AIPS1_BASE_ADDR + 0x50);
-
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x40);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x44);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x48);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x4C);
- tmp = readl(MX35_AIPS2_BASE_ADDR + 0x50);
- tmp &= 0x00FFFFFF;
- writel(tmp, MX35_AIPS2_BASE_ADDR + 0x50);
-
- /* MAX (Multi-Layer AHB Crossbar Switch) setup */
-
- /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-#define MAX_PARAM1 0x00302154
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x0); /* for S0 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x100); /* for S1 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x200); /* for S2 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x300); /* for S3 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x400); /* for S4 */
-
- /* SGPCR - always park on last master */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x10); /* for S0 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x110); /* for S1 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x210); /* for S2 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x310); /* for S3 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x410); /* for S4 */
-
- /* MGPCR - restore default values */
- writel(0x0, MX35_MAX_BASE_ADDR + 0x800); /* for M0 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0x900); /* for M1 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xa00); /* for M2 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xb00); /* for M3 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xc00); /* for M4 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xd00); /* for M5 */
-
- /* CS0: NOR Flash */
- imx35_setup_weimcs(0, 0x0000DCF6, 0x444A4541, 0x44443302);
-
- /*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = MAX1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[3] = USB not on priority list (0 << 0) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
- * MRRP[5] = GPU not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
- * ------------
- * 0x00000040
- */
- writel(0x40, MX35_M3IF_BASE_ADDR);
-
- return 0;
-}
-
-core_initcall(cupid_core_setup);
-
-static int do_cpufreq(int argc, char *argv[])
-{
- unsigned long freq;
-
- if (argc != 2)
- return COMMAND_ERROR_USAGE;
-
- freq = simple_strtoul(argv[1], NULL, 0);
-
- switch (freq) {
- case 399:
- writel(MPCTL_PARAM_399, MX35_CCM_BASE_ADDR + MX35_CCM_MPCTL);
- break;
- case 532:
- writel(MPCTL_PARAM_532, MX35_CCM_BASE_ADDR + MX35_CCM_MPCTL);
- break;
- default:
- return COMMAND_ERROR_USAGE;
- }
-
- printf("Switched CPU frequency to %luMHz\n", freq);
-
- return 0;
-}
-
-BAREBOX_CMD_START(cpufreq)
- .cmd = do_cpufreq,
- BAREBOX_CMD_DESC("adjust CPU frequency")
- BAREBOX_CMD_OPTS("399|532")
- BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
-BAREBOX_CMD_END
diff --git a/arch/arm/boards/guf-cupid/defaultenv-guf-cupid/config b/arch/arm/boards/guf-cupid/defaultenv-guf-cupid/config
deleted file mode 100644
index dc289b39f2..0000000000
--- a/arch/arm/boards/guf-cupid/defaultenv-guf-cupid/config
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/sh
-
-eth0.serverip=
-user=
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp', 'nor' or 'nand'
-kernel_loc=tftp
-# can be either 'net', 'nor', 'nand' or 'initrd'
-rootfs_loc=net
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root-${global.hostname}.$rootfs_type
-
-kernelimage=zImage-${global.hostname}
-#kernelimage=uImage-${global.hostname}
-#kernelimage=Image-${global.hostname}
-#kernelimage=Image-${global.hostname}.lzo
-
-if [ -n $user ]; then
- kernelimage="$user"-"$kernelimage"
- nfsroot="$eth0.serverip:/home/$user/nfsroot/${global.hostname}"
- rootfsimage="$user"-"$rootfsimage"
-else
- nfsroot="$eth0.serverip:/path/to/nfs/root"
-fi
-
-autoboot_timeout=3
-
-bootargs="console=ttymxc0,115200"
-
-bootargs="$bootargs video=mx3fb:CTP-CLAA070LC0ACW"
-
-nand_parts="256k(barebox)ro,512k(bareboxenv),2M(kernel),-(root)"
-nand_device=mxc_nand
-rootfs_mtdblock_nand=3
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
-
diff --git a/arch/arm/boards/guf-cupid/lowlevel.c b/arch/arm/boards/guf-cupid/lowlevel.c
deleted file mode 100644
index 6b6590f5d8..0000000000
--- a/arch/arm/boards/guf-cupid/lowlevel.c
+++ /dev/null
@@ -1,301 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-
-#include <common.h>
-#include <init.h>
-#include <mach/imx35-regs.h>
-#include <mach/imx-pll.h>
-#include <mach/esdctl.h>
-#include <asm/cache-l2x0.h>
-#include <io.h>
-#include <mach/imx-nand.h>
-#include <asm/barebox-arm.h>
-#include <asm/barebox-arm-head.h>
-#include <asm/sections.h>
-#include <asm-generic/memory_layout.h>
-#include <asm/system.h>
-
-#define SDRAM_MODE_BL_8 0x0003
-#define SDRAM_MODE_BSEQ 0x0000
-#define SDRAM_MODE_CL_3 0x0030
-#define MDDR_DS_HALF 0x20
-#define SDRAM_COMPARE_CONST1 0x55555555
-#define SDRAM_COMPARE_CONST2 0xaaaaaaaa
-
-static void __bare_init noinline setup_sdram(u32 memsize, u32 mode, u32 sdram_addr)
-{
- volatile int loop;
- void *r9 = (void *)MX35_CSD0_BASE_ADDR;
- u32 r11 = 0xda; /* dummy constant */
- u32 r1, r0;
-
- /* disable second SDRAM region to save power */
- r1 = readl(MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL1);
- r1 &= ~ESDCTL0_SDE;
- writel(r1, MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL1);
-
- mode |= ESDMISC_RST | ESDMISC_MDDR_DL_RST;
- writel(mode, MX35_ESDCTL_BASE_ADDR + IMX_ESDMISC);
-
- mode &= ~(ESDMISC_RST | ESDMISC_MDDR_DL_RST);
- writel(mode, MX35_ESDCTL_BASE_ADDR + IMX_ESDMISC);
-
- /* wait for esdctl reset */
- for (loop = 0; loop < 0x20000; loop++);
-
- r1 = ESDCFGx_tXP_4 | ESDCFGx_tWTR_1 |
- ESDCFGx_tRP_3 | ESDCFGx_tMRD_2 |
- ESDCFGx_tWR_1_2 | ESDCFGx_tRAS_6 |
- ESDCFGx_tRRD_2 | ESDCFGx_tCAS_3 |
- ESDCFGx_tRCD_3 | ESDCFGx_tRC_20;
-
- writel(r1, MX35_ESDCTL_BASE_ADDR + IMX_ESDCFG0);
-
- /* enable SDRAM controller */
- writel(memsize | ESDCTL0_SMODE_NORMAL,
- MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
-
- /* Micron Datasheet Initialization Step 3: Wait 200us before first command */
- for (loop = 0; loop < 1000; loop++);
-
- /* Micron Datasheet Initialization Step 4: PRE CHARGE ALL */
- writel(memsize | ESDCTL0_SMODE_PRECHARGE,
- MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(r11, sdram_addr);
-
- /* Micron Datasheet Initialization Step 5: NOP for tRP (at least 22.5ns)
- * The CPU is not fast enough to cause a problem here
- */
-
- /* Micron Datasheet Initialization Step 6: 2 AUTO REFRESH and tRFC NOP
- * (at least 140ns)
- */
- writel(memsize | ESDCTL0_SMODE_AUTO_REFRESH,
- MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(r11, r9); /* AUTO REFRESH #1 */
-
- for (loop = 0; loop < 3; loop++); /* ~140ns delay at 532MHz */
-
- writeb(r11, r9); /* AUTO REFRESH #2 */
-
- for (loop = 0; loop < 3; loop++); /* ~140ns delay at 532MHz */
-
- /* Micron Datasheet Initialization Step 7: LOAD MODE REGISTER */
- writel(memsize | ESDCTL0_SMODE_LOAD_MODE,
- MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(r11, r9 + (SDRAM_MODE_BL_8 | SDRAM_MODE_BSEQ | SDRAM_MODE_CL_3));
-
- /* Micron Datasheet Initialization Step 8: tMRD = 2 tCK NOP
- * (The memory controller will take care of this delay)
- */
-
- /* Micron Datasheet Initialization Step 9: LOAD MODE REGISTER EXTENDED */
- writeb(r11, 0x84000000 | MDDR_DS_HALF); /*we assume 14 Rows / 10 Cols here */
-
- /* Micron Datasheet Initialization Step 9: tMRD = 2 tCK NOP
- * (The memory controller will take care of this delay)
- */
-
- /* Now configure SDRAM-Controller and check that it works */
- writel(memsize | ESDCTL0_BL | ESDCTL0_REF4,
- MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
-
- /* Freescale asks for first access to be a write to properly
- * initialize DQS pin-state and keepers
- */
- writel(0xdeadbeef, r9);
-
- /* test that the RAM is in fact working */
- writel(SDRAM_COMPARE_CONST1, r9);
- writel(SDRAM_COMPARE_CONST2, r9 + 0x4);
-
- if (readl(r9) != SDRAM_COMPARE_CONST1)
- while (1);
-
- /* Verify that the correct row and coloumn is selected */
-
- /* So far we asssumed that we have 14 rows, verify this */
- writel(SDRAM_COMPARE_CONST1, r9);
- writel(SDRAM_COMPARE_CONST2, r9 + (1 << 25));
-
- /* if both value are identical, we don't have 14 rows. assume 13 instead */
- if (readl(r9) == readl(r9 + (1 << 25))) {
- r0 = readl(MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- r0 &= ~ESDCTL0_ROW_MASK;
- r0 |= ESDCTL0_ROW13;
- writel(r0, MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- }
-
- /* So far we asssumed that we have 10 columns, verify this */
- writel(SDRAM_COMPARE_CONST1, r9);
- writel(SDRAM_COMPARE_CONST2, r9 + (1 << 11));
-
- /* if both value are identical, we don't have 10 cols. assume 9 instead */
- if (readl(r9) == readl(r9 + (1 << 11))) {
- r0 = readl(MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- r0 &= ~ESDCTL0_COL_MASK;
- r0 |= ESDCTL0_COL9;
- writel(r0, MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- }
-}
-
-#define BRANCH_PREDICTION_ENABLE
-#define UNALIGNED_ACCESS_ENABLE
-#define LOW_INT_LATENCY_ENABLE
-
-void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- void *iomuxc_base = (void *)MX35_IOMUXC_BASE_ADDR;
- int i;
-
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(0x10000000 + 128 * 1024);
-
- /*
- * ARM1136 init
- * - invalidate I/D cache/TLB and drain write buffer;
- * - invalidate L2 cache
- * - unaligned access
- * - branch predictions
- */
-#ifdef TURN_OFF_IMPRECISE_ABORT
- __asm__ __volatile__("mrs %0, cpsr":"=r"(r0));
- r0 &= ~0x100;
- __asm__ __volatile__("msr cpsr, %0" : : "r"(r0));
-#endif
- /* ensure L1 caches and MMU are turned-off for now */
- r1 = get_cr();
- r1 &= ~(CR_I | CR_M | CR_C);
-
- /* setup core features */
- __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1":"=r"(r0));
-#ifdef BRANCH_PREDICTION_ENABLE
- r0 |= 7;
- r1 |= CR_Z;
-#else
- r0 &= ~7;
- r1 &= ~CR_Z;
-#endif
- __asm__ __volatile__("mcr p15, 0, r0, c1, c0, 1" : : "r"(r0));
-
-#ifdef UNALIGNED_ACCESS_ENABLE
- r1 |= CR_U;
-#else
- r1 &= ~CR_U;
-#endif
-
-#ifdef LOW_INT_LATENCY_ENABLE
- r1 |= CR_FI;
-#else
- r1 &= ~CR_FI;
-#endif
- set_cr(r1);
-
- r0 = 0;
- __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 6" : : "r"(r0));
-
- /* invalidate I cache and D cache */
- __asm__ __volatile__("mcr p15, 0, r0, c7, c7, 0" : : "r"(r0));
- /* invalidate TLBs */
- __asm__ __volatile__("mcr p15, 0, r0, c8, c7, 0" : : "r"(r0));
- /* Drain the write buffer */
- __asm__ __volatile__("mcr p15, 0, r0, c7, c10, 4" : : "r"(r0));
-
- /* Also setup the Peripheral Port Remap register inside the core */
- r0 = 0x40000015; /* start from AIPS 2GB region */
- __asm__ __volatile__("mcr p15, 0, r0, c15, c2, 4" : : "r"(r0));
-
-#define WDOG_WMCR 0x8
- /* silence reset WDOG */
- writew(0, MX35_WDOG_BASE_ADDR + WDOG_WMCR);
-
- /* Skip SDRAM initialization if we run from RAM */
- r0 = get_pc();
- if (r0 > 0x80000000 && r0 < 0x90000000)
- goto out;
-
- /* Configure drive strength */
-
- /* Configure DDR-pins to correct mode */
- r0 = 0x00001800;
- writel(r0, iomuxc_base + 0x794);
- writel(r0, iomuxc_base + 0x798);
- writel(r0, iomuxc_base + 0x79c);
- writel(r0, iomuxc_base + 0x7a0);
- writel(r0, iomuxc_base + 0x7a4);
-
- /* Set drive strength for DDR-pins */
- for (i = 0x368; i <= 0x4c8; i += 4) {
- r0 = readl(iomuxc_base + i);
- r0 &= ~0x6;
- r0 |= 0x2;
- writel(r0, iomuxc_base + i);
- if (i == 0x468)
- i = 0x4a4;
- }
-
- r0 = readl(iomuxc_base + 0x480);
- r0 &= ~0x6;
- r0 |= 0x2;
- writel(r0, iomuxc_base + 0x480);
-
- r0 = readl(iomuxc_base + 0x4b8);
- r0 &= ~0x6;
- r0 |= 0x2;
- writel(r0, iomuxc_base + 0x4b8);
-
- /* Configure static chip-selects */
- r0 = readl(iomuxc_base + 0x000);
- r0 &= ~1; /* configure CS2/CSD0 for SDRAM */
- writel(r0, iomuxc_base + 0x000);
-
- /* start-up code doesn't need any static chip-select.
- * Leave their initialization to high-level code that
- * can initialize them depending on the baseboard.
- */
-
- /* Configure clocks */
-
- /* setup cpu/bus clocks */
- writel(0x003f4208, MX35_CCM_BASE_ADDR + MX35_CCM_CCMR);
-
- /* configure MPLL */
- writel(MPCTL_PARAM_532, MX35_CCM_BASE_ADDR + MX35_CCM_MPCTL);
-
- /* configure PPLL */
- writel(PPCTL_PARAM_300, MX35_CCM_BASE_ADDR + MX35_CCM_PPCTL);
-
- /* configure core dividers */
- r0 = MX35_PDR0_CCM_PER_AHB(1) | MX35_PDR0_HSP_PODF(2);
-
- writel(r0, MX35_CCM_BASE_ADDR + MX35_CCM_PDR0);
-
- /* configure clock-gates */
- r0 = readl(MX35_CCM_BASE_ADDR + MX35_CCM_CGR0);
- r0 |= 0x3 << MX35_CCM_CGR0_EPIT1_SHIFT;
- writel(r0, MX35_CCM_BASE_ADDR + MX35_CCM_CGR0);
-
- r0 = readl(MX35_CCM_BASE_ADDR + MX35_CCM_CGR1);
- r0 |= 0x3 << MX35_CCM_CGR1_FEC_SHIFT;
- r0 |= 0x3 << MX35_CCM_CGR1_I2C1_SHIFT;
- writel(r0, MX35_CCM_BASE_ADDR + MX35_CCM_CGR1);
-
- /* Configure SDRAM */
- /* Try 32-Bit 256 MB DDR memory */
- r0 = ESDCTL0_SDE | ESDCTL0_ROW14 | ESDCTL0_COL10 | ESDCTL0_DSIZ_31_0; /* 1024 MBit DDR-SDRAM */
- setup_sdram(r0, ESDMISC_MDDR_EN, 0x80000f00);
-
- if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND)) {
- /* Speed up NAND controller by adjusting the NFC divider */
- r0 = readl(MX35_CCM_BASE_ADDR + MX35_CCM_PDR4);
- r0 &= ~(0xf << 28);
- r0 |= 0x1 << 28;
- writel(r0, MX35_CCM_BASE_ADDR + MX35_CCM_PDR4);
-
- imx35_barebox_boot_nand_external();
- }
-
-out:
- imx35_barebox_entry(NULL);
-}
diff --git a/arch/arm/boards/guf-neso/Makefile b/arch/arm/boards/guf-neso/Makefile
deleted file mode 100644
index 8d304e4afb..0000000000
--- a/arch/arm/boards/guf-neso/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-lwl-y += lowlevel.o
-obj-y += board.o
-obj-y += pll_init.o
-bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-guf-neso
diff --git a/arch/arm/boards/guf-neso/board.c b/arch/arm/boards/guf-neso/board.c
deleted file mode 100644
index 4a98592107..0000000000
--- a/arch/arm/boards/guf-neso/board.c
+++ /dev/null
@@ -1,318 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2010 Sascha Hauer, Pengutronix
-
-#include <common.h>
-#include <net.h>
-#include <init.h>
-#include <environment.h>
-#include <platform_data/eth-fec.h>
-#include <notifier.h>
-#include <gpio.h>
-#include <fs.h>
-#include <envfs.h>
-#include <fcntl.h>
-#include <nand.h>
-#include <command.h>
-#include <spi/spi.h>
-#include <usb/ulpi.h>
-
-#include <io.h>
-#include <asm/mmu.h>
-#include <asm/armlinux.h>
-#include <generated/mach-types.h>
-
-#include <mach/spi.h>
-#include <mach/imx27-regs.h>
-#include <mach/iomux-mx27.h>
-#include <mach/imx-nand.h>
-#include <mach/imx-pll.h>
-#include <platform_data/imxfb.h>
-#include <mach/devices-imx27.h>
-
-/* two pins are controlling the CS signals to the USB phys */
-#define USBH2_PHY_CS_GPIO (GPIO_PORTF + 20)
-#define OTG_PHY_CS_GPIO (GPIO_PORTF + 19)
-
-/* two pins are controlling the display and its backlight */
-#define LCD_POWER_GPIO (GPIO_PORTF + 18)
-#define BACKLIGHT_POWER_GPIO (GPIO_PORTE + 5)
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_MII,
- .phy_addr = 31,
-};
-
-static struct imx_nand_platform_data nand_info = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static struct fb_videomode imxfb_mode = {
- .name = "CPT CLAA070LC0JCT",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = KHZ2PICOS(27000),
- .hsync_len = 1, /* DE only sync */
- .left_margin = 50,
- .right_margin = 50,
- .vsync_len = 1, /* DE only sync */
- .upper_margin = 10,
- .lower_margin = 10,
-};
-
-static void neso_fb_enable(int enable)
-{
- gpio_direction_output(LCD_POWER_GPIO, enable);
- gpio_direction_output(BACKLIGHT_POWER_GPIO, enable);
-}
-
-static struct imx_fb_platform_data neso_fb_data = {
- .mode = &imxfb_mode,
- .num_modes = 1,
- .pwmr = 0x00000000, /* doesn't matter */
- .lscr1 = 0x00120300, /* doesn't matter */
- /* dynamic mode -> using the reset values (as recommended in the datasheet) */
- .dmacr = (0 << 31) | (4 << 16) | 96,
- .enable = neso_fb_enable,
- .framebuffer_ovl = (void *)0xa7f00000,
- /*
- * - TFT style panel
- * - clk enabled while idle
- * - clock inverted
- * - data not inverted
- * - data enable high active
- */
- .pcr = PCR_TFT |
- PCR_COLOR |
- PCR_PBSIZ_8 |
- PCR_BPIX_16 |
- PCR_CLKPOL |
- PCR_SCLK_SEL |
- PCR_LPPOL |
- PCR_FLMPOL,
- .bpp = 16, /* TODO 32 bit does not work: The 'green' component is lacking in this mode */
-};
-
-#if defined(CONFIG_USB) && defined(CONFIG_USB_ULPI)
-static void neso_usbh_init(void)
-{
- uint32_t temp;
-
- temp = readl(MX27_USB_OTG_BASE_ADDR + 0x600);
- temp &= ~((3 << 21) | 1);
- temp |= (1 << 5) | (1 << 16) | (1 << 19) | (1 << 20) | (1<<11);
- writel(temp, MX27_USB_OTG_BASE_ADDR + 0x600);
-
- temp = readl(MX27_USB_OTG_BASE_ADDR + 0x584);
- temp &= ~(3 << 30);
- temp |= 2 << 30;
- writel(temp, MX27_USB_OTG_BASE_ADDR + 0x584);
-
- mdelay(10);
-
- gpio_set_value(USBH2_PHY_CS_GPIO, 0);
- mdelay(10);
- ulpi_setup((void *)(MX27_USB_OTG_BASE_ADDR + 0x570), 1);
- add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC,
- MX27_USB_OTG_BASE_ADDR + 0x400, NULL);
-}
-#else
-static void neso_usbh_init(void) { }
-#endif
-
-static int neso_devices_init(void)
-{
- int i;
-
- unsigned int mode[] = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
-
- /* SSI1 connected in AC97 style */
- PC20_PF_SSI1_FS,
- PC21_PF_SSI1_RXD,
- PC22_PF_SSI1_TXD,
- PC23_PF_SSI1_CLK,
-
- /* LED 1 */
- (GPIO_PORTB | 15 | GPIO_GPIO | GPIO_OUT),
- /* LED 2 */
- (GPIO_PORTB | 16 | GPIO_GPIO | GPIO_OUT),
- /* CTOUCH reset */
- (GPIO_PORTB | 17 | GPIO_GPIO | GPIO_OUT),
- /* CTOUCH IRQ */
- (GPIO_PORTB | 14 | GPIO_GPIO | GPIO_IN),
- /* RTC IRQ */
- (GPIO_PORTF | 14 | GPIO_GPIO | GPIO_IN),
- /* SD change card detection */
- (GPIO_PORTF | 17 | GPIO_GPIO | GPIO_IN),
- /* SDHC1*/
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
- /* I2C1 */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- /* I2C2, for CTOUCH */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
-
- /* Connected to: Both USB phys and ethernet phy FIXME 1 = RESET? */
- PE17_PF_RESET_OUT,
-
- /* USB host */
- (USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT),
- PA0_PF_USBH2_CLK,
- PA1_PF_USBH2_DIR,
- PA3_PF_USBH2_NXT,
- PA4_PF_USBH2_STP,
- PD22_AF_USBH2_DATA0,
- PD24_AF_USBH2_DATA1,
- PD23_AF_USBH2_DATA2,
- PD20_AF_USBH2_DATA3,
- PD19_AF_USBH2_DATA4,
- PD26_AF_USBH2_DATA5,
- PD21_AF_USBH2_DATA6,
- PA2_PF_USBH2_DATA7,
-
- /* USB OTG */
- (OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT),
- PE24_PF_USBOTG_CLK,
- PE2_PF_USBOTG_DIR,
- PE0_PF_USBOTG_NXT,
- PE1_PF_USBOTG_STP,
- PC9_PF_USBOTG_DATA0,
- PC11_PF_USBOTG_DATA1,
- PC10_PF_USBOTG_DATA2,
- PC13_PF_USBOTG_DATA3,
- PC12_PF_USBOTG_DATA4,
- PC7_PF_USBOTG_DATA5,
- PC8_PF_USBOTG_DATA6,
- PE25_PF_USBOTG_DATA7,
-
- /* Display signals */
- (LCD_POWER_GPIO | GPIO_GPIO | GPIO_OUT), /* LCD power: 1 = LCD on */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA31_PF_OE_ACD, /* DE */
-
- /* Backlight PWM (Use as gpio) */
- (BACKLIGHT_POWER_GPIO | GPIO_GPIO | GPIO_OUT),
- };
-
- /* reset the chip select lines to the USB/OTG phys to avoid any hang */
- gpio_direction_output(OTG_PHY_CS_GPIO, 1);
- gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
-
- /* initialize gpios */
- for (i = 0; i < ARRAY_SIZE(mode); i++)
- imx27_gpio_mode(mode[i]);
-
- imx27_add_nand(&nand_info);
- imx27_add_fb(&neso_fb_data);
-
- neso_usbh_init();
-
- imx27_add_fec(&fec_info);
-
- devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
- dev_add_bb_dev("self_raw", "self0");
-
- devfs_add_partition("nand0", 0x40000, 0x80000, DEVFS_PARTITION_FIXED, "env_raw");
- dev_add_bb_dev("env_raw", "env0");
-
- armlinux_set_architecture(MACH_TYPE_NESO);
-
- if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
- defaultenv_append_directory(defaultenv_guf_neso);
-
- return 0;
-}
-
-device_initcall(neso_devices_init);
-
-static int neso_console_init(void)
-{
- barebox_set_model("Garz & Fricke NESO");
- barebox_set_hostname("neso");
-
- imx27_add_uart0();
-
- return 0;
-}
-
-console_initcall(neso_console_init);
-
-extern void *neso_pll_init, *neso_pll_init_end;
-
-static int neso_pll(void)
-{
- void *vram = (void *)0xffff4c00;
- void (*pllfunc)(void) = vram;
-
- printf("initialising PLLs\n");
-
- memcpy(vram, &neso_pll_init, 0x100);
-
- console_flush();
-
- pllfunc();
-
- /* clock gating enable */
- writel(0x00050f08, MX27_SYSCTRL_BASE_ADDR + MX27_GPCR);
-
- writel(0x130410c3, MX27_CCM_BASE_ADDR + MX27_PCDR0);
- writel(0x09030911, MX27_CCM_BASE_ADDR + MX27_PCDR1);
-
- /* Clocks have changed. Notify clients */
- clock_notifier_call_chain();
-
- return 0;
-}
-
-late_initcall(neso_pll);
-
diff --git a/arch/arm/boards/guf-neso/defaultenv-guf-neso/config b/arch/arm/boards/guf-neso/defaultenv-guf-neso/config
deleted file mode 100644
index bd44a555d9..0000000000
--- a/arch/arm/boards/guf-neso/defaultenv-guf-neso/config
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-
-eth0.serverip=
-user=
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp', 'nor' or 'nand'
-kernel_loc=tftp
-# can be either 'net', 'nor', 'nand' or 'initrd'
-rootfs_loc=net
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root-${global.hostname}.$rootfs_type
-
-kernelimage=zImage-${global.hostname}
-#kernelimage=uImage-${global.hostname}
-#kernelimage=Image-${global.hostname}
-#kernelimage=Image-${global.hostname}.lzo
-
-if [ -n $user ]; then
- kernelimage="$user"-"$kernelimage"
- nfsroot="$eth0.serverip:/home/$user/nfsroot/${global.hostname}"
- rootfsimage="$user"-"$rootfsimage"
-else
- nfsroot="$eth0.serverip:/path/to/nfs/root"
-fi
-
-autoboot_timeout=3
-
-bootargs="console=ttymxc0,115200"
-
-nand_parts="256k(barebox)ro,512k(bareboxenv),2M(kernel),-(root)"
-rootfs_mtdblock_nand=3
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
-
diff --git a/arch/arm/boards/guf-neso/lowlevel.c b/arch/arm/boards/guf-neso/lowlevel.c
deleted file mode 100644
index df91bc329f..0000000000
--- a/arch/arm/boards/guf-neso/lowlevel.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-
-#include <common.h>
-#include <init.h>
-#include <mach/imx27-regs.h>
-#include <mach/imx-pll.h>
-#include <mach/esdctl.h>
-#include <asm/cache-l2x0.h>
-#include <io.h>
-#include <mach/imx-nand.h>
-#include <asm/barebox-arm.h>
-#include <asm/barebox-arm-head.h>
-#include <asm/system.h>
-#include <asm/sections.h>
-#include <asm-generic/memory_layout.h>
-
-#define ESDCTL0_VAL (ESDCTL0_SDE | ESDCTL0_ROW13 | ESDCTL0_COL10)
-
-void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- uint32_t r;
- int i;
-
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE);
-
- /* ahb lite ip interface */
- writel(0x20040304, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR0);
- writel(0xDFFBFCFB, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR1);
- writel(0x00000000, MX27_AIPI_BASE_ADDR + MX27_AIPI2_PSR0);
- writel(0xFFFFFFFF, MX27_AIPI_BASE_ADDR + MX27_AIPI2_PSR1);
-
- /* Skip SDRAM initialization if we run from RAM */
- r = get_pc();
- if (r > 0xa0000000 && r < 0xb0000000)
- goto out;
-
- /*
- * DDR on CSD0
- */
- /* Enable DDR SDRAM operation */
- writel(0x00000008, MX27_ESDCTL_BASE_ADDR + IMX_ESDMISC);
-
- /* Set the driving strength */
- writel(0x55555555, MX27_SYSCTRL_BASE_ADDR + MX27_DSCR(3));
- writel(0x55555555, MX27_SYSCTRL_BASE_ADDR + MX27_DSCR(5));
- writel(0x55555555, MX27_SYSCTRL_BASE_ADDR + MX27_DSCR(6));
- writel(0x00005005, MX27_SYSCTRL_BASE_ADDR + MX27_DSCR(7));
- writel(0x15555555, MX27_SYSCTRL_BASE_ADDR + MX27_DSCR(8));
-
- /* Initial reset */
- writel(0x00000004, MX27_ESDCTL_BASE_ADDR + IMX_ESDMISC);
- writel(0x006ac73a, MX27_ESDCTL_BASE_ADDR + IMX_ESDCFG0);
-
- /* precharge CSD0 all banks */
- writel(ESDCTL0_VAL | ESDCTL0_SMODE_PRECHARGE,
- MX27_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writel(0x00000000, 0xA0000F00); /* CSD0 precharge address (A10 = 1) */
- writel(ESDCTL0_VAL | ESDCTL0_SMODE_AUTO_REFRESH,
- MX27_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
-
- for (i = 0; i < 8; i++)
- writel(0, 0xa0000f00);
-
- writel(ESDCTL0_VAL | ESDCTL0_SMODE_LOAD_MODE,
- MX27_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
-
- writeb(0xda, 0xa0000033);
- writeb(0xff, 0xa1000000);
- writel(ESDCTL0_VAL | ESDCTL0_DSIZ_31_0 | ESDCTL0_REF4 |
- ESDCTL0_BL | ESDCTL0_SMODE_NORMAL,
- MX27_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
-
- if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND))
- imx27_barebox_boot_nand_external();
-
-out:
- imx27_barebox_entry(NULL);
-}
diff --git a/arch/arm/boards/guf-neso/pll_init.S b/arch/arm/boards/guf-neso/pll_init.S
deleted file mode 100644
index fe28c457fc..0000000000
--- a/arch/arm/boards/guf-neso/pll_init.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <config.h>
-#include <mach/imx27-regs.h>
-#include <mach/imx-pll.h>
-#include <linux/linkage.h>
-
-#define writel(val, reg) \
- ldr r0, =reg; \
- ldr r1, =val; \
- str r1, [r0];
-
-#define CSCR_VAL MX27_CSCR_USB_DIV(3) | \
- MX27_CSCR_SD_CNT(3) | \
- MX27_CSCR_MSHC_SEL | \
- MX27_CSCR_H264_SEL | \
- MX27_CSCR_SSI1_SEL | \
- MX27_CSCR_SSI2_SEL | \
- MX27_CSCR_MCU_SEL | \
- MX27_CSCR_ARM_SRC_MPLL | \
- MX27_CSCR_SP_SEL | \
- MX27_CSCR_ARM_DIV(0) | \
- MX27_CSCR_FPM_EN | \
- MX27_CSCR_SPEN | \
- MX27_CSCR_MPEN | \
- MX27_CSCR_AHB_DIV(1)
-
-ENTRY(neso_pll_init)
-
- /* 399 MHz */
- writel(IMX_PLL_PD(0) |
- IMX_PLL_MFD(51) |
- IMX_PLL_MFI(7) |
- IMX_PLL_MFN(35), MX27_CCM_BASE_ADDR + MX27_MPCTL0)
-
- /* SPLL = 2 * 26 * 4.61538 MHz = 240 MHz */
- writel(IMX_PLL_PD(1) |
- IMX_PLL_MFD(12) |
- IMX_PLL_MFI(9) |
- IMX_PLL_MFN(3), MX27_CCM_BASE_ADDR + MX27_SPCTL0)
-
- writel(CSCR_VAL | MX27_CSCR_MPLL_RESTART | MX27_CSCR_SPLL_RESTART,
- MX27_CCM_BASE_ADDR + MX27_CSCR)
-
- ldr r2, =16000
-1:
- subs r2, r2, #1
- nop
- bcs 1b
-
- mov pc, lr
-ENDPROC(neso_pll_init)
-
diff --git a/arch/arm/boards/kindle3/Makefile b/arch/arm/boards/kindle3/Makefile
deleted file mode 100644
index 75a0ff560f..0000000000
--- a/arch/arm/boards/kindle3/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-obj-y += kindle3.o
-lwl-y += lowlevel.o
diff --git a/arch/arm/boards/kindle3/env/boot/mmc_kernel b/arch/arm/boards/kindle3/env/boot/mmc_kernel
deleted file mode 100644
index c6145b85ac..0000000000
--- a/arch/arm/boards/kindle3/env/boot/mmc_kernel
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-# Boot the Amazon factory-shipped kernel uimage stored on
-# the eMMC at MOVINAND_OFFSET_KERNEL=266240.
-
-global linux.bootargs.dyn.root="root=/dev/mmcblk0p1 ro"
-
-bootm -c -a 0x80008000 /dev/disk0.kernel
diff --git a/arch/arm/boards/kindle3/env/init/serials b/arch/arm/boards/kindle3/env/init/serials
deleted file mode 100644
index 76580aeece..0000000000
--- a/arch/arm/boards/kindle3/env/init/serials
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-
-global board.serial16
-global board.revision16
-
-# 16-byte alphanumeric containing the serial number
-# SN is the first 16 bytes before the bootloader
-if test -b /dev/disk0.serial; then
- if memcpy -s /dev/disk0.serial -d tmp_serial16 -b 0 0 16; then
- readf tmp_serial16 global.board.serial16
- fi
-fi
-[ -f tmp_serial16 ] && rm tmp_serial16
-
-# 16-byte alphanumeric containing the board revision
-if test -b /dev/disk0.imx_header; then
- if memcpy -s /dev/disk0.imx_header -d tmp_revision16 -b 2032 0 16; then
- readf tmp_revision16 global.board.revision16
- fi
-fi
-[ -f tmp_revision16 ] && rm tmp_revision16
diff --git a/arch/arm/boards/kindle3/env/init/usbconsole b/arch/arm/boards/kindle3/env/init/usbconsole
deleted file mode 100644
index 87a8f9bf8c..0000000000
--- a/arch/arm/boards/kindle3/env/init/usbconsole
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-# Fiveway device select key activates usbserial access for 60s
-echo
-if gpio_get_value 63; then
- usbserial
- global.autoboot_timeout=60
-fi
diff --git a/arch/arm/boards/kindle3/env/nv/autoboot_timeout b/arch/arm/boards/kindle3/env/nv/autoboot_timeout
deleted file mode 100644
index 00750edc07..0000000000
--- a/arch/arm/boards/kindle3/env/nv/autoboot_timeout
+++ /dev/null
@@ -1 +0,0 @@
-3
diff --git a/arch/arm/boards/kindle3/env/nv/boot.default b/arch/arm/boards/kindle3/env/nv/boot.default
deleted file mode 100644
index 3118b7af45..0000000000
--- a/arch/arm/boards/kindle3/env/nv/boot.default
+++ /dev/null
@@ -1 +0,0 @@
-mmc_kernel
diff --git a/arch/arm/boards/kindle3/env/nv/linux.bootargs.base b/arch/arm/boards/kindle3/env/nv/linux.bootargs.base
deleted file mode 100644
index 3a940d88fa..0000000000
--- a/arch/arm/boards/kindle3/env/nv/linux.bootargs.base
+++ /dev/null
@@ -1 +0,0 @@
-mem=256M ip=none
diff --git a/arch/arm/boards/kindle3/env/nv/linux.bootargs.console b/arch/arm/boards/kindle3/env/nv/linux.bootargs.console
deleted file mode 100644
index d775310b40..0000000000
--- a/arch/arm/boards/kindle3/env/nv/linux.bootargs.console
+++ /dev/null
@@ -1 +0,0 @@
-console=ttymxc0,115200
diff --git a/arch/arm/boards/kindle3/env/nv/linux.bootargs.lpj b/arch/arm/boards/kindle3/env/nv/linux.bootargs.lpj
deleted file mode 100644
index aa3ba59e55..0000000000
--- a/arch/arm/boards/kindle3/env/nv/linux.bootargs.lpj
+++ /dev/null
@@ -1 +0,0 @@
-lpj=2555904
diff --git a/arch/arm/boards/kindle3/flash-header.imxcfg b/arch/arm/boards/kindle3/flash-header.imxcfg
deleted file mode 100644
index 5ef09200ed..0000000000
--- a/arch/arm/boards/kindle3/flash-header.imxcfg
+++ /dev/null
@@ -1,26 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-soc imx35
-loadaddr 0x87eff400
-ivtofs 0x400
-
-wm 32 0x53f80004 0x00821000
-wm 32 0x53f80004 0x00821000
-wm 32 0xb8001010 0x00000002
-wm 32 0xb8001010 0x00000004
-wm 32 0xb8001004 0x0019672f
-wm 32 0xb8001000 0x93100000
-wm 8 0x80000400 0xda
-wm 32 0xb8001000 0xa3100000
-wm 32 0x80000000 0x12344321
-wm 32 0x80000000 0x12344321
-wm 32 0xb8001000 0xb3100000
-wm 8 0x80000033 0xda
-wm 8 0x82000000 0xff
-wm 32 0xb8001000 0x83226080
-wm 32 0xb8001010 0x0000000c
-wm 32 0x80000000 0xdeadbeef
-wm 32 0xb8001030 0x00e78000
-wm 32 0x43fac004 0x00000004
-wm 32 0x43fac328 0x00002100
-wm 32 0x43fac7d0 0x00000000
diff --git a/arch/arm/boards/kindle3/kindle3.c b/arch/arm/boards/kindle3/kindle3.c
deleted file mode 100644
index a593dc424d..0000000000
--- a/arch/arm/boards/kindle3/kindle3.c
+++ /dev/null
@@ -1,304 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-// SPDX-FileCopyrightText: 2016 Alexander Kurz <akurz@blala.de>
-
-/* Board support for the Amazon Kindle 3rd generation */
-
-#include <common.h>
-#include <command.h>
-#include <driver.h>
-#include <init.h>
-#include <bootsource.h>
-#include <io.h>
-#include <environment.h>
-#include <generated/mach-types.h>
-#include <asm/armlinux.h>
-#include <asm/mmu.h>
-#include <asm/setup.h>
-#include <mach/imx35-regs.h>
-#include <mach/imx-pll.h>
-#include <mach/iomux-mx35.h>
-#include <mach/devices-imx35.h>
-#include <mach/generic.h>
-#include <usb/fsl_usb2.h>
-#include <mach/usb.h>
-#include <mach/spi.h>
-#include <spi/spi.h>
-#include <magicvar.h>
-
-/* 16 byte id for serial number */
-#define ATAG_SERIAL16 0x5441000a
-/* 16 byte id for a board revision */
-#define ATAG_REVISION16 0x5441000b
-
-struct char16_tag {
- char data[16];
-};
-
-static struct tag *setup_16char_tag(struct tag *params, uint32_t tag,
- const char *value)
-{
- struct char16_tag *target;
- target = ((void *) params) + sizeof(struct tag_header);
- params->hdr.tag = tag;
- params->hdr.size = tag_size(char16_tag);
- memcpy(target->data, value, sizeof target->data);
- return tag_next(params);
-}
-
-static const char *get_env_16char_tag(const char *tag)
-{
- static const char *default16 = "0000000000000000";
- const char *value;
- value = getenv(tag);
- if (!value) {
- printf("env var %s not found, using default\n", tag);
- return default16;
- }
- if (strlen(value) != 16) {
- printf("env var %s: expecting 16 characters, using default\n",
- tag);
- return default16;
- }
- printf("%s: %s\n", tag, value);
- return value;
-}
-
-BAREBOX_MAGICVAR(global.board.serial16,
- "Pass the kindle Serial as vendor-specific ATAG to linux");
-BAREBOX_MAGICVAR(global.board.revision16,
- "Pass the kindle BoardId as vendor-specific ATAG to linux");
-
-/* The Kindle3 Kernel expects two custom ATAGs, ATAG_REVISION16 describing
- * the board and ATAG_SERIAL16 to identify the individual device.
- */
-static struct tag *kindle3_append_atags(struct tag *params)
-{
- params = setup_16char_tag(params, ATAG_SERIAL16,
- get_env_16char_tag("global.board.serial16"));
- params = setup_16char_tag(params, ATAG_REVISION16,
- get_env_16char_tag("global.board.revision16"));
- return params;
-}
-
-static struct fsl_usb2_platform_data kindle3_usb_info = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
-};
-
-/* SPI master devices. */
-static int kindle3_spi0_internal_chipselect[] = {
- IMX_GPIO_NR(1, 18),
-};
-
-static struct spi_imx_master kindle3_spi0_info = {
- .chipselect = kindle3_spi0_internal_chipselect,
- .num_chipselect = ARRAY_SIZE(kindle3_spi0_internal_chipselect),
-};
-
-static const struct spi_board_info kindle3_spi_board_info[] = {
- {
- .name = "mc13892",
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_CS_HIGH,
- },
-};
-
-static int kindle3_mmu_init(void)
-{
- l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
-
- return 0;
-}
-postmmu_initcall(kindle3_mmu_init);
-
-static int kindle3_devices_init(void)
-{
- imx35_add_mmc0(NULL);
-
- if (IS_ENABLED(CONFIG_USB_GADGET)) {
- unsigned int tmp;
- /* Workaround ENGcm09152 */
- tmp = readl(MX35_USB_OTG_BASE_ADDR + 0x608);
- writel(tmp | (1 << 23), MX35_USB_OTG_BASE_ADDR + 0x608);
- add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL,
- MX35_USB_OTG_BASE_ADDR, 0x200,
- IORESOURCE_MEM, &kindle3_usb_info);
- }
-
- /* The kindle3 related linux patch published by amazon bluntly
- * renamed MACH_MX35_3DS to MACH_MX35_LUIGI
- */
- armlinux_set_architecture(MACH_TYPE_MX35_3DS);
-
- /* Compatibility ATAGs for original kernel */
- armlinux_set_atag_appender(kindle3_append_atags);
- return 0;
-}
-device_initcall(kindle3_devices_init);
-
-#define FIVEWAY_PAD_CTL (PAD_CTL_PUS_100K_UP | PAD_CTL_HYS | PAD_CTL_DVS)
-static iomux_v3_cfg_t kindle3_pads[] = {
- /* UART1 */
- MX35_PAD_RXD1__UART1_RXD_MUX,
- MX35_PAD_TXD1__UART1_TXD_MUX,
-
- /* eMMC */
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-
- /* USB */
- MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
- MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
-
- /* I2C 1+2 */
- MX35_PAD_I2C1_CLK__I2C1_SCL,
- MX35_PAD_I2C1_DAT__I2C1_SDA,
- MX35_PAD_I2C2_CLK__I2C2_SCL,
- MX35_PAD_I2C2_DAT__I2C2_SDA,
-
- /* SPI */
- MX35_PAD_CSPI1_SS0__GPIO1_18,
- MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
- MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
- MX35_PAD_CSPI1_MISO__CSPI1_MISO,
- MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY,
-
- /* fiveway device: up, down, left, right, select */
- IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, FIVEWAY_PAD_CTL),
- IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, FIVEWAY_PAD_CTL),
- IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, FIVEWAY_PAD_CTL),
- IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, FIVEWAY_PAD_CTL),
- IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, FIVEWAY_PAD_CTL),
-
- /* Volume keys: up, down */
- MX35_PAD_SCKR__GPIO1_4,
- MX35_PAD_FSR__GPIO1_5,
-
-};
-
-static int kindle3_part_init(void)
-{
- devfs_add_partition("disk0", SZ_1K, 2 * SZ_1K,
- DEVFS_PARTITION_FIXED, "disk0.imx_header");
- devfs_add_partition("disk0", 4 * SZ_1K, (192 - 1) * SZ_1K,
- DEVFS_PARTITION_FIXED, "disk0.self");
- devfs_add_partition("disk0", (192 + 3) * SZ_1K, SZ_64K,
- DEVFS_PARTITION_FIXED, "env0");
- devfs_add_partition("disk0", (256 + 3) * SZ_1K, SZ_1K,
- DEVFS_PARTITION_FIXED, "disk0.serial");
- devfs_add_partition("disk0", (256 + 4) * SZ_1K, 3407872,
- DEVFS_PARTITION_FIXED, "disk0.kernel");
- devfs_add_partition("disk0", 3674112, SZ_256K,
- DEVFS_PARTITION_FIXED, "disk0.waveform");
- return 0;
-}
-
-late_initcall(kindle3_part_init);
-
-static int imx35_console_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(kindle3_pads,
- ARRAY_SIZE(kindle3_pads));
-
- barebox_set_model("Kindle3");
- barebox_set_hostname("kindle3");
-
- imx35_add_uart0();
-
- spi_register_board_info(kindle3_spi_board_info,
- ARRAY_SIZE(kindle3_spi_board_info));
- imx35_add_spi0(&kindle3_spi0_info);
-
- imx35_add_i2c0(NULL);
- imx35_add_i2c1(NULL);
- return 0;
-}
-console_initcall(imx35_console_init);
-
-static int kindle3_core_setup(void)
-{
- u32 tmp;
-
- /* AIPS setup - Only setup MPROTx registers.
- * The PACR default values are good.
- */
- /*
- * Set all MPROTx to be non-bufferable, trusted for R/W,
- * not forced to user-mode.
- */
- writel(0x77777777, MX35_AIPS1_BASE_ADDR);
- writel(0x77777777, MX35_AIPS1_BASE_ADDR + 0x4);
- writel(0x77777777, MX35_AIPS2_BASE_ADDR);
- writel(0x77777777, MX35_AIPS2_BASE_ADDR + 0x4);
-
- /*
- * Clear the on and off peripheral modules Supervisor Protect bit
- * for SDMA to access them. Did not change the AIPS control registers
- * (offset 0x20) access type
- */
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x40);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x44);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x48);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x4C);
- tmp = readl(MX35_AIPS1_BASE_ADDR + 0x50);
- tmp &= 0x00FFFFFF;
- writel(tmp, MX35_AIPS1_BASE_ADDR + 0x50);
-
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x40);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x44);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x48);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x4C);
- tmp = readl(MX35_AIPS2_BASE_ADDR + 0x50);
- tmp &= 0x00FFFFFF;
- writel(tmp, MX35_AIPS2_BASE_ADDR + 0x50);
-
- /* MAX (Multi-Layer AHB Crossbar Switch) setup */
-
- /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-#define MAX_PARAM1 0x00302154
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x0); /* for S0 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x100); /* for S1 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x200); /* for S2 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x300); /* for S3 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x400); /* for S4 */
-
- /* SGPCR - always park on last master */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x10); /* for S0 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x110); /* for S1 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x210); /* for S2 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x310); /* for S3 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x410); /* for S4 */
-
- /* MGPCR - restore default values */
- writel(0x0, MX35_MAX_BASE_ADDR + 0x800); /* for M0 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0x900); /* for M1 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xa00); /* for M2 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xb00); /* for M3 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xc00); /* for M4 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xd00); /* for M5 */
-
- /*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = MAX1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[3] = USB not on priority list (0 << 0) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
- * MRRP[5] = GPU not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
- * ------------
- * 0x00000040
- */
- writel(0x40, MX35_M3IF_BASE_ADDR);
-
- return 0;
-}
-
-core_initcall(kindle3_core_setup);
diff --git a/arch/arm/boards/kindle3/lowlevel.c b/arch/arm/boards/kindle3/lowlevel.c
deleted file mode 100644
index 251bcf9d42..0000000000
--- a/arch/arm/boards/kindle3/lowlevel.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-// SPDX-FileCopyrightText: 2016 Alexander Kurz <akurz@blala.de>
-
-#include <common.h>
-#include <init.h>
-#include <mach/imx35-regs.h>
-#include <mach/imx-pll.h>
-#include <mach/esdctl.h>
-#include <asm/cache-l2x0.h>
-#include <io.h>
-#include <mach/imx-nand.h>
-#include <asm/barebox-arm.h>
-#include <asm/barebox-arm-head.h>
-#include <asm/sections.h>
-#include <asm-generic/memory_layout.h>
-#include <asm/system.h>
-
-void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- uint32_t r, s;
- unsigned long ccm_base = MX35_CCM_BASE_ADDR;
- register uint32_t loops = 0x20000;
-
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(MX35_IRAM_BASE_ADDR + MX35_IRAM_SIZE);
-
- r = get_cr();
- r |= CR_Z; /* Flow prediction (Z) */
- r |= CR_U; /* unaligned accesses */
- r |= CR_FI; /* Low Int Latency */
-
- __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1" : "=r"(s));
- s |= 0x7;
- __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1" : : "r"(s));
-
- set_cr(r);
-
- r = 0;
- __asm__ __volatile__("mcr p15, 0, %0, c15, c2, 4" : : "r"(r));
-
- /*
- * Branch predicition is now enabled. Flush the BTAC to ensure a valid
- * starting point. Don't flush BTAC while it is disabled to avoid
- * ARM1136 erratum 408023.
- */
- __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 6" : : "r"(r));
-
- /* invalidate I cache and D cache */
- __asm__ __volatile__("mcr p15, 0, %0, c7, c7, 0" : : "r"(r));
-
- /* invalidate TLBs */
- __asm__ __volatile__("mcr p15, 0, %0, c8, c7, 0" : : "r"(r));
-
- /* Drain the write buffer */
- __asm__ __volatile__("mcr p15, 0, %0, c7, c10, 4" : : "r"(r));
-
- /* Also setup the Peripheral Port Remap register inside the core */
- r = 0x40000015; /* start from AIPS 2GB region */
- __asm__ __volatile__("mcr p15, 0, %0, c15, c2, 4" : : "r"(r));
-
- /*
- * End of ARM1136 init
- */
-
- writel(0x003F4208, ccm_base + MX35_CCM_CCMR);
-
- /* Set MPLL , arm clock and ahb clock*/
- writel(MPCTL_PARAM_532, ccm_base + MX35_CCM_MPCTL);
-
- writel(PPCTL_PARAM_300, ccm_base + MX35_CCM_PPCTL);
- writel(0x00001000, ccm_base + MX35_CCM_PDR0);
-
- r = readl(ccm_base + MX35_CCM_CGR0);
- r |= 0x3 << MX35_CCM_CGR0_CSPI1_SHIFT;
- r |= 0x3 << MX35_CCM_CGR0_EPIT1_SHIFT;
- r |= 0x3 << MX35_CCM_CGR0_ESDHC1_SHIFT;
- writel(r, ccm_base + MX35_CCM_CGR0);
-
- r = readl(ccm_base + MX35_CCM_CGR1);
- r |= 0x3 << MX35_CCM_CGR1_IOMUX_SHIFT;
- r |= 0x3 << MX35_CCM_CGR1_I2C1_SHIFT;
- r |= 0x3 << MX35_CCM_CGR1_I2C2_SHIFT;
- r |= 0x3 << MX35_CCM_CGR1_GPIO1_SHIFT;
- r |= 0x3 << MX35_CCM_CGR1_GPIO2_SHIFT;
- writel(r, ccm_base + MX35_CCM_CGR1);
-
- r = readl(MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL);
- r |= 0x1000;
- writel(r, MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL);
-
- /* Skip SDRAM initialization if we run from RAM */
- r = get_pc();
- if (r > 0x80000000 && r < 0x90000000)
- goto out;
-
- /* Init Mobile DDR */
- writel(0x0000000E, MX35_ESDCTL_BASE_ADDR + IMX_ESDMISC);
- /* ESD_MISC: Enable DDR SDRAM */
- writel(0x00000004, MX35_ESDCTL_BASE_ADDR + IMX_ESDMISC);
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b" : "=r" (loops) : "0" (loops));
-
- writel(0x0019672f, MX35_ESDCTL_BASE_ADDR + IMX_ESDCFG0);
- /* ESD_ESDCTL0 : select Prechare-All mode */
- writel(0x93220000, MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(0xda, MX35_CSD0_BASE_ADDR + 0x400);
- /* ESD_ESDCTL0: Auto Refresh command */
- writel(0xA3220000, MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(0xda, MX35_CSD0_BASE_ADDR);
- writeb(0xda, MX35_CSD0_BASE_ADDR);
- /* ESD_ESDCTL0: Load Mode Register */
- writel(0xB3220000, MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(0xda, MX35_CSD0_BASE_ADDR + 0x33);
- writeb(0xff, MX35_CSD0_BASE_ADDR + 0x2000000);
- /* ESD_ESDCTL0: enable Auto-Refresh */
- writel(0x83228080, MX35_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
-
- writel(0x0000000c, MX35_ESDCTL_BASE_ADDR + IMX_ESDMISC);
- writel(0xdeadbeef, MX35_CSD0_BASE_ADDR);
- writel(0x00e78000, MX35_CSD0_BASE_ADDR + 0x1030);
-
-out:
- imx35_barebox_entry(NULL);
-}
diff --git a/arch/arm/boards/phytec-phycore-imx31/Makefile b/arch/arm/boards/phytec-phycore-imx31/Makefile
deleted file mode 100644
index 1a5be8e81f..0000000000
--- a/arch/arm/boards/phytec-phycore-imx31/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Juergen Beisert <jbe@pengutronix.de>
-
-lwl-y += lowlevel.o
-obj-y += pcm037.o
diff --git a/arch/arm/boards/phytec-phycore-imx31/env/boot/nand-ubi b/arch/arm/boards/phytec-phycore-imx31/env/boot/nand-ubi
deleted file mode 100644
index d555a538d1..0000000000
--- a/arch/arm/boards/phytec-phycore-imx31/env/boot/nand-ubi
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-global.bootm.image="/dev/nand0.kernel.bb"
-#global.bootm.oftree="/env/oftree"
-global.linux.bootargs.dyn.root="root=ubi0:root ubi.mtd=nand0.root rootfstype=ubifs"
diff --git a/arch/arm/boards/phytec-phycore-imx31/env/init/mtdparts-nand b/arch/arm/boards/phytec-phycore-imx31/env/init/mtdparts-nand
deleted file mode 100644
index 540277cdeb..0000000000
--- a/arch/arm/boards/phytec-phycore-imx31/env/init/mtdparts-nand
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-mtdparts="512k(nand0.barebox)ro,128k(nand0.bareboxenv),4M(nand0.kernel),-(nand0.root)"
-kernelname="mxc_nand"
-
-mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/phytec-phycore-imx31/env/init/mtdparts-nor b/arch/arm/boards/phytec-phycore-imx31/env/init/mtdparts-nor
deleted file mode 100644
index 940eb86c95..0000000000
--- a/arch/arm/boards/phytec-phycore-imx31/env/init/mtdparts-nor
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-mtdparts="256k(nor0.barebox)ro,128k(nor0.bareboxenv),4M(nor0.kernel),-(nor0.root)"
-kernelname="physmap-flash.0"
-
-mtdparts-add -d nor0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/phytec-phycore-imx31/lowlevel.c b/arch/arm/boards/phytec-phycore-imx31/lowlevel.c
deleted file mode 100644
index 7e1c6efd3f..0000000000
--- a/arch/arm/boards/phytec-phycore-imx31/lowlevel.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-
-#include <common.h>
-#include <init.h>
-#include <io.h>
-#include <mach/imx-nand.h>
-#include <asm/barebox-arm.h>
-#include <asm/system.h>
-#include <asm-generic/memory_layout.h>
-#include <asm-generic/sections.h>
-#include <asm/barebox-arm-head.h>
-#include <mach/imx31-regs.h>
-#include <mach/imx-pll.h>
-#include <mach/esdctl.h>
-
-#define ESDCTL0_VAL (ESDCTL0_SDE | ESDCTL0_ROW13 | ESDCTL0_COL10)
-
-void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- uint32_t r;
- volatile int v;
-
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(MX31_IRAM_BASE_ADDR + MX31_IRAM_SIZE);
-
- writel(1 << 6, MX31_IPU_CTRL_BASE_ADDR);
-
- writel(0x074B0BF5, MX31_CCM_BASE_ADDR + MX31_CCM_CCMR);
-
- for (v = 0; v < 0x4000; v++);
-
- writel(0x074B0BF5 | MX31_CCMR_MPE, MX31_CCM_BASE_ADDR +
- MX31_CCM_CCMR);
- writel((0x074B0BF5 | MX31_CCMR_MPE) & ~MX31_CCMR_MDS,
- MX31_CCM_BASE_ADDR + MX31_CCM_CCMR);
-
- writel(MX31_PDR0_CSI_PODF(0xff1) | \
- MX31_PDR0_PER_PODF(7) | \
- MX31_PDR0_HSP_PODF(3) | \
- MX31_PDR0_NFC_PODF(5) | \
- MX31_PDR0_IPG_PODF(1) | \
- MX31_PDR0_MAX_PODF(3) | \
- MX31_PDR0_MCU_PODF(0), \
- MX31_CCM_BASE_ADDR + MX31_CCM_PDR0);
-
- writel(IMX_PLL_PD(0) | IMX_PLL_MFD(0xe) |
- IMX_PLL_MFI(9) | IMX_PLL_MFN(0xd),
- MX31_CCM_BASE_ADDR + MX31_CCM_MPCTL);
- writel(IMX_PLL_PD(1) | IMX_PLL_MFD(0x43) | IMX_PLL_MFI(12) |
- IMX_PLL_MFN(1), MX31_CCM_BASE_ADDR +
- MX31_CCM_SPCTL);
-
- /*
- * Configure IOMUXC
- * Clears 0x43fa_c26c - 0x43fa_c2dc with 0, except 0x43fa_c278 (untouched),
- * 0x43fa_c27c (set to 0x1000) and 0x43fa_c280 (untouched)
- * (behaviour copied by sha, source unknown)
- */
- writel(0, 0x43fac26c);
- writel(0, 0x43fac270);
- writel(0, 0x43fac274);
-
- writel(0x1000, 0x43fac27c);
-
- for (r = 0x43fac284; r <= 0x43fac2dc; r += 4)
- writel(0, r);
-
- /* Skip SDRAM initialization if we run from RAM */
- r = get_pc();
- if (r > 0x80000000 && r < 0xa0000000)
- imx31_barebox_entry(NULL);
-
-#if defined CONFIG_PCM037_SDRAM_BANK0_128MB
-#define ROWS0 ESDCTL0_ROW13
-#elif defined CONFIG_PCM037_SDRAM_BANK0_256MB
-#define ROWS0 ESDCTL0_ROW14
-#endif
- writel(0x00000004, MX31_ESDCTL_BASE_ADDR + IMX_ESDMISC);
- writel(0x006ac73a, MX31_ESDCTL_BASE_ADDR + IMX_ESDCFG0);
- writel(0x90100000 | ROWS0, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writel(0x12344321, MX31_CSD0_BASE_ADDR + 0xf00);
- writel(0xa0100000 | ROWS0, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writel(0x12344321, MX31_CSD0_BASE_ADDR);
- writel(0x12344321, MX31_CSD0_BASE_ADDR);
- writel(0xb0100000 | ROWS0, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writeb(0xda, MX31_CSD0_BASE_ADDR + 0x33);
- writeb(0xff, MX31_CSD0_BASE_ADDR + 0x01000000);
- writel(0x80226080 | ROWS0, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
- writel(0xDEADBEEF, MX31_CSD0_BASE_ADDR);
- writel(0x0000000c, MX31_ESDCTL_BASE_ADDR + IMX_ESDMISC);
-
-#ifndef CONFIG_PCM037_SDRAM_BANK1_NONE
-#if defined CONFIG_PCM037_SDRAM_BANK1_128MB
-#define ROWS1 ESDCTL0_ROW13
-#elif defined CONFIG_PCM037_SDRAM_BANK1_256MB
-#define ROWS1 ESDCTL0_ROW14
-#endif
- writel(0x006ac73a, MX31_ESDCTL_BASE_ADDR + IMX_ESDCFG1);
- writel(0x90100000 | ROWS1, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL1);
- writel(0x12344321, MX31_CSD1_BASE_ADDR + 0xf00);
- writel(0xa0100000 | ROWS1, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL1);
- writel(0x12344321, MX31_CSD1_BASE_ADDR);
- writel(0x12344321, MX31_CSD1_BASE_ADDR);
- writel(0xb0100000 | ROWS1, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL1);
- writeb(0xda, MX31_CSD1_BASE_ADDR + 0x33);
- writeb(0xff, MX31_CSD1_BASE_ADDR + 0x01000000);
- writel(0x80226080 | ROWS1, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL1);
- writel(0xDEADBEEF, MX31_CSD1_BASE_ADDR);
- writel(0x0000000c, MX31_ESDCTL_BASE_ADDR + IMX_ESDMISC);
-#endif
-
- if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND))
- imx31_barebox_boot_nand_external();
- else
- imx31_barebox_entry(NULL);
-}
diff --git a/arch/arm/boards/phytec-phycore-imx31/pcm037.c b/arch/arm/boards/phytec-phycore-imx31/pcm037.c
deleted file mode 100644
index a736919daf..0000000000
--- a/arch/arm/boards/phytec-phycore-imx31/pcm037.c
+++ /dev/null
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-
-/* Board support for Phytec's, i.MX31 based CPU card, called: PCM037 */
-
-#include <common.h>
-#include <init.h>
-#include <driver.h>
-#include <fs.h>
-#include <gpio.h>
-#include <environment.h>
-#include <usb/ulpi.h>
-#include <mach/imx31-regs.h>
-#include <mach/iomux-mx31.h>
-#include <asm/armlinux.h>
-#include <asm/sections.h>
-#include <mach/weim.h>
-#include <io.h>
-#include <platform_data/eth-smc911x.h>
-#include <asm/mmu.h>
-#include <generated/mach-types.h>
-#include <asm/barebox-arm.h>
-#include <mach/imx-nand.h>
-#include <mach/devices-imx31.h>
-
-struct imx_nand_platform_data nand_info = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-#ifdef CONFIG_USB
-static void pcm037_usb_init(void)
-{
- u32 tmp;
-
- /* enable clock */
- tmp = readl(0x53f80000);
- tmp |= (1 << 9);
- writel(tmp, 0x53f80000);
-
- /* Host 1 */
- tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x600);
- tmp &= ~((3 << 21) | 1);
- tmp |= (1 << 5) | (1 << 16) | (1 << 19) | (1 << 11) | (1 << 20);
- writel(tmp, MX31_USB_OTG_BASE_ADDR + 0x600);
-
- tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x184);
- tmp &= ~(3 << 30);
- tmp |= 2 << 30;
- writel(tmp, MX31_USB_OTG_BASE_ADDR + 0x184);
-
- imx_iomux_mode(MX31_PIN_USBOTG_DATA0__USBOTG_DATA0);
- imx_iomux_mode(MX31_PIN_USBOTG_DATA1__USBOTG_DATA1);
- imx_iomux_mode(MX31_PIN_USBOTG_DATA2__USBOTG_DATA2);
- imx_iomux_mode(MX31_PIN_USBOTG_DATA3__USBOTG_DATA3);
- imx_iomux_mode(MX31_PIN_USBOTG_DATA4__USBOTG_DATA4);
- imx_iomux_mode(MX31_PIN_USBOTG_DATA5__USBOTG_DATA5);
- imx_iomux_mode(MX31_PIN_USBOTG_DATA6__USBOTG_DATA6);
- imx_iomux_mode(MX31_PIN_USBOTG_DATA7__USBOTG_DATA7);
- imx_iomux_mode(MX31_PIN_USBOTG_CLK__USBOTG_CLK);
- imx_iomux_mode(MX31_PIN_USBOTG_DIR__USBOTG_DIR);
- imx_iomux_mode(MX31_PIN_USBOTG_NXT__USBOTG_NXT);
- imx_iomux_mode(MX31_PIN_USBOTG_STP__USBOTG_STP);
-
- mdelay(50);
- ulpi_setup((void *)(MX31_USB_OTG_BASE_ADDR + 0x170), 1);
-
- /* Host 2 */
- tmp = readl(MX31_IOMUXC_GPR);
- tmp |= 1 << 11; /* IOMUX GPR: enable USBH2 signals */
- writel(tmp, MX31_IOMUXC_GPR);
-
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC));
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC));
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC));
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC));
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC));
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC));
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC));
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC));
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC));
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC));
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC));
- imx_iomux_mode(IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC));
-
-#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
- imx_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
- imx_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
- imx_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
- imx_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
- imx_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
- imx_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
- imx_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */
- imx_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */
- imx_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */
- imx_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
- imx_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
- imx_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
-
- tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x600);
- tmp &= ~((3 << 21) | 1);
- tmp |= (1 << 5) | (1 << 16) | (1 << 19) | (1 << 20);
- writel(tmp, MX31_USB_OTG_BASE_ADDR + 0x600);
-
- tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x584);
- tmp &= ~(3 << 30);
- tmp |= 2 << 30;
- writel(tmp, MX31_USB_OTG_BASE_ADDR + 0x584);
-
- mdelay(50);
- ulpi_setup((void *)(MX31_USB_OTG_BASE_ADDR + 0x570), 1);
-
- /* Set to Host mode */
- tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x1a8);
- writel(tmp | 0x3, MX31_USB_OTG_BASE_ADDR + 0x1a8);
-
-}
-#endif
-
-static int pcm037_mmu_init(void)
-{
- l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
-
- return 0;
-}
-postmmu_initcall(pcm037_mmu_init);
-
-static struct smc911x_plat smsc9217_pdata = {
- .flags = SMC911X_FORCE_INTERNAL_PHY,
-};
-
-static int pcm037_devices_init(void)
-{
- /* CS0: Nor Flash */
- imx31_setup_weimcs(0, 0x0000cf03, 0x10000d03, 0x00720900);
- /* CS1: Network Controller */
- imx31_setup_weimcs(1, 0x0000df06, 0x444a4541, 0x44443302);
- /* CS4: SRAM */
- imx31_setup_weimcs(4, 0x0000d843, 0x22252521, 0x22220a00);
- /* CS5: SJA1000 */
- imx31_setup_weimcs(4, 0x0000DCF6, 0x444A0301, 0x44443302);
-
- /*
- * Up to 32MiB NOR type flash, connected to
- * CS line 0, data width is 16 bit
- */
- add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX31_CS0_BASE_ADDR, 32 * 1024 * 1024, 0);
-
- imx31_add_mmc0(NULL);
-
- /*
- * Create partitions that should be
- * not touched by any regular user
- */
- devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self0"); /* ourself */
- devfs_add_partition("nor0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0"); /* environment */
-
- protect_file("/dev/env0", 1);
-
- /*
- * up to 2MiB static RAM type memory, connected
- * to CS4, data width is 16 bit
- */
- add_mem_device("sram0", MX31_CS4_BASE_ADDR, MX31_CS4_SIZE, /* area size */
- IORESOURCE_MEM_WRITEABLE);
- imx31_add_nand(&nand_info);
-
- /*
- * SMSC 9217 network controller
- * connected to CS line 1 and interrupt line
- * GPIO3, data width is 16 bit
- */
- add_generic_device("smc911x", DEVICE_ID_DYNAMIC, NULL, MX31_CS1_BASE_ADDR,
- MX31_CS1_SIZE, IORESOURCE_MEM, &smsc9217_pdata);
-
-#ifdef CONFIG_USB
- pcm037_usb_init();
- add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX31_USB_OTG_BASE_ADDR, NULL);
- add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX31_USB_HS2_BASE_ADDR, NULL);
-#endif
- armlinux_set_architecture(MACH_TYPE_PCM037);
-
- return 0;
-}
-
-device_initcall(pcm037_devices_init);
-
-static unsigned int pcm037_iomux[] = {
- /* UART1 */
- MX31_PIN_RXD1__RXD1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- /* I2C */
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
- MX31_PIN_CSPI2_SS2__I2C3_SDA,
- MX31_PIN_CSPI2_SCLK__I2C3_SCL,
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
- IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
- /* SPI1 */
- MX31_PIN_CSPI1_MOSI__MOSI,
- MX31_PIN_CSPI1_MISO__MISO,
- MX31_PIN_CSPI1_SCLK__SCLK,
- MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI1_SS0__SS0,
- MX31_PIN_CSPI1_SS1__SS1,
- MX31_PIN_CSPI1_SS2__SS2,
- /* UART2 */
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- /* UART3 */
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3,
- MX31_PIN_CSPI3_SCLK__RTS3,
- MX31_PIN_CSPI3_SPI_RDY__CTS3,
-};
-
-static int imx31_console_init(void)
-{
- imx_iomux_setup_multiple_pins(pcm037_iomux, ARRAY_SIZE(pcm037_iomux));
-
- barebox_set_model("Phytec phyCORE-i.MX31");
- barebox_set_hostname("phycore-imx31");
-
- imx31_add_uart0();
- return 0;
-}
-
-console_initcall(imx31_console_init);
diff --git a/arch/arm/boards/phytec-phycore-imx35/Makefile b/arch/arm/boards/phytec-phycore-imx35/Makefile
deleted file mode 100644
index 5029714421..0000000000
--- a/arch/arm/boards/phytec-phycore-imx35/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Juergen Beisert <jbe@pengutronix.de>
-
-lwl-y += lowlevel.o
-obj-y += pcm043.o
diff --git a/arch/arm/boards/phytec-phycore-imx35/env/boot/nand-ubi b/arch/arm/boards/phytec-phycore-imx35/env/boot/nand-ubi
deleted file mode 100644
index d555a538d1..0000000000
--- a/arch/arm/boards/phytec-phycore-imx35/env/boot/nand-ubi
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-global.bootm.image="/dev/nand0.kernel.bb"
-#global.bootm.oftree="/env/oftree"
-global.linux.bootargs.dyn.root="root=ubi0:root ubi.mtd=nand0.root rootfstype=ubifs"
diff --git a/arch/arm/boards/phytec-phycore-imx35/env/init/mtdparts-nand b/arch/arm/boards/phytec-phycore-imx35/env/init/mtdparts-nand
deleted file mode 100644
index c7185db7f7..0000000000
--- a/arch/arm/boards/phytec-phycore-imx35/env/init/mtdparts-nand
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-mtdparts="512k(nand0.barebox),256k(nand0.bareboxenv),4M(nand0.kernel),-(nand0.root)"
-kernelname="mxc_nand"
-
-mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/phytec-phycore-imx35/env/init/mtdparts-nor b/arch/arm/boards/phytec-phycore-imx35/env/init/mtdparts-nor
deleted file mode 100644
index 09c3ba9842..0000000000
--- a/arch/arm/boards/phytec-phycore-imx35/env/init/mtdparts-nor
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-mtdparts="512k(nor0.barebox),128k(nor0.bareboxenv),4M(nor0.kernel),-(nor0.root)"
-kernelname="physmap-flash.0"
-
-mtdparts-add -d nor0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/phytec-phycore-imx35/flash-header.imxcfg b/arch/arm/boards/phytec-phycore-imx35/flash-header.imxcfg
deleted file mode 100644
index 3d690e9732..0000000000
--- a/arch/arm/boards/phytec-phycore-imx35/flash-header.imxcfg
+++ /dev/null
@@ -1,39 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-soc imx35
-ivtofs 0x400
-loadaddr 0x80000000
-wm 32 0x53f80004 0x00821000
-wm 32 0x53f80004 0x00821000
-
-wm 32 0x43fac794 0x00000800
-wm 32 0x43fac798 0x00000800
-wm 32 0x43fac79c 0x00000800
-wm 32 0x43fac7a0 0x00000800
-wm 32 0x43fac7a4 0x00000800
-
-wm 32 0xb8001010 0x00000304
-wm 32 0xb8001004 0x0025541f
-wm 32 0xb8001000 0x92220000
-wm 32 0x80000400 0x12345678
-
-wm 32 0xb8001000 0xb8001000
-wm 8 0x84000000 0xda
-wm 8 0x86000000 0xda
-wm 8 0x82000400 0xda
-wm 8 0x80000333 0xda
-
-wm 32 0xb8001000 0x92220000
-wm 32 0x80000400 0x12345678
-
-wm 32 0xb8001000 0xa2220000
-wm 32 0x80000000 0x12344321
-wm 32 0x80000000 0x12344321
-wm 32 0xb8001000 0xb2220000
-wm 8 0x80000233 0xda
-wm 8 0x82000780 0xda
-wm 8 0x82000400 0xda
-wm 32 0xb8001000 0x82220080
-wm 32 0xb8001000 0x82228080
-wm 32 0xb8001008 0x00002000
-
diff --git a/arch/arm/boards/phytec-phycore-imx35/lowlevel.c b/arch/arm/boards/phytec-phycore-imx35/lowlevel.c
deleted file mode 100644
index 73097eea10..0000000000
--- a/arch/arm/boards/phytec-phycore-imx35/lowlevel.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-
-#include <common.h>
-#include <init.h>
-#include <mach/imx35-regs.h>
-#include <mach/imx-pll.h>
-#include <mach/esdctl.h>
-#include <asm/cache-l2x0.h>
-#include <io.h>
-#include <mach/imx-nand.h>
-#include <asm/barebox-arm.h>
-#include <asm/barebox-arm-head.h>
-#include <asm/sections.h>
-#include <asm-generic/memory_layout.h>
-#include <asm/system.h>
-
-#define IMX35_CHIP_REVISION_2_1 0x11
-
-#define CCM_PDR0_399 0x00011000
-#define CCM_PDR0_532 0x00001000
-
-void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- uint32_t r, s;
- unsigned long ccm_base = MX35_CCM_BASE_ADDR;
- unsigned long iomuxc_base = MX35_IOMUXC_BASE_ADDR;
- unsigned long esdctl_base = MX35_ESDCTL_BASE_ADDR;
-
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(MX35_IRAM_BASE_ADDR + MX35_IRAM_SIZE);
-
- r = get_cr();
- r |= CR_Z; /* Flow prediction (Z) */
- r |= CR_U; /* unaligned accesses */
- r |= CR_FI; /* Low Int Latency */
-
- __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(s));
- s |= 0x7;
- __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1" : : "r"(s));
-
- set_cr(r);
-
- r = 0;
- __asm__ __volatile__("mcr p15, 0, %0, c15, c2, 4" : : "r"(r));
-
- /*
- * Branch predicition is now enabled. Flush the BTAC to ensure a valid
- * starting point. Don't flush BTAC while it is disabled to avoid
- * ARM1136 erratum 408023.
- */
- __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 6" : : "r"(r));
-
- /* invalidate I cache and D cache */
- __asm__ __volatile__("mcr p15, 0, %0, c7, c7, 0" : : "r"(r));
-
- /* invalidate TLBs */
- __asm__ __volatile__("mcr p15, 0, %0, c8, c7, 0" : : "r"(r));
-
- /* Drain the write buffer */
- __asm__ __volatile__("mcr p15, 0, %0, c7, c10, 4" : : "r"(r));
-
- /* Also setup the Peripheral Port Remap register inside the core */
- r = 0x40000015; /* start from AIPS 2GB region */
- __asm__ __volatile__("mcr p15, 0, %0, c15, c2, 4" : : "r"(r));
-
- /*
- * End of ARM1136 init
- */
-
- writel(0x003F4208, ccm_base + MX35_CCM_CCMR);
-
- /* Set MPLL , arm clock and ahb clock*/
- writel(MPCTL_PARAM_532, ccm_base + MX35_CCM_MPCTL);
-
- writel(PPCTL_PARAM_300, ccm_base + MX35_CCM_PPCTL);
-
- /* Check silicon revision and use 532MHz if >=2.1 */
- r = readl(MX35_IIM_BASE_ADDR + 0x24);
- if (r >= IMX35_CHIP_REVISION_2_1)
- writel(CCM_PDR0_532, ccm_base + MX35_CCM_PDR0);
- else
- writel(CCM_PDR0_399, ccm_base + MX35_CCM_PDR0);
-
- r = readl(ccm_base + MX35_CCM_CGR0);
- r |= 0x3 << MX35_CCM_CGR0_EPIT1_SHIFT;
- writel(r, ccm_base + MX35_CCM_CGR0);
-
- r = readl(ccm_base + MX35_CCM_CGR1);
- r |= 0x3 << MX35_CCM_CGR1_FEC_SHIFT;
- r |= 0x3 << MX35_CCM_CGR1_I2C1_SHIFT;
- writel(r, ccm_base + MX35_CCM_CGR1);
-
- r = readl(MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL);
- r |= 0x1000;
- writel(r, MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL);
-
- /* Skip SDRAM initialization if we run from RAM */
- r = get_pc();
- if (r > 0x80000000 && r < 0x90000000)
- goto out;
-
- /* Set DDR Type to SDRAM, drive strength workaround *
- * 0x00000000 MDDR *
- * 0x00000800 3,3V SDRAM */
-
- r = 0x00000800;
- writel(r, iomuxc_base + 0x794);
- writel(r, iomuxc_base + 0x798);
- writel(r, iomuxc_base + 0x79c);
- writel(r, iomuxc_base + 0x7a0);
- writel(r, iomuxc_base + 0x7a4);
-
- /* MDDR init, enable mDDR*/
- writel(0x00000304, esdctl_base + IMX_ESDMISC); /* was 0x00000004 */
-
- /* set timing paramters */
- writel(0x0025541F, esdctl_base + IMX_ESDCFG0);
- /* select Precharge-All mode */
- writel(0x92220000, esdctl_base + IMX_ESDCTL0);
- /* Precharge-All */
- writel(0x12345678, MX35_CSD0_BASE_ADDR + 0x400);
-
- /* select Load-Mode-Register mode */
- writel(0xB8001000, esdctl_base + IMX_ESDCTL0);
- /* Load reg EMR2 */
- writeb(0xda, 0x84000000);
- /* Load reg EMR3 */
- writeb(0xda, 0x86000000);
- /* Load reg EMR1 -- enable DLL */
- writeb(0xda, 0x82000400);
- /* Load reg MR -- reset DLL */
- writeb(0xda, 0x80000333);
-
- /* select Precharge-All mode */
- writel(0x92220000, esdctl_base + IMX_ESDCTL0);
- /* Precharge-All */
- writel(0x12345678, MX35_CSD0_BASE_ADDR + 0x400);
-
- /* select Manual-Refresh mode */
- writel(0xA2220000, esdctl_base + IMX_ESDCTL0);
- /* Manual-Refresh 2 times */
- writel(0x87654321, MX35_CSD0_BASE_ADDR);
- writel(0x87654321, MX35_CSD0_BASE_ADDR);
-
- /* select Load-Mode-Register mode */
- writel(0xB2220000, esdctl_base + IMX_ESDCTL0);
- /* Load reg MR -- CL3, BL8, end DLL reset */
- writeb(0xda, 0x80000233);
- /* Load reg EMR1 -- OCD default */
- writeb(0xda, 0x82000780);
- /* Load reg EMR1 -- OCD exit */
- writeb(0xda, 0x82000400);
-
- /* select normal-operation mode
- * DSIZ32-bit, BL8, COL10-bit, ROW13-bit
- * disable PWT & PRCT
- * disable Auto-Refresh */
- writel(0x82220080, esdctl_base + IMX_ESDCTL0);
-
- /* enable Auto-Refresh */
- writel(0x82228080, esdctl_base + IMX_ESDCTL0);
- /* enable Auto-Refresh */
- writel(0x00002000, esdctl_base + IMX_ESDCTL1);
-
- if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND)) {
- /* Speed up NAND controller by adjusting the NFC divider */
- r = readl(MX35_CCM_BASE_ADDR + MX35_CCM_PDR4);
- r &= ~(0xf << 28);
- r |= 0x1 << 28;
- writel(r, MX35_CCM_BASE_ADDR + MX35_CCM_PDR4);
-
- imx35_barebox_boot_nand_external();
- }
-
-out:
- imx35_barebox_entry(NULL);
-}
diff --git a/arch/arm/boards/phytec-phycore-imx35/pcm043.c b/arch/arm/boards/phytec-phycore-imx35/pcm043.c
deleted file mode 100644
index 76615e6c44..0000000000
--- a/arch/arm/boards/phytec-phycore-imx35/pcm043.c
+++ /dev/null
@@ -1,313 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
-// SPDX-FileCopyrightText: 2009 Juergen Beisert <kernel@pengutronix.de>, Pengutronix
-
-/* Board support for Phytec's, i.MX35 based CPU card, called: PCM043 */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <driver.h>
-#include <environment.h>
-#include <fs.h>
-#include <gpio.h>
-#include <linux/sizes.h>
-#include <mach/imx35-regs.h>
-#include <asm/armlinux.h>
-#include <io.h>
-#include <nand.h>
-#include <generated/mach-types.h>
-#include <mach/imx-nand.h>
-#include <fb.h>
-#include <led.h>
-#include <bootsource.h>
-#include <asm/mmu.h>
-#include <mach/weim.h>
-#include <mach/imx-ipu-fb.h>
-#include <mach/imx-pll.h>
-#include <mach/iomux-mx35.h>
-#include <mach/devices-imx35.h>
-#include <mach/generic.h>
-#include <mach/bbu.h>
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_MII,
-};
-
-struct imx_nand_platform_data nand_info = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static struct fb_videomode pcm043_fb_mode[] = {
- {
- /* 240x320 @ 60 Hz */
- .name = "TX090",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 38255,
- .left_margin = 144,
- .right_margin = 0,
- .upper_margin = 7,
- .lower_margin = 40,
- .hsync_len = 96,
- .vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- }, {
- /* 240x320 @ 60 Hz */
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | \
- FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
- .vmode = FB_VMODE_NONINTERLACED,
- }
-};
-
-static struct imx_ipu_fb_platform_data ipu_fb_data = {
- .mode = pcm043_fb_mode,
- .num_modes = ARRAY_SIZE(pcm043_fb_mode),
- .framebuffer_ovl = (void *) (MX35_CSD0_BASE_ADDR + SZ_128M - SZ_1M),
- .bpp = 16,
-};
-
-static int pcm043_mmu_init(void)
-{
- l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
-
- return 0;
-}
-postmmu_initcall(pcm043_mmu_init);
-
-struct gpio_led led0 = {
- .gpio = 1 * 32 + 6,
-};
-
-static int pcm043_devices_init(void)
-{
- uint32_t reg;
- char *envstr;
- unsigned long bbu_nand_flags = 0;
-
- /* CS0: Nor Flash */
- imx35_setup_weimcs(5, 0x22C0CF00, 0x75000D01, 0x00000900);
-
- led_gpio_register(&led0);
-
- reg = readl(MX35_CCM_BASE_ADDR + MX35_CCM_RCSR);
- /* some fuses provide us vital information about connected hardware */
- if (reg & 0x20000000)
- nand_info.width = 2; /* 16 bit */
- else
- nand_info.width = 1; /* 8 bit */
-
- imx35_add_fec(&fec_info);
- /*
- * This platform supports NOR and NAND
- */
- imx35_add_nand(&nand_info);
- /*
- * Up to 32MiB NOR type flash, connected to
- * CS line 0, data width is 16 bit
- */
- add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX35_CS0_BASE_ADDR, 32 * 1024 * 1024, 0);
-
- switch (bootsource_get()) {
- case BOOTSOURCE_NAND:
- devfs_add_partition("nand0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
- dev_add_bb_dev("self_raw", "self0");
- devfs_add_partition("nand0", SZ_512K, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw");
- dev_add_bb_dev("env_raw", "env0");
- envstr = "NAND";
- bbu_nand_flags = BBU_HANDLER_FLAG_DEFAULT;
- break;
- case BOOTSOURCE_NOR:
- default:
- devfs_add_partition("nor0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self0"); /* ourself */
- devfs_add_partition("nor0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env0"); /* environment */
- protect_file("/dev/env0", 1);
- envstr = "NOR";
- break;
- }
-
- pr_info("using environment from %s flash\n", envstr);
-
- imx35_add_fb(&ipu_fb_data);
-
- armlinux_set_architecture(MACH_TYPE_PCM043);
-
- imx_bbu_external_nand_register_handler("nand", "/dev/nand0.barebox",
- bbu_nand_flags);
-
- return 0;
-}
-
-device_initcall(pcm043_devices_init);
-
-static iomux_v3_cfg_t pcm043_pads[] = {
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RTS1__UART1_RTS,
- MX35_PAD_CTS1__UART1_CTS,
- MX35_PAD_I2C1_CLK__I2C1_SCL,
- MX35_PAD_I2C1_DAT__I2C1_SDA,
- MX35_PAD_ATA_CS0__GPIO2_6, /* LED */
-};
-
-static int imx35_console_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
-
- barebox_set_model("Phytec phyCORE-i.MX35");
- barebox_set_hostname("phycore-imx35");
-
- imx35_add_uart0();
-
- return 0;
-}
-
-console_initcall(imx35_console_init);
-
-static int pcm043_core_setup(void)
-{
- u32 tmp;
-
- /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.*/
- /*
- * Set all MPROTx to be non-bufferable, trusted for R/W,
- * not forced to user-mode.
- */
- writel(0x77777777, MX35_AIPS1_BASE_ADDR);
- writel(0x77777777, MX35_AIPS1_BASE_ADDR + 0x4);
- writel(0x77777777, MX35_AIPS2_BASE_ADDR);
- writel(0x77777777, MX35_AIPS2_BASE_ADDR + 0x4);
-
- /*
- * Clear the on and off peripheral modules Supervisor Protect bit
- * for SDMA to access them. Did not change the AIPS control registers
- * (offset 0x20) access type
- */
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x40);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x44);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x48);
- writel(0x0, MX35_AIPS1_BASE_ADDR + 0x4C);
- tmp = readl(MX35_AIPS1_BASE_ADDR + 0x50);
- tmp &= 0x00FFFFFF;
- writel(tmp, MX35_AIPS1_BASE_ADDR + 0x50);
-
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x40);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x44);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x48);
- writel(0x0, MX35_AIPS2_BASE_ADDR + 0x4C);
- tmp = readl(MX35_AIPS2_BASE_ADDR + 0x50);
- tmp &= 0x00FFFFFF;
- writel(tmp, MX35_AIPS2_BASE_ADDR + 0x50);
-
- /* MAX (Multi-Layer AHB Crossbar Switch) setup */
-
- /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-#define MAX_PARAM1 0x00302154
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x0); /* for S0 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x100); /* for S1 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x200); /* for S2 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x300); /* for S3 */
- writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x400); /* for S4 */
-
- /* SGPCR - always park on last master */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x10); /* for S0 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x110); /* for S1 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x210); /* for S2 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x310); /* for S3 */
- writel(0x10, MX35_MAX_BASE_ADDR + 0x410); /* for S4 */
-
- /* MGPCR - restore default values */
- writel(0x0, MX35_MAX_BASE_ADDR + 0x800); /* for M0 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0x900); /* for M1 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xa00); /* for M2 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xb00); /* for M3 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xc00); /* for M4 */
- writel(0x0, MX35_MAX_BASE_ADDR + 0xd00); /* for M5 */
-
- /*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = MAX1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[3] = USB not on priority list (0 << 0) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
- * MRRP[5] = GPU not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
- * ------------
- * 0x00000040
- */
- writel(0x40, MX35_M3IF_BASE_ADDR);
-
- return 0;
-}
-
-core_initcall(pcm043_core_setup);
-
-static int do_cpufreq(int argc, char *argv[])
-{
- unsigned long freq;
-
- if (argc != 2)
- return COMMAND_ERROR_USAGE;
-
- freq = simple_strtoul(argv[1], NULL, 0);
-
- switch (freq) {
- case 399:
- writel(MPCTL_PARAM_399, MX35_CCM_BASE_ADDR + MX35_CCM_MPCTL);
- break;
- case 532:
- writel(MPCTL_PARAM_532, MX35_CCM_BASE_ADDR + MX35_CCM_MPCTL);
- break;
- default:
- return COMMAND_ERROR_USAGE;
- }
-
- printf("Switched CPU frequency to %luMHz\n", freq);
-
- return 0;
-}
-
-BAREBOX_CMD_START(cpufreq)
- .cmd = do_cpufreq,
- BAREBOX_CMD_DESC("adjust CPU frequency")
- BAREBOX_CMD_OPTS("399|532")
- BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
-BAREBOX_CMD_END
-
diff --git a/arch/arm/configs/cupid_defconfig b/arch/arm/configs/cupid_defconfig
deleted file mode 100644
index 4e6dd96a97..0000000000
--- a/arch/arm/configs/cupid_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_TEXT_BASE=0x87F00000
-CONFIG_ARCH_IMX=y
-CONFIG_CACHE_L2X0=y
-CONFIG_MACH_GUF_CUPID=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x1000000
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_GLOB=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_MENU=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_TIME=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_NET_RESOLV=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-# CONFIG_SPI is not set
-CONFIG_MTD=y
-CONFIG_NAND=y
-# CONFIG_NAND_ECC_SOFT is not set
-# CONFIG_NAND_ECC_HW_SYNDROME is not set
-CONFIG_NAND_IMX=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_IMX_IPU=y
-CONFIG_MCI=y
-CONFIG_MCI_IMX_ESDHC=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_ZLIB=y
-CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/configs/eukrea_cpuimx25_defconfig b/arch/arm/configs/eukrea_cpuimx25_defconfig
deleted file mode 100644
index b296122bc2..0000000000
--- a/arch/arm/configs/eukrea_cpuimx25_defconfig
+++ /dev/null
@@ -1,87 +0,0 @@
-CONFIG_ARCH_IMX=y
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
-CONFIG_MACH_EUKREA_CPUIMX25=y
-CONFIG_IMX_IIM=y
-CONFIG_IMX_IIM_FUSE_BLOW=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_PBL_IMAGE=y
-CONFIG_PBL_RELOCATABLE=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x800000
-CONFIG_EXPERIMENTAL=y
-CONFIG_MALLOC_TLSF=y
-CONFIG_RELOCATABLE=y
-CONFIG_GLOB=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_CONSOLE_ACTIVATE_ALL=y
-CONFIG_DEFAULT_COMPRESSION_LZO=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_LOADB=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_AUTOMOUNT=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_LED=y
-CONFIG_CMD_LED_TRIGGER=y
-CONFIG_CMD_OFTREE=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_NET_RESOLV=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-# CONFIG_SPI is not set
-CONFIG_I2C=y
-CONFIG_I2C_IMX=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_DEVICE=y
-CONFIG_NAND=y
-CONFIG_NAND_IMX=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_USB_HOST=y
-CONFIG_USB_IMX_CHIPIDEA=y
-CONFIG_USB_EHCI=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_IMX=y
-CONFIG_MCI=y
-CONFIG_MCI_IMX_ESDHC=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_LED_TRIGGERS=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_BMP=y
-CONFIG_PNG=y
diff --git a/arch/arm/configs/eukrea_cpuimx27_defconfig b/arch/arm/configs/eukrea_cpuimx27_defconfig
deleted file mode 100644
index cb4a709d42..0000000000
--- a/arch/arm/configs/eukrea_cpuimx27_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_TEXT_BASE=0xa7f00000
-CONFIG_ARCH_IMX=y
-CONFIG_MACH_EUKREA_CPUIMX27=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x800000
-CONFIG_GLOB=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_CONSOLE_ACTIVATE_ALL=y
-CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/eukrea_cpuimx27/env"
-CONFIG_LONGHELP=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_NET=y
-CONFIG_DRIVER_SERIAL_NS16550=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-# CONFIG_SPI is not set
-CONFIG_I2C=y
-CONFIG_I2C_IMX=y
-CONFIG_MTD=y
-CONFIG_DRIVER_CFI=y
-# CONFIG_DRIVER_CFI_AMD is not set
-# CONFIG_DRIVER_CFI_BANK_WIDTH_1 is not set
-# CONFIG_DRIVER_CFI_BANK_WIDTH_4 is not set
-CONFIG_CFI_BUFFER_WRITE=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_IMX=y
-CONFIG_MFD_LP3972=y
-CONFIG_FS_TFTP=y
diff --git a/arch/arm/configs/eukrea_cpuimx35_defconfig b/arch/arm/configs/eukrea_cpuimx35_defconfig
deleted file mode 100644
index b3d5741c69..0000000000
--- a/arch/arm/configs/eukrea_cpuimx35_defconfig
+++ /dev/null
@@ -1,95 +0,0 @@
-CONFIG_ARCH_IMX=y
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
-CONFIG_MACH_EUKREA_CPUIMX35=y
-CONFIG_IMX_IIM=y
-CONFIG_IMX_IIM_FUSE_BLOW=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_PBL_IMAGE=y
-CONFIG_PBL_RELOCATABLE=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x800000
-CONFIG_EXPERIMENTAL=y
-CONFIG_MALLOC_TLSF=y
-CONFIG_RELOCATABLE=y
-CONFIG_GLOB=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_CONSOLE_ACTIVATE_ALL=y
-CONFIG_DEFAULT_COMPRESSION_LZO=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_IMD=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_LOADB=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_AUTOMOUNT=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_MM=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DETECT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_LED=y
-CONFIG_CMD_LED_TRIGGER=y
-CONFIG_CMD_USBGADGET=y
-CONFIG_CMD_OFTREE=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-CONFIG_SMSC_PHY=y
-# CONFIG_SPI is not set
-CONFIG_I2C=y
-CONFIG_I2C_IMX=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_DEVICE=y
-CONFIG_NAND=y
-CONFIG_NAND_ALLOW_ERASE_BAD=y
-CONFIG_NAND_IMX=y
-CONFIG_USB_HOST=y
-CONFIG_USB_IMX_CHIPIDEA=y
-CONFIG_USB_EHCI=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DFU=y
-CONFIG_USB_GADGET_SERIAL=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_IMX_IPU=y
-CONFIG_MCI=y
-CONFIG_MCI_IMX_ESDHC=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_LED_TRIGGERS=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/configs/eukrea_cpuimx51_defconfig b/arch/arm/configs/eukrea_cpuimx51_defconfig
deleted file mode 100644
index 8d700b1e75..0000000000
--- a/arch/arm/configs/eukrea_cpuimx51_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_ARCH_IMX=y
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
-CONFIG_MACH_EUKREA_CPUIMX51SD=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x2000000
-CONFIG_EXPERIMENTAL=y
-CONFIG_MALLOC_TLSF=y
-CONFIG_GLOB=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_LOADB=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_LED=y
-CONFIG_CMD_LED_TRIGGER=y
-CONFIG_CMD_OFTREE=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_NET_RESOLV=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-# CONFIG_SPI is not set
-CONFIG_I2C=y
-CONFIG_I2C_IMX=y
-CONFIG_MTD=y
-CONFIG_NAND=y
-CONFIG_NAND_IMX=y
-CONFIG_MCI=y
-CONFIG_MCI_IMX_ESDHC=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_LED_TRIGGERS=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/configs/freescale-mx25-3ds_defconfig b/arch/arm/configs/freescale-mx25-3ds_defconfig
deleted file mode 100644
index eca608be40..0000000000
--- a/arch/arm/configs/freescale-mx25-3ds_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_TEXT_BASE=0x87F00000
-CONFIG_ARCH_IMX=y
-CONFIG_MACH_FREESCALE_MX25_3STACK=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x01000000
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_GLOB=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-# CONFIG_ERRNO_MESSAGES is not set
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_TIME=y
-CONFIG_NET=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-# CONFIG_SPI is not set
-CONFIG_USB_HOST=y
-CONFIG_USB_EHCI=y
-CONFIG_FS_TFTP=y
-CONFIG_ZLIB=y
-CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/configs/freescale-mx27-ads_defconfig b/arch/arm/configs/freescale-mx27-ads_defconfig
deleted file mode 100644
index ef112d6d5c..0000000000
--- a/arch/arm/configs/freescale-mx27-ads_defconfig
+++ /dev/null
@@ -1,35 +0,0 @@
-CONFIG_TEXT_BASE=0xa7f00000
-CONFIG_ARCH_IMX=y
-CONFIG_MACH_IMX27ADS=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/freescale-mx27-ads/env"
-CONFIG_LONGHELP=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_NET=y
-CONFIG_DRIVER_SPI_IMX=y
-CONFIG_MTD=y
-CONFIG_DRIVER_CFI=y
-# CONFIG_DRIVER_CFI_INTEL is not set
-CONFIG_CFI_BUFFER_WRITE=y
-CONFIG_FS_TFTP=y
diff --git a/arch/arm/configs/freescale-mx35-3ds_defconfig b/arch/arm/configs/freescale-mx35-3ds_defconfig
deleted file mode 100644
index 5399849a54..0000000000
--- a/arch/arm/configs/freescale-mx35-3ds_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_TEXT_BASE=0x87F00000
-CONFIG_ARCH_IMX=y
-CONFIG_MACH_FREESCALE_MX35_3STACK=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MALLOC_SIZE=0x1000000
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_GLOB=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_TIME=y
-CONFIG_NET=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-CONFIG_DRIVER_NET_SMC911X=y
-# CONFIG_SPI is not set
-CONFIG_MTD=y
-CONFIG_DRIVER_CFI=y
-CONFIG_CFI_BUFFER_WRITE=y
-CONFIG_NAND=y
-CONFIG_NAND_IMX=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_IMX_IPU=y
-CONFIG_FS_TFTP=y
-CONFIG_ZLIB=y
-CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/configs/freescale-mx53-smd_defconfig b/arch/arm/configs/freescale-mx53-smd_defconfig
deleted file mode 100644
index b292b972a3..0000000000
--- a/arch/arm/configs/freescale-mx53-smd_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_ARCH_IMX=y
-CONFIG_MACH_FREESCALE_MX53_SMD=y
-CONFIG_IMX_IIM=y
-CONFIG_IMX_IIM_FUSE_BLOW=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x2000000
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_GLOB=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_TIME=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-# CONFIG_SPI is not set
-CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
-CONFIG_MCI_IMX_ESDHC=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_ZLIB=y
-CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/configs/kindle3_defconfig b/arch/arm/configs/kindle3_defconfig
deleted file mode 100644
index 98691c3a81..0000000000
--- a/arch/arm/configs/kindle3_defconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_ARCH_IMX=y
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x30000
-CONFIG_MACH_KINDLE3=y
-CONFIG_IMX_IIM=y
-CONFIG_AEABI=y
-CONFIG_ARM_BOARD_APPEND_ATAG=y
-CONFIG_ARM_BOARD_PREPEND_ATAG=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_PBL_IMAGE=y
-CONFIG_PBL_RELOCATABLE=y
-CONFIG_IMAGE_COMPRESSION_XZKERN=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x2000000
-CONFIG_MALLOC_TLSF=y
-CONFIG_RELOCATABLE=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/kindle3/env/"
-CONFIG_RESET_SOURCE=y
-CONFIG_CMD_DMESG=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MMC_EXTCSD=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_LOADY=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_DEFAULTENV=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_READF=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USBGADGET=y
-CONFIG_DRIVER_SPI_IMX=y
-CONFIG_I2C=y
-CONFIG_I2C_IMX=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_SERIAL=y
-CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
-CONFIG_MCI_IMX_ESDHC=y
-CONFIG_MFD_MC13XXX=y
-CONFIG_FS_EXT4=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_ARCH_IMX_USBLOADER=y
diff --git a/arch/arm/configs/neso_defconfig b/arch/arm/configs/neso_defconfig
deleted file mode 100644
index 7d6ab2818e..0000000000
--- a/arch/arm/configs/neso_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_ARCH_IMX=y
-CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND=y
-CONFIG_MACH_NESO=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x1000000
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_GLOB=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_TIME=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_NET_RESOLV=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-CONFIG_NET_USB=y
-CONFIG_NET_USB_ASIX=y
-CONFIG_DRIVER_SPI_IMX=y
-CONFIG_MTD=y
-CONFIG_NAND=y
-# CONFIG_NAND_ECC_SOFT is not set
-# CONFIG_NAND_ECC_HW_SYNDROME is not set
-CONFIG_NAND_IMX=y
-CONFIG_USB_HOST=y
-CONFIG_USB_EHCI=y
-CONFIG_USB_ULPI=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_IMX=y
-CONFIG_IMXFB_DRIVER_VIDEO_IMX_OVERLAY=y
-CONFIG_FS_TFTP=y
diff --git a/arch/arm/configs/phytec-phycore-imx31_defconfig b/arch/arm/configs/phytec-phycore-imx31_defconfig
deleted file mode 100644
index a6bc28c4c7..0000000000
--- a/arch/arm/configs/phytec-phycore-imx31_defconfig
+++ /dev/null
@@ -1,82 +0,0 @@
-CONFIG_ARCH_IMX=y
-CONFIG_CACHE_L2X0=y
-CONFIG_MACH_PCM037=y
-CONFIG_IMX_IIM=y
-CONFIG_IMX_IIM_FUSE_BLOW=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x01000000
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_MENU=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/phytec-phycore-imx31/env"
-CONFIG_RESET_SOURCE=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_LN=y
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_MENU=y
-CONFIG_CMD_MENU_MANAGEMENT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_BAREBOX_UPDATE=y
-CONFIG_CMD_TIME=y
-CONFIG_NET=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_DRIVER_NET_SMC911X=y
-CONFIG_NET_USB=y
-CONFIG_NET_USB_ASIX=y
-CONFIG_MTD=y
-CONFIG_DRIVER_CFI=y
-CONFIG_CFI_BUFFER_WRITE=y
-CONFIG_NAND=y
-CONFIG_NAND_IMX=y
-CONFIG_USB_HOST=y
-CONFIG_USB_EHCI=y
-CONFIG_FS_EXT4=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_NFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_ZLIB=y
-CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/configs/phytec-phycore-imx35_defconfig b/arch/arm/configs/phytec-phycore-imx35_defconfig
deleted file mode 100644
index 2ed2cf9ef3..0000000000
--- a/arch/arm/configs/phytec-phycore-imx35_defconfig
+++ /dev/null
@@ -1,86 +0,0 @@
-CONFIG_TEXT_BASE=0x87E00000
-CONFIG_ARCH_IMX=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND=y
-CONFIG_MACH_PCM043=y
-CONFIG_IMX_IIM=y
-CONFIG_IMX_IIM_FUSE_BLOW=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x1000000
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_MENU=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/phytec-phycore-imx35/env"
-CONFIG_RESET_SOURCE=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-# CONFIG_CMD_BOOTU is not set
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_LN=y
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_LET=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_READF=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_MENU=y
-CONFIG_CMD_MENU_MANAGEMENT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DETECT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_WD=y
-CONFIG_CMD_BAREBOX_UPDATE=y
-CONFIG_CMD_OF_NODE=y
-CONFIG_CMD_OF_PROPERTY=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_TIME=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-# CONFIG_SPI is not set
-CONFIG_MTD=y
-CONFIG_DRIVER_CFI=y
-CONFIG_CFI_BUFFER_WRITE=y
-CONFIG_NAND=y
-CONFIG_NAND_IMX=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_IMX=y
-CONFIG_FS_TFTP=y
-CONFIG_ZLIB=y
-CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 2e49fdb9d5..ea4756c493 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -4,25 +4,12 @@ if ARCH_IMX
config ARCH_TEXT_BASE
hex
- default 0x83f00000 if MACH_EUKREA_CPUIMX25
- default 0xa0000000 if MACH_EUKREA_CPUIMX27
- default 0x87f00000 if MACH_EUKREA_CPUIMX35
- default 0x97f00000 if MACH_EUKREA_CPUIMX51SD
- default 0xc0000000 if MACH_IMX21ADS
- default 0xa0000000 if MACH_IMX27ADS
- default 0x83f00000 if MACH_FREESCALE_MX25_3STACK && FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2
- default 0x87f00000 if MACH_FREESCALE_MX25_3STACK && FREESCALE_MX25_3STACK_SDRAM_128MB_MDDR
- default 0x87f00000 if MACH_FREESCALE_MX35_3STACK
default 0xa7f00000 if MACH_PCA100
default 0xa0000000 if MACH_PCM038
- default 0x87f00000 if MACH_PCM037
- default 0x87f00000 if MACH_PCM043
- default 0xa7e00000 if MACH_NESO
default 0x97f00000 if MACH_FREESCALE_MX51_PDK
default 0x7ff00000 if MACH_FREESCALE_MX53_LOCO
default 0x7ff00000 if MACH_FREESCALE_MX53_SMD
default 0x7ff00000 if MACH_FREESCALE_MX53_VMX53
- default 0x87f00000 if MACH_GUF_CUPID
default 0x93d00000 if MACH_TX25
default 0x7ff00000 if MACH_TQMA53
default 0x4fc00000 if MACH_SABRELITE
@@ -31,7 +18,6 @@ config ARCH_TEXT_BASE
default 0x17800000 if MACH_SABRESD
default 0x4fc00000 if MACH_REALQ7
default 0x4fc00000 if MACH_GK802
- default 0x87f00000 if MACH_KINDLE3
default 0x2fc00000 if MACH_TQMA6X
default 0x4fc00000 if MACH_DFI_FS700_M60
default 0x4fc00000 if MACH_UDOO
@@ -216,13 +202,6 @@ config ARCH_VF610
select IMX_OCOTP # Needed for clock adjustement
select CLOCKSOURCE_ARM_GLOBAL_TIMER
-config IMX_MULTI_BOARDS
- bool "Allow multiple boards to be selected"
- select HAVE_PBL_MULTI_IMAGES
- select RELOCATABLE
-
-if IMX_MULTI_BOARDS
-
config MACH_SCB9328
bool "Synertronixx scb9328"
select ARCH_IMX1
@@ -692,224 +671,8 @@ config MACH_SKOV_IMX6
select DSA
select DRIVER_NET_KSZ8873
-endif
-
-# ----------------------------------------------------------
-
-choice
- prompt "Select Board"
- depends on !IMX_MULTI_BOARDS
-
-# ----------------------------------------------------------
-
-comment "i.MX21 Boards"
-
-config MACH_IMX21ADS
- bool "Freescale i.MX21ADS"
- select ARCH_IMX21
- select HAS_CS8900
- help
- Say Y here if you are using the Freescale i.MX21ads board equipped
- with a Freescale i.MX21 Processor
-
-# ----------------------------------------------------------
-
-comment "i.MX25 Boards"
-
-config MACH_EUKREA_CPUIMX25
- bool "Eukrea CPUIMX25"
- select ARCH_IMX25
- help
- Say Y here if you are using the Eukrea Electromatique's CPUIMX25
- equipped with a Freescale i.MX25 Processor
-
-config MACH_FREESCALE_MX25_3STACK
- bool "Freescale MX25 3stack"
- select ARCH_IMX25
- select I2C
- select MFD_MC34704
- help
- Say Y here if you are using the Freescale MX25 3stack board equipped
- with a Freescale i.MX25 Processor
-
-# ----------------------------------------------------------
-
-comment "i.MX27 Boards"
-
-config MACH_EUKREA_CPUIMX27
- bool "EUKREA CPUIMX27"
- select ARCH_IMX27
- help
- Say Y here if you are using Eukrea's CPUIMX27 equipped
- with a Freescale i.MX27 Processor
-
-config MACH_IMX27ADS
- bool "Freescale i.MX27ADS"
- select ARCH_IMX27
- help
- Say Y here if you are using the Freescale i.MX27ads board equipped
- with a Freescale i.MX27 Processor
-
-config MACH_NESO
- bool "Garz+Fricke Neso"
- select ARCH_IMX27
- help
- Say Y here if you are using the Garz+Fricke Neso board equipped
- with a Freescale i.MX27 Processor
-
-# ----------------------------------------------------------
-
-comment "i.MX31 Boards"
-
-config MACH_PCM037
- bool "phyCORE-i.MX31"
- select ARCH_IMX31
- select USB_ULPI if USB
- select ARCH_HAS_L2X0
- help
- Say Y here if you are using Phytec's phyCORE-i.MX31 (pcm037) equipped
- with a Freescale i.MX31 Processor
-
-# ----------------------------------------------------------
-
-comment "i.MX35 Boards"
-
-config MACH_EUKREA_CPUIMX35
- bool "EUKREA CPUIMX35"
- select ARCH_IMX35
- select ARCH_HAS_L2X0
- help
- Say Y here if you are using Eukrea's CPUIMX35 equipped
- with a Freescale i.MX35 Processor
-
-config MACH_FREESCALE_MX35_3STACK
- bool "Freescale MX35 3stack"
- select ARCH_IMX35
- select I2C
- select I2C_IMX
- select MFD_MC13XXX
- select MFD_MC9SDZ60
- help
- Say Y here if you are using the Freescale MX35 3stack board equipped
- with a Freescale i.MX35 Processor
-
-config MACH_PCM043
- bool "phyCORE-i.MX35"
- select ARCH_IMX35
- select ARCH_HAS_L2X0
- help
- Say Y here if you are using Phytec's phyCORE-i.MX35 (pcm043) equipped
- with a Freescale i.MX35 Processor
-
-config MACH_GUF_CUPID
- bool "Garz+Fricke Cupid"
- select ARCH_IMX35
- select ARCH_HAS_L2X0
- help
- Say Y here if you are using the Garz+Fricke Neso board equipped
- with a Freescale i.MX35 Processor
-
-config MACH_KINDLE3
- bool "Amazon Kindle3"
- select ARCH_IMX35
- select ARCH_HAS_L2X0
- help
- Say Y here if you are using the Amazon Model No. D00901 Kindle
-
# ----------------------------------------------------------
-comment "i.MX51 Boards"
-
-config MACH_EUKREA_CPUIMX51SD
- bool "EUKREA CPUIMX51"
- select ARCH_IMX51
- help
- Say Y here if you are using Eukrea's CPUIMX51 equipped
- with a Freescale i.MX51 Processor
-
-# ----------------------------------------------------------
-
-comment "i.MX53 Boards"
-
-config MACH_FREESCALE_MX53_SMD
- bool "Freescale i.MX53 SMD"
- select ARCH_IMX53
-
-endchoice
-
-# ----------------------------------------------------------
-
-menu "Board specific settings"
-
-if MACH_PCM037
-
-choice
- prompt "SDRAM Bank0"
-config PCM037_SDRAM_BANK0_128MB
- bool "128MB"
-config PCM037_SDRAM_BANK0_256MB
- bool "256MB"
-endchoice
-
-choice
- prompt "SDRAM Bank1"
-config PCM037_SDRAM_BANK1_NONE
- bool "none"
-config PCM037_SDRAM_BANK1_128MB
- bool "128MB"
-config PCM037_SDRAM_BANK1_256MB
- bool "256MB"
-endchoice
-
-endif
-
-if MACH_EUKREA_CPUIMX27
-
-choice
- prompt "SDRAM Size"
-config EUKREA_CPUIMX27_SDRAM_128MB
- bool "128 MB"
-config EUKREA_CPUIMX27_SDRAM_256MB
- bool "256 MB"
-endchoice
-
-choice
- prompt "NOR Flash Size"
-config EUKREA_CPUIMX27_NOR_32MB
- bool "<= 32 MB"
-config EUKREA_CPUIMX27_NOR_64MB
- bool "> 32 MB"
-endchoice
-
-choice
- prompt "Quad UART Port"
- depends on DRIVER_SERIAL_NS16550
-config EUKREA_CPUIMX27_QUART1
- bool "Q1"
-config EUKREA_CPUIMX27_QUART2
- bool "Q2"
-config EUKREA_CPUIMX27_QUART3
- bool "Q3"
-config EUKREA_CPUIMX27_QUART4
- bool "Q4"
-endchoice
-
-endif
-
-if MACH_FREESCALE_MX25_3STACK
-
-choice
- prompt "SDRAM Type"
-config FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2
- bool "64 MB (DDR2)"
-config FREESCALE_MX25_3STACK_SDRAM_128MB_MDDR
- bool "128 MB (mDDR)"
-endchoice
-
-endif
-
-endmenu
-
menu "i.MX specific settings"
config IMX_IIM
--
2.30.2
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: i.MX: Remove config CONFIG_ARCH_TEXT_BASE
2023-03-02 10:52 [PATCH 0/2] i.MX: Remove support for old boards Sascha Hauer
2023-03-02 10:52 ` [PATCH 1/2] ARM: i.MX: Remove " Sascha Hauer
@ 2023-03-02 10:52 ` Sascha Hauer
2023-03-03 8:56 ` [PATCH 0/2] i.MX: Remove support for old boards Marco Felsch
2 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2023-03-02 10:52 UTC (permalink / raw)
To: Barebox List
CONFIG_ARCH_TEXT_BASE is only used when CONFIG_RELOCATABLE
is disabled which is not the case for i.MX. Remove the unused
Kconfig option.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/Kconfig | 23 -----------------------
1 file changed, 23 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ea4756c493..262e2b3e94 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -2,29 +2,6 @@
if ARCH_IMX
-config ARCH_TEXT_BASE
- hex
- default 0xa7f00000 if MACH_PCA100
- default 0xa0000000 if MACH_PCM038
- default 0x97f00000 if MACH_FREESCALE_MX51_PDK
- default 0x7ff00000 if MACH_FREESCALE_MX53_LOCO
- default 0x7ff00000 if MACH_FREESCALE_MX53_SMD
- default 0x7ff00000 if MACH_FREESCALE_MX53_VMX53
- default 0x93d00000 if MACH_TX25
- default 0x7ff00000 if MACH_TQMA53
- default 0x4fc00000 if MACH_SABRELITE
- default 0x8fe00000 if MACH_TX53
- default 0x97f00000 if MACH_EFIKA_MX_SMARTBOOK
- default 0x17800000 if MACH_SABRESD
- default 0x4fc00000 if MACH_REALQ7
- default 0x4fc00000 if MACH_GK802
- default 0x2fc00000 if MACH_TQMA6X
- default 0x4fc00000 if MACH_DFI_FS700_M60
- default 0x4fc00000 if MACH_UDOO
- default 0x4fc00000 if MACH_VARISCITE_MX6
- default 0x4fc00000 if MACH_PHYTEC_SOM_IMX6
- default 0x9fc00000 if MACH_WARP7
-
config ARCH_IMX_IMXIMAGE
bool
default y
--
2.30.2
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 0/2] i.MX: Remove support for old boards
2023-03-02 10:52 [PATCH 0/2] i.MX: Remove support for old boards Sascha Hauer
2023-03-02 10:52 ` [PATCH 1/2] ARM: i.MX: Remove " Sascha Hauer
2023-03-02 10:52 ` [PATCH 2/2] ARM: i.MX: Remove config CONFIG_ARCH_TEXT_BASE Sascha Hauer
@ 2023-03-03 8:56 ` Marco Felsch
2023-03-03 11:53 ` Sascha Hauer
2 siblings, 1 reply; 5+ messages in thread
From: Marco Felsch @ 2023-03-03 8:56 UTC (permalink / raw)
To: Sascha Hauer; +Cc: Barebox List
Hi Sascha,
On 23-03-02, Sascha Hauer wrote:
> This removes a bunch of old boards that nobody showed interest in for a
> long time:
>
> Freescale boards
> ================
> MACH_IMX21ADS
> MACH_IMX27ADS
> MACH_FREESCALE_MX25_3STACK
> MACH_FREESCALE_MX35_3STACK
> MACH_FREESCALE_MX53_SMD
>
> Eukrea boards
> =============
> MACH_EUKREA_CPUIMX25
> MACH_EUKREA_CPUIMX27
> MACH_EUKREA_CPUIMX35
> MACH_EUKREA_CPUIMX51SD
>
> Garz+Fricke boards
> ==================
> MACH_NESO
> MACH_GUF_CUPID
>
> Phytec boards
> =============
> MACH_PCM037
> MACH_PCM043
>
> Amazon boards
> =============
> MACH_KINDLE3
>
> The boards all have in common that they do not support device trees and
> also don't have multi-image support.
Does this mean that we now have dt-only boards? In that case we can
remove platform driver data as well later on :)
Regards,
Marco
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 0/2] i.MX: Remove support for old boards
2023-03-03 8:56 ` [PATCH 0/2] i.MX: Remove support for old boards Marco Felsch
@ 2023-03-03 11:53 ` Sascha Hauer
0 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2023-03-03 11:53 UTC (permalink / raw)
To: Marco Felsch; +Cc: Barebox List
On Fri, Mar 03, 2023 at 09:56:48AM +0100, Marco Felsch wrote:
> Hi Sascha,
>
> On 23-03-02, Sascha Hauer wrote:
> > This removes a bunch of old boards that nobody showed interest in for a
> > long time:
> >
> > Freescale boards
> > ================
> > MACH_IMX21ADS
> > MACH_IMX27ADS
> > MACH_FREESCALE_MX25_3STACK
> > MACH_FREESCALE_MX35_3STACK
> > MACH_FREESCALE_MX53_SMD
> >
> > Eukrea boards
> > =============
> > MACH_EUKREA_CPUIMX25
> > MACH_EUKREA_CPUIMX27
> > MACH_EUKREA_CPUIMX35
> > MACH_EUKREA_CPUIMX51SD
> >
> > Garz+Fricke boards
> > ==================
> > MACH_NESO
> > MACH_GUF_CUPID
> >
> > Phytec boards
> > =============
> > MACH_PCM037
> > MACH_PCM043
> >
> > Amazon boards
> > =============
> > MACH_KINDLE3
> >
> > The boards all have in common that they do not support device trees and
> > also don't have multi-image support.
>
> Does this mean that we now have dt-only boards? In that case we can
> remove platform driver data as well later on :)
I haven't realized this, but yes, all the imx_add_* functions are unused
now.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-03-03 11:55 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-02 10:52 [PATCH 0/2] i.MX: Remove support for old boards Sascha Hauer
2023-03-02 10:52 ` [PATCH 1/2] ARM: i.MX: Remove " Sascha Hauer
2023-03-02 10:52 ` [PATCH 2/2] ARM: i.MX: Remove config CONFIG_ARCH_TEXT_BASE Sascha Hauer
2023-03-03 8:56 ` [PATCH 0/2] i.MX: Remove support for old boards Marco Felsch
2023-03-03 11:53 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox