From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 1/4] ARM: i.MX8M: add option to install OP-TEE
Date: Tue, 7 Mar 2023 10:34:23 +0100 [thread overview]
Message-ID: <20230307093426.1551193-1-a.fatoum@pengutronix.de> (raw)
While infrastructure for installing OP-TEE was already there, no
upstream boards made use of it. Let's have OP-TEE installation happen in
generic code, so it may be enabled for any upstream board.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
arch/arm/mach-imx/atf.c | 50 ++++++++++++++++++++------
arch/arm/mach-imx/include/mach/xload.h | 16 +++++++++
firmware/.gitignore | 1 +
firmware/Kconfig | 12 +++++++
firmware/Makefile | 9 +++--
5 files changed, 74 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-imx/atf.c b/arch/arm/mach-imx/atf.c
index 2a3e3f53b885..640881afaaca 100644
--- a/arch/arm/mach-imx/atf.c
+++ b/arch/arm/mach-imx/atf.c
@@ -7,6 +7,9 @@
#include <mach/generic.h>
#include <mach/xload.h>
#include <mach/romapi.h>
+#include <mach/esdctl.h>
+#include <asm-generic/memory_layout.h>
+#include <asm/barebox-arm.h>
#include <soc/fsl/fsl_udc.h>
#include <soc/fsl/caam.h>
@@ -133,9 +136,17 @@ void imx8mm_load_bl33(void *bl33)
__noreturn void imx8mm_load_and_start_image_via_tfa(void)
{
- imx8mm_save_bootrom_log();
- imx8mm_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
- imx8mm_load_and_start_tfa(imx8mm_bl31_bin);
+ void *bl33 = (void *)MX8M_ATF_BL33_BASE_ADDR;
+ void *endmem = (void *)MX8M_DDR_CSD1_BASE_ADDR +
+ imx8m_barebox_earlymem_size(32);
+
+ imx8m_save_bootrom_log(__arm_mem_scratch(endmem));
+ imx8mm_load_bl33(bl33);
+
+ if (IS_ENABLED(CONFIG_FIRMWARE_IMX8MM_OPTEE))
+ imx8m_load_and_start_optee_via_tfa(imx8mm, endmem - OPTEE_SIZE, bl33);
+ else
+ imx8mm_load_and_start_tfa(imx8mm_bl31_bin);
}
void imx8mp_load_bl33(void *bl33)
@@ -168,13 +179,22 @@ void imx8mp_load_bl33(void *bl33)
memcpy(bl33, __image_start, barebox_pbl_size);
}
-void imx8mp_load_and_start_image_via_tfa(void)
+__noreturn void imx8mp_load_and_start_image_via_tfa(void)
{
- imx8mp_save_bootrom_log();
- imx8mp_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
- imx8mp_load_and_start_tfa(imx8mp_bl31_bin);
+ void *bl33 = (void *)MX8M_ATF_BL33_BASE_ADDR;
+ void *endmem = (void *)MX8M_DDR_CSD1_BASE_ADDR +
+ imx8m_barebox_earlymem_size(32);
+
+ imx8m_save_bootrom_log(__arm_mem_scratch(endmem));
+ imx8mp_load_bl33(bl33);
+
+ if (IS_ENABLED(CONFIG_FIRMWARE_IMX8MP_OPTEE))
+ imx8m_load_and_start_optee_via_tfa(imx8mp, endmem - OPTEE_SIZE, bl33);
+ else
+ imx8mp_load_and_start_tfa(imx8mp_bl31_bin);
}
+
void imx8mn_load_bl33(void *bl33)
{
enum bootsource src;
@@ -205,9 +225,17 @@ void imx8mn_load_bl33(void *bl33)
memcpy(bl33, __image_start, barebox_pbl_size);
}
-void imx8mn_load_and_start_image_via_tfa(void)
+__noreturn void imx8mn_load_and_start_image_via_tfa(void)
{
- imx8mn_save_bootrom_log();
- imx8mn_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
- imx8mn_load_and_start_tfa(imx8mn_bl31_bin);
+ void *bl33 = (void *)MX8M_ATF_BL33_BASE_ADDR;
+ void *endmem = (void *)MX8M_DDR_CSD1_BASE_ADDR +
+ imx8m_barebox_earlymem_size(16);
+
+ imx8m_save_bootrom_log(__arm_mem_scratch(endmem));
+ imx8mn_load_bl33(bl33);
+
+ if (IS_ENABLED(CONFIG_FIRMWARE_IMX8MN_OPTEE))
+ imx8m_load_and_start_optee_via_tfa(imx8mn, endmem - OPTEE_SIZE, bl33);
+ else
+ imx8mn_load_and_start_tfa(imx8mn_bl31_bin);
}
diff --git a/arch/arm/mach-imx/include/mach/xload.h b/arch/arm/mach-imx/include/mach/xload.h
index aa2fa5129a11..713fc1a8fcb7 100644
--- a/arch/arm/mach-imx/include/mach/xload.h
+++ b/arch/arm/mach-imx/include/mach/xload.h
@@ -5,6 +5,7 @@
#include <linux/compiler.h>
#include <linux/types.h>
+#include <mach/tzasc.h>
int imx53_nand_start_image(void);
int imx6_spi_load_image(int instance, unsigned int flash_offset, void *buf, int len);
@@ -42,4 +43,19 @@ struct imx_scratch_space *__imx8m_scratch_space(int ddr_buswidth);
#define imx8mn_scratch_space() __imx8m_scratch_space(16)
#define imx8mp_scratch_space() __imx8m_scratch_space(32)
+#define imx8m_load_and_start_optee_via_tfa(soc, bl32, bl33) \
+do { \
+ size_t bl32_size; \
+ void *bl32_image; \
+ \
+ soc##_tzc380_init(); \
+ get_builtin_firmware_ext(soc##_bl32_bin, \
+ bl33, &bl32_image, \
+ &bl32_size); \
+ \
+ memcpy(bl32, bl32_image, bl32_size); \
+ \
+ soc##_load_and_start_tfa(soc##_bl31_bin_optee); \
+} while (0)
+
#endif /* __MACH_XLOAD_H */
diff --git a/firmware/.gitignore b/firmware/.gitignore
index 4f3e56d8b719..8f9a956eb661 100644
--- a/firmware/.gitignore
+++ b/firmware/.gitignore
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
*.bin
+*.bin-optee
diff --git a/firmware/Kconfig b/firmware/Kconfig
index 1a5e1bf5142a..a12a8f304476 100644
--- a/firmware/Kconfig
+++ b/firmware/Kconfig
@@ -24,6 +24,18 @@ config FIRMWARE_IMX8MP_ATF
config FIRMWARE_IMX8MQ_ATF
bool
+config FIRMWARE_IMX8MM_OPTEE
+ bool "install OP-TEE on i.MX8MM boards"
+ depends on FIRMWARE_IMX8MM_ATF && PBL_OPTEE
+
+config FIRMWARE_IMX8MN_OPTEE
+ bool "install OP-TEE on i.MX8MN boards"
+ depends on FIRMWARE_IMX8MN_ATF && PBL_OPTEE
+
+config FIRMWARE_IMX8MP_OPTEE
+ bool "install OP-TEE on i.MX8MP boards"
+ depends on FIRMWARE_IMX8MP_ATF && PBL_OPTEE
+
config FIRMWARE_CCBV2_OPTEE
bool
depends on MACH_WEBASTO_CCBV2 && PBL_OPTEE
diff --git a/firmware/Makefile b/firmware/Makefile
index da341871d681..984192f030bb 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -12,10 +12,13 @@ firmware-$(CONFIG_FIRMWARE_IMX_DDR4_PMU_TRAIN) += \
ddr4_imem_1d.bin \
ddr4_imem_2d.bin
-firmware-$(CONFIG_FIRMWARE_IMX8MM_ATF) += imx8mm-bl31.bin
-firmware-$(CONFIG_FIRMWARE_IMX8MN_ATF) += imx8mn-bl31.bin
-firmware-$(CONFIG_FIRMWARE_IMX8MP_ATF) += imx8mp-bl31.bin
+firmware-$(CONFIG_FIRMWARE_IMX8MM_ATF) += imx8mm-bl31.bin$(if $(CONFIG_FIRMWARE_IMX8MM_OPTEE),-optee,)
+firmware-$(CONFIG_FIRMWARE_IMX8MN_ATF) += imx8mn-bl31.bin$(if $(CONFIG_FIRMWARE_IMX8MN_OPTEE),-optee,)
+firmware-$(CONFIG_FIRMWARE_IMX8MP_ATF) += imx8mp-bl31.bin$(if $(CONFIG_FIRMWARE_IMX8MP_OPTEE),-optee,)
firmware-$(CONFIG_FIRMWARE_IMX8MQ_ATF) += imx8mq-bl31.bin
+fw-external-$(CONFIG_FIRMWARE_IMX8MM_OPTEE) += imx8mm-bl32.bin
+fw-external-$(CONFIG_FIRMWARE_IMX8MN_OPTEE) += imx8mn-bl32.bin
+fw-external-$(CONFIG_FIRMWARE_IMX8MP_OPTEE) += imx8mp-bl32.bin
firmware-$(CONFIG_ARCH_RK3568) += rk3568-bl31.bin
firmware-$(CONFIG_ARCH_RK3568_OPTEE) += rk3568-op-tee.bin
firmware-$(CONFIG_ARCH_RK3399) += rk3399-bl31.bin
--
2.30.2
next reply other threads:[~2023-03-07 9:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-07 9:34 Ahmad Fatoum [this message]
2023-03-07 9:34 ` [PATCH 2/4] drivers: implement of_optee_fixup helper function Ahmad Fatoum
2023-03-07 9:34 ` [PATCH 3/4] ARM: i.MX8M: fixup op-tee nodes Ahmad Fatoum
2023-03-07 9:34 ` [PATCH 4/4] drivers: drop unneeded CONFIG_CRYPTO_HW guard Ahmad Fatoum
2023-03-09 11:04 ` [PATCH 1/4] ARM: i.MX8M: add option to install OP-TEE Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230307093426.1551193-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox