From: Sascha Hauer <sha@pengutronix.de>
To: Roland Hieber <rhi@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] Documentation: imx: improve reboot mode section
Date: Tue, 21 Mar 2023 09:13:45 +0100 [thread overview]
Message-ID: <20230321081345.GH7446@pengutronix.de> (raw)
In-Reply-To: <20230320114123.2202362-1-rhi@pengutronix.de>
On Mon, Mar 20, 2023 at 12:41:23PM +0100, Roland Hieber wrote:
> Signed-off-by: Roland Hieber <rhi@pengutronix.de>
> ---
> Documentation/boards/imx.rst | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/Documentation/boards/imx.rst b/Documentation/boards/imx.rst
> index 6c16923340a8..6fbf1554d10e 100644
> --- a/Documentation/boards/imx.rst
> +++ b/Documentation/boards/imx.rst
> @@ -86,8 +86,8 @@ The images can also always be started as second stage on the target:
> BootROM Reboot mode codes (bmode)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> -For select SoCs, barebox supports communicating an alternative boot medium
> -that BootROM should select after a warm reset::
> +For selected SoCs, barebox supports communicating an alternative boot medium
> +that the BootROM should select after a warm reset::
>
> barebox@FSL i.MX8MM EVK board:/ devinfo gpr.reboot_mode
> Driver: syscon-reboot-mode
> @@ -107,10 +107,17 @@ that BootROM should select after a warm reset::
>
> barebox@FSL i.MX8MM EVK board:/ gpr.reboot_mode.next=serial reset -w
>
> -This will cause barebox to fall into serial download mode on an i.MX8MM.
> +The example above will cause barebox to jump back into serial download mode on
> +an i.MX8MM by writing 0x10 into the *SRC_GPR9* register (offset 0x30390094) and
> +0x40000000 into the *SRC_GPR10* register (offset 0x30390098), and then issuing a
> +warm :ref:`reset <command_reset>`.
>
> Different SoCs may have more possible reboot modes available.
> -See the section on :ref:`Reboot modes<reboot_mode>` for more information.
> +Look for documentation of the *SRC_SBMR* and *SRC_GPR* registers in the
> +Reference Manual of your SoC; the values for the ``mode-*`` properties often
> +correspond directly to the boot fusemap settings.
> +
> +See the section on :ref:`Reboot modes<reboot_mode>` for general information.
>
> High Assurance Boot
> ^^^^^^^^^^^^^^^^^^^
> --
> 2.30.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2023-03-21 8:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-20 11:41 Roland Hieber
2023-03-21 8:13 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230321081345.GH7446@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=rhi@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox