Re: [PATCH] ARM: boards: protonic-imx6: fix bbu_handler device paths

[Sascha Hauer <sha@pengutronix.de>]

On Mon, Apr 03, 2023 at 02:25:09PM +0200, Marco Felsch wrote:
> The update handler path must be a full-path starting at '/'. Fix this by
> adding the '/dev/' path prefix.
> 
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
>  arch/arm/boards/protonic-imx6/board.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
> index d2fb25d3cc..0d57f409d2 100644
> --- a/arch/arm/boards/protonic-imx6/board.c
> +++ b/arch/arm/boards/protonic-imx6/board.c
> @@ -530,7 +530,7 @@ static int prt_imx6_bbu(struct prt_imx6_priv *priv)
>  		emmc_flags = BBU_HANDLER_FLAG_DEFAULT;
>  	}
>  
> -	devicefile = basprintf("mmc%d", dcfg->emmc_usdhc);
> +	devicefile = basprintf("/dev/mmc%d", dcfg->emmc_usdhc);
>  	if (!devicefile) {
>  		ret = -ENOMEM;
>  		goto exit_bbu;
> @@ -540,7 +540,7 @@ static int prt_imx6_bbu(struct prt_imx6_priv *priv)
>  	if (ret)
>  		goto exit_bbu;
>  
> -	devicefile = basprintf("mmc%d", dcfg->sd_usdhc);
> +	devicefile = basprintf("/dev/mmc%d", dcfg->sd_usdhc);
>  	if (!devicefile) {
>  		ret = -ENOMEM;
>  		goto exit_bbu;
> -- 
> 2.39.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |