From: Sascha Hauer <sha@pengutronix.de>
To: Jules Maselbas <jmaselbas@zdiv.net>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 11/13] ARM: boards: sunxi: Add initial support for the pinephone
Date: Tue, 30 May 2023 10:42:36 +0200 [thread overview]
Message-ID: <20230530084236.GY17518@pengutronix.de> (raw)
In-Reply-To: <20230524234328.82741-12-jmaselbas@zdiv.net>
On Thu, May 25, 2023 at 01:43:26AM +0200, Jules Maselbas wrote:
> Signed-off-by: Jules Maselbas <jmaselbas@zdiv.net>
> ---
> arch/arm/boards/Makefile | 1 +
> arch/arm/boards/pine64-pinephone/Makefile | 2 +
> arch/arm/boards/pine64-pinephone/board.c | 0
> arch/arm/boards/pine64-pinephone/lowlevel.c | 104 ++++++++++++++++++++
> arch/arm/configs/pinephone_defconfig | 12 +++
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-a64-pinephone-1_2.dts | 3 +
> arch/arm/mach-sunxi/Kconfig | 17 ++++
> images/Makefile.sunxi | 9 ++
> include/mach/sunxi/init.h | 4 +
> 10 files changed, 153 insertions(+)
> create mode 100644 arch/arm/boards/pine64-pinephone/Makefile
> create mode 100644 arch/arm/boards/pine64-pinephone/board.c
> create mode 100644 arch/arm/boards/pine64-pinephone/lowlevel.c
> create mode 100644 arch/arm/configs/pinephone_defconfig
> create mode 100644 arch/arm/dts/sun50i-a64-pinephone-1_2.dts
>
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index b204c257f6..f4796f5374 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -96,6 +96,7 @@ obj-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += phytec-som-imx6/
> obj-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += phytec-phycore-imx7/
> obj-$(CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1) += phytec-phycore-stm32mp1/
> obj-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ) += phytec-som-imx8mq/
> +obj-$(CONFIG_MACH_PINE64_PINEPHONE) += pine64-pinephone/
> obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += plathome-openblocks-ax3/
> obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += plathome-openblocks-a6/
> obj-$(CONFIG_MACH_PM9261) += pm9261/
> diff --git a/arch/arm/boards/pine64-pinephone/Makefile b/arch/arm/boards/pine64-pinephone/Makefile
> new file mode 100644
> index 0000000000..092c31d6b2
> --- /dev/null
> +++ b/arch/arm/boards/pine64-pinephone/Makefile
> @@ -0,0 +1,2 @@
> +lwl-y += lowlevel.o
> +obj-y += board.o
> diff --git a/arch/arm/boards/pine64-pinephone/board.c b/arch/arm/boards/pine64-pinephone/board.c
> new file mode 100644
> index 0000000000..e69de29bb2
> diff --git a/arch/arm/boards/pine64-pinephone/lowlevel.c b/arch/arm/boards/pine64-pinephone/lowlevel.c
> new file mode 100644
> index 0000000000..262d194864
> --- /dev/null
> +++ b/arch/arm/boards/pine64-pinephone/lowlevel.c
> @@ -0,0 +1,104 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <common.h>
> +#include <debug_ll.h>
> +#include <linux/sizes.h>
> +#include <linux/bitops.h>
> +#include <mach/sunxi/barebox-arm.h>
This file is missing in this series. Forgot to git add it?
> +#include <mach/sunxi/init.h>
> +#include <mach/sunxi/xload.h>
> +#include <mach/sunxi/egon.h>
> +#include <mach/sunxi/rmr_switch.h>
> +#include <mach/sunxi/sun50i-regs.h>
> +#include <mach/sunxi/sunxi-pinctrl.h>
> +
> +#ifdef DEBUG
> +static void debug_led_rgb(int rgb)
> +{
> + void __iomem *piobase = SUN50I_PIO_BASE_ADDR;
> + uint32_t clr, set = 0;
> + int r = rgb & 0xff0000;
> + int g = rgb & 0x00ff00;
> + int b = rgb & 0x0000ff;
> +
> + clr = (1 << 19) | (1 << 18) | (1 << 20);
> + set |= r ? 1 << 19 : 0;
> + set |= g ? 1 << 18 : 0;
> + set |= b ? 1 << 20 : 0;
> +
> + clrsetbits_le32(piobase + PIO_PD_DATA, clr, set);
> +}
> +
> +static void debug_led_init(void)
> +{
> + void __iomem *ccubase = SUN50I_CCU_BASE_ADDR;
> + void __iomem *piobase = SUN50I_PIO_BASE_ADDR;
> +
> + /* PIO clock enable */
> + setbits_le32(ccubase + CCU_BUS_CLK_GATE2, BIT(5));
> + /* LED set output */
> + clrsetbits_le32(piobase + PIO_PD_CFG2, 0x000fff00, 0x00011100);
> +}
> +#else
> +static void debug_led_rgb(int rgb) {}
> +static void debug_led_init(void) {}
> +#endif
> +
> +SUN50I_A64_ENTRY_FUNCTION(start_pine64_pinephone, r0, r1, r2)
> +{
> + extern char __dtb_z_sun50i_a64_pinephone_1_2_start[];
> + void *fdt;
> + u32 size;
> +
> + sunxi_switch_to_aarch64(.text_head_soc_header2, SUN50I_A64_RVBAR_IOMAP);
> +
> + debug_led_init();
> + debug_led_rgb(0xffff00);
> +
> + sun50i_cpu_lowlevel_init();
> + sun50i_uart_setup();
> +
> + relocate_to_current_adr();
> + setup_c();
> +
> + /* Skip SDRAM initialization if we run from it */
> + if (get_pc() < SUN50I_DRAM_ADDR) {
> + size = sun50i_a64_lpddr3_dram_init();
> + if (size == 0) {
> + puts_ll("FAIL: dram init\r\n");
> + goto reset;
> + }
> + puthex_ll(size);
> + putc_ll('\r'); putc_ll('\n');
> + }
How can we get here with SDRAM uninitialized? Is this for USB or JTAG
boot?
> +
> + puts_ll("now booting\r\n");
> + fdt = __dtb_z_sun50i_a64_pinephone_1_2_start + get_runtime_offset();
> + barebox_arm_entry(SUN50I_DRAM_ADDR, SZ_1G, fdt);
> +
> +reset:
> + debug_led_rgb(0xff0000);
> + sun50i_cpu_lowlevel_reset();
> +}
> +
> +SUN50I_A64_ENTRY_FUNCTION(start_pine64_pinephone_xload, r0, r1, r2)
> +{
> +
> + sunxi_egon_header(.text_head_soc_header0);
> + sunxi_switch_to_aarch64(.text_head_soc_header1, SUN50I_A64_RVBAR_IOMAP);
> +
> + debug_led_init();
> + debug_led_rgb(0xff0000);
> +
> + sun50i_cpu_lowlevel_init();
> + sun50i_uart_setup();
> + debug_led_rgb(0xffff00);
> +
> + relocate_to_current_adr();
> + setup_c();
> +
> + sun50i_a64_lpddr3_dram_init();
> +
> + debug_led_rgb(0xff0000);
> +
You would have to place code here to continue booting, right? In that
case you should add a comment to let the reader know that there's
something missing here.
debug_led_rgb(0xff0000) is the same color you used at the beginning of
the function. Would it make more sense to use a different color?
> + sun50i_cpu_lowlevel_reset();
Maybe hang() here instead to give the user a chance to see the last
color?
> +}
> diff --git a/arch/arm/configs/pinephone_defconfig b/arch/arm/configs/pinephone_defconfig
In the hope that the config is not only suitable for the pinephone
better name it sunxi_v8_defconfig.
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -1,7 +1,24 @@
> if ARCH_SUNXI
>
> +config ARCH_SUN50I_A64
> + bool
> + select CPU_V8
> + select CPU_SUPPORTS_64BIT_KERNEL
> + select CLOCKSOURCE_ARM_ARCHITECTED_TIMER
> + select PINCTRL_SUN50I_A64
> + select HAS_DEBUG_LL
> + select PBL_RELOCATABLE
> + select PBL_FULLY_PIC
> + help
> + Allwiner A64 (sun50iw1) SoC
s/Allwiner/Allwinner/
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2023-05-30 8:43 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-24 23:43 [PATCH v2 00/13] Add support for Allwinner (sunxi) A64 SoC Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 01/13] Documentation: sunxi: Add some documentation Jules Maselbas
2023-05-29 9:24 ` Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 02/13] scripts: Add Allwinner eGON image support Jules Maselbas
2023-06-16 22:00 ` Marco Felsch
2023-06-17 7:25 ` Jules Maselbas
2023-06-20 4:52 ` Marco Felsch
2023-06-21 8:26 ` Sascha Hauer
2023-05-24 23:43 ` [PATCH v2 03/13] ARM: sunxi: introduce mach-sunxi Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 04/13] ARM: lds: Add SoC specific sections to go before .text_head_prologue Jules Maselbas
2023-06-01 6:34 ` Ahmad Fatoum
2023-06-01 21:20 ` Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 05/13] ARM: sunxi: Add lowlevel switch to aarch64 Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 06/13] ARM: sunxi: Add debug_ll Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 07/13] clk: Add clock driver for sun50i-a64 Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 08/13] pinctrl: Add sun50i-a64 pinctrl driver Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 09/13] mci: Add sunxi-mmc driver Jules Maselbas
2023-05-30 8:14 ` Sascha Hauer
2023-06-01 6:15 ` Jules Maselbas
2023-06-01 8:35 ` Sascha Hauer
2023-05-24 23:43 ` [PATCH v2 10/13] ARM: sunxi: Add sun50i SDRAM init Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 11/13] ARM: boards: sunxi: Add initial support for the pinephone Jules Maselbas
2023-05-30 8:42 ` Sascha Hauer [this message]
2023-06-01 5:50 ` Jules Maselbas
2023-06-01 6:00 ` Ahmad Fatoum
2023-06-01 6:19 ` Jules Maselbas
2023-06-01 6:36 ` Ahmad Fatoum
2023-06-01 7:09 ` Ahmad Fatoum
2023-05-24 23:43 ` [PATCH v2 12/13] ARM: boards: sunxi: Add pine64 board Jules Maselbas
2023-05-24 23:43 ` [PATCH v2 13/13] ARM: sunxi: xload: Add helpers for chain-loading from SD-card Jules Maselbas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230530084236.GY17518@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=jmaselbas@zdiv.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox