From: yegorslists@googlemail.com
To: barebox@lists.infradead.org
Subject: [PATCH] net: phy: add driver for MotorComm PHY
Date: Wed, 31 May 2023 16:35:00 +0200 [thread overview]
Message-ID: <20230531143500.165837-1-yegorslists@googlemail.com> (raw)
From: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
drivers/net/phy/Kconfig | 5 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/motorcomm.c | 128 ++++++++++++++++++++++++++++++++++++
3 files changed, 134 insertions(+)
create mode 100644 drivers/net/phy/motorcomm.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index cd20e1de27..e95e2a3228 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -50,6 +50,11 @@ config MICREL_PHY
help
Supports the KSZ9021, VSC8201, KS8001 PHYs.
+config MOTORCOMM_PHY
+ bool "Driver for Motorcomm PHYs"
+ help
+ Currently supports the YT8511 PHY.
+
config NATIONAL_PHY
bool "Driver for National Semiconductor PHYs"
help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 83f46f11d3..26e4ad884d 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_DAVICOM_PHY) += davicom.o
obj-$(CONFIG_LXT_PHY) += lxt.o
obj-$(CONFIG_MARVELL_PHY) += marvell.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
+obj-$(CONFIG_MOTORCOMM_PHY) += motorcomm.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_SMSC_PHY) += smsc.o
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
new file mode 100644
index 0000000000..4bcd84342c
--- /dev/null
+++ b/drivers/net/phy/motorcomm.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * drivers/net/phy/motorcomm.c
+ *
+ * Driver for Motorcomm PHYs
+ *
+ * Author: Peter Geis <pgwipeout@gmail.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/phy.h>
+#include <linux/mdio.h>
+
+#define PHY_ID_YT8511 0x0000010a
+
+#define YT8511_PAGE_SELECT 0x1e
+#define YT8511_PAGE 0x1f
+#define YT8511_EXT_CLK_GATE 0x0c
+#define YT8511_EXT_DELAY_DRIVE 0x0d
+#define YT8511_EXT_SLEEP_CTRL 0x27
+
+/* 2b00 25m from pll
+ * 2b01 25m from xtl *default*
+ * 2b10 62.m from pll
+ * 2b11 125m from pll
+ */
+#define YT8511_CLK_125M (BIT(2) | BIT(1))
+#define YT8511_PLLON_SLP BIT(14)
+
+/* RX Delay enabled = 1.8ns 1000T, 8ns 10/100T */
+#define YT8511_DELAY_RX BIT(0)
+
+/* TX Gig-E Delay is bits 7:4, default 0x5
+ * TX Fast-E Delay is bits 15:12, default 0xf
+ * Delay = 150ps * N - 250ps
+ * On = 2000ps, off = 50ps
+ */
+#define YT8511_DELAY_GE_TX_EN (0xf << 4)
+#define YT8511_DELAY_GE_TX_DIS (0x2 << 4)
+#define YT8511_DELAY_FE_TX_EN (0xf << 12)
+#define YT8511_DELAY_FE_TX_DIS (0x2 << 12)
+
+static int yt8511_read_page(struct phy_device *phydev)
+{
+ return phy_read(phydev, YT8511_PAGE_SELECT);
+};
+
+static int yt8511_write_page(struct phy_device *phydev, int page)
+{
+ return phy_write(phydev, YT8511_PAGE_SELECT, page);
+};
+
+static int yt8511_config_init(struct phy_device *phydev)
+{
+ int oldpage, ret = 0;
+ unsigned int ge, fe;
+
+ oldpage = phy_select_page(phydev, YT8511_EXT_CLK_GATE);
+ if (oldpage < 0)
+ goto err_restore_page;
+
+ /* set rgmii delay mode */
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ ge = YT8511_DELAY_GE_TX_DIS;
+ fe = YT8511_DELAY_FE_TX_DIS;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_DIS;
+ fe = YT8511_DELAY_FE_TX_DIS;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ ge = YT8511_DELAY_GE_TX_EN;
+ fe = YT8511_DELAY_FE_TX_EN;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN;
+ fe = YT8511_DELAY_FE_TX_EN;
+ break;
+ default: /* do not support other modes */
+ ret = -EOPNOTSUPP;
+ goto err_restore_page;
+ }
+
+ ret = phy_modify(phydev, YT8511_PAGE, (YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN), ge);
+ if (ret < 0)
+ goto err_restore_page;
+
+ /* set clock mode to 125mhz */
+ ret = phy_modify(phydev, YT8511_PAGE, 0, YT8511_CLK_125M);
+ if (ret < 0)
+ goto err_restore_page;
+
+ /* fast ethernet delay is in a separate page */
+ ret = phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_DELAY_DRIVE);
+ if (ret < 0)
+ goto err_restore_page;
+
+ ret = phy_modify(phydev, YT8511_PAGE, YT8511_DELAY_FE_TX_EN, fe);
+ if (ret < 0)
+ goto err_restore_page;
+
+ /* leave pll enabled in sleep */
+ ret = phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_SLEEP_CTRL);
+ if (ret < 0)
+ goto err_restore_page;
+
+ ret = phy_modify(phydev, YT8511_PAGE, 0, YT8511_PLLON_SLP);
+ if (ret < 0)
+ goto err_restore_page;
+
+err_restore_page:
+ return phy_restore_page(phydev, oldpage, ret);
+}
+
+static struct phy_driver motorcomm_phy_drvs[] = {
+ {
+ .phy_id = PHY_ID_YT8511,
+ .drv.name = "YT8511 Gigabit Ethernet",
+ .config_init = yt8511_config_init,
+ .features = PHY_GBIT_FEATURES,
+ .read_page = yt8511_read_page,
+ .write_page = yt8511_write_page,
+ },
+};
+
+device_phy_drivers(motorcomm_phy_drvs);
--
2.34.1
next reply other threads:[~2023-05-31 14:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-31 14:35 yegorslists [this message]
2023-06-01 8:17 ` Sascha Hauer
2023-06-01 8:51 ` Yegor Yefremov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230531143500.165837-1-yegorslists@googlemail.com \
--to=yegorslists@googlemail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox