From: Sascha Hauer <sha@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2] test: self: add basic regulator selftest
Date: Tue, 13 Jun 2023 09:56:11 +0200 [thread overview]
Message-ID: <20230613075611.GL18491@pengutronix.de> (raw)
In-Reply-To: <20230612125544.1085413-1-a.fatoum@pengutronix.de>
On Mon, Jun 12, 2023 at 02:55:44PM +0200, Ahmad Fatoum wrote:
> This simple test verifies registration and always-on enabling and disabling
> work as they should. It may be extended in future to support more
> complex cases.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> v1 -> v2:
> - add select on OF_OVERLAY (Sascha)
> - reorder regulators, so test succeeds
> ---
> test/self/Kconfig | 7 +-
> test/self/Makefile | 1 +
> test/self/regulator.c | 188 ++++++++++++++++++++++++++++++++++
> test/self/test_regulator.dtso | 43 ++++++++
> 4 files changed, 238 insertions(+), 1 deletion(-)
> create mode 100644 test/self/regulator.c
> create mode 100644 test/self/test_regulator.dtso
Applied, thanks
Sascha
>
> diff --git a/test/self/Kconfig b/test/self/Kconfig
> index dcbfa85896f7..a4176ab8ffd6 100644
> --- a/test/self/Kconfig
> +++ b/test/self/Kconfig
> @@ -38,9 +38,9 @@ config SELFTEST_ENABLE_ALL
> imply SELFTEST_JSON
> imply SELFTEST_DIGEST
> imply SELFTEST_MMU
> - imply SELFTEST_REGULATOR
> imply SELFTEST_STRING
> imply SELFTEST_SETJMP
> + imply SELFTEST_REGULATOR
> help
> Selects all self-tests compatible with current configuration
>
> @@ -92,4 +92,9 @@ config SELFTEST_SETJMP
> bool "setjmp/longjmp library selftest"
> depends on ARCH_HAS_SJLJ
>
> +config SELFTEST_REGULATOR
> + bool "Regulator selftest"
> + depends on REGULATOR && OFDEVICE
> + select OF_OVERLAY
> +
> endif
> diff --git a/test/self/Makefile b/test/self/Makefile
> index b6f4395147dd..080ef303cc35 100644
> --- a/test/self/Makefile
> +++ b/test/self/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_SELFTEST_DIGEST) += digest.o
> obj-$(CONFIG_SELFTEST_MMU) += mmu.o
> obj-$(CONFIG_SELFTEST_STRING) += string.o
> obj-$(CONFIG_SELFTEST_SETJMP) += setjmp.o
> +obj-$(CONFIG_SELFTEST_REGULATOR) += regulator.o test_regulator.dtbo.o
>
> clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts *.dtb.z
> clean-files += *.dtbo *.dtbo.S .*.dtso
> diff --git a/test/self/regulator.c b/test/self/regulator.c
> new file mode 100644
> index 000000000000..e89164700ef1
> --- /dev/null
> +++ b/test/self/regulator.c
> @@ -0,0 +1,188 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <common.h>
> +#include <bselftest.h>
> +#include <driver.h>
> +#include <of.h>
> +#include <regulator.h>
> +#include <linux/regulator/of_regulator.h>
> +
> +struct test_regulator {
> + struct device *dev;
> +};
> +
> +struct test_regulator_cfg {
> + struct regulator_desc desc;
> + struct regulator_dev rdev;
> +};
> +
> +BSELFTEST_GLOBALS();
> +
> +static bool __ok(bool cond, const char *func, int line)
> +{
> + total_tests++;
> + if (!cond) {
> + failed_tests++;
> + printf("%s:%d: assertion failure\n", func, line);
> + return false;
> + }
> +
> + return true;
> +}
> +
> +#define ok(cond) \
> + __ok(cond, __func__, __LINE__)
> +
> +static void test_regulator_selfref_always_on(struct device *dev)
> +{
> + ok(1 == 1);
> +}
> +
> +static int test_regulator_enable_noop(struct regulator_dev *rdev)
> +{
> + dev_dbg(rdev->dev, "enabling %s-supply\n", rdev->desc->supply_name);
> + failed_tests--;
> + return 0;
> +}
> +
> +static int test_regulator_disable_noop(struct regulator_dev *rdev)
> +{
> + dev_dbg(rdev->dev, "disabling %s-supply\n", rdev->desc->supply_name);
> + failed_tests--;
> + return 0;
> +}
> +
> +static const struct regulator_ops test_regulator_ops_range = {
> + .enable = test_regulator_enable_noop,
> + .disable = test_regulator_disable_noop,
> +};
> +
> +enum {
> + /*
> + * Ordering LDO1 before TEST_BUCK currently fails. This needs to be fixed
> + */
> + TEST_BUCK,
> + TEST_LDO1,
> + TEST_LDO2,
> + TEST_REGULATORS_NUM
> +};
> +
> +static struct test_regulator_cfg test_pmic_reg[] = {
> + [TEST_BUCK] = {{
> + .supply_name = "buck",
> + .ops = &test_regulator_ops_range,
> + }},
> + [TEST_LDO1] = {{
> + .supply_name = "ldo1",
> + .ops = &test_regulator_ops_range,
> + }},
> + [TEST_LDO2] = {{
> + .supply_name = "ldo2",
> + .ops = &test_regulator_ops_range,
> + }},
> +};
> +
> +static struct of_regulator_match test_reg_matches[] = {
> + [TEST_BUCK] = { .name = "BUCK", .desc = &test_pmic_reg[TEST_BUCK].desc },
> + [TEST_LDO1] = { .name = "LDO1", .desc = &test_pmic_reg[TEST_LDO1].desc },
> + [TEST_LDO2] = { .name = "LDO2", .desc = &test_pmic_reg[TEST_LDO2].desc },
> +};
> +
> +static int test_regulator_register(struct test_regulator *priv, int id,
> + struct of_regulator_match *match,
> + struct test_regulator_cfg *cfg)
> +{
> + struct device *dev = priv->dev;
> + int ret;
> +
> + if (!match->of_node) {
> + dev_warn(dev, "Skip missing DTB regulator %s\n", match->name);
> + return 0;
> + }
> +
> + cfg->rdev.desc = &cfg->desc;
> + cfg->rdev.dev = dev;
> +
> + dev_dbg(dev, "registering %s\n", match->name);
> +
> + ret = of_regulator_register(&cfg->rdev, match->of_node);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to register %s regulator\n",
> + match->name);
> +
> + return 0;
> +}
> +
> +static int regulator_probe(struct device *dev)
> +{
> + size_t nregulators = ARRAY_SIZE(test_pmic_reg);
> + struct device_node *np = dev->of_node;
> + struct test_regulator *priv;
> + int ret, i;
> +
> + priv = xzalloc(sizeof(*priv));
> + priv->dev = dev;
> +
> + total_tests += 2;
> + failed_tests += 2;
> +
> + np = of_get_child_by_name(np, "regulators");
> + if (!np)
> + return -ENOENT;
> +
> + ret = of_regulator_match(dev, np, test_reg_matches, nregulators);
> + if (ret < 0)
> + return ret;
> +
> + ok(ret == TEST_REGULATORS_NUM);
> +
> + for (i = 0; i < nregulators; i++) {
> + ret = test_regulator_register(priv, i, &test_reg_matches[i],
> + &test_pmic_reg[i]);
> + ok(ret == 0);
> + if (ret < 0)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id test_regulator_of_match[] = {
> + { .compatible = "barebox,regulator-self-test" },
> + { /* sentintel */ },
> +};
> +MODULE_DEVICE_TABLE(of, test_regulator_of_match);
> +
> +static struct driver regulator_test_driver = {
> + .name = "regulator-test",
> + .probe = regulator_probe,
> + .of_match_table = test_regulator_of_match,
> +};
> +
> +static struct device_d *dev;
> +
> +static void test_regulator(void)
> +{
> + extern char __dtbo_test_regulator_start[];
> + struct device_node *overlay;
> + int ret;
> +
> + if (!dev) {
> + ret = platform_driver_register(®ulator_test_driver);
> + if (ret)
> + return;
> +
> + overlay = of_unflatten_dtb(__dtbo_test_regulator_start, INT_MAX);
> + of_overlay_apply_tree(of_get_root_node(), overlay);
> + of_probe();
> +
> + dev = of_find_device_by_node_path("/regulator-self-test-pmic");
> +
> + ok(dev->driver != NULL);
> + }
> +
> + test_regulator_selfref_always_on(dev);
> +}
> +bselftest(core, test_regulator);
> diff --git a/test/self/test_regulator.dtso b/test/self/test_regulator.dtso
> new file mode 100644
> index 000000000000..65d2b130988d
> --- /dev/null
> +++ b/test/self/test_regulator.dtso
> @@ -0,0 +1,43 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +&{/} {
> + regulator_test_fixed: regulator-self-test-fixed {
> + compatible = "regulator-fixed";
> + regulator-name = "test_fixed";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + regulator-self-test-pmic {
> + compatible = "barebox,regulator-self-test";
> +
> + buck-supply = <®ulator_test_fixed>;
> + ldo1-supply = <&test_pmic_buck>;
> + ldo2-supply = <&test_pmic_buck>;
> +
> + regulators {
> + test_pmic_buck: BUCK {
> + regulator-name = "buck";
> + regulator-min-microvolt = <330000>;
> + regulator-max-microvolt = <330000>;
> + };
> +
> + test_pmic_ldo1: LDO1 {
> + regulator-name = "ldo1";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <180000>;
> + regulator-max-microvolt = <180000>;
> + };
> +
> + test_pmic_ldo2: LDO2 {
> + regulator-name = "ldo2";
> + regulator-min-microvolt = <180000>;
> + regulator-max-microvolt = <180000>;
> + };
> + };
> + };
> +};
> --
> 2.39.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2023-06-13 7:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-12 12:55 Ahmad Fatoum
2023-06-13 7:56 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230613075611.GL18491@pengutronix.de \
--to=sha@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox