From: Marco Felsch <m.felsch@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 05/10] gpiolib: export proper gpio descriptor API
Date: Tue, 20 Jun 2023 07:20:45 +0200 [thread overview]
Message-ID: <20230620052045.deruonvmw3sq42is@pengutronix.de> (raw)
In-Reply-To: <20230614135452.1884124-6-a.fatoum@pengutronix.de>
Hi Ahmad,
thanks a lot for this patchset, please see my comments below.
On 23-06-14, Ahmad Fatoum wrote:
> Our current gpiod API doesn't return actual struct gpio_desc pointers
> that can be dereferenced by the GPIO core, like in Linux. We actually
> have all the infrastructure in place to do that, but we just aren't
> using this yet. Rename the relevant gpioinfo_ functions to gpiod_,
> document them, export them and have them observe the same semantics as
> their Linux equivalents.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> drivers/gpio/gpiolib.c | 173 ++++++++++++++++++++++++++++++----
> include/linux/gpio/consumer.h | 62 ++----------
> 2 files changed, 163 insertions(+), 72 deletions(-)
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index 402d408be071..25d91d250dc8 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -21,6 +21,36 @@ struct gpio_desc {
> const char *name;
> };
>
> +/*
> + * This descriptor validation needs to be inserted verbatim into each
> + * function taking a descriptor, so we need to use a preprocessor
> + * macro to avoid endless duplication. If the desc is NULL it is an
> + * optional GPIO and calls should just bail out.
> + */
> +static int validate_desc(const struct gpio_desc *desc, const char *func)
> +{
> + if (!desc)
> + return 0;
> + if (IS_ERR(desc)) {
> + pr_warn("%s: invalid GPIO (errorpointer)\n", func);
> + return PTR_ERR(desc);
> + }
> +
> + return 1;
> +}
> +
> +#define VALIDATE_DESC(desc) do { \
> + int __valid = validate_desc(desc, __func__); \
> + if (__valid <= 0) \
> + return __valid; \
> + } while (0)
> +
> +#define VALIDATE_DESC_VOID(desc) do { \
> + int __valid = validate_desc(desc, __func__); \
> + if (__valid <= 0) \
> + return; \
> + } while (0)
> +
> static struct gpio_desc *gpio_desc;
>
> static int gpio_desc_alloc(void)
> @@ -50,12 +80,12 @@ static struct gpio_desc *gpio_to_desc(unsigned gpio)
> return NULL;
> }
>
> -static unsigned gpioinfo_chip_offset(struct gpio_desc *desc)
> +static unsigned gpioinfo_chip_offset(const struct gpio_desc *desc)
Why do we stick with gpioinfo_* here? IMHO we could use
gpiodesc_chip_offset() since the gpioinfo is gone.
> {
> return (desc - gpio_desc) - desc->chip->base;
> }
>
> -static int gpio_adjust_value(struct gpio_desc *desc,
> +static int gpio_adjust_value(const struct gpio_desc *desc,
> int value)
> {
> if (value < 0)
> @@ -159,17 +189,40 @@ void gpio_free(unsigned gpio)
> {
> struct gpio_desc *desc = gpio_to_desc(gpio);
>
> + gpioinfo_free(desc);
Same for gpioinfo_free() which could become gpiodesc_free().
> +}
> +
> +/**
> + * gpiod_put - dispose of a GPIO descriptor
> + * @desc: GPIO descriptor to dispose of
> + *
> + * No descriptor can be used after gpiod_put() has been called on it.
> + */
> +void gpiod_put(struct gpio_desc *desc)
> +{
> if (!desc)
> return;
>
> gpioinfo_free(desc);
> }
> +EXPORT_SYMBOL(gpiod_put);
>
> -static void gpioinfo_set_value(struct gpio_desc *desc, int value)
> +/**
> + * gpiod_set_raw_value() - assign a gpio's raw value
> + * @desc: gpio whose value will be assigned
> + * @value: value to assign
> + *
> + * Set the raw value of the GPIO, i.e. the value of its physical line without
> + * regard for its ACTIVE_LOW status.
> + */
> +void gpiod_set_raw_value(struct gpio_desc *desc, int value)
> {
> + VALIDATE_DESC_VOID(desc);
> +
> if (desc->chip->ops->set)
> desc->chip->ops->set(desc->chip, gpioinfo_chip_offset(desc), value);
> }
> +EXPORT_SYMBOL(gpiod_set_raw_value);
>
> void gpio_set_value(unsigned gpio, int value)
> {
> @@ -181,10 +234,25 @@ void gpio_set_value(unsigned gpio, int value)
> if (gpio_ensure_requested(desc, gpio))
> return;
>
> - gpioinfo_set_value(desc, value);
> + gpiod_set_raw_value(desc, value);
> }
> EXPORT_SYMBOL(gpio_set_value);
>
> +/**
> + * gpiod_set_value() - assign a gpio's value
> + * @desc: gpio whose value will be assigned
> + * @value: value to assign
> + *
> + * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW,
> + * OPEN_DRAIN and OPEN_SOURCE flags into account.
> + */
> +void gpiod_set_value(struct gpio_desc *desc, int value)
> +{
> + VALIDATE_DESC_VOID(desc);
> + gpiod_set_raw_value(desc, gpio_adjust_value(desc, value));
> +}
> +EXPORT_SYMBOL_GPL(gpiod_set_value);
> +
> void gpio_set_active(unsigned gpio, bool value)
> {
> struct gpio_desc *desc = gpio_to_desc(gpio);
> @@ -192,17 +260,27 @@ void gpio_set_active(unsigned gpio, bool value)
> if (!desc)
> return;
>
> - gpio_set_value(gpio, gpio_adjust_value(desc, value));
> + gpiod_set_value(desc, value);
> }
> EXPORT_SYMBOL(gpio_set_active);
>
> -static int gpioinfo_get_value(struct gpio_desc *desc)
> +/**
> + * gpiod_get_raw_value() - return a gpio's raw value
> + * @desc: gpio whose value will be returned
> + *
> + * Return the GPIO's raw value, i.e. the value of the physical line disregarding
> + * its ACTIVE_LOW status, or negative errno on failure.
> + */
> +int gpiod_get_raw_value(const struct gpio_desc *desc)
> {
> + VALIDATE_DESC(desc);
> +
> if (!desc->chip->ops->get)
> return -ENOSYS;
>
> return desc->chip->ops->get(desc->chip, gpioinfo_chip_offset(desc));
> }
> +EXPORT_SYMBOL_GPL(gpiod_get_raw_value);
>
> int gpio_get_value(unsigned gpio)
> {
> @@ -216,10 +294,25 @@ int gpio_get_value(unsigned gpio)
> if (ret)
> return ret;
>
> - return gpioinfo_get_value(desc);
> + return gpiod_get_raw_value(desc);
> }
> EXPORT_SYMBOL(gpio_get_value);
>
> +/**
> + * gpiod_get_value() - return a gpio's value
> + * @desc: gpio whose value will be returned
> + *
> + * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
> + * account, or negative errno on failure.
> + */
> +int gpiod_get_value(const struct gpio_desc *desc)
> +{
> + VALIDATE_DESC(desc);
> +
> + return gpio_adjust_value(desc, gpiod_get_raw_value(desc));
> +}
> +EXPORT_SYMBOL_GPL(gpiod_get_value);
> +
> int gpio_is_active(unsigned gpio)
> {
> struct gpio_desc *desc = gpio_to_desc(gpio);
> @@ -227,18 +320,32 @@ int gpio_is_active(unsigned gpio)
> if (!desc)
> return -ENODEV;
>
> - return gpio_adjust_value(desc, gpio_get_value(gpio));
> + return gpiod_get_value(desc);
> }
> EXPORT_SYMBOL(gpio_is_active);
>
> -static int gpioinfo_direction_output(struct gpio_desc *desc, int value)
> +/**
> + * gpiod_direction_output_raw - set the GPIO direction to output
> + * @desc: GPIO to set to output
> + * @value: initial output value of the GPIO
> + *
> + * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
> + * be called safely on it. The initial value of the output must be specified
> + * as raw value on the physical line without regard for the ACTIVE_LOW status.
> + *
> + * Return 0 in case of success, else an error code.
> + */
> +int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
> {
> + VALIDATE_DESC(desc);
> +
> if (!desc->chip->ops->direction_output)
> return -ENOSYS;
>
> return desc->chip->ops->direction_output(desc->chip,
> gpioinfo_chip_offset(desc), value);
> }
> +EXPORT_SYMBOL(gpiod_direction_output_raw);
>
> int gpio_direction_output(unsigned gpio, int value)
> {
> @@ -252,13 +359,27 @@ int gpio_direction_output(unsigned gpio, int value)
> if (ret)
> return ret;
>
> - return gpioinfo_direction_output(desc, value);
> + return gpiod_direction_output_raw(desc, value);
> }
> EXPORT_SYMBOL(gpio_direction_output);
This function should be deleted since we don't support the global 'int'
gpio anymore.
> -static int gpioinfo_direction_active(struct gpio_desc *desc, bool value)
> +/**
> + * gpiod_direction_output - set the GPIO direction to output
> + * @desc: GPIO to set to output
> + * @value: initial output value of the GPIO
> + *
> + * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
> + * be called safely on it. The initial value of the output must be specified
> + * as the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
> + * account.
> + *
> + * Return 0 in case of success, else an error code.
> + */
> +int gpiod_direction_output(struct gpio_desc *desc, int value)
> {
> - return gpioinfo_direction_output(desc, gpio_adjust_value(desc, value));
> + VALIDATE_DESC(desc);
> +
> + return gpiod_direction_output_raw(desc, gpio_adjust_value(desc, value));
> }
>
> int gpio_direction_active(unsigned gpio, bool value)
> @@ -268,18 +389,30 @@ int gpio_direction_active(unsigned gpio, bool value)
> if (!desc)
> return -ENODEV;
>
> - return gpioinfo_direction_active(desc, value);
> + return gpiod_direction_output(desc, value);
> }
> EXPORT_SYMBOL(gpio_direction_active);
>
> -static int gpioinfo_direction_input(struct gpio_desc *desc)
> +/**
> + * gpiod_direction_input - set the GPIO direction to input
> + * @desc: GPIO to set to input
> + *
> + * Set the direction of the passed GPIO to input, such as gpiod_get_value() can
> + * be called safely on it.
> + *
> + * Return 0 in case of success, else an error code.
> + */
> +int gpiod_direction_input(struct gpio_desc *desc)
> {
> + VALIDATE_DESC(desc);
> +
> if (!desc->chip->ops->direction_input)
> return -ENOSYS;
>
> return desc->chip->ops->direction_input(desc->chip,
> gpioinfo_chip_offset(desc));
> }
> +EXPORT_SYMBOL(gpiod_direction_input);
>
> int gpio_direction_input(unsigned gpio)
> {
> @@ -293,7 +426,7 @@ int gpio_direction_input(unsigned gpio)
> if (ret)
> return ret;
>
> - return gpioinfo_direction_input(desc);
> + return gpiod_direction_input(desc);
> }
> EXPORT_SYMBOL(gpio_direction_input);
gpio_direction_input should be deleted as well?
Regards,
Marco
next prev parent reply other threads:[~2023-06-20 5:22 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-14 13:54 [PATCH 00/10] gpio: add proper gpiod API and gpio-mux support Ahmad Fatoum
2023-06-14 13:54 ` [PATCH 01/10] driver: include dev_print and family from <driver.h> Ahmad Fatoum
2023-06-14 13:54 ` [PATCH 02/10] include: linux/printk: define new dev_errp_probe Ahmad Fatoum
2023-06-14 13:54 ` [PATCH 03/10] gpio: have gpiod_ functions return and accept pointers Ahmad Fatoum
2023-06-14 13:54 ` [PATCH 04/10] gpio: gpiolib: rename struct gpio_info to gpio_desc Ahmad Fatoum
2023-06-14 13:54 ` [PATCH 05/10] gpiolib: export proper gpio descriptor API Ahmad Fatoum
2023-06-20 5:20 ` Marco Felsch [this message]
2023-06-20 5:55 ` Ahmad Fatoum
2023-06-20 6:13 ` Marco Felsch
2023-06-20 6:18 ` Ahmad Fatoum
2023-06-14 13:54 ` [PATCH 06/10] bitmap: implement bitmap_{to,from}_arr{32,64} Ahmad Fatoum
2023-06-14 13:54 ` [PATCH 07/10] commands: help: ignore options after first regular argument Ahmad Fatoum
2023-06-14 13:54 ` [PATCH 08/10] gpiolib: factor out finding gpio property Ahmad Fatoum
2023-06-14 13:54 ` [PATCH 09/10] gpiolib: add support for requesting and setting gpiod arrays Ahmad Fatoum
2023-06-14 13:54 ` [PATCH 10/10] drivers: port Linux mux framework and gpio-mux driver Ahmad Fatoum
2023-06-14 15:21 ` Ahmad Fatoum
2023-06-20 5:51 ` [PATCH 00/10] gpio: add proper gpiod API and gpio-mux support Marco Felsch
2023-06-21 9:27 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230620052045.deruonvmw3sq42is@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox