From: Sascha Hauer <sha@pengutronix.de>
To: Holger Assmann <h.assmann@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] mfd: regulator: initial support for pca9450
Date: Wed, 26 Jul 2023 11:40:21 +0200 [thread overview]
Message-ID: <20230726094021.GG18491@pengutronix.de> (raw)
In-Reply-To: <20230724075258.1840671-1-h.assmann@pengutronix.de>
Hi Holger,
On Mon, Jul 24, 2023 at 09:52:58AM +0200, Holger Assmann wrote:
> +++ b/drivers/mfd/pca9450.c
> @@ -0,0 +1,106 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2023 Holger Assmann, Pengutronix
> + */
> +
> +#include <common.h>
> +#include <driver.h>
> +#include <errno.h>
> +#include <i2c/i2c.h>
> +#include <init.h>
> +#include <mfd/pca9450.h>
> +#include <of.h>
> +#include <regmap.h>
> +#include <reset_source.h>
> +
> +#define REASON_PMIC_RST 0x10
> +#define REASON_PWON 0x80
> +#define REASON_SW_RST 0x20
> +#define REASON_WDOG 0x40
Please sort these defines by register bit.
> +
> +static const struct regmap_config pca9450_regmap_i2c_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0x2E,
> +};
> +
> +static int pca9450_get_reset_source(struct device *dev, struct regmap *map)
> +{
> + enum reset_src_type type;
> + int reg;
> + int ret;
> +
> + ret = regmap_read(map, PCA9450_PWRON_STAT, ®);
> + if (ret)
> + return ret;
> +
> + switch (reg) {
> + case REASON_PWON:
> + dev_dbg(dev, "Power ON triggered by PMIC_ON_REQ.\n");
> + type = RESET_POR;
> + break;
> + case REASON_WDOG:
> + dev_dbg(dev, "Detected cold reset by WDOGB pin\n");
> + type = RESET_WDG;
> + break;
> + case REASON_SW_RST:
> + dev_dbg(dev, "Detected cold reset by SW_RST\n");
> + type = RESET_RST;
> + break;
> + case REASON_PMIC_RST:
> + dev_dbg(dev, "Detected cold reset by PMIC_RST_B\n");
> + type = RESET_EXT;
> + break;
> + default:
> + dev_warn(dev, "Could not determine reset reason.\n");
> + type = RESET_UKWN;
> + }
Coding style is to align the 'case' directly under 'switch'.
> +
> + reset_source_set_device(dev, type);
> +
> + return 0;
> +};
> +
There are some trailing whitespaces here and elsewhere.
Otherwise looks good.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2023-07-26 9:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-24 7:52 Holger Assmann
2023-07-26 9:40 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230726094021.GG18491@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=h.assmann@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox