From: Marco Felsch <m.felsch@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 3/4] nvmem: ocotp: handle too early calls into ocotp driver gracefully
Date: Thu, 27 Jul 2023 08:05:02 +0200 [thread overview]
Message-ID: <20230727060502.sy46mutzo4enww3s@pengutronix.de> (raw)
In-Reply-To: <20230726192718.911735-3-a.fatoum@pengutronix.de>
On 23-07-26, Ahmad Fatoum wrote:
> HAB code calls into OCOTP driver by relying on a global imx_ocotp
> variable that's populated on driver probe.
>
> For board code that calls a HAB function to early, this may end up
> dereferencing a NULL pointer, so let's return -EPROBE_DEFER in that
> case or if deep probe is enabled, just probe the OCOTP directly.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> drivers/clk/imx/clk-vf610.c | 5 ++++-
> drivers/nvmem/ocotp.c | 41 +++++++++++++++++++++++++++++++++++--
> include/mach/imx/ocotp.h | 2 +-
> 3 files changed, 44 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
> index 89899e0dc9b4..112f64df9b74 100644
> --- a/drivers/clk/imx/clk-vf610.c
> +++ b/drivers/clk/imx/clk-vf610.c
> @@ -568,13 +568,16 @@ static int vf610_switch_cpu_clock_to_400mhz(void)
> static int vf610_switch_cpu_clock(void)
> {
> int ret;
> - bool sense_enable;
> + int sense_enable;
> uint32_t speed_grading;
>
> if (!of_machine_is_compatible("fsl,vf610"))
> return 0;
>
> sense_enable = imx_ocotp_sense_enable(true);
> + if (sense_enable < 0)
> + return sense_enable;
> +
> ret = imx_ocotp_read_field(VF610_OCOTP_SPEED_GRADING, &speed_grading);
> imx_ocotp_sense_enable(sense_enable);
> if (ret < 0)
> diff --git a/drivers/nvmem/ocotp.c b/drivers/nvmem/ocotp.c
> index 8ba7a8af5da5..c22e5d9585fa 100644
> --- a/drivers/nvmem/ocotp.c
> +++ b/drivers/nvmem/ocotp.c
> @@ -14,6 +14,7 @@
> */
>
> #include <common.h>
> +#include <deep-probe.h>
> #include <driver.h>
> #include <malloc.h>
> #include <xfuncs.h>
> @@ -497,11 +498,17 @@ static void imx_ocotp_field_decode(uint32_t field, unsigned *word,
> *mask = GENMASK(width, 0);
> }
>
> +static int imx_ocotp_ensure_probed(void);
Nit: Move the function definition here?
Regards,
Marco
> int imx_ocotp_read_field(uint32_t field, unsigned *value)
> {
> unsigned word, bit, mask, val;
> int ret;
>
> + ret = imx_ocotp_ensure_probed();
> + if (ret)
> + return ret;
> +
> imx_ocotp_field_decode(field, &word, &bit, &mask);
>
> ret = imx_ocotp_reg_read(imx_ocotp, word, &val);
> @@ -524,6 +531,10 @@ int imx_ocotp_write_field(uint32_t field, unsigned value)
> unsigned word, bit, mask;
> int ret;
>
> + ret = imx_ocotp_ensure_probed();
> + if (ret)
> + return ret;
> +
> imx_ocotp_field_decode(field, &word, &bit, &mask);
>
> value &= mask;
> @@ -541,14 +552,27 @@ int imx_ocotp_write_field(uint32_t field, unsigned value)
>
> int imx_ocotp_permanent_write(int enable)
> {
> + int ret;
> +
> + ret = imx_ocotp_ensure_probed();
> + if (ret)
> + return ret;
> +
> imx_ocotp->permanent_write_enable = enable;
>
> return 0;
> }
>
> -bool imx_ocotp_sense_enable(bool enable)
> +int imx_ocotp_sense_enable(bool enable)
> {
> - const bool old_value = imx_ocotp->sense_enable;
> + bool old_value;
> + int ret;
> +
> + ret = imx_ocotp_ensure_probed();
> + if (ret)
> + return ret;
> +
> + old_value = imx_ocotp->sense_enable;
> imx_ocotp->sense_enable = enable;
> return old_value;
> }
> @@ -994,6 +1018,19 @@ static __maybe_unused struct of_device_id imx_ocotp_dt_ids[] = {
> };
> MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
>
> +static int imx_ocotp_ensure_probed(void)
> +{
> + if (!imx_ocotp && deep_probe_is_supported()) {
> + int ret;
> +
> + ret = of_devices_ensure_probed_by_dev_id(imx_ocotp_dt_ids);
> + if (ret)
> + return ret;
> + }
> +
> + return imx_ocotp ? 0 : -EPROBE_DEFER;
> +}
> +
> static struct driver imx_ocotp_driver = {
> .name = "imx_ocotp",
> .probe = imx_ocotp_probe,
> diff --git a/include/mach/imx/ocotp.h b/include/mach/imx/ocotp.h
> index 7c72edfb22a7..5f7b88f716a7 100644
> --- a/include/mach/imx/ocotp.h
> +++ b/include/mach/imx/ocotp.h
> @@ -35,7 +35,7 @@
> int imx_ocotp_read_field(uint32_t field, unsigned *value);
> int imx_ocotp_write_field(uint32_t field, unsigned value);
> int imx_ocotp_permanent_write(int enable);
> -bool imx_ocotp_sense_enable(bool enable);
> +int imx_ocotp_sense_enable(bool enable);
>
> static inline u64 imx_ocotp_read_uid(void __iomem *ocotp)
> {
> --
> 2.39.2
>
>
>
next prev parent reply other threads:[~2023-07-27 6:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-26 19:27 [PATCH 1/4] commands: hab: check for error in imx_hab_device_locked_down Ahmad Fatoum
2023-07-26 19:27 ` [PATCH 2/4] HAB: guard against NULL imx_hab_ops in imx_hab_device_locked_down() Ahmad Fatoum
2023-07-26 19:27 ` [PATCH 3/4] nvmem: ocotp: handle too early calls into ocotp driver gracefully Ahmad Fatoum
2023-07-27 6:05 ` Marco Felsch [this message]
2023-07-27 6:26 ` Ahmad Fatoum
2023-07-26 19:27 ` [PATCH 4/4] hab: habv4: export function to query HAB state Ahmad Fatoum
2023-07-27 6:05 ` [PATCH 1/4] commands: hab: check for error in imx_hab_device_locked_down Marco Felsch
2023-07-28 6:09 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230727060502.sy46mutzo4enww3s@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox