From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 22/22] ARM: multi_v8_defconfig: Enable K3 SoCs
Date: Thu, 3 Aug 2023 12:50:03 +0200 [thread overview]
Message-ID: <20230803105003.4088205-23-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20230803105003.4088205-1-s.hauer@pengutronix.de>
This enabled everything necessary for running barebox on K3 SoCs
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/configs/multi_v8_defconfig | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/configs/multi_v8_defconfig b/arch/arm/configs/multi_v8_defconfig
index 77ad8a2688..f539ea3a51 100644
--- a/arch/arm/configs/multi_v8_defconfig
+++ b/arch/arm/configs/multi_v8_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARCH_ARM64_VIRT=y
CONFIG_ARCH_IMX=y
+CONFIG_ARCH_K3=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_MACH_INNOCOMM_WB15=y
@@ -15,6 +16,7 @@ CONFIG_MACH_TQ_MBA8MPXL=y
CONFIG_MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP=y
CONFIG_MACH_ZII_IMX8MQ_DEV=y
CONFIG_IMX_IIM=y
+CONFIG_MACH_BEAGLEPLAY=y
CONFIG_MACH_RK3568_EVB=y
CONFIG_MACH_RK3568_BPI_R2PRO=y
CONFIG_MACH_PINE64_QUARTZ64=y
@@ -23,7 +25,6 @@ CONFIG_MACH_RADXA_ROCK5=y
CONFIG_MACH_RADXA_CM3=y
CONFIG_MACH_XILINX_ZCU104=y
CONFIG_MACH_XILINX_ZCU106=y
-CONFIG_64BIT=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_ARM_PSCI_CLIENT=y
CONFIG_MMU=y
@@ -173,11 +174,11 @@ CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_DUAL_ROLE=y
CONFIG_USB_EHCI=y
CONFIG_USB_STORAGE=y
+CONFIG_USB_ONBOARD_HUB=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_SERIAL=y
CONFIG_USB_GADGET_FASTBOOT=y
CONFIG_USB_GADGET_MASS_STORAGE=y
-CONFIG_USB_ONBOARD_HUB=y
CONFIG_VIDEO=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_DRIVER_VIDEO_BOCHS_PCI=y
@@ -208,8 +209,8 @@ CONFIG_HWRNG=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_ZYNQ=y
+CONFIG_PINCTRL_SINGLE=y
CONFIG_NVMEM_RMEM=y
-CONFIG_IMX_OCOTP=y
CONFIG_RAVE_SP_EEPROM=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED=y
@@ -221,14 +222,17 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_FIRMWARE_ZYNQMP_FPGA=y
CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_TI_SCI_PROTOCOL=y
CONFIG_GENERIC_PHY=y
CONFIG_USB_NOP_XCEIV=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_PCI=y
+CONFIG_MAILBOX=y
CONFIG_FS_CRAMFS=y
CONFIG_FS_EXT4=y
CONFIG_FS_TFTP=y
--
2.39.2
next prev parent reply other threads:[~2023-08-03 10:51 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-03 10:49 [PATCH 00/22] Add initial Texas Instruments K3 support Sascha Hauer
2023-08-03 10:49 ` [PATCH 01/22] pm_domain: Add onecell support Sascha Hauer
2023-08-03 10:49 ` [PATCH 02/22] gpio: davinci: Redesign driver to accommodate ngpios in one gpio chip Sascha Hauer
2023-08-03 10:49 ` [PATCH 03/22] gpio: davinci: Add support for GPIO controllers on TI K3 SoCs Sascha Hauer
2023-08-03 10:49 ` [PATCH 04/22] ARM64: Add support for debug_ll on TI AM62x SoCs Sascha Hauer
2023-08-03 10:49 ` [PATCH 05/22] Add initial mailbox support Sascha Hauer
2023-08-03 10:49 ` [PATCH 06/22] mailbox: Add TI K3 Secure Proxy Driver Sascha Hauer
2023-08-03 10:49 ` [PATCH 07/22] serial: ns16550: Add support for UARTs on K3 SoCs Sascha Hauer
2023-08-03 10:49 ` [PATCH 08/22] firmware: Add basic support for TI System Control Interface (TI SCI) protocol Sascha Hauer
2023-08-03 10:49 ` [PATCH 09/22] lib: Add generic binary search function Sascha Hauer
2023-08-03 10:49 ` [PATCH 10/22] clk: Add K3 SCI clock driver Sascha Hauer
2023-08-03 10:49 ` [PATCH 11/22] soc: ti: Add ti_sci_pm_domains driver Sascha Hauer
2023-08-03 10:49 ` [PATCH 12/22] mci: fix define Sascha Hauer
2023-08-03 10:49 ` [PATCH 13/22] mci: make debugging output more useful Sascha Hauer
2023-08-03 10:49 ` [PATCH 14/22] mci: sdhci: Add common wait for idle function Sascha Hauer
2023-08-03 10:49 ` [PATCH 15/22] mci: sdhci: wait for idle before stopping clock Sascha Hauer
2023-08-03 10:49 ` [PATCH 16/22] mci: Add am654 SDHCI driver Sascha Hauer
2023-08-03 10:49 ` [PATCH 17/22] ARM: Add Texas Instruments K3 architecture Sascha Hauer
2023-08-03 10:49 ` [PATCH 18/22] ARM: k3: Add initial BeaglePlay board support Sascha Hauer
2023-08-03 10:50 ` [PATCH 19/22] ARM: k3: BeaglePlay: Work around non working SD card Sascha Hauer
2023-08-03 10:50 ` [PATCH 20/22] ARM: k3: BeaglePlay: generate FIT image Sascha Hauer
2023-08-03 10:50 ` [PATCH 21/22] doc: K3: Add documentation Sascha Hauer
2023-08-03 10:50 ` Sascha Hauer [this message]
2023-11-02 14:12 ` [PATCH 00/22] Add initial Texas Instruments K3 support Ahmad Fatoum
2023-11-03 7:36 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230803105003.4088205-23-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox