From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v1 2/2] ARM: skov-imx6: Remove unused board variants
Date: Thu, 28 Sep 2023 14:11:06 +0200 [thread overview]
Message-ID: <20230928121106.2584743-2-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20230928121106.2584743-1-o.rempel@pengutronix.de>
From: Sascha Hauer <s.hauer@pengutronix.de>
The board variants 12 and 18 are no longer used. Remove them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/skov-imx6/lowlevel.c | 136 ---------------------------
1 file changed, 136 deletions(-)
diff --git a/arch/arm/boards/skov-imx6/lowlevel.c b/arch/arm/boards/skov-imx6/lowlevel.c
index c9a695ced4..16809dd4a6 100644
--- a/arch/arm/boards/skov-imx6/lowlevel.c
+++ b/arch/arm/boards/skov-imx6/lowlevel.c
@@ -28,122 +28,6 @@ static void __udelay(int us)
/* ------------------------------------------------------------------------ */
-/*
- * Micron MT41K512M16HA-125 IT:E -> 8 GBit = 64 Meg x 16 x 8 banks
- *
- * Speed Grade Data Rate (MT/s) tRCD-tRP-CL tRCD(ns) tRP(ns) CL(ns)
- * -125 1600 11-11-11 13.75 13.75 13.75
- * (=800 MHz)
- *
- * Memory configuration used by variant:
- * - "Max Performance", 64 bit data bus, 1066 MHz, 4 GiB memory
- */
-static const struct mx6_ddr3_cfg skov_imx6_cfg_4x512Mb_1066MHz = {
- .mem_speed = 1066,
- .density = 8, /* GiBit */
- .width = 16, /* 16 bit data per device */
- .banks = 8,
- .rowaddr = 16, /* 64 k */
- .coladdr = 10, /* 1 k */
- .pagesz = 2, /* [kiB] */
- .trcd = 1375, /* 13.75 ns = 11 clocks @ 1.6 GHz */
- .trcmin = 4875, /* 48.75 ns = 39 clocks @ 1.6 GHz */
- .trasmin = 3500, /* 35 ns = 28 clocks @ 1.6 GHz */
- .SRT = 0,
-};
-
-static const struct mx6_ddr_sysinfo skov_imx6_sysinfo_4x512Mb_1066MHz = {
- .dsize = 2, /* 64 bit wide = 4 devices, 16 bit each */
- .cs_density = 32, /* four 8 GBit devices connected */
- .ncs = 1, /* one CS line for all devices */
- .cs1_mirror = 1, /* TODO */
- .bi_on = 1, /* TODO */
- .rtt_nom = 1, /* MX6_MMDC_P0_MPODTCTRL -> 0x00022227 */
- .rtt_wr = 0, /* is LW_EN is 0 in their code */
- .ralat = 5, /* TODO */
- .walat = 1, /* TODO */
- .mif3_mode = 3, /* TODO */
- .rst_to_cke = 0x23, /* used in their code as well */
- .sde_to_rst = 0x10, /* used in their code as well */
- .pd_fast_exit = 0, /* TODO */
-};
-
-static const struct mx6_mmdc_calibration skov_imx6_calib_4x512Mb_1066MHz = {
- .p0_mpwldectrl0 = 0x001a0017,
- .p0_mpwldectrl1 = 0x001F001F,
- .p0_mpdgctrl0 = 0x43040319,
- .p0_mpdgctrl1 = 0x03040279,
- .p0_mprddlctl = 0x4d434248,
- .p0_mpwrdlctl = 0x34424543,
-
- .p1_mpwldectrl0 = 0x00170027,
- .p1_mpwldectrl1 = 0x000a001f,
- .p1_mpdgctrl0 = 0x43040321,
- .p1_mpdgctrl1 = 0x03030251,
- .p1_mprddlctl = 0x42413c4d,
- .p1_mpwrdlctl = 0x49324933,
-};
-
-/* ------------------------------------------------------------------------ */
-
-/*
- * Micron MT41K256M16HA-125 IT:E -> 4 GBit = 32 Meg x 16 x 8 banks
- *
- * Speed Grade Data Rate (MT/s) tRCD-tRP-CL tRCD(ns) tRP(ns) CL(ns)
- * -125 1600 11-11-11 13.75 13.75 13.75
- * (=800 MHz)
- *
- * Memory configuration used by variant:
- * - "Max Performance", 64 bit data bus, 1066 MHz, 2 GiB memory
- */
-static const struct mx6_ddr3_cfg skov_imx6_cfg_4x256Mb_1066MHz = {
- .mem_speed = 1066,
- .density = 4, /* GiBit */
- .width = 16, /* 16 bit data per device */
- .banks = 8,
- .rowaddr = 15, /* 32 k */
- .coladdr = 10, /* 1 k */
- .pagesz = 2, /* [kiB] */
- .trcd = 1375, /* 13.75 ns = 11 clocks @ 1.6 GHz */
- .trcmin = 4875, /* 48.75 ns = 39 clocks @ 1.6 GHz */
- .trasmin = 3500, /* 35 ns = 28 clocks @ 1.6 GHz */
- .SRT = 0,
-};
-
-static const struct mx6_ddr_sysinfo skov_imx6_sysinfo_4x256Mb_1066MHz = {
- .dsize = 2, /* 64 bit wide = 4 devices, 16 bit each */
- .cs_density = 16, /* four 4 GBit devices connected */
- .ncs = 1, /* one CS line for all devices */
- .cs1_mirror = 1, /* TODO */
- .bi_on = 1, /* TODO */
- .rtt_nom = 1, /* MX6_MMDC_P0_MPODTCTRL -> 0x00022227 */
- .rtt_wr = 0, /* is LW_EN is 0 in their code */
- .ralat = 5, /* TODO */
- .walat = 1, /* TODO */
- .mif3_mode = 3, /* TODO */
- .rst_to_cke = 0x23, /* used in their code as well */
- .sde_to_rst = 0x10, /* used in their code as well */
- .pd_fast_exit = 0, /* TODO */
-};
-
-static const struct mx6_mmdc_calibration skov_imx6_calib_4x256Mb_1066MHz = {
- .p0_mpwldectrl0 = 0x001a0017,
- .p0_mpwldectrl1 = 0x001F001F,
- .p0_mpdgctrl0 = 0x43040319,
- .p0_mpdgctrl1 = 0x03040279,
- .p0_mprddlctl = 0x4d434248,
- .p0_mpwrdlctl = 0x34424543,
-
- .p1_mpwldectrl0 = 0x00170027,
- .p1_mpwldectrl1 = 0x000a001f,
- .p1_mpdgctrl0 = 0x43040321,
- .p1_mpdgctrl1 = 0x03030251,
- .p1_mprddlctl = 0x42413c4d,
- .p1_mpwrdlctl = 0x49324933,
-};
-
-/* ------------------------------------------------------------------------ */
-
/*
* Micron MT41K128M16JT-125 IT:K -> 2 GBit = 16 Meg x 16 x 8 banks
*
@@ -530,26 +414,6 @@ static void skov_imx6_init(int cpu_type, unsigned board_variant)
int instance;
switch (board_variant) {
- case 12: /* P2 i.MX6Q, max performance */
- if (cpu_type != IMX6_CPUTYPE_IMX6Q) {
- pr_err("Invalid SoC! i.MX6Q expected\n");
- return;
- }
- pr_debug("Initializing a P2 max performance system...\n");
- spl_imx6q_dram_init(&skov_imx6_sysinfo_4x256Mb_1066MHz,
- &skov_imx6_calib_4x256Mb_1066MHz,
- &skov_imx6_cfg_4x256Mb_1066MHz);
- break;
- case 18: /* i.MX6Q+ */
- if (cpu_type != IMX6_CPUTYPE_IMX6Q) {
- pr_err("Invalid SoC! i.MX6Q expected\n");
- return;
- }
- pr_debug("Initializing board variant 18\n");
- spl_imx6q_dram_init(&skov_imx6_sysinfo_4x512Mb_1066MHz,
- &skov_imx6_calib_4x512Mb_1066MHz,
- &skov_imx6_cfg_4x512Mb_1066MHz);
- break;
case 19: /* i.MX6S "Solo_R512M_F2G" */
if (cpu_type != IMX6_CPUTYPE_IMX6S) {
pr_err("Invalid SoC! i.MX6S expected\n");
--
2.39.2
next prev parent reply other threads:[~2023-09-28 12:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-28 12:11 [PATCH v1 1/2] ARM: i.MX6 MMDC: Add register offset comments to struct Oleksij Rempel
2023-09-28 12:11 ` Oleksij Rempel [this message]
2023-10-04 7:38 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230928121106.2584743-2-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox